Need Solutions for these Errors

Hello Group !
 How are you people there.Iam very much thank full to you people for your constant support.
I need solution to these errors:
 1.SID missing.
 2.Idocs Missing or No Idocs arrived from source
 System.
 3.Errors in the source system
 4.Missing messages at transfer rules or
 Update rules.
 5.Data sent but not received.
 6.Errors in the source system.
 Have a nice week end
 Vijay

Hi,
1. Missing SIDS : Mostly occurs due to missing master data or if error records are parked and not loaded susequently, or if Master data is not loaded before loading Transaction data. You need to fix these situations.
2. Missing Idocs -Canbe due to idocs getting stuck, rfc connection failures, bad idocs, partner profies missing or deactivated. need to correct these errors on the source side.
3.Source system errors - Jobs on source system failed or are slow.idoc errors. Source system crashing. Problems in generic extractions. Problems with update jobs. Data not getting posted to Delta queues. Data not coming through correctly after DS enhancement. Data posting errors to infostructures are some of the errors you'll face on the source system side.
4. Missing messages again can be due to jobs being slow, processes being killed, or warning messages. Need to treat the warning messages or reset the job.
5. Can be due to IDOC errors. Goto SM58 and push data packets from there on the source system side or due to IDOC errors.
6. Same as 3.
Cheers,
Kedar

Similar Messages

Need solution for unicode error

Hi ,
I am facing unicode error "ESCAPE_TRICK cannot be converted to a character-type field" for
the following syntax -
ESCAPE_TRICK-X1           = '1C'.
Where ESCAPE_TRICK is defined as -
DATA: BEGIN OF ESCAPE_TRICK,
X1(1) TYPE X,
END OF ESCAPE_TRICK.
Please suggest me the solution.
Thanks,
Narayan

Hi,
As type X is obsolete.
you need to convert it to type c. But you should convert the hexadecimal value '1C' to its equivalent Char value. Replace your code with:
DATA: BEGIN OF ESCAPE_TRICK,
X1 TYPE STRING,
END OF ESCAPE_TRICK.
To convert Hex '1C' to type string
CALL FUNCTION 'CACS_CONVERT_HEX_TO_STRING'
EXPORTING
    XSTRING       = '1C'
IMPORTING
   CSTRING       = ESCAPE_TRICK-X1.
It should solve your purpose.
Alternatively, '1C' is "FILE SEPERATOR'. you can find its value in char and can use it.
howver, the first ,method should work..
revert back in case of further issue.
Thanks and Regards
Rishika
Edited by: Rishika Bawa on May 14, 2009 2:06 PM

Urgently need solution for Pricing Error: Mandatory condition type missing

Hello, All
I am working on CRM 5.0 service module and I am facing a problem while creating a service order.
When I enter the product in the service order it gives me an error
"pricing error: mandatory condition type Z### is missing" even though I maintained the customer pricing procedure, the pricing procedure determination, and the condition record. The error shows that the pricing procedure is determined as the error shows the mandatory condition is determined but what I think is that it cant find the condition record.
I already maintained the condition table and the condition record in the product master data but it does not pick the price, kindly help. Deserving points will be rewarded.
Regards
Jacopo François

Hi,
Open u r transaction which u r getting the error, Double click on product u ll get the item level info, Select condition there u click on create icon, there u can define the condition.
OR
While creating a sold to party check whether u r entered a sales area data properly or not.
Hope it helps u
Gentila

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Solution for iTunes error 0x80092013

Hello everybody!
You receive this error when you try to log in to your account iTunes or try to get access to iTunes Store.
I found a solution for this error.
Try these instructions, and if it helps, please write about it here. Thank you!
1. Disable updating Windows.
2. Open a command line as administrator.
3. Enter this command: "wusa.exe /uninstall /kb:2872339"
4. Restart your computer.
5. Open a command line as administrator again.
6. Enter this command: "wusa.exe /uninstall /kb:2882822"
7. Restart your computer.
And try to log in to your iTunes.
I hope it will help you!

Hi, chau.satish.
Thank you for visiting Apple Support Communities.
I understand that you are receiving error 11556 when attempting to connect to the iTunes Store. Here are the steps for this specific error that I would suggest going through.
"Error 11556"
This alert occurs when iTunes is trying to do something not allowed by the iTunes Store in that country.
The most common example of this is trying to sign in while limited to iTunes U by Parental Controls.
For more information, see the steps from iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store.
iTunes: Advanced iTunes Store troubleshooting
If the above steps do not resolve the issue, make sure that the iTunes Store is not disabled in Parental controls.
Use Parental Controls in iTunes to set content restrictions
-Jason H.

Need clarification for these names, R/3, WAS, NetWeaver

Hi All
I posted the question on WAS preview installation, then I realized I should have put it here. Here is the link to that post:
Need clarification for these names, R/3, WAS, NetWeaver
Thanks again for any input
Xueqing
Added the link to the first post
Message was edited by: xueqing Han

Hi Xueqing,
First of all, sorry for any confusion that we have caused you. I hope I can give you an answer that will clear up the confusion. Sorry, but it is a long explanation of the development of two application solution but history tends to be very long winded!
It is not true SAP R/3 Enterprise equals SAP Web AS, and I'll hopefully explain why:
In the beginning (at least in the client server world) SAP only ship SAP R/3. The technology layer under SAP R/3 was called SAP Basis. There was only SAP Basis under SAP R/3.
SAP then started to deliver other software solutions that were not included in or built on the SAP R/3 software. These included SAP Business Information Warehouse, SAP APO, SAP SEM, SAP CRM, and the list goes on.
These solutions needed to run on technology layer (like SAP R/3 did). SAP Basis was the obvious choice for this because of the common technology layer providing DB/OS abstraction and a coding environment.
~2001:
Later there came the need to have SAP Basis support the web and its web standards and other programming languages. This radically changed what SAP Basis was and we decided to rename the new technology layer to SAP Web Application Server (SAP Web AS). So the SAP Basis name was retired and SAP Basis 4.6D was the last release called SAP Basis.
The new release and the "technology change" means that all the applications mentioned above now ran on SAP Web AS. The first release of SAP Web AS was 6.10.
~2002:
SAP Web AS was first used in SAP R/3 Enterprise release .
The important fact is that SAP R/3 Enterprise runs on SAP Web AS. SAP R/3 Enterprise = SAP R/3 business applications + new business functions + SAP Web AS.
~2003:
I hope the above explanation is clear, because technology takes another major change. It was realized that SAP now had a collection of business solutions/applications (SAP R/3, mySAP CRM, mySAP SCM, etc) and a collection of technology solutions (SAP Web AS, SAP BW, SAP EP, etc). The technology requirements for the business solutions did not end at SAP Web AS, they needed portal, data warehouse, knowledge management capabilities, etc to develop business solutions on.
To address this SAP made the decision to combine all the technology solutions and tools into one single platform. This made complete sense for developers (SAP, Partners and customers). This single platform is called SAP NetWeaver. It includes all the old individual components of SAP Web AS, SAP BW, SAP KM, SAP EP, etc).
~2004:
I think you can guess what the next step is. Yes, the new release of SAP R/3. Since the release of SAP R/3 Enterprise and the release of SAP NetWeaver, SAP R/3's name changes. It is now called mySAP ERP as it includes a lot of applications that were previously sold separately (like SAP SEM, MSS, ESS, etc).
So now mySAP ERP runs on SAP NetWeaver (yes everything that was in SAP Basis and then in SAP Web AS is still there but SAP NetWeaver has so much more now).
Also with the release of SAP NetWeaver, SAP starts to stop using the old technology component names - you will not hear us talk about SAP Web AS, SAP BW, etc anymore, just SAP NetWeaver releases.
In addition all the other SAP business applications also run on SAP NetWeaver, so the latest version of mySAP CRM, mySAP SRM, and mySAP SCM all run on SAP NetWeaver.
So to simplify the explanation, it would be :
Evolution of SAP R/3:
SAP R/3 (up to release 4.6c) -> SAP R/3 Enterprise (releases 1.00 through 2.00 -> mySAP ERP (2004 onward)
Evolution of Basis:
SAP Basis (up to release 4.6d) -> SAP Web AS (up to release 6.40 which was included in SAP NetWeaver '04) -> SAP NetWeaver (2004 onward)
SAP NetWeaver and mySAP ERP have their own release cycles. mySAP ERP always has an underlying technology release that it is built on (this is a SAP NetWeaver release)
I hope this helps,
Mike.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport and TM, running Lion.

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport Utility and TM, running Lion.

See #C17 in Time Machine - Troubleshooting.

My solution for the "Error -50" and/or "Syncing" problem

Hi
After upgrading to iPhoto 5.0.2 I also had the "Error: -50" problem"
How have I solved this problem => also with the help and tips from other forums.
Before the upgrade all my pictures from iPhoto were available on my iPod Photo (30 GB)
After the upgrade of iPhoto to 5.0.2 I received the "Error: -50" every time I tried to synchronize my iPod. Strange, strange, strange, ...
=> first I detected that putting pictures on my iPod starting from a folder (in stead of iPhoto) worked fine.
Trying to change back to iPhoto did not work and no albums where available in the iPod Options view!
=> then I tried to create a new iPhoto library (press and hold Option(alt)-key while starting iPhoto), put some pictures and albums in it ... and even this did not work.
What did I do to solve this problem!
1. I thrashed my iPhoto application (DO NOT empty you trash, because you have to put it back again)
2. I used "Disk Utility" to repair the disk permissions.
3. I put back my iPhoto application from the thrash (same location as before - Applications folder)
4. and did again a "repair disk permissions"
5. then I tried to sync my NEW iPhoto library on my iPod and EUREKA this worked.
6. Then I switched back to my original iPhoto library (launch iPhoto holding the Option key).
7. Tried to sync ... again the same problem => no pictures and albums available in the iPod - Optoins - Photo tab.
=> conclusion : the problem has to be in my iPhoto library
8. after trying many things (such as eliminating albums => trail and error method) I found the cause for my problem.
=> I used KEYWORDS in my iPhoto library with strange characters and had SMART albums using it. In my situation it was the "&" character.
Replacing or removing this character solved my problem. All my pictures and albums were available in the iPod - Options - Photo tab
9. Sync could be started ... Youpi!
After synchronizing my iPhoto library I noticed that not all pictures were available on the iPod. I start looking which pictures that were missing on my iPod. When I found them I wanted to know why they were not synchronized.
I found the explanation in the file "AlbumData.xml" in the "iPhoto Library" folder.
If you open this file with TextEdit and search for this missing file then you'll find that (at least in my case) corresponding path does not exist (any more). And that was the case for each missing file!
How solving this problem?
1. I tried rebuilding the iPhoto Library => launch iPhoto holding the Option and Command keys. This did not work.
2. What did I do?
2.1. First I exported all my Pictures from the active iPhoto Library (Share - Export)
=> VERY IMPORTANT NOTE : all extra info such as "Key words", Albums, ... will NOT be saved!
2.2. I created a new iPhoto Library (launch iPhoto holding the Option key)
2.3. Then I imported all exported pictures.
=> if you check the file paths in the AlbumData.xml file, you'll see that this info is correct!
2.4. At least I recreated (manually) all "Key words", Albums, ... so I had a duplicate of my original Library.
I hope this also works for other people with the same problem.
Greetings
P@nt@ni

Here my solution for the itunes' "unknown error -50" and not showing any albums in the prefs' tab:
1. All rebuilding options in iphoto didn't resolve the problem.
2. I opened the file "AlbumData.xml" in the iPhoto-Library-Folder with a text editor. I figured out, that the problem wasn't in the Albums, but in the "Master Image List"-Section. They look like this:
<key>1741</key>
<dict>
.. titles, filenames, ....
</dict>
After making a backup of this file, I started deleting entries here (you know, the fastest way to do it is to split it always in halves and check in iTunes if the error still exists). After about half an hour I got the problem key.
3. The problem was: Some (curious) white spaces at the BEGINNING of the comment! Curious, because they weren't visible in iPhoto's comment, but I could delete them in Iphoto! I guess they weren't normal space characters, but any special symbols (line feeds? whatever)
4. After that, the -50 error was gone. Now I could see the Album Names. But the sync stopped after a while with a "... file not found...." - error.
5. Again, with trial&error I found out, that 4 pictures in the last 3 months' rolls made this second problem: I just duplicated them in iPhoto and deleted the original ones. So I still don't know why they have produced this error... anyway,
6. Now all of my photos sync well.
.. well, the whole story took me 2 evenings. I really didn't switched to Mac to play debugger for Apple. Do they read these groups here or do I better write them anywhere? They should get those problems fixed asap! As far as I read in the groups, those errors do exist quite a long time?!
My versions:
iPhoto 5.0.4 (263)
iTunes 5.0.1 (4)
OS X 10.3.9
iPod Nano 1.0

Solution for OPML error in SOA suite Startup (Win Vista x64 and older)

h1. Hi Folks!
When installing SOA suite on Vista 64 bit I encountered lots of problems. One of them was the following upon starting the SOA suite:
At 33% in the progress bar, the starter gives an error, returning a question about OPMN.
Caused by: oracle.ias.opmn.optic.OpticBadConnectException: Error connecting to OPMN (is it running?): Connection refused: connect
Being a newbie in this field, I resisted to learn everything (Oracle as part of a course of Busines Process Integration Laboratories at the University) about the works behind the package. Unfortunately, OPMN drove me crazy for days!
The main problem for OPMN is the unability for the system to handle certain issues.
One of the issues: When in a testing environment that is unstable (i.e. a laptop) some issues occur:
* sleep resume is not supported
* hibernation resume is not supported
* restart is not always working for all processes
(tested this with XP32 & XP64 SP2; SP 3; Vista 32 and Vista 64)
The main issue is with OPMN and the services that are started and controlled through it.
A solution for our workgroup has been made:
-create a reset.bat file
-use the following code:
+@echo off+
ECHO Step 1 in the server reset is running: Shutdown OPMN processes
D:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl shutdown
ECHO Please continue the reset sequence by pressing any key
pause
ECHO Step 2 in the server reset is running: Restarting OPMN processes
D:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl startall
END
The commands regarding ECHO and the pause break can be omitted, but for supervision it is better to see if all processes are started in working order.
Please note the absolute paths, these are from my personal setup as they are the default from the manual. Adjust if necessary.
As User Account Control (UAC) does interfere a lot with programs in Vista (32 & 64) and from SP3 also with XP, please assign administrator rights to the reset.bat file.
This solution should take care of the "OPMN (is it running?)" issue, without rebooting or cold restarting the server.
Edited by: user10221595 on Oct 6, 2008 9:18 AM

-- self found answer

I need solution for this query

hi all,
could anyone please send me solution for this query these are the database tables am having
TABLE NAME :USERS
ATTRIBUTES
UNAME
PASSWORD
GROUPNAME
TABLE NAME:GROUPS
ATTRIBUTES
GROUPID
GROUPNAME
my requirement is that i need 2 acces the groupname of a particular user and the reamining groups to which i doesn't belong in A SINGLE QUERY
my result needs to be like this
Authorised group
consultant
UNAuthorised groups
sales
vender
recruiter
admin
if any body got the solution please send

hi All,
I have 3 tables 1)PREVILEGES (groupname, previleges(values y or n only))
2)GROUPS (groupid, groupname)
3) USERS (uname, groupname).
Here each user belongs to one group, each user hav a default previlege means example if user is consutant then he can access only consultant group. Means default previlege will be used. For default previleges, there is no record in Previleges table.
The Problem is that, I need to reterive the groupname from users which de doesn't belong as well as his previleges from previleges, If there is no values in previleges in the table it should return n. or value what is therey.
the different groups are
SALES,CONSULTANT,VENDER,RECRUTER,ADMIN

Need report for these fields

HI,
need to write a report for these fields.
PO number (EKPO_EBELN), Article number (EKPO_MATNR), Vendor part number (EKPO_MFRPN), Description (MAKT_MAKTX), Quantity in Base unit of Measure (EKPO_MENGE) and Quantity in BuyPack unit of measure and Net price (EKPO_BPRME).
Give me it ASAP.
Regards,
Chow.

Naidu,
DATA : Begin of I_EKPO occurs 0,
              MATNR LIKE EKPO_MATNR,
               MFRPN LIKE EKPO_MFRPN,
               MENGE LIKE EKPO_MENGE ,
              BPRME LIKE EKPO_BPRME ,
              MAKTX LIKE MAKT_MAKTX,
            End of I_EKPO.
select EKPO~EBELN
EKPO~MATNR
EKPO~MFRPN
EKPO~MENGE
EKPO~BPRME
MAKT~MAKTX
from ( ekpo inner join makt on
ekpomatnr = MAKTmatnr )
into table I_ekpo
where ebeln in s_ebeln.
Don't forget to reward if useful..

Need solutions for Budget, Landed cost and difference in 2005b and 2007B

Hi all,
Need help for the following scenarios
1. How to define budget for Purchase order and cost centers
2. Landed Cost in SAP B1 2007 how do we do? I am getting an error message stating that Landed cost allocation account is not defined....
3. Difference in 2005B and 2007B
Regards
Shashi

Thankyou Jasper,
Landed cost problem has been solved.
Regarding Budget set up My client need Budget at costcenter level. i.e Cost center wise they want the budget. As of my knowledge to do this we need to activate Account segmentation right?
Without doing that is there any other way where we can set Budget cost center level also?
one more thing, there is a check box of purchase order, Goods Receipt and Accounting at the time of setting up Budget in General setting? what it is for?
Regariding difference in 2005b and 2007B I was not able to get documentation on this.
Regards
Shashi

Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows

When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+

Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed).

Need Solutions for these Errors

Similar Messages

Maybe you are looking for