Printing one address multiple times on the same label sheet

Does anyone know how to print the same address on all 20 labels of a label sheet. So far I can only figure out how to print 20 different addresses. Any help would be appreciated. Thx.

Greetings,
That's not a feature of Address Book. You can do that with a program called pearLabelizer, which is free. If you want to print groups from Address Book, it pulls the information for you and prints the labels; if you just want to print one address onto multiple labels, you can type it in or paste it in from somewhere, select all the labels and then Print and it will be done for you.

Similar Messages

Printing One Address Multiple Times

Hi All,
I am using the label format portion of Oracle Reports and I am trying to display/print one address multiple times based on the user's input. Is this possible? Any coding example would be greatly appreciated. Thank you for your help in advance.
Michael James

You could pass this value as a parameter to the report and add a where clause to the report that limited the numbers returned based on this parameter. This is essentially what Kevin's doing in his example (the reference to :copies_required).
Incidentally, there's another way to do this without creating a new table of integers. You can get the same result by using the rownum pseudo column (as long as you have a table with at least as many rows as the number of times you want the address to repeat). You can then create one driving query:
select rownum from table
where rownum <= :number_of_copies
and a detail query:
select address from address_table
Link these queries with a group link and generate a default layout. Delete any columns in the 'rownum' repeating frame and run - you should get the address repeated the number of times specified in :number_of_copies.
Hope this helps,
Danny

How to play one clip multiple times at the same time?

I am writing a little game where a certain sound has to be played quite frequently. I load it as a Clip and play it with
myClip.setFramePosition(0);
myClip.loop(0);If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?
Edited by: andrasz on Feb 27, 2009 12:37 AM

If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?Ummmm, if you're using a clip, you'll have to maintain one copy per object that needs to play the sound concurrently. You could keep one master copy, and then create copies of the clip as necessary to play them, and then just dump the copies to decrease memory consumption.
A second idea would be to write your own Clip class. Esentially, all you would need to do is dump some sound data onto a TargetDataline to play it. It'll handle the buffering and playing at the correct speed itself. If that's all you did, you should be able to dump multiple times from the same instance and play it multiple times.
Obviously, that's just a theory. In practice, it may not work that way...

How can I have use the same div ID multiple times on the same page?

Okay so a problem I encounter a lot is that often times I want to use the same div ID several times on the same page. An example of this is when I'm creating table like designs.
Let's say for instance I create a div ID called 'product-container'. I want to use 'product-container' multiple times on the same page but if I do this it is improper XHTML and will throw errors in any XHTML validator (you are only allowed to use a div ID once on any XHTML page in order for it to be standards compliant).
Now the first option is that I could define 'product-container' in my CSS style sheet multiple times by doing something like this...
#product-container {
     width: 300px;
#product-container-2 {
     width: 300px;
#product-container-3 {
     width: 300px;
#product-container-4 {
     width: 300px;
What you will see there however is that it seems pointless to define the same ID numerous times over (just adding a number on the end) when each ID is the exact same thing and has the exact same attributes.
Now what I have noticed is that there are some sites out there who manage to have the same ID appear several times in the code but add a number to it just like above. The difference is that they only have one definition for 'product-cointainer' in their CSS document but in their actual XHTML code they have IDs for 'product-container' but with numbers on the end like 2,3,4,5, etc. It's almost as if JavaScript or some other code is automatically appending a number on the end of the ID so the validator won't consider the markup to be invalid, but yet it knows that it's using the same 'product-container' style that is contained in the CSS style sheet.
I hope I explained this correctly. I'm just hoping to find a way that I can put the same div ID on a page multiple times without having to define it over and over again in my CSS.
Any help is much appreciated!

Because it seems like by using a class you can't make this position as
well as you can by using an ID. Am I wrong?
An ID name can be used only one time per page. A class name can be used multiple times per page.
.product {
width: 300px;
text-align:left;
color: #FF0000
border: 2px solid #666;
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

To print one photo multiple times on a single page

The title of my question is the title of the page in iPhoto 8 help.
"To print one photo multiple times on a single page"
It says (a bit shortened) 1. Select photo 2. Click print button 3. Select paper size 4. Select print size 5 Click Customize button 6 Click Settings button 7. Select "Multiple of same photo per page from the Photos Per Page pop-up menu. 8 Click OK 9 Click Print.
I can not find the pop-up menu referred to in Step 7. There are two "settings" buttons - neither produce a Photos Per Page pop-up menu. Settings appears if you click a double arrow to the right in the lower margin but only deals with font issues and "Print Settings" does not offer such a pop-up.
I am using Leopard on a PowerBook G4 and just bought and installed the newest iLife 8.
Grateful for help.

Arthur:
When you click on the Customize button there will be a Setting button in the next window. Click on it and in the drop down window that comes up will be the option to print multiple photos of the same photo per page.
Select that option and click OK. You'll get the spinning cursor for a few seconds as iPhoto creates the multiple copies on the page you selected. Be sure that the print size is small enough so that you can have multiple copies of it on the paper size you selected.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Using multiple timer in the same SessionBean

Hello,
Is it possible to use multiple timer in the same Stateless Session Bean. In my application a user can schedule some task to execute. To do so I was thinking of creating a Session Bean which would create calendar timer on user request and, when one of the timer expires, retrieve the task to execute thanks to the information stored in the timer.
When I tried the solution explained above, it seems that the @timeout method is synchronized on 1 timer. For example if I create a timer that will be executed every 10 seconds and another one executed every 30 seconds, the timeout callback is called every 30 seconds but 4 times.
My code looks like that :
@Stateless
@LocalBean
public class TimeManager {
    public void onUserRequest(ScheduleExpression expression) {
        Timer timer = timerService.createCalendarTimer(expression, timerCfg);
    @Timeout
    void timeout(Timer timer) {
        logger.log(Level.INFO, (String) timer.getInfo());
}Is there a way to do what I want?
Thank you

This doesn't make any sense to me. If i were to write a bunch of schemas for a particular applicaion, would
I have them all in the same namespace? You would normally have one schema that describes the information model associated with the one namespace that the different documents in your application use.
If so, why can't I load more than one in the same name space?The parser chooses the schema based on the namespace alone. There is no other information used to decide which schema to use, so you can only have one schema for the namespace.
They all have different root elements.You can have different root elements in the one schema.
I don't even need the namespaces, but I can't
figure out how to get rid of them (the schema isn't valid with out them according to XML Spy). You can set the schema explicitily before parsing, but not (AFAIK) set after parsing has begun, except by using the mapping of namespace to schema location.
I have also tried to use the external-noNameSpaceSchemaLocationproperty, but it doesn't seem like you can pass in an array of schemas to that one. It only expects a
String as the Object you pass in to setProperty. Yes, you can only validate a document against the one schema.
So, how can I load all my schemas so I don't have to reference them in the XML documents? Either combine your schemas so you have one schema for your namespace that validates elements which are defined in that namespace (the formal/correct way of doing it), or construct a filter that inserts a PI to point to the schema once the root element is opened (the pragmatic/bit of a hack way of doing it).
Pete

Tries to connect multiple times at the same time a...

Tries to connect multiple times at the same time after trying to reinstalling software.

Hello,
Assuming that you use a Web version (this information MUST be provided in any post), you have 2 ways to run reports:
1. the Run_Report_Object built-in
2. the Web.Show_Document() built-in
Francois

I can convert almost things multiple times at the same time including CMYK to RGB (or sRGB), but not RGB to CMYK and not brighten/contrast. How?

I can convert almost things multiple times at the same time including CMYK to RGB (or sRGB), but not RGB to CMYK and not brighten/contrast. How?

If you want a relevant answer you may have to elaborate on what you actually mean. Posting screenshots might help, too.
In any case multiple conversions of an image are not advisable in general.

Restricting users to login multiple times on the same machine..

Hi everyone,
Is it possible to restrict the users to login multiple times on the same machine...did someone implemented this kind of process.Please help me how can i achieve this or any suggestions.
Thanks in advance.
Phani..

Hello,
I decided to answer you in the original thread - Identify currently active users – as I believe that the outline background of the issue is important to better understand it.
Regards,
Arie.

Printing one photo multiple times on a single page

Hi I am trying to follow the instructions in iphoto HELP to let me print multiple copies of the same photo on one page. I can set it in the drop down menu but I can not see where to select the amount of photos on the page ie. 2, 4 6 of the same photo. Can anyone help ?

sorry I sorted it myself works ok now.

Itunes charged me multiple times for the same purchase. A message kept appearing that the bank records did not match my account information and each time charged me 5.16... it shows up on my bank account as a pre-authorized purchase 9 times.

I made a purchase of about 3 songs for the price of 5.16. Well when I was trying to download the songs a message kept appearing saying that "the account inforamtion does not match my bank records". Looking at my bank account 3 days later it shows up under my accout as pre-authorized charges 9 times. The post dates of these charges are not all today and these charges are pending transactions.
Why did they charge me nine times for the same purchase? And why is it charged for tomorrow?

This happend to me to---kept getting msg that info did not match bank records and I tried a few times then gave up THEN checked bank account and they charged me SIX TIMES
of course, you cannot even call them or email...its frustrating..I reported a problem under the songs bought but I have spent over half an hour on this trying to call etc....this is nuts

How to avoid triggering of a workflow multiple times at the same time?

Hello Workflow Gurus,
This is the situation.
I have a Notify requisition creator workflow. This workflow is triggered only when a PO is completely released(this Po is created with respect to a purchase req). I have implemented multiple release strategy in my PO workflow. Meaning, if a PO is created for 5 million, 4 entries are created in the release strategy(P0, P2, P3 and P4). Some approvers have authorization to approve P0 and some have authorization to release P2 etc. Before an approver can release P4, P0, P2 and P3 shuould be approved first.
My problem is when a approver has auth to release both P3 and P4, and if he hits the SAVE button, it is completely released and 2 notify req workflows are being triggered. I use the release indicator = 'C' (completely released) to trigger thos notify req creator workflow. In this case both workflows are triggered at the same time and date. I somehow have to say if this is triggered at the same date and time, complete one workflow.
BTW, I am not using any user exit to trigger this. This notify req creator WF is triggering event is "RELEASED'. When pO is completely released, 'RELEASED' event gets triggered which caused the notify req creator WF trigger.
How can I accomplish this?
Thanks
Rachana

Hi Rachana,
Another way you could acheive this is to use start conditions for your workflow. You could specify that your workflow should get triggered only for release codes = XX or release strategy = XX, etc.. This way even after 1 stage of approval, when the approver clicks on SAVE, the release codes change and because there is start conditions in the workflow that would prevent another instance of the workflow from getting triggered.
For example, in your case, I presume PO, P1, P2, etc are your release codes.
You can have a start condition in your workflow wherein you specify that the workflow should get only triggered for release code = P2 [assuming release code P2 is always the 1st stage of approval]. So, once the approver for P2 has completed and Saved, since there is a start condition, there wouldnt be any other workflow instance started. By this way, any stages of approval wouldnt cause another workflow to initiate.
Hope this is what you have been looking for ?
Satish

When I click or type in a valid link, I get the message "The URL is not valid and cannot be loaded." I have to reload/refresh the page one or more times until the same page loads.

This happens with small sites as well as major ones such as amazon.com. It happens frequently with many different websites both when typing in a URL or clicking on one from search results or other pages. If I am opening it in a new tab, the page is blank and the correct URL shows in the address bar even though it didn't load. When I get the message "The URL is not valid and cannot be loaded" I have to click okay and then click on the link again or click refresh. Sometimes it loads on the 2nd try; other times I have to refresh multiple times to get it to load.
Anyone know what is causing this or what will help?

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
See also http://kb.mozillazine.org/Error_loading_websites (Error_loading_some_websites)

How to show the region multiple times on the same page

Hi,
I have a PL/SQL Dynamic Content region which creates a report with custom layout using pl/sql web toolkit. The stored procedure takes the parameter and creates report. Can I display the same region multiple times by calling it from loop with different parameter each time ?
Thank you,
Asha

Hello Asha,
In your plsql you can do a loop, so you would only have one plsql region but in there that can generate different areas of your website.
e.g. it can loop and generate different divs or tables.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/

Problems printing one photo multiple times on a single page

Im trying to print multiple photos on a page so as to not waste paper. I have a 4 X 6 photo and want to print 2, 3X3 photos on the page. If you follow the HELP directions which are
Choose FILE > Print, Select paper Size, in my case 4X6. click on customize, Click Settings button then choose "Multiple of the same photo per page"
The "Multiple photo per page" option is grayed out. After troubleshooting it appears the software is telling me that two 3X3 photos cant fit in a 4X6 inch wide space and wont let me try. I was able to get around the problem by printing two 2.9 inch photos.
The software should be friendlier - Allow me to print 2 photos that are a exact fit to the paper. If the photo needs to be adjusted the software should do the adjustments in the background.
If Im having a problem here Im sure others are too.

Eric
Welcome to the Apple user to user assistance forums
Note that this is NOT a reporting path to Apple - iPhoto menu ==> provide iPhoto feedback to do that
No one but us users here - and I do not see a question in your post - just a rant and how you found a work around
Note that in general you DO NOT want software to change your specs - if you need a 3"x3" print you do not want the software to change it to 2.9" x 2.9" in the background - if it can not do what you requested then not doing it and having you adjust the request is the most appropriate path IMHO
LN

Printing one address multiple times on the same label sheet

Similar Messages

Maybe you are looking for