Multiple processes on unix server even stop replicat, is that block port?
I have configured on source server Oracle goldengate manager/extract on port 7809 and same configured on target server with port 7809.
Now over the weekend, I encountered two problems.
1). tcp ip timeout from extract error log and extract abend.
test : telnet linuxserver 7809
$ telnet linuxserver 7809
Trying...
Connected to linuxserver.
Escape character is '^]'.
Connection closed.
It connected, then after a second, connection closed.
2). On target server, there are multiple processes for replicat existed even I stopped replicat and stopped manager. There are nothing running.
ps -ef|grep ggs
oracle 13595 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 14031 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 14447 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 14674 1335 0 13:34 pts/0 00:00:00 grep ggs
oracle 14962 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 15529 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 28295 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 28751 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 29158 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
I have to manually kill those processes by kill -9 on server.
How to control this manner?
thanks.
I have another quetion, in real life migration, our database have a lot clobs datatype, and logsegments, etc. What is the best practice or advices you can give to me?
I am probably not the best guy to answer this question.
Can I create multiple extracts on source and multiple replicat on source?
Yes.
Let's say we have 10 application users in the prod database, do I create at least extracts for each schema? then within each schema, I create multiple extracts to based on datatype or others?
Yes. You can create one Extract/Replicat group per schema. That would help in parallelizing the things.
Similar Messages
-
Just put in a new router and now my ipad 1 will not connect to the server. It is connected to the wifi though. Does this mean my ipad is too old? Any suggestions on what to do?
You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
Create a CR for multiple processing with me as the current processor
Hi
How to create a change request for multiple processing with myself as the current processor.
I have created a change request for multiple processing and the ystem throws me the error that "There are no suitable change requests"
Display help shows the below
For the upload you need a change request that has the status Considered
and Approved or To Be Revised and ideally has a type that does
not have the property Object List Is Binding. If the
change request does have this property, all the entities that are uploaded must
already be assigned to this object list.
Please can someoen guide me on how to fix this.
I found few threads related to this but cudint understand on how to assign a status to CR
Thanks,
SharmaHi Prateek,
Please can anyone give any pointers on how to set the status of change request (for multiple processing):-
For assigning the statuses to the change request:-
Go to t code:- MDGIMG->General settings>Process Modeling>Change Request>Edit status of change request.
the path you mentioned is to create and edit the existing Change request statuses, what I am looking for is when I create a CR for Multi record processing and try to upload a file I get the error "There are no suitable change requests". and when I check the Status of the change request I created I see that the status is Changes to be executed (Set automatically).
how can i set myself as the processor.
tcode: MDGIMG->General settings>Process Modeling>Change Request>Create Change request type. Ucheck the single object checkbox and assign your userid for that CR step.
Single object is already Unchecked and I am using BRF+ so when I am the processor First approver is say X, I am not sure if we have any place where we can set ourselves as the user. Please let me know if I missed sumting
Thanks
Hi Shephalika,
Yes I am trying to upload a file and Single object is Unchecked in the Change request type.
Thanks,
Sharma -
Multiple processes in the workflow
Hello Everyone.
Why do we require multiple Processes in a single Workflow? I see that in the seeded workflows, if i open a process, in the flow there will be another process which again might contain several different process attached to the same flow.
In realtime when do we require to use this functionality?
ThanksIt is not a requirement - it is simply a way of modularizing - just like how any piece of code can call other pieces of nested codes.
Srini -
I have a client with a BlackBerry Pearl 8110. It was (is) configured to receive email from a Microsoft Exchange Server via his Outlook account. I have uninstalled the Desktop Manager and re-installed ensuring the computer transmits his email via the Re-Director. All settings in the Desktop Manager are correct. The phone was working fine for over 5 years. Now he is getting emails both on his phone and in Outlook saying:
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
I have verified that his phone is not attempting to perform the Enterprise Activation process by checking :
Options > Advanced Options > Enterprise Activation.
He does however have a Service Book entitled "CMIME"
How can I resolve this issue?Is the user needing the Redirector service?
Step 1: If you're not using Redirector or Enterprise, you should uninstall Desktop Manager and then reinstall it using the BlackBerry Internet Service option.
Step 2: On your device, go to: Options > Advanced > Service Book, and delete all service books for [Desktop]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Need urgent help..Regarding targets in UNIX Server targets
Dear Dhana, Create the Targets Flat files in Informatica It's self. Please see the below schreen shot. Then You go to the Columns level you need select the "Add File Name Port" click it. Then you can go to the session level you need to mentation the target path example:-$PMTargetFileDir\ Please check it and let me know. Thanks & RegardsKasireddy+966545281845
Hi All, I need to extract data from three views to three targets in three pipelines in a single mapping. My targets are three flatfiles and need to generate with datetimestamp in a particular path of the UNIX server. My problem is first How I need to take the targets into Informatica powercenter?As of now I just have the names of files only and when I run the workflow they should be populated in the path of UNIX Server. How to do that?And how to generate the files with latest datetimestamp whenever I run the workflow? Thanks & Regards, JAS.
-
wireless authentication not working
I found the following in the radius
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 1/15/2014 2:07:57 AM
Event ID: 6273
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: NAP01.test.local
Description:
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: doamin \user.a
Account Name: user.a
Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 00-0F-7D-C4-45-20:staff
Calling Station Identifier: 0C-74-C2-EF-Dd-0B
NAS:
NAS IPv4 Address: 192.168.9.10
NAS IPv6 Address: -
NAS Identifier: -
NAS Port-Type: Wireless - IEEE 802.11
NAS Port: 497
RADIUS Client:
Client Friendly Name: wcont1
Client IP Address: 192.168.9.10
Authentication Details:
Connection Request Policy Name: Wireless
Network Policy Name: wism
Authentication Provider: Windows
Authentication Server: NAP01.test.local
Authentication Type: EAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 22
Reason: The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.
Please helpHi,
Anything updates?
In addition, this issue may also because your client didn't have CA certificate of your domain. Please make sure that your client has CA certificate.
Besides, the error "The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server" may be due to that the default maximum transmission unit that NPS uses for EAP payloads is 1500
bytes. You can lower the maximum size that NPS uses for EAP payloads by adjusting the Framed-MTU attribute in a network policy to a value no greater than 1344:
Configure the EAP Payload Size
Best regards,
Susie -
Where in migration process does old server stop functioning as primary server?
I am migrating from a SBS 2003 box to a new WS 2012 R2 Essentials box - following the instructions from
"Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience". What I need to know is where in the process does
the old server stop functioning as a server for my network. What I mean by this is when in the migration process (when I add the new server as a replicate DC? not until I demote the old server?) will any programs/databases on the old server no
longer be available to client computers?
Thanks for any insight.Yeah, we need to agree on what is meant by "the server". In Windows, Server means many different things. Each time you move, a role or feature from the "old" to the "new" the old server ceases to function as "the server"
for that role or feature. The basic functions of a Windows DC include Active Directory, 5 FSMO roles, file and print services, and application services to name just a few.
So the answer to your question is more to do with what you mean by "server". In particular, for the application role, you must move the app to the new server by whatever means the developer recommends. At that point, regardless of whatever
else is going on the old server is out of the picture for that application.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit. -
Multiple processes for a host instance on one server
Hi,
One of the prod environment server memory utilization is getting very high every few days. I searched a bit and found that there are many processes for "BTSNTSvc64.exe" in the task manager. Whenever we restart the host instance a new process is
getting created and the previous process is not getting killed.
This caused multiple processes in task manager and every process is occupying some memory. The process is actually not active but it is creating some bad sectors which is causing the Memory utlization to become high.
I am not able to kill the zombie processes either from Task manager. Server reboot is the option but wanted to know a permanent fix.
Can you please tell me the reason as to why this is happening and also the solution?How many BizTalk Hosts do you have defined on the system? If you have multiple Hosts defined then you're likely to see one host instance associated with each of the hosts. Each host instance is a service and in the "Task Manager" - Processes you will
see multiple BTSNTSvc64.exe OR BTSNTSvc.exe * 32. This is OK is you have multiple host instances defined on your system (Services MMC will show you BizTalk Service BizTalk Group : BizTalk Host) and BizTalk Administration Console ->BizTalk Group ->Platform
Settings -> Host Instances will also show you the different host instances. Each instance is a multi threaded process running different aspects of the BizTalk Framework/Components. So each process will occupy memory if it is "started". All this is normal
behavior. If you're facing performance issues, you might want to ask the solution designer on their rationale for the number of hosts instances.
So when you stop the service, it does not stop? goes into a non-responsive state? and creates another instance?
Regards. -
Oracle on Unix starting a process on Windows server
I have a situation where nightly processing is done by executables on a windows server while Oracle is on a Unix server. Can anyone tell me if I can get Oracle to start a process on the windows server please?
This question arises because I understand there are problems with window's own scheduling. I don't know what version of windows it is yet, but if anyone can reassure me about the reliability of windows scheduling on any version that would be great.
Thanks,
Jim.Hi,
I ran a few jobs for about a year using task scheduler on Windows 2000 without any issues. Database was running on Sun. But if your processes are really that important, have them write a log, analyze that log for any errors, and send an email indicating success or failure.
Regards,
Andrew Velitchko
BrainBench MVP for Developer/2000
http://www.brainbench.com -
User exit to write CJI3 output into Unix server in background processing
Hi Experts
How to write CJI3 (project actual cost) output ALV report into unix server in b/g processing.
Is there any user exit?
What is the user exit for adding the fields in CJI3 transaction.
Thanx
YugiHi Experts
How to write CJI3 (project actual cost) output ALV report into unix server in b/g processing.
Is there any user exit?
What is the user exit for adding the fields in CJI3 transaction.
Thanx
Yugi -
[svn] 3718: Make sure the server is stopped even when a unit test fails.
Revision: 3718
Author: [email protected]
Date: 2008-10-17 13:03:17 -0700 (Fri, 17 Oct 2008)
Log Message:
Make sure the server is stopped even when a unit test fails. Thanks to Alex for the fix.
Modified Paths:
blazeds/trunk/modules/core/build.xmlI had the same issue after upgrading from 10.7.2 to 10.7.3 and changing my main SSL cert.
The solution was to make sure the correct cert was listed in:
/etc/openldap/slapd.conf
as well as:
/etc/openldap/slapd.d/cn=config.ldif
It looks as though the slapd.conf file gets updated properly when you select an SSL cert in the Server Admin app, but the cn=config.ldif does not. That is the one that was hanging my server up.
Hope this helps! -
Is there a way to view, access and process files on a unix server from APEX
Hello all,
We are looking at retrieving (text)documents that are uploaded to a Unix server. The server is seperate from the server that hosts APEX. Would anyone know how to do this or point me to some examples?
ThanksIf you followed the instructions in the manual you would have configured Contacts to sync to an app on your computer such as Outlook or Address Book. Then all you would have to do is set the new phone to sync with the same app on the computer. If you didn't do this you are probably out of luck, although there are some 3rd party apps that can extract data from the backup if it is not encrypted.
-
Java application - processing files on different unix server
Hi,
I was wondering if it is possible to
a) read a file that is on a different unix server to the one that my java application is on
b) move a file from one directory on the remote unix server to another directory on the remote unix server
Regards,
sabretoothfor (b):
If I were you I would set up a FTP account for your app on the remote unix server. Then I would get my hands on a simple ftp framework
and simply:
Ftp ftp = new Ftp("UNIXHostIP", username, password);
ftp.connect();
ftp.moveRemoteFile("form here","to here");
ftp.disconnect();
some frameworks:
JScape, iNet Factory: com.jscape.inet.ftp.Ftp
/n software, IP*Works: ipworks.Ftp
Enterprise Distributed Technologies, Java FTP Client Library: com.enterprisedt.net.ftp.FTPClient
IBM alphaWorks, FTP Bean Suite: com.ibm.network.ftp.protocol.FTPProtocol
SourceForge, JFtp: net.sf.jftp.net.FtpConnection
The Jakarta Project, Jakarta Commons/Net: org.apache.commons.net.ftp.FTPClient
JavaShop JNetBeans: jshop.jnet.FTPClient
Sun, JDK: sun.net.ftp.FtpClient
Florent Cueto, JavaFTP API: com.cqs.ftp.FTP
Bea Petrovicova, jFTP: cz.dhl.ftp.Ftp
The Globus Project, Java CoG Kit: org.globus.io.ftp.FTPClient
I recomend JScape's INetFactory (Easy to use)
OR the one from Jakarta (Free)
IP*Works (TOP Quality at a price)
Check out http://www.javaworld.com/javaworld/jw-04-2003/jw-0404-ftp.html
for a complete review of all the ftp frameworks
Firewalls?
make a folder that is public on the unix server-ie falls outside the firewall if there is one (fire walls might cause problems for you)
Unless you know the password to get through the Proxy then this should not be a problem. -
Process Invocation within multiple process server machines
Is there a way to invoke a process which is located at another server machine from an existing process engine?
The idea is similar to subprocess, however the "subprocess" here needs to be located at another machine for the purpose of ownership and security.
Sun's reply on this is through Web Services. Anyone experienced this with any other approach?You reference a subprocess using an alias. The
alias definition includes the process engine on
which that process executes and that process engine
can be running on any machine that is a node in the
environment of that IS EAI installation.
Robert
Maybe you are looking for
-
New field in Cj20n getting populated but not in cj01.
Hello All, I need to enhance a standard transaction CJ01, CJ02, CJ03, CJ20N by adding certain new fields to that. I also need to add these fields to master tables PRPS and PROJ. I also need to ensure that the new fields get populated in tables PRPS a
-
Could not complete the music store request the store may be busy
please answer soon
-
How do you handle workstation monitoring?
I've been in IT for almost a year now, and am the only IT staff in my office. While I've been getting my sea legs so to speak, we've had a MSP help monitor/patch our workstations. Since I've been handling workstation support and troubleshooting well,
-
No puedo ver todas las fotos en el carrete y solo veo las agregadas recientemente en el whatsapp
no existe un album para ver todas las fotos juntas. en whatsapp solo me deja enviar fotos agregadas recientemente.
-
How do you import from a dv tape camcorder in PE 13
Can't find a way to import dv tape into PE 13