My MacBook Pro shuts down within seconds after starting with a Gray Screen and Apple Logo, a bar comes at the bottom.

My MacBook Pro starts with a Gray Screen and Apple Logo, a bar comes at the bottom, but after few seconds the machine shuts down. This was bought approx 1 year back. Please help!!

jayanta.ray,
which model MacBook Pro do you have (did you buy it new?), and which version of OS X is installed on it?

Similar Messages

  • Macbook pro shuts down two minutes after start up

    Hi
    Can anyone help with a problem on my Macbook Pro. I have had it for two days and loaded all of my info and set up everything as I would like it and it froze.
    I waited and waited and in the end had to power down. When I restarted it I get the spinning wheel for about two minutes then it just shuts off the power. I have tried to start in safe mode etc to no avail.
    I feel so unlucky with Apple as month ago I bought myself a new Imac and within three weeks the hard drive failed. They have replaced it with a new one but now this problem is making me feel unsure about Apple am I just unlucky? Thank you

    The forum you want MBP
    http://discussions.apple.com/category.jspa?categoryID=190
    Or try Using Snow Leopard also
    http://www.apple.com/support/macbookpro

  • Macbook Pro shuts down on startup after botched Leopard install

    After I tried to install Leopard on my Macbook Pro, the install failed and the second time I tried to install it after restarting it said that it could not be installed because it didn't see OSX 10.4.11. It won't boot up off of the OSX 10.4 install disk either saying that software can't be installed on the computer. Whenever I try to boot off the hard drive it can't find OSX 10.4, it either gives the old question mark folder error or it just literally shuts itself down. Any ideas? I would greatly appreciate anything.

    HI Guardian,
    If you haven't tried this ... boot the MBPro from the Tiger disk by holding down the C key, inserting the disk and pressing the power button all at one time. Release the C key when you see the Apple logo on the screen. By default an Installler window will open. Ignore that... now look up at the Menu and click Utilities/Startup Manager. Click Startup Manager. A window that opens will indicate the drives available to boot from, I'm praying it will say 10.4.x in there. If it does, select MacintoshHD 10.4.x and click Restart. If this works then you have a working Tiger system folder. The thing that tipped me off is the, "question mark" icon... that shows up when the computer can't locate a system folder.
    Also, whenever you install an UPGRADE from say Tiger to Leopard make sure you have enough free drive space. You can use Disk Utility in Applications/Utilities to do that. Rule of thumb... never allow a drive to fall below 15% free space.
    Carolyn

  • My MacBook Pro Shuts Down 5 Minutes After I Unplug It, Whats WRONG!?!?

    Recently, whenever my Macbook Pro is ever unplugged it shuts down in less than five minutes. It works absolutely fine when the power source is plugged into the wall. Do you think i have a faulty battery? Are there other Possibilities? I have searched around and it seems like people who have the same, but less extreme experiences-have faulty batteries...
    Thanks for the the help!
    -Jeff

    Defective battery. I know some folks with early MBPs that had this problem, and it was a bad battery in those cases. Call AppleCare. Assuming it's in warranty, they should ship you a replacement battery with a mailing label to return the bad one.

  • Mac pro shuts down 5 seconds after first time starting up

    my new mac pro won`t start up properly, I push the start button, the start up image appears on my display and 5 seconds later the computer shuts down without any visible reason or notification. It`s a Mac Pro bought in the US and I`m trying to use it in Europe...
    I`ll appreciate any advice you can give me!

    Try a SMC reset.
    DALE

  • Macbook pro shuts down during reboot after flat battery

    Hi, I have a macbook pro (early 2011) And it went flat two nights ago whilst watching a movie. It was plugged in but I've been having charger issues. Anyway, now that it's fully charged, whenever i turn it on it gets to the apple logo with a progress bar (restoring the previous session maybe?), but then shuts down. I've tried a few times and its the same everytime.I suspect that it's trying to restore the last session (the progress bar - I cant recall whether that happens normally) and running into problems because of the flat battery episode. Can a session restore be cancelled?
    I can still boot up the windows partition by pressing the option button during start up, its just the mac partition that wont boot. Also, I am still running Snow Leopard (what it came with, though with all updates).any help would be greatly appreciated.

    Anyone?

  • My MacBook Pro shuts down almost immediately after login.

    I just installed my banks security software, Rapport, and an Adobe flash update. Does anyone know why it's shutting down, and have any hints on how to solve the problem please?
    I don't even get time to see what programs might be running. Is there a way to start up in safe mode.

    nigelneedsanswers,
    yes, there’s a way to start in Safe mode.

  • A135-S2266 shuts down 4 seconds after start

    I have tried everything I know to get this machine to start. It had been dormant for about 8 months after shutting down suddenly while browsing the internet. I fully charged the battery and the front panel lights work properly. When I press the start button the fan comes on for about 4 seconds and then shuts down. No video either in the screen or an external monitor. I have tried replacing the memory and disconnecting the hard drive to no avail.I have tried startup on both battery power and external charger power.
    Any help will be appreciated.

    Many items can cause this to occur.  Shutdown is the unit way of preventing further damage.  Feasible the hard drive is in failure mode. There maybe dust build up around the fan and exhaust ports needing cleaning, check the power adapter and cables for any signs of fraying/split aspects.  You mentioned 'replaced memory' feabile you are using an incompatible module not set to work with that unit. Resetting the hard drive you must ensure that the pin connectors are aligned completely and fully pushed in.  Just some areas for you to work on to see if they resolve the problem.

  • IPad 1 pre-installed applications shutting down just seconds after loading with no apparent reason

    I've been using a second-hand iPad 1 running the highest available version of iOS for around a week now, but recently, when I wanted to use a preinstalled application they would load, but just around a second later I would be at the home screen again.
    (I'm not really in the mood to explain deeper right now, I'll reply to any questions I'm asked...)

    Is it just the pre-installed apps, or most all apps.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
    Unfortunately, since these were pre-installed apps, you can't delete the app and re-download.
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
     Cheers, Tom 

  • Nokia 5610d-1 shutting down 2 second after start

    Hi!
    How to reset NOKIA 5610d-1 to factory settings?
    I tryed to enter *#7780# but i have no time to enter all this digits. I tryed 100 or 200 times and now i can enter this code too fast to see next screen and security code request. But it's no more possible to enter the code before the phone goes down.
    The problem comes with some theme installed. Batteryes are charget completely. 
    I heared something about safe mode, but can't find any information for this model.
    Please help! 

    format nokia 5610d-1

  • On starting up, my macbook pro shuts down after 25 seconds of booting up.

    Hi there. On starting up, my macbook pro shuts down after 25 seconds of booting up. The time bar comes on for a while before it simply goes blank and switches off without any notification. Battery iappears charged. Could it be a virus? Help please!! O

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Macbook Pro Shuts Down During or Soon After Start-Up

    My macbook pro shuts down after booting up. Sometimes it makes it to the desktop, but sometimes just to the gray screen. Also, at desktop, it asks if I want to shut down. Is something pressing on the shutdown button? Any help on what to do?

    Try resetting the SMC.

  • My macbook pro shut down after I plugged in a iphone 5 kabel.

    My macbook pro shut down after I plugged in a iphone 5 kabel. What to do now?

    Take the computer, computer AC charger, iPhone and cable and all accesories for the iPhone into an Apple store to be looked at.

  • My macbook pro shuts down and doesnt let me turn it on after a few days i try to turn it on and it works but then after a few hours or so of using it it turns off again and the cycle of me waiting days to turn it back on happens again whats the prob?

    my macbook pro shuts down and doesnt let me turn it on after a few days i try to turn it on and it works but then after a few hours or so of using it it turns off again and the cycle of me waiting days to turn it back on happens again whats the prob?

    If you haven't already done so, try this simple step first.

  • My 15" Macbook Pro, shuts down by it self (Random occurrence).

    My 15" Macbook Pro, shuts down (randomly) by it self, some times it will not turn on, and some other times (very rarely) the fans go on “very loudly” the second I turn it on. But the computer, does not turn on at all, even with the battery fully charged and the fans runing full blast.
    Some other times, it will not wake up. It will only turn on or wake up if connected to the power adapter, even if the battery is fully charged.
    I have already reset (a couple times) de firmware, the smc and he pmu and the problem persists.
    Al this goes on randomly and unpredictably. Some times it works just fine for 4 or 5 days and the suddenly something happens.
    I also think that some times the computer runs extremely hot.
    PLEASE HELP!!!!!!
    [email protected]
    15' MacBook Pro   Mac OS X (10.4.8)  

    I have the same thing happening with a new macbook I bought my wife and I called apple today and after going back and forth between apple care and apple customer service they are shipping me out a new replacement macbook as it is less than 30 days since I bought it. I am waiting for their email with the Fed ex info so I can send this one back and then they will send out the new one.
    If it is still in warranty I suggest you call Apple customer service and let them know how bad it is and insist on a new one!
    This one also reboots at the slightest movement and it took me several tries to finally log in on it tonight to delete all the user accounts before I send it back!
    Hopefully the replacement one is glitch free!
    Powerbook G4 1 ghz   Mac OS X (10.4.8)  
    Powerbook G4 1 ghz   Mac OS X (10.4.8)  

Maybe you are looking for

  • How do I set column width for a table?

    I want to set the same width for all the columns in a particular table. Is there anyway of doing this without having to actually manually adjust each individual column? Thanks

  • Problem with leopard DVD loading in PowerPC G4

    Hi having problems installing Leopard DVD on Mac G4 desk top - 1GHz PowerPC G4 (3,6), 1MB L3 Cache, 768 MB Ram. A few of the details: 1) I have installed Leopard on my Laptop and it is running fine and it is a family pack edition DVD. 2) I wiped the

  • I can't change the volume of the sound over time within a clip.

    I want to adjust the level of the sound within a clip. I take my pen tool and just add 2 keyframes a few seconds apart from eachother. I adjust the height of the last keyframe, but when I playback NOTHING happends. This is so annoying because it has

  • Webcacheadmin permission issue

    hi, my config : Linux x86 RHEL 2.4.9 Oracle Application Server 10.1.2.0.2 32-bit my problem : opmnctl startproc process-type=WebCacheAdmin fails with a permission error described here after: [root@rhas02 bin]# tail /products/oracle/as1012/midportalfo

  • Hide and show regions

    Hello, I am using Hide and show regions on my page. But now I'm encountering a problem. Every time the page reloads, all regions are collapsed. Is there some way to make sure the regions that were open, are open again when the page reloads. Thanks in