Need Dynamic attributes for XI adapter to use in Dynamic Configuration ..!!

Hi Friends,
We are planning send message to different receivers through XI adapter by using Dynamic Configuration.
Can anyone please tell me what are the dynamic attributes used for XI adapter.
In my scenario, I want to pass the Service Number and Path prefix of XI adpater dynamically by using sender ID from Idoc payload.
I know how to use the dynamic configuration UDF in message mapping. But I don't know the dynamic attributes which we can pass to Service Number and Path prefix of XI adpater.
Kindly suggest ..
Thanks
Deepthi.

Hi Sourabh,
>> You need to set these attributes explicitly in the adapter configuration..
Can you please elaborate on this like how to implement this? Do we need to use any module configuration in the adapter?
We will use XI adapter only while sending the data directly from IE without using any feautures of AE (like adapters, modules etc). It is like directly sending data from ABAP stack without using J2EE stack. That is the reason we can't use any Modules in XI adpater and it is in disabled by default.
When I checked in SXMB_MONI.. as you said details are found in
- <SAP:Attribute>
<SAP:Name>host</SAP:Name>
<SAP:Value>10.190.25.16</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>httpDestination</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>path</SAP:Name>
<SAP:Value>/rcvA/receiver</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>port</SAP:Name>
<SAP:Value>8210</SAP:Value>
</SAP:Attribute>
XI adapter uses mainly three parameters Host, Port and Path.
I want to pass any two of these values dynamically to achieve my solution. Can you please suggest your solution how we can implement it.
-Deepthi.

Similar Messages

Create a dynamic attribute for each user

Hi All,
I request you all to let me know how to give an approach to the following requirement.
REQUIREMENT: I have to create a dynamic attribute in UME for each user and the read the attribute on lead selection of a table having list of Users.
 On lead selection, the dynamic attribute value should be either true or false. Based on this value the rest of the application specific operations wil be taken care.
 If a particular User does not have the dynamic attribute associated to it, then we need to create the same.
Looking forwarrd for your help.
Regards
Dipendra

//@@begin javadoc:UMSavePropertiesByNode()
 /** Declared method. */
//@@end
public boolean UMSavePropertiesByNode( )
 //@@begin UMSavePropertiesByNode()
 try {
 if (wdContext.currentUserDataElement().getVaIUserMaint().setAttribute("com.sap.security.core.usermanagement", this.getUMPropertyName(null) + ".TableColumns", this.getPropertiesByNode())) {
 wdContext.currentUserDataElement().getVaIUserMaint().save();
 wdContext.currentUserDataElement().getVaIUserMaint().commit();
 msg.reportMessage(IMessageTableUtilsComponent.UMPROPERTY__SAVE__FIELDS__SUCCESS, null, false);
 } catch (UMException ex) {
 wdContext.currentUserDataElement().getVaIUserMaint().rollback();
 msg.reportMessage(IMessageTableUtilsComponent.UMPROPERTY__SAVE__FIELDS__ERROR, null, false);
 return false;
 return true;
 //@@end
//@@begin javadoc:UMLoadFieldsProperties()
 /** Declared method. */
//@@end
public petrobras.com.br.classes.FieldsTable UMLoadFieldsProperties( petrobras.com.br.classes.FieldsTable fields )
 //@@begin UMLoadFieldsProperties()
 String properties[] = wdContext.currentUserDataElement().getVaIUserMaint().getAttribute("com.sap.security.core.usermanagement", this.getUMPropertyName(null) + ".TableColumns");
 if (Compare.getLenght(properties) > 0) {
 //msg.reportWarning("[UMLoadFieldsProperties]: properties.length = " + properties.length);
 for (int i = 0; i < properties.length; i++) {
 int attrPos = Integer.parseInt(properties.substring(properties.indexOf("(") + 1, properties.indexOf(")")));
 String attrName = (String) properties.substring(properties.indexOf(")") + 1, properties.indexOf("="));
 int attrValue = Integer.parseInt(properties.substring(properties.indexOf("=") + 1, properties.indexOf(";")));
 Field item = fields.getField(attrName);
 if (item != null) {
 item.setPosition(attrPos);
 item.setVisibility(WDVisibility.valueOf(attrValue));
 fields.removeFieldByName(attrName);
 fields.addField(item);
 return fields;
 //@@end
regards,
Angelo

Advice needed on monitor for Photoshop and Lightroom use

Hi. I am aserious amature photographer wishing to move to the next level and sell some of my work.
I just had a custom pc built to work with the new copies of Photoshop CS5 and Lightroom 3 I bought (lots or RAM and HD space, ssd, etc....)
The last piece of my system is to purchase a monitor. I want to be somewhere in the better then Best Buy but less than NEC/Eizo range in price, or between $500 - $900. I have worked with cameras since the early 80's and moved to digital several years ago but the only post processing I have done is with Photoshop Elements. I would be doing mostly prints to sell but also need to have a web site to do so. Will also use the pc for daily net surfing... but do not game or watch a lot of video on the pc.
Being really new to this whole process I have a few questions.
The first thing I need to decide is whether I need to look for a wide gamut display or not.
I realize the whole chain must be 10 bit (Adobe -OS - graphics driver - graphics card - display port.
I have Adobe Photoshop CS5 and Lightroom 3, Win7 64 bit, Zotac ZT 50701 10M video card (which uses GeForce GTX 560 fermi and an nvidia chipset. It does have displayport). I am having a hard time determining whether my video card actually supports wide gamut (10bit).
Standard vs Wide Gamut? Is wide gamut important enough to deal with the issues it brings (calibration, viewing things other than PS and LR or color managed, which appear to be rare?) Is sRGB good enough for most prints (don't do fine art, mostly nature and portraits but starting to do some HRD things). If wide gamut is the way to go I have no problem with that and have the time to learn about calibration, color management, etc... But I also want to make sure the juice is worth the squeeze.
24" vs 27"? Is there any advantage to one or the other when editing photos?
IPS vs PLS? I realize they are similar but are there differences worth noting?
Glossy vs Matte Anti-Glare? seems to be a lot of comments regarding the anti-glare coating, mostly poor. Yet I can see issues using a glossy screen in my study with a window to my back.
One manufacturer vs another? I realize Eizo, NEC and LaCie are at the top of the heap. But with my budget, after upgrading my pc and camera equipment, I can't make that work now. So I need to choose from the next group down (Dell, HP, Samsung, Asus...)
One or two monitors? It looks like many (mid-grade) wide gamut monitors do a lousy job of displaying anything but color managed sites. Is that necessarily true of all the mid-grades? Or can some be used for graphics but as well for routine net surfing, MS Office, etc...? Or am I better off getting two monitors, one for graphics and one for the rest? That would pretty much limit me to 24" or less given my budget (used to using a Dell 21" TN monitor that oddly crapped out just as my new pc was done).
The more I read reviews the more confusing it gets. There seems to be a difference of opinion even among pros on whether to go wide gamut or stick with an easier sRGB. Realizing a standard gamut monitor would be cheaper, I do want to make the right decision up front, given my budget.
The one thing I have found astounding is that there is nowhere to actually see many of the monitors I am considering. We live in Nashville TN but my wife is from Atlanta Ga so we drove there a few weeks ago to visit family and for me to visit monitor shops. Even the largest ones there (Fry's and Microcenter) had minimal IPS monitors, a few Dells and HP's. The knowledge of their sales folks was so poor I finally gave up. Felt bad about this until I posted this on another board and got a reply from a guy in LA (second largest city in the US) that he wanted to see a particular monitor and there was no place even there to do so.
Anyhow, here is what I have considered:
24" Wide Gamut: Dell U2410 and Asus PA246Q. Dells appear to be good IF you get a good one. The Asus appears to be a clone of the Dell that gets a lot of good press.
27" Wide Gamut: Dell U2711 that also gets a ton of good reviews
24: Standard Gamut: Dell U2412 and HP ZR2440.
27" Standard Gamut: Samsung S27A850D and Apple Cinema- The Samsung uses PLS technology versus IPS while the Apple is a glossy screen that will work with a pc.
Sorry for the long post. Any comments are greatly appreciated.

dkg62 wrote:
I realize the whole chain must be 10 bit
Not trying to talk you out of setting up a 10 bit pipeline, but it's still not very mature, and it really isn't a necessity to get a good editing experience.
Personally I find advantage in using two 4:3 ratio monitors for Photoshop work. All my panels are on the right monitor, while pretty much the entire left one shows the Photoshop main window and the working canvas space. My desktop is 3200 x 1200 pixels overall, and I find having the panels remain visible all the time is important.
Regarding whether a wide gamut is important... Will you be printing to devices that deliver a wide gamut? What other things will you be doing with your system?
It's not a no-brainer whether a wider gamut monitor is always "better" for everything, since it can accentuate the differences between the output from color-managed and non-color-managed applications, and it's definitely true that not everything is color-managed. With a monitor that's close to sRGB, for example, you might find Internet Explorer output acceptable, while using a wide gamut monitor will result in garishly oversaturated IE displays. On the other hand, FireFox (with a settings tweak) seems to get color management right, so there is an alternative.
I think, as John has implied above, you should work to get your head completely around how color-management works, soup to nuts. If you don't, there will always be things that are a mystery or which surprise you at the wrong times. Being able to order a print and have it come back with the expected color can be very important, as you might imagine.
-Noel

Adapter specific message attributes for SOAP adapter

Hi all,
I have gone through the SAP Help Documents for configuring SOAP Communication Channel. I am unable to understand how to implement ASMA for Soap adapter.
Please provide some links to help me understand the same
Many Thanks,
Neha

Hi Neha,
pls do chk the below links for SOAP adapter message attributes
http://help.sap.com/saphelp_nwpi71/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst38.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/webservices/webservices16.htm
Regards
Sampath

Dynamic values for column header / "AS" using XMLFOREST

Hello,
I was wondering if it was possible to show data from a select statement into an AS column, e.g. SELECT col.a AS col.b.
The reason I need this is for XMLFOREST, as I need the value of a SELECT statement to be the column name, so that it will be the value of the element. e.g. <col.b></col.b>
Anyone know if/how I can do this?

SQL> ed
Wrote file afiedt.buf
1 WITH t AS (SELECT 'fred' name FROM DUAL UNION SELECT 'bob' FROM DUAL)
2* SELECT XMLELEMENT(EVALNAME name, name) FROM t
SQL> /
ERROR:
ORA-19039: Keyword EVALNAME reserved for future use
no rows selected
SQL> ed
Wrote file afiedt.buf**** Throws a bit of magic dust into SQL...... ****
SQL> WITH t AS (SELECT 'fred' name FROM DUAL UNION SELECT 'bob' FROM DUAL)
2 SELECT XMLELEMENT(EVALNAME name, name) FROM t
3 /
XMLELEMENT(EVALNAMENAME,NAME)
<bob>bob</bob>
<fred>fred</fred>
SQL>This is an example of what you'll be able to do with 10.2.0.2 when it's released

Retrieve all attributes for a specific objectClass using ldapsearch

Hi everybody,
Question : is it possible to retrieve all attributes for a specific objectClass (by example person) using ldapsearch tool ?
I tried something like that, but it doesn't work :
ldapsearch -v -h XXX -p XXX -b "cn=schema" -s base "objectclass=person" attributetypes
Thanks a lot,
Franck

Ok, Thanks for you help,
But my question is : For a specific objectClass, by example, I would like to have all attributes for the objectClass called "inetOrgPerson"
something like that :
ldapsearch -D "cn=Directory Manager" -w pwd -h host ...objectClass="inetOrgPerson"
and the response could be :
audio || businessCategory || departmentNumber || displayName || givenName || initials || jpegPhoto || labeledUri || manager || mobile || pager || photo || preferredLanguage || mail || o || roomNumber || secretary || userPKCS12
I dont't know how to do ????
Thanks
Franck

What is the max file limit for FTP adapter that uses FileIoInteractionSpec

Hi,
I know that Oracle provided some new features in 10.1.3.4 using which we can use the file and ftp adapter to move files in a more efficient way
http://download.oracle.com/docs/cd/E12524_01/relnotes.1013/e12523/adapters.htm#CHDGFAAB
Essentially it involves modifying the WSDL to use the new InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
Now my question is, what is the file size limit which can be transferred using this.
I have tried with 20 mb file, it works. But I want to know the upper limit.
Thanks,
Amit

Tried with 31 mb file.
It successfully delivers the file but....
The instance never completes successfully in the BPEL Console. If I open the audit tab, it shows the following message
There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "7,200,001". The reason is The execution of this instance "7200001" for process "TestFTPLimit" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.less
ORABPEL-02182
JTA transaction is not present or the transaction is not in active state.
The current JTA transaction is not present or it is not in active state when processing activity or instance "7,200,001". The reason is The execution of this instance "7200001" for process "TestFTPLimit" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
Please consult your administrator regarding this error.
at com.collaxa.cube.engine.CubeEngine.store(CubeEngine.java:5514)
So does anybody know how to get over this.
I understand that sync read is a sync operation, so obviously it was going to timeout, as this transfer took around 4 minutes for me. But then, isnt this a bug from Oracle's side

Needed: Power Cord For AC Adapter 90W

In Brooklyn, NY, where can I get a USA standard power cord for a 90W 20V AC Adapter for a Lenovo T400 ?
The connection on the adapter brick looks like two overlapping circles. I believe it may be what is commonly called the figure 8 connection.
Solved!
Go to Solution.

Radio Shack carries these cords.
2-prong: Enercell™ 6-Ft. AC Power Cord (Black) Model: 61-210 | Catalog #: 61-210
3-prong: Enercell™ 6-Ft. 3-Wire Detachable AC Power Cord (Black) Model: 61-205 | Catalog #: 61-205
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Need Port number for active Host name using java code

Hi All,
I have tnsnames string and I know one of the following Host is working say Primary-host .
DESCRIPTION =(ADDRESS_LIST= (ADDRESS = (PROTOCOL = TCP)(HOST = Primary-host)(PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = Secondary-host)(PORT = 1522)))(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = ORA112DB)))
Could you please help me to get Port number of only primary Side ?. This needs to do because we cannot get port number using any oracle query.
Thanks in advance
JPrashant

You may get client's host IP with
select sys_context('USERENV','IP_ADDRESS') from dual;
You may get client's port with
SELECT port FROM v$session where username = user;
To get connection port you should issue OS command (*nix) like
netstat -n | grep <client_ip>:<client_port>
tcp 0 0 192.168.1.1:1521 132.168.1.2:65432 ESTABLISHED
To run OS command (keeping in mind all possible security consequences) it is possible to write C, java code.
Example -- http://www.oracle.com/technetwork/database/enterprise-edition/calling-shell-commands-from-plsql-1-1-129519.pdf

Recommendations for wireless adapter to use with Tivo?

I'm shopping for my first Tivo box, and was wondering if any of the Tivo-recommended wireless USB adapters work better with Airport/Mac than the others?
Thanks!
Erin

I'm glad to see this topic addressed here. I have a TiVo (Humax w/DVD Burner) and I have home network using Airport for our 3 Macintosh computers. I have been avoiding trying to hook up my TiVo to the network...and thought I'd do some research before I take the plunge. Based on what I'm reading, I should purchase a D Link DWL 120B?? We also have ReplayTV as well, has anyone tried doing networking with RPTV and Airport?

Suggestions for USB Adapter to use with AE..??

So far I have found AE to work extremely well. However, I am in search of a USB adapter to connect a PC wirelessly with AE while taking advantage of the 802.11n technology. Any suggestions for a USB adapter to buy..??

I got a dlink DWA-140 that works well. I originally bought it for my mac, but it did not work (website claimed it did) so I put it on my server.

Need how to for deleting a snippet using a Mac

I tried to follow the steps posted on 12/12/2007 by ThinkInk
but need more detail.
Thank you very much!

hi
delete the settlement rule and you can try.

CRM Loyalty Management - Dynamic attributes

Hi,
I am new to loyalty management. I wanted to know what is dynamic attributes which is linked to loyalty programs in loyalty management?
I know its theoritical meaning but if any one could explain with an practical example then it would be really helpful.
Thanks
Saurabh

Hi Saurabh,
Example
You use dynamic attributes to do the following:
Recognize and reward your most frequent customers.You assign a dynamic attribute “Number of purchases” to a reward rule. You set up the reward rule so that the system updates the dynamic attribute in memberships. You define that members can move to the next tier in the tier group after 20 qualifying purchases. When a member in the “reward” tier group makes a qualifying purchase, the system updates the dynamic attribute in their membership. With the tier change reward rule, the system checks if the dynamic attribute reaches the value 20, and if so, moves the member to the next tier.
Find out which of your usually frequent customers have not made a recent purchase.You assign the dynamic attribute “Date of last purchase” to another reward rule. You set up the reward rule so that the system updates the dynamic attribute in memberships. You use the dynamic attribute as a condition, to find out when a member in the “gold” tier of the “reward” tier group has not made a purchase for over one month.
You can find more information on the below link.
http://help.sap.com/saphelp_crm700_ehp03/helpdata/en/70/ea16956c54485083b7703ff498ef60/content.htm?frameset=/en/d9/407fbbba274c8c9df0248f56cc73e9/frameset.htm&current_toc=/en/80/775a4b17664be7ba4a6df3b5966128/plain.htm&node_id=30
Regards
Pramod

How to use Wallets for FTP Adapter

Hi,
Can someone point to a document that shows how we can make use of wallets for FTP Adapter.
Thanks

Hi,
When you configure the Connection Factory for FTP Adapter in Admin Console, provide the following values for the attributes like the hostname, username, password, port and the path of remote location as where
you want to write the file in remote Server i.e., ftpAbsolutePathBegin. Please fill this
attribute with the path like /soa/ftp/file (example path). If you are writing to a remote FTP server you need to create a Connection factory for that as above.
Please try this and let me know...
Thanks,
N

ASA 5505 -Can I use outside dynamic IP for webserver DMZ?

SETUP
ASA 5505
ASA Version 9.1(2)
ASDM Version 7.1(3)
I have basic license, using only three vlans (outside, inside, DMZ).
QUESTION:
I want to find a way (if possible) to use the single DYNAMIC IP (dhcp'd from ISP) on the "outside" interface, as a means to setup a web-server on the DMZ? I just want to allow my WHS-2011 (server) to talk to microsoft's free DDNS service where my domain name is hosted (ports 80,443,4125).
So far, every setup option I have tried does not make it past the implicit deny acl's (on the outside interface) to the web-server (DMZ).
I understand that the VLAN1 (inside) had to be disabled. I understand that objects now replace some of the older NAT'd components.
CONFIG:
object network webserver-external-ip
host <X.X.X.X>
! I had set this to match my ISP DHCP address
object network webserver
host 172.16.0.2
nat (DMZ,outside) static webserver-external-ip service tcp www www
nat (DMZ,outside) static webserver-external-ip service tcp 443 443
nat (DMZ,outside) static webserver-external-ip service tcp 4125 4125
access-list outside_acl extended permit tcp any object webserver eq www
access-list outside_acl_https extended permit tcp any object webserver eq 443
access-list outside_acl_rww extended permit tcp any object webserver eq 4125
access-group outside_acl in interface outside
access-group outside_acl_https in interface outside
access-group outside_acl_rww in interface outside
! added the dns statements below because the cisco doc (below) says it's required or dmz traffic can't get out despite default rule allowing it to do so.
! (ctrl-F) ... "all traffic would be blocked from the dmz to hosts on the internet"
! http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080bf150c.shtml
object network dns-server
host 8.8.8.8
exit
access-list dmz_acl extended permit udp any object dns-server eq domain
access-list dmz_acl extended permit ip any any
access-group dmz_acl in interface DMZ
SUMMARY:
I just want to allow my WHS-2011 (server) to talk to microsoft's free DDNS service where my domain name is hosted (ports 80,443,4125).
I want to find a way (if possible) to use the single DYNAMIC IP (dhcp'd from ISP) on the "outside" interface, as a means to setup a web-server on the DMZ?
Other:
As an interim alternative, I have been able to setup & connect to the ASA using clientless vpn (web-ssl), and from there getting over to my WHS2011 server...-but the problem is, I have no way of knowing, or updating my DDNS once that IP changes since the ASA keeps blocking the return traffic to theh outside interface. My only assumption is that becasue I am using a single dynamic IP (outside interface) that it has nothing to re-direct the traffic to....???
Thank You for any help you can provide!!
k/r

Hi,
I cant really help with the DDNS portion but I would imagine you already have that sorted out.
The ASA configurations however seem a bit off to me.
Here is what you should configure
STATIC PAT TO HOST SERVICES
There are some changes that need to be done to both ACL and NAT configurations. First of the NAT configurations for each port require their own "object network" to be configured.
Also since you are using a DHCP address from the ISP to act as the NAT address then you can use the keyword/parameter "interface" in the actual "nat" command. This basically tells the ASA that it should use whatever IP address is currently on the "outside" interface of the ASA. So you wont have to configure any separate "object network" for the public IP address every time it changes.
Also, with regards to the ACL configurations. You should only configure one ACL per interface in the "in" direction. So all the rules you need to configure for traffic inbound from the Internet need to be in the same ACL that you then attach to the "outside" interface with the command "access-group"
object network WEBSERVER-TCP80
host 172.16.0.2
nat (DMZ,outside) static interface service tcp www www
object network WEBSERVER-TCP443
host 172.16.0.2
nat (DMZ,outside) static interface service tcp 443 443
object network WEBSERVER-TCP4125
host 172.16.0.2
nat (DMZ,outside) static interface service tcp 4125 4125
access-list outside_acl extended permit tcp any object WEBSERVER-TCP80 eq www
access-list outside_acl extended permit tcp any object WEBSERVER-TCP443 eq https
access-list outside_acl extended permit tcp any object WEBSERVER-TCP4125 eq 4125
access-group outside_acl in interface outside
DYNAMIC PAT FOR LANs and DMZs
The above NAT configurations only handles the NAT for situations where the remote hosts on the Internet contact your DMZ server.
If you want to configure Dynamic PAT for all your LAN and DMZ users which basically enable them to use the "outside" interface public IP address for Internet traffic, then you could configure this single "nat" configuration
nat (any,outside) after-auto source dynamic any interface
This would enable Dynamic PAT for all users behind the ASA
I am not sure if you will run into problems since you are using a single public IP address and trying to forward TCP/443. This port is both used for SSL VPN and ASDM management of the ASA.
If you want to change the default port of the ASDM management you can use this command
http server enable
If you want to change the default port of SSL VPN you can use these commands
webvpn
port
Naturally before doing either of the above changes, make sure that you are not relying to them for management purposes if something was to go wrong. If you have SSH management access to the ASA then it should naturally be ok.
I am not sure if all of the above are enough to get your setup working but it should be the basics. Naturally if there is still problems after the above suggestions it might be helpfull to see the current ASA configurations. For example NAT might not work if the ordering of NAT rules is wrong even though the actual configurations are otherwise valid.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni

Need Dynamic attributes for XI adapter to use in Dynamic Configuration ..!!

Similar Messages

Maybe you are looking for