Multiple Queries on the same WB-sheet - overlapping/overwriting

Hi experts,
we need to create a workbook with more than one query on a single workbook-sheet.
Unfortunately the cell-range needed by the queries is not static or good predictable.
The problem is that if you position 2 analysis-tables below each other, it might happen that
the first/upper one grows into the cell-range of the 2nd analysis-table. Hence the both tables
overlap and overwrite each other.
BEx Analyzer 3.5 had a solution for this problem - the 2nd table was shifted down and always
started after the (dynamic) end of the 1st analysis-table. Such a function seems to be missing in BEx-Analyzer 7.
Is there a common solution for this issue?
How did you solve such cases?
Thanks for your input in advance,
kind regards,
Marco
P.S.:
For beeing correct:
The 2nd table overlaps/overwrites the 1st one - because it is refreshed later.

Good afternoon Marco,
Have you tried using 'Clipping' where the screen is clipped to the size required and then the use of 'Scroll Bars' allows the resulting field toexpand as such without overwriting a second query within the same page. The actual outer size of the first query does not expand but using scroll bars, you can see more results .....
There is some documentation on this in the help.sap.com website ..:
http://help.sap.com/saphelp_nw70/helpdata/EN/85/1321d0b7864766b5208a0b221a7608/frameset.htm
goto the very bottom of the page ..
Would this help your scenario?
Regards,
Karen

Similar Messages

HT1766 can you have multiple iPhones in the same iTunes account without overwriting each phones content?

Can you have multiple iPhones in the same iTunes account without overwriting each phones content?

Hi sandexpress,
As Ocean20 indicates, you want to make sure that you have automatic syncing turned off. In iTunes Preferences under Devices, make sure you have "Prevent iPods, iPhones, and iPads from syncing automatically" checked. Then connect each iPhone, and make sure that "Manually Manage Music and Videos" is checked on the Info page for each of them. Then go into each page for each device, and select what you want to sync to that particular device. (you would do this one device at a time - complete the steps for one of the phones, then connect the next one and do the same thing).
With this kind of setup, you can modify what will sync at any given time for a particular device once you have connected it to iTunes, but before you click on the Sync button at the bottom of the screen. If you want to change some sync options on a particular device, you would just go into the page you wanted to change (Music, Photos, Apps, etc.), make your changes, and then Sync.
If you do not have any changes, you can just hook up the phone and click on Sync.
Hope this helps.
Cheers,
GB

Printing one address multiple times on the same label sheet

Does anyone know how to print the same address on all 20 labels of a label sheet. So far I can only figure out how to print 20 different addresses. Any help would be appreciated. Thx.

Greetings,
That's not a feature of Address Book. You can do that with a program called pearLabelizer, which is free. If you want to print groups from Address Book, it pulls the information for you and prints the labels; if you just want to print one address onto multiple labels, you can type it in or paste it in from somewhere, select all the labels and then Print and it will be done for you.

Multiple running queries at the same time

Hi!
I looked around (and RTM) for this but didn't find anything, so I'm asking here.
I have quite a few long running queries (data loading and such things, warehousing stuff), and I need to be able to run multiple queries/statements at the same time. In TOAD I can do this, start a procedure and while it is running I can do SQL statements in another session tab (it supports threaded sessions - it starts queries in their own background thread/session).
When I start a long running procedure or query in SQL Developer I can not do anything until the procedure execution finishes. Is there any way (setting/preference) to enable SQL Developer to be able to run multiple queries at the same time?
I really would like to move away from TOAD, but this is a major showstopper for me.
Thanx for any tips.
Alex

Hi!
This post is going to be a little longer, but I have to clarify things out.
I did not mean to throw any wild accusations, because I did my fair share of RTFM and searching the help. I can tell you that if you put any of these in the help search box:
session
non shared
non-shared
connection
concurrent <- I guess this one should yeld something
multiple
spawn
you won't find anything usefull, the article that comes closest, is this:
"Sharing of Connections
By default, each connection in SQL Developer is shared when possible. For example, if you open a table in the Connections navigator and two SQL Worksheets using the same connection, all three panes use one shared connection to the database. In this example, a commit operation in one SQL Worksheet commits across all three panes. If you want a dedicated session, you must duplicate your connection and give it another name. Sessions are shared by name, not connection information, so this new connection will be kept separate from the original."
It does not mention any spawning of non-shared connections from the current one, nor it does mention using a accelerator key combo. But since there could be written something about it, I guess you could call it a documentation bug, because it does not provide any clue to this functionality. The help is definitely of no help in this case. As you can see, I do not throw accusations without trying to find out something first. I guess if someone is not as deep into SQL Developer as you are, there is no way for him/her to know this.
OK, I tried your suggestion, and (sadly) it does not work as I suppose it should.
Here's what I did:
- start a new connection, and enter the following code in SQL Worksheet:
declare
j number;
begin
for i in 1..1000000
LOOP
j := sin(i);
end LOOP;
end;
As you can see, it doesn't do much besides holding the connection busy for a while when executed.
- start a new non-shared connection from the first one using CTRL-SHIFT-N (as you suggested) and put the following statement in the new SQL Worksheet (with "__1" appended to connection name)
select sysdate from dual;
- go to the first SQL Worksheet and execute the procedure
- while the procedure is executing, go to the second SQL Worksheet and hit F9.
The sysdate is returned as soon as the first SQL Worksheet finishes and not any sooner. It may run in separate session, but the result is not returned before the other session is finished doing what it is doing. I guess the correct behaviour would be to return the sysdate immediately.
I verified this behaviour repeating it 3 times starting with a new instance of SQL Developer, each time connecting to another schema and spawning the new non-shared session. The database used was Oracle 10.2.0.3 EE on RHEL 4 UPD3.
The concurrent execution lacks concurrency. The statements might be executed concurently on the database (i did not went the extra mile to verfiy this), but the returning of results is just not independent of other sessions. To the end user this is as much concurrent as it is serial execution.
I hope developers get this issue straightened out soon, as I said, I'd love to move away from Toad, but I'll have to wait until they fix this out.
Is there anything else that can be done to make it behave correctly?
Kind regards
Alex

How to insert two queries in the same workbook in new BI 7.0 Bex web analy

Hi
Can you please advise how to insert multiple queries in the same workbook in BI 7.0 web analyser.
Sarah

Hi,
You need to switch to design mode (BEx Analyser Menu - Design Toolbar - Design Mode). For each query that you want to embed, insert an analysis grid item in the workbook. Link each analysis grid to its corresponding data provider (query).
Hope this helps.
Regards,
Rajkandula

Workbook: overlapping of 2 queries in the same sheet

I've 1 Workbook and I want to insert 2 queries in the same sheet.
The query B must follow the query A.
Now, I've inserted the query B bottom of query A.
When refresh the workbook query B don't follow in a dynamic way the end of Result Area of query A.
The final result is an overlapping of query A on query B!!!
Do you know a solution of this problem?

Hi Claudio, I hope that Eugene's answer fixed your problem.
Another solution is: move the result area of query 2 each time that query 1 is finished refreshing.
To do this, you need to know the local queryID of each query. Let's assume that the one which refreshes first has local queryID of SAPBEXq0001 and the one which refreshes second is SAPBEXq0002.
If this be the case (and it probably is not, so please check!), then BW knows the location of each query's result area using a Name in the Excel Workbook's Names collection. The names are:
SAPBEXqueries!SAPBEXq0001
SAPBEXqueries!SAPBEXq0002
When query 1 refreshes, BW will run a Subroutine named SAPBEXonRefresh. Find that subroutine, and in it, add the following code.
Dim ws as Worksheet, wb as Workbook
If queryID = "SAPBEXq0001" Then
set ws = resultArea.Parent
set wb = ws.Parent
firstCol = resultArea.Cells(1).Column
numCells = resultArea.Cells.Count
lastRow = resultArea.Cells(numCells).Row
nextRow = lastRow + 2 'or whatever space you want
wb.Names("SAPBEXqueries!SAPBEXq0002").RefersToRange.Clear
ws.Cells(nextRow, firstCol).Name = _
"SAPBEXqueries!SAPBEXq0002"
End If
Now, no matter what, the results for the second query will always appear exactly 2 rows below the results of the first query.
- Pete
Message was edited by: Peter Knoer

CRVS2010 - open multiple rpts at the same time, like sheets in a xls file ?

Hi all,
is that possible to open multiple reports at the same time, like sheets in a excell file ?
Is that possible create tabs beside the MainReport tab ? or include reports in the Group Tree ? how can I do it ?
The application is in asp.net with VS2010 and CR2010.
The reports used to be in excell with three sheets and now we are migrating them to crystal reports, how can I create the report with those three sheets ?
thanks !
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Aug 31, 2010 7:33 AM

I'll make the suggestion to the Program Management group.
You may want to do a post to the [Crystal Reports Design|SAP Crystal Reports; forum and ask them how they's fake that sort of a requirement. E.g.; there may be some way to make this report look the way you want, but it will be best to ask the experts. Don't mention CRVS2010 as they don't support it and most likely you will not get an answer.
Ludek

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

no - you simply have to select the option to print mucliples of a photo on a page
select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
LN

In iPhoto 9.5.1, how do I print multiple copies of the same photo on a sheet ?

In iPhoto 9.5.1, how do I print multiple copies of the same photo on a sheet ?
I am somehow missing the "settings" which allowed me to do this in earlier versions.
Grateful for any hints. Thank you. Znon

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
You can only do it by duplicating the photos "n-1" times to make "n" prints and selecting all copies then print
LN

How do I print multiple copies of the same photo on one page or a contact sheet. The directions in help don't work

I want to print multiple copies of the same photo on a page. The directions in help don't work
Help

What version of iPhoto?
The general process is to select the photo and print, select the printer, paper size and print size and click customize and under settings selec multiples copies of a photo (the preview will reflect this choice) and click print to print, make any printer specific selections and click print to print
LN

How can I have use the same div ID multiple times on the same page?

Okay so a problem I encounter a lot is that often times I want to use the same div ID several times on the same page. An example of this is when I'm creating table like designs.
Let's say for instance I create a div ID called 'product-container'. I want to use 'product-container' multiple times on the same page but if I do this it is improper XHTML and will throw errors in any XHTML validator (you are only allowed to use a div ID once on any XHTML page in order for it to be standards compliant).
Now the first option is that I could define 'product-container' in my CSS style sheet multiple times by doing something like this...
#product-container {
     width: 300px;
#product-container-2 {
     width: 300px;
#product-container-3 {
     width: 300px;
#product-container-4 {
     width: 300px;
What you will see there however is that it seems pointless to define the same ID numerous times over (just adding a number on the end) when each ID is the exact same thing and has the exact same attributes.
Now what I have noticed is that there are some sites out there who manage to have the same ID appear several times in the code but add a number to it just like above. The difference is that they only have one definition for 'product-cointainer' in their CSS document but in their actual XHTML code they have IDs for 'product-container' but with numbers on the end like 2,3,4,5, etc. It's almost as if JavaScript or some other code is automatically appending a number on the end of the ID so the validator won't consider the markup to be invalid, but yet it knows that it's using the same 'product-container' style that is contained in the CSS style sheet.
I hope I explained this correctly. I'm just hoping to find a way that I can put the same div ID on a page multiple times without having to define it over and over again in my CSS.
Any help is much appreciated!

Because it seems like by using a class you can't make this position as
well as you can by using an ID. Am I wrong?
An ID name can be used only one time per page. A class name can be used multiple times per page.
.product {
width: 300px;
text-align:left;
color: #FF0000
border: 2px solid #666;
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How to configure multiple clusters on the same machine.

I am attempting to configure multiple clusters on the same set of machines. I have set the cluster name and multicase IP addresses to be different for each cluster. However I am still getting and error that states:
"This indicates that there are multiple clusters on this network attempting to use overlapping network configurations."
Is this not possible? If it is possible, is there some further way i need to tell the VMs they are part of different clusters?
Thanks,
Jacob

FYI: I'm using the wrong multicast IP above. 224.0.0.1 is reserved and something else should be used. See:
Re: UDP flood hosed my LAN?

Best practice for multiple instances of the same BEX query

Hi there,
I'm wondering what's the best way to use multiple instances of the same BEX query. Let me explain what I mean:
I have a dashboard with different queries feeding different period of time such as: week to date, month to date and so on. One query for each since it is based on a user exit.
For each query I want to show different data in different sections of my dashboard. Per example: sales per directors or sales per customer group, sales per day, sales per week and the like.I tried to connect a simple bar chart via a direct connection but with no success due to the multiple lines generated by the addition of the sales director, customer group, week number and so on.
My question is about the way to connect the different queries efficiently in order to show the different data while avoiding multiple useless lines.
The image above shows the query browser where, per example, for a Month to date query there will be mutiple line for each week as well as one line for each director. If, for two different components, I want to show data per week and data per director or other representation what is the best practice:
Add another instance of the same query and only put the week information and another one will only the director info?
Should I bind those to the excel file and use formulas to make final calculations?
Will there be a performance issues for adding different instances of the same query
I have 6 different queries (read 6 user exit that filters time via user exit).
Depending on the best practices there might be 4 instances for each for a total of 24 instances in the query browser.
I hope my question is clear enough, if not please do not hesitate I'll clarify as much as possible.
Regards,
Steve

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

How to carry out multiple searches on the same engine simultaneously.

As mentioned above. I'm looking for a way to search multiple text at the same time.

Can you give a more detailed example of what you mean?
For example:
* Do you want to type query #1 into the search box or address bar and open it in results tab #1, then type query #2 into the search box or address bar and open it in results tab #2? To do that, hold down the Alt key when pressing Enter or hold down the Ctrl key when clicking the icon that submits your search.
* Do you want to combine numerous queries into a single request to Google and get the results all mixed together? You can use OR (must be in capital letters) with quotation marks or parentheses for grouping. For example: Android OR ios OR "windows phone"
* Something else?

Timesten replication with multiple interfaces sharing the same hostname

Hi,
we have in our environment two Sun T2000 nodes, running SunOS 5.10 and hosting a TT server currently in Release 7.0.5.9.0, replicated between each other.
I would like to have some more information on the behavior of the replication w.r.t. network reliability when using two interfaces associated to the same hostname, the one used to define the replication element.
To make an example we have our nodes sharing this common /etc/hosts elements:
151.98.227.5 TBMAS10df2 TBMAS10df2-10 TBMAS10df2-ttrep
151.98.226.5 TBMAS10df2 TBMAS10df2-01 TBMAS10df2-ttrep
151.98.227.4 TBMAS9df1 TBMAS9df1-10 TBMAS9df1-ttrep
151.98.226.4 TBMAS9df1 TBMAS9df1-01 TBMAS9df1-ttrep
with the following element defined for replication:
ALTER REPLICATION REPLSCHEME
ADD ELEMENT HDF_GNP_CDPN_1 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS9df1-ttrep"
SUBSCRIBER tt41data ON "TBMAS10df2-ttrep"
RETURN RECEIPT BY REQUEST
ADD ELEMENT HDF_GNP_CDPN_2 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS10df2-ttrep"
SUBSCRIBER tt41data ON "TBMAS9df1-ttrep"
RETURN RECEIPT BY REQUEST;
On this subject moving from 6.0.x to 7.0.x there has been some changes I would like to better understand.
6.0.x reported in the documentation for Unix systems:
If a host contains multiple network interfaces (with different IP addresses),
TimesTen replication tries to connect to the IP addresses in the same order as
returned by the gethostbyname call. It will try to connect using the first address;
if a connection cannot be established, it tries the remaining addresses in order
until a connection is established.
Now On Solaris I don't know how to let gethostbyname return more than one interface (the documention notes at this point:
If you have multiple network interface cards (NICs), be sure that “multi
on” is specified in the /etc/host.conf file. Otherwise, gethostbyname will not
return multiple addresses).
But I understand this could be valid for Linux based systems not for Solaris.
Now if I properly understand the above, how was the 6.0.x able to realize the first interface in the list (using the same -ttrep hostname) was down and use the other, if gethostbyname was reporting only a single entry ?
Once upgraded to 7.0.x we realized the ADD ROUTE option was added to teach TT how to use different interfaces associated to the same hostname. In our environment we did not include this clause, but still the replication was working fine regardless of which interface we were bringing down.
My both questions in the end lead to the same doubt on which is the algorithm used by TT to reach the replicated node w.r.t. entries in the /etc/hosts.
Looking at the nodes I can see that by default both routes are being used:
TBMAS10df2:/-# netstat -an|grep "151.98.227."
151.98.225.104.45312 151.98.227.4.14000 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.47307 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.48230 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.46050 151.98.227.4.14005 1049792 0 1049800 0 ESTABLISHED
TBMAS10df2:/-# netstat -an|grep "151.98.226."
151.98.226.5.14000 151.98.226.4.47699 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.14005 151.98.226.4.47308 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.44949 151.98.226.4.14005 1049792 0 1049800 0 ESTABLISHED
Tried to trace with ttTraceMon but once I brought down one of the interfaces did not see any reaction on either node, if you have some info it would be really appreciated !
Cheers,
Mike

Hi Chris,
Thanks for the reply, I have few more queries on this.
1.Using the ROUTE CLAUSE we can use multiple IPs using priority level set, so that if highest priority level set in thr ROUTE clause for the IP is not active it will fall back to the next level priority 2 set IP. But cant we use ROUTE clause to use the multiple route IPs for replication simultaneously?
2. can we execute multiple schema for the same DSN and replication scheme but with different replication route IPs?
for example:
At present on my system, I have a replication scheme running for a specific DSN with stand alone Master-Subscriber mechanism, with a specific route IP through VLAN-xxx for replication.
Now I want to create and start another replication scheme for the same DSN and replication mechanism with a different VLAN-yyy route IP to be used for replication in parallel to the existing replication scheme. without making any changes to the pre-existing replication scheme.
for the above scenarios, will there be any specific changes respective to the different replication schema mechanism ie., Active Standby and Standalone Master Subscriber mechanism etc.,
If so what are the steps. like how we need to change the existing schema?
Thanks In advance.
Naveen

Multiple Queries on the same WB-sheet - overlapping/overwriting

Similar Messages

Maybe you are looking for