Negative amount in IR8A File

Hi,
Why do I get negative amount in IR8A file specifically in benefits in kind balances(MOA 275 & MOA 351)? How do I fix them?
Thanks,
Jerico

Thanks harish for ur inputs.
OMPP
SMPN
SMPR
OMPP,SMPN,SMPR wagetypes are knowcking off (sum of smpn+smpr is entered as -ve OMPP) or ofsetted for past periods like jan,feb months ..for march it is not the case and in april  month there is XXXX wagetype as SMP Payment Adjust (NEW) which has -ve value.can it be used as norm?
have ur come across similar issue in the past ?pl let me know if there is a work around...
thanks for ur help.
no worries,karthik

Similar Messages

  • Negative amount in sales order

    Dear experts,
    We are in support project,
    ours is order related billing,
    we get a error message in a sales order, when we enter a base value is "zero", and add a discount in the same sales order with absolute amount which is a negative value,
    this displays a error message as "negative amount is not allowed", then sales order is terminates, we do not able to save the sales order,
    however the user forwards me a successful case, the  sales order created with negative value and subsequent invoice for that sales order,
    when i check it from my side,the same error flows, when i tend to go item level,when i view document floe the sales order and invoice is created.
    Please guide me to control this error message.
    Regards
    baalakrushnan.da

    Hi,
    In the condition type for price,there is a field for pricing procedure check which pricing procedure is assigned there.In the standard condition PR00 there will be PR0000,check in ur pricing condition,i think the terminating of the sales order and negative value may be bacause of that,or if due to the validity date of the pricing condition.
    Regards,
    Ramesh.

  • Dealing with negative amounts in payment proposal runs in f110

    Hi Techies,
    In the payment proposal run through f110 transaction is it possible to raise an exception and show the negative amounts seperately?

    Dear Ashok,
    The scenario is that during the payment proposal run,
    if there are two amounts with different due dates, say
    10.07.2008     8900 euros to pay
    20.07.2008     -800 euros ( the total of the documents at this due date is minus than zero)
    Now the program gives one record which says 8100 euros to pay.
    But our requirement is that, insted of displaying a single record that adds up the amounts, the negative amount is to be shown seperately like this:
    Due date      10.07.2008     8900        euros to pay
    Due date     20.07.2008      -800     Exceptions
    As this is a standard SAP functiionality, i would like to know any possible ways to achieve this requirement.
    Regards,
    Madhuri

  • How do I Credit Note negative amount line item in Invoice

    Hi Experts,
    I have an AP Invoices that have a negative line item total.
    Now that I realize there is something wrong with this AP Invoice, I will like to CN it. But I was stopped by SAP, because I cannot CN a negative amount line item.
    Can anyone advice me how can I Credit Note (in any sense) this negative line item?
    Much Thanks!
    Warmest Regards,
    Chinho

    Hi Chinho,
    I believe this functionality is to be made available in version 8.8. The SAP workaround for 2007 is:
    To cancel an invoice with negative line, please use the workaround as
    per below:
    1. For the rows with the positive Row Total, create an "independent"
    Credit Memo (not based on an Invoice).
    2. For the rows with the negative Row Total, create another Invoice
    with a positive Row Total opposite to the original negative Row,
    and reconcile between the two rows manually via Internal
    Reconciliations. (This option is available in Banking module in
    2005 version and in Business Partner module in 2007 version.)

  • Cannot create AR Invoice negative amount with WithHolding Tax negative amount via DI API

    Hi All,
    I tried to create AR Invoice Document via DI API, but with negative amount and negative withholding tax amount.
    Document added successfully, but when i open the document in SAP, and i open WTax Table information, withholding tax amount become zero,
    Please see image below.
    But when i add the same document through SAP Screen, i can fill WTax Amount with negative amount.
    SAP Version 9.0 PL 5
    Please kindly help,
    Thanks
    Best Regards
    Siddharta

    Hello.
    If this is different to the behavior of the B1 application it should be considered a bug - like any such difference between DI API and app.
    HTH

  • How do i delete a large amount of locked files at one time?

    How do i delete a large amount of locked files at one time or batch unlock the files to delete them?

    Drag them to the Trash and hold your Option key down when selecting Empty Trash.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Sort negative amount in webdynpro ABAP (EHP5)

    Hello,
    We ahve recently installed EHP5. We are now re-implementing Enterprise Compensation Management (ECM) with the new WebDynpro ABAP MSS iViews.
    We have the following issue: one of our column in the compensation planing iView displays positive and negative amounts. the problem is that when we sort this column (ascending or descending), the negative amounts do not appear in the correct order. This is an example how it comes:
    6,050.05
    7,159.59
    8,910.65
    8,980.85
    1,707.10-
    10,110.90
    13,644.30
    16,645.69
    17,135.79
    2,013.95-
    anyone having the same issue?
    Many thanks
    Lucas

    Hello Lucas,
    the numeric content of the relevant columns is interpreted as 'String-like' and sorted in that way, i.e.
    the digits of a number are compared to the digits of another number from left to right. This leads to wrong sorting results as the amount of digits a number consists of is not equal for each number within the same column. Usually issues like this occur if the function module which supplies the content marks the column as sortable (COLTYPE = 'SORTABLE'  but only table COLUMN_CONTENT is filled. Columns marked as SORTABLE which don't contain content that can be sorted 'straight foreward' by
    comparing the characters of one column entry to another from left to right MUST supply a second table SORT_COLUMN_CONTENT which contains the content converted in a sortable way. In your case table SORT_COLUMN_CONTENT must be filled with the numbers enriched with leading zeros, i.e. 000009270000 instead of 92,700.00 which is the 'display value'. please check if correct SORT_COLUMN_CONTENT is provided.
    If this is the case,
    Otherwise please provide correct SORT_COLUMN_CONTENT Further Information about sorting of columns can be found in the Configuration Guide for the Object- and Dataprovider on the Service Market Place (http://service.sap.com/mss).
    Best Regards,
    Deepak.

  • Paymont form via fpl9 for negative amount

    Hi,
    our customer wants to generate a payment form also when the account balance of the customer is negative.
    however, I'm getting an error message that:
    Creation of payment form not possible, amount is negative
    Message no. >6397
    Thanks,
    Vered

    Hi Vered,
    If I'm not mistaken (and I don't think I am ), that message comes from Function module FKK_SAMPLE_0756 - "FI-CA Correspondence - Sample Module for Payment Form Request".
    To override this bit of SAP standard logic, to the very least you'd have to program and assign in FQEVENTS own function module (without the check on negative Amount) to FI-CA Event 0756. We don't have payment forms for negative amounts in our system, but I believe it's doable - the rest of standard logic should function OK with negative payment amount.
    cheers,
    Janis

  • Purchase order approvals for Negative amount

    Hello All,
    Want your assistance on the above mentioned topic.
    We have a business requirement to have Purchase order approvals for Negative amount. I understand from the Below SAR that JD Edwards 9.1  doesn't support PO approvals on Negative amount
    Bug 11022294 : APPROVAL ROUTES FOR DEBIT MEMO - SAR: 8940968
    Appreciate if you can suggest best practice or workaround to meet this requirement.
    Thanks & Regards
    Nikhil M. Pawar.

    Dear Ashutosh,
    Couple of points from my side. We have a similar scenario at a client where I am working. In construction, there are three stages.
    a) Practical Completion
    b) Partial Completion and
    c) Final Completion.
    In the case above, you are not deducting an amount from existing PO, you would be applying a penalty on the Vendor for Failure for not meeting the Practical/Final Completion Certificate requirements. Based on the legal understanding, usually the penalty may vary above and beyond of 10% of value of work not done/ delivered. (This is company to company)
    So we establish that the scenario above is not a case for PO, but for Penalty. Now penalty in construction business again is of three types (My understanding again from experiences)
    a) Time/Schedule based penalty - Levied on vendor due to delays (Ranging for 100 SAR/ Day to 400 SAR/Day - if you are in Saudi)
    b) Cost/ Quantity Based penalty - Deviation from Standard Plan/ over consumption against budgeted quantity in Bill of Ladding
    c) KPI/ Quality Based Penalty - This can be a levied for number for reasons, including non completion of agreed deliverable in Contract. (This can be even 150% of contract value)
    Now, penalty is a revenue to the Organization so this needs to be accounted differently. You apply a Penalty against a PO and create a Debit memo and show the penalty as revenue in the books. This cannot be done if this is entered as a PO.
    So, my point is, you need a customization to capture the penalty and apply it against the PO and account it as a debit memo in Finance side.
    Please let me know your thoughts, I will be glad to hear if I need to be corrected.
    Rgds,
    Abhi

  • Negative amount in the open deliveries field

    Hi All
    Iu2019ve also come across a negative amount in the open deliveries field on the business partners master data screen but there are no open deliveries no orange arrow to click on and it's grayed out for this selected business partner could anybody help with how to fix this issue.
    Regards
    Ronald

    Hi,
    Please run the detect query mentioned in the Note No. : 999124 and if it returns and result, you need to open a support ticket on the portal to get the issue investigated.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Checking amount sum in file body

    helo all
    here i got problem with my scenario.
    in my scneario iam  processing file to bapi.
    before processing i need to check the amount present in file body and to compare with trailer sum if both r same then i need to set flag of bapi to yes otherwise it should be no.
    but while iam checking the decimal amount values in body its chowing some difference.
    i got the sample file anf i checked the sum it should be 5043.4 but the sum (statistic function) was shown like 5043.444 but when i sum it manually its fine.
    so what i have to do to solve this issue.
    waiting for u r response.
    bye.
    regards.
    seeta ram.

    seeta ram
    Now, dont you see the same set of solutions re-appearing?
    If it didnt solve the problem, why dont you use the same thread . It would save the time of other SDNers and also will help you get closer to where you would like to get.
    regards
    krishna
    P.S The fix has already been pointed out. Only you have to implement the fix and make it work. We are here to help you if your are facing any problems while applying the fix but if you don't go anywhere close to applying the fix, it would be hard for us to help you in this regard.
    Message was edited by:
            Krishnamoorthy Ramakrishnan

  • Convert amount from flat file format to user format

    hi,
    how to convert amount from flat file format to user specific format.
    input:  1000.00
    output: 1.000,00 (user specific)
    thanks in advance

    move that value to a type WRBTR variable
    and use write statement.
    data v_wrbtr type wrbtr.
    data v_char(20).
    v_wrbtr = 1000.
    write v_wrbtr to v_char.
    v_char will contain the amount in user format.
    Prerequsite, go to SU3 transaction.
    Defaults tab, chose the decimal notation .
    Regards,
    Ravi

  • Unable to enter a negative amount for payment

    I am trying to enter a negative amount for payments under order items, but I keep getting this error message:
    "The minimum accepted payment amount for 'Financing' is '0'. Please enter an amount greater than '0' to continue.(SBL-SFS-00167)".
    The payment method & type I'm using here is "Financing" & "CareCredit". But, when I enter the payment method & type as "Credit Card" & "Visa", I can enter a negative amount without any errors.
    I think this requires some configuration to override. Can anyone help me with this issue?
    Thanks,
    Raghu

    Hi,
    It's known bug.
    Bug number is 10499290.
    Visit/contact oracle support for more information.
    Good luck
    T.Abed

  • Slow iMovie - Does it has limitation in the amount of video files it can edit?

    Dear All,
    I would like to do some videoediting of holidays video with my iMac i7 12gb ram.
    I have imported with iMovie my dv video and this worked fine. But starting from a certain point iMovie became really slow. Thinking of a memory issue, I added 8gb ram (now 12) but the problem persisted. So I decided to move video files from mac hdd to my gbit lan NAS, and than I got a firewire800 hdd.
    I got a MyBook Studio II (http://wdc.com/en/products/products.aspx?id=210) which I tried using first RAID1 and than to increase speed I configured into RAID0.
    Now, what I noticed is that if the project has a total of:
    - 29gb of video files, editing the project (move, delete, add) and play works quite fine. (project file size about:17mb)
    - 53gb of video files, editing is slow (about 7sec to move or delete a clip)  (project file size about:128mb)
    This happens both if the video and pj files are on the iMac hdd or in the firewire one.
    Does anyone of you know if iMovie has some limitations in the amount of video files it can edit, or if it is not performing correctly under certains conditions?
    Furthermore I will start editing 1080/50p video since I got a new camera. Keep going with iMovie is the right way? Do you suggest other products?
    Thank you for your advices,
    blp

    It appears you have enough processor speed, memory, and hard drives.
    Once these are taken care of, there are two main things that cause slowness 
    1) Events should be logical events. You should not dump all your footage into a single event. A project can use clips from multiple events and the performance is fine.  In DV for example, an event should hold maybe two tapes maximum. If a single tape has three logical events: say Birthiday, Vacation, and Christmas, make three events.
    2)  if you editing feature length movies, you should use Final Cut Pro X. For short movies iMovie is fine. For movies in the middle, it is more of a judgment call. The reason is that iMovie renders everything in one pass. Final cut Pro does background rendering as you go.  If this were the case for you, you would be able to edit at full speed, and you would only notice the slowness or a crash when you shared the movie.

  • Project Closed with a negative amount

    Hi Experts,
    I need your help, I have a project in which I have a negative amount showed in T.Code CN41 as Ttl Commitment, but I have checked in CJ74/CJ76 and nothing appears. I also run KOB2
    Could you help me to fin that negative value.
    Regards,
    Marcos

    Your issue explanation is not quite clear. I think technically system cannot record negative commitment it can be only zero at max.
    however it is still possible to Project objects have negative cost get reported in acutal line item report. This normally happens when you are settling in excess of actual.
    Information required from your side is
    Are you referring commitment or  Cost ?
    The same is reported on which cost object i.e. WBS, Internal Order etc..
    With Regards
    Nitin P.

Maybe you are looking for