Oracle application server 10g http server virtual host

Hi,
I have defined a new virtual host, changed its setting and create a folder with html file for redirection.
Now when i am trying to access that new virtual host it is redirecting me to the old application.
e.g.
old.domain.com taking me old application.
new.domain.com taking me old application.
in HTML file i wrote url like ... http://myappsserver:port .......
could you please tell me am i missing some thing..
thanks

You can find the port usage by executing opmnctl status -l from the command line. This should give you the port usage for each opmn-governed component. In a standard setup, web cache normally runs on port 7777 while Oracle HTTP Server runs on 7778. Alternatively, you can check the httpd.conf for the parameter Listen. This will give you the Oracle HTTP Server port as well.
Did you test with the directive NameVirtualHost added?

Similar Messages

Oracle Application Server 10g on a virtual environment

Hi,
Can anyone provide us the Step by Step approch to install Oracle Application Server 10g on a virtual environment on solaris cluster?

HI,
Oracle is provided two documents for OAS install in Solaris (32bit and 64bit).
Here I am providing both documents.
http://docs.oracle.com/cd/B31017_01/solx86.1013/install.pdf --- Oracle app server install 32bit
http://docs.oracle.com/cd/B31017_01/sol.1013/install.pdf -- orcle app server install 64bit
Award points it is useful.
Thanks,
satya

Just installed HTML DB on 9i, can I just use 10G HTTP server?

I just installed html db from my 10G release 2 dvd (on a machine that only has 9.2.0.6 on it), and went thru the steps outlined on http://www.oracle.com/technology/products/database/htmldb/howtos/howto_use9ir2ohs.html
I installed the schema SYSAUX in an existing 9i database.
When I went to start the 9i http server it errors out and seems to not be working on this server, so rather than troubleshoot this can I not just use the 10G http server that was installed?
If so, I am a complete newbie at this so where might I find a good howto on getting started with HTML DB, I just want to play with it for now, but my eventual goal is to start migrating our MSAccess apps into Oracle and using this as a front end.
thanks in advance!

Thanks Sergio, I think I will uninstall it and start again from the link you gave me, I am curious though, on why it has you download the htmldb and unzip/install it manually etc. when it is an option on the 10GR2 dvd shown?
If I recall correctly, the HTML DB option included the http server already, or is it just the preferred method to install the apache server standalone and HTML DB manually?
Glen

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

Oracle application sever 10g on 32bit and 64 bit platform windows 2003

Hello,
can any body please let me know the performance issues, differences between 32bit and 64bit of oracle application sever 10g? I heard there were some differences... where can i find the information try to look in oracle site not much help...
please help me out because we are in the process of installing the 10 application server on 32 bit platform on windows 2003.
Thanks much....

May be possible but it is probably not tested by Oracle nor is it supported as error correction support for OAS 10g has finished more than a year ago.
A good starting point is My Oracle Support Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=564174.1]564174.1, "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5". Make sure that you always use a 32-bit emulated shell (linux32 bash).
Thanks,
EJ

Oracle 10g HTTP Server + PHP

Does anyone know how to enable PHP support on Oracle HTTP Server (from Oracle DB Companion CD)? I tried to compile PHP on it, bet I get the following error:
Configuring SAPI modules
checking for AOLserver support... no
checking for Apache 1.x module support via DSO through APXS...
Sorry, I was not able to successfully run APXS. Possible reasons:
1. Perl is not installed;
2. Apache was not compiled with DSO support (--enable-module=so);
3. 'apxs' is not in your path. Try to use --with-apxs=/path/to/apxs
The output of /u01/app/oracle/product/10.1.0/cp_1/Apache/Apache/bin/apxs follows
ld.so.1: /u01/app/oracle/product/10.1.0/cp_1/Apache/Apache/bin/httpd: fatal: libdms2.so: open failed: No such file
or directory
apxs:Error: Sorry, no DSO support for Apache available
apxs:Error: under your platform. Make sure the Apache
apxs:Error: module mod_so is compiled into your server
apxs:Error: binary `/u01/app/oracle/product/10.1.0/cp_1/Apache/Apache/bin/httpd'.
configure: error: Aborting
Oracle HTTP server does not have DSO support, is there some possibility to enable it? Or there exists another way to enable PHP support on Oracle HTTP server.

Your existing PHP already extracts as binary - that's what is causing
a problem.
The two functions I mentioned convert to ASCII using their respective
encodings. What format you want depends on what you want to do with
the string.
Here is some code that may be helpful.
<?php
// Fetch a RAW and convert to a hexidecimal representation similar to
// fetching it as a SQLT_STR
$c = oci_connect("hr", "hr", "XE");
// Create test table
$s = oci_parse($c, "create table rtable(rcol raw(2000))");
oci_execute($s);
// Load first 2000 bytes of the test.gif image into the RAW
$img = file_get_contents( dirname(__FILE__)."/test.gif");
$img = substr($img, 0, 2000);
$s = oci_parse ($c, "insert into rtable (rcol) values (:bv)");
oci_bind_by_name($s, ":bv", $img, -1, SQLT_BIN);
oci_execute($s);
// Query the RAW and convert to one form of ASCII representation
$stid = oci_parse($c, 'select rcol from rtable');
oci_execute($stid);
print '<table border="1">';
while ($row = oci_fetch_array($stid, OCI_ASSOC+OCI_RETURN_NULLS)) {
echo "<tr><td>";
echo bin2hex($row['RCOL']);
echo "</td></tr>\n";
echo '</table>';
// Clean up
$stmt = oci_parse($c, "drop table rtable");
oci_execute($stmt);
?>-- cj

10g: HTTP Server and OC4J on different servers?

Can anyone assist with configuring HTTP Server and OC4J on different servers?
I installed AS 10g on both; our application runs fine on one server, with the HTTP Server and OC4J both on the same box.
I need to also test this with the HTTP Server on a separate box.
I added this to mod_ocj4.conf:
Oc4jMount /indox-qa1
instance://cvodev2:oas_dev2.cvodev2.int.sys.com:indox-qa1
Oc4jMount /indox-qa1/*
instance://cvodev2:oas_dev2.cvodev2.int.sys.com:indox-qa1
But when I try to access something like http://cvodev4/indox-qa1 I get this in the logs:
[Wed Jul 06 16:54:10 2005] [warn] [client 10.1.1.231] [ecid: 1120683250:192.152.136.127:1248:1544:1,0] MOD_OC4J_0184: Failed to find an oc4j process for destination: instance://cvodev2.int.camsys.com:oas_dev2.cvodev2.int.camsys.com:indor-qa1
[Wed Jul 06 16:54:10 2005] [error] [client 10.1.1.231] [ecid: 1120683250:192.152.136.127:1248:1544:1,0] MOD_OC4J_0145: There is no oc4j process (for destination: instance://cvodev2.int.camsys.com:oas_dev2.cvodev2.int.camsys.com:indor-qa1) available to service request.
[Wed Jul 06 16:54:10 2005] [error] [client 10.1.1.231] [ecid: 1120683250:192.152.136.127:1248:1544:1,0] MOD_OC4J_0119: Failed to get an oc4j process for destination: instance://cvodev2.int.camsys.com:oas_dev2.cvodev2.int.camsys.com:indor-qa1
[Wed Jul 06 16:54:10 2005] [error] [client 10.1.1.231] [ecid: 1120683250:192.152.136.127:1248:1544:1,0] MOD_OC4J_0013: Failed to call destination: instance://cvodev2.int.camsys.com:oas_dev2.cvodev2.int.camsys.com:indor-qa1's service() to service the request.
I did some ethernet sniffing and it doesn't look to me like the OHS box is even trying to contact the OC4J box.
Is there more configuration I need to do beyond this?
Thanks,
dwh

hi user11159690
Maybe this can help:
"Oracle® HTTP Server Administrator's Guide 10g Release 3 (10.1.3) B25211-02"
"7.32 mod_oc4j"
http://download.oracle.com/docs/cd/B25221_04/web.1013/b25211/confmods.htm#i1025739
Maybe more specifically "Oc4jMount":
http://download.oracle.com/docs/cd/B25221_04/web.1013/b25211/confmods.htm#CIHJBGFB
(tip : You can use "Your Control Panel" to make your name visible in forum posts.)
success
Jan Vervecken

Vista and 10g Http server +apex 3.0.1 Please help

previous unanswered post about not being able to find correct installation method.
I've setup 10gR2+Http server, installed apex 3.0.1 then copied images but from this point on cannot start http server with error 13 in app. log file.
10gEX + apex 3.0.1 works perfectly but my client will need more than 4GB of storage so wanted to upsize.
I've modified dads.conf and all other files as per guide but now http server is giving a '404' error. Should it be marvel.conf?
Can still access EM for 10g
Have checked alllocations for log files but none are being generated.
Have I broken HTTP server?
Please help or give some guidance as I have done this 9 times now without success!
Thanks
Marotuff

Hi.
Oracle HTTP Server is part of a separate download, the Application Server 10g Realease 3:
http://www.oracle.com/technology/software/products/ias/index.html
In the 'For Deployment" section, download the proper Zip File for Windows (It took an hour on my machine) and unzip to a writable folder on your server.
Then you must use the Universal Installer to install.
Choose 'Advanced Install" and choose the HTTP Server option.
Make sure to read the Installation Guide. Good Luck.

Apex on 10gR2 -- Use 11g or 10g HTTP Server?

We're just starting an Apex development effort, and have a couple of environmental limitations to respect in our production and test environments...
i) 10gR2 database
ii) Separation of database and web tiers
Given these constraints we'll be using the Oracle HTTP Server on a different host to the 10gR2 database, so my question is this: are there pros and cons to sticking with the 10g OHS versus adopting the 11g OHS straight off? Do we gain/lose anything in terms of complexity, stability, performance, integration with LDAP, platform options, licensing ... ?
Thanks in advance for any help.

Any errors in error_log? Does strace -p <http pid> reveal anything? Not sure if Suse Linux has pstack command. If yes, run pstack <http pid> and search on Google for the stack trace.
Yong Huang
[email protected]

10g http server setup on linux

I have a single box running 10g on Linux (RedHat 2.x ES). I want to be able to connect to the database with iSqlPlus. I want the http server on the same box as the database.
Is there a good document, a step-by-step guide for setting up the http server so it can connect to the database?
Thank you,
Edward Stoever

If you have installed Oracle Database 10g, iSQL*Plus is already and installed and configured to connect to the default database. There is no HTTP Server as iSQL*Plus 10.1 uses OC4J.
Can you try connecting to iSQL*Plus and logging in? You may need to ask a more specific question if you are having problems with the default install of iSQL*Plus, or you want to do some more specific set up.
Alison

IPlanet Messaing Server v5.1 support Virtual Hosting ?

Hello, I'm using the iPlanet v5.1 messaging server. I've check the release note said it can support virtual hosting (1 mail server with serveal domain). But, I don't kno whow to configure it. Could you help, please ?

See chapter two of the Provisioning Guide, http://docs.iplanet.com/docs/manuals/messaging/ims50/pg/domains.htm#16678
I used the example entries on my home system, worked just fine.

Oracle database XE - Configure HTTP Server

Goodmorning,
I've installed Oracle database 10g Express Edition ona linux server.
Now I can navigate with my browser to the url
     http://xxx.xxx.xxx.xxx:8080/apex
and this is ok to manage my db.
My problem is that I can navigate to the url
     http://xxx.xxx.xxx.xxx:8080/sys
and other subdirectories using my browser.
I want configure my Oracle HTTP server to allow navigation to APEX but prevent navigation to sys direcotries.
I can't change configuration in
     APEX->Administration->Manage HTTP Access
setting "Available only from local server" becuse in this way I couldn't access to APEX too from my client workstation.
Any ideas?

Hi,
the usual way would be to install an Apache http server in front of XE and configure it to be a proxy.
Using an Apache2 you would change the httpd.conf like this:
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_http_module modules/mod_proxy_http.so
RewriteEngine On
ProxyRequests Off
SetEnv force-proxy-request-1.0 1
SetEnv proxy-nokeepalive 1
RewriteCond %{REQUEST_URI} /(([^/]+)(/.*)*)$
RewriteCond %2 =apex [OR]
RewriteCond %2 =i [OR]
RewriteCond %2 =public
RewriteRule ^/(.*) http://localhost:8080/%1 [P]Or you can search the XE-forum for 'proxy'.
If you cannot use an Apache for any reasons (but it is definitely recommended) then you might be able to change the acls for the xmldb folder SYS.
http://www.google.com/search?hl=de&client=firefox-a&rls=org.mozilla%3Ade%3Aofficial&hs=tb3&q=change+acl+xmldb+sys+folder&btnG=Suche&lr=
Regards,
~Dietmar.

Oracle 8.1.7 HTTP server not working error 1067

Hi
Anyone that can help will earn my undying gratitude!
I'm running my final year project on 8.1.7 RDBMS and 9i AS, using wireless and portal. At least I am if I can get it going, installing 8.1.7 RDBMS, updating the symcjit.dll to version as I'm using a P4 and get masses of java.exe errors, perl.dll, jvm.dll etc. And the http server won't start.
I really need some help with this and urgently to, can someone contact me at [email protected] please?
Desparate and disillusioned, but eternally grateful!

Sorry to be a nuisance but this is EXTREMELY urgent!
Apache server on 8.1.7 RDBMS won't start and the one in the 9iAs isn't too happy either. Do I need both of them to run wireless portals? any help really appreciated folks.
Happy Easter!
Michael.

Oracle application express3-10g to 11g DRCP connection problem

[Oracle application express3 +Oracle Identity Management 10g (10.1.4.0.1) authentication] has a performance problem about dedicated connections,
i have 714 sessions, and 506 of 714 is httpd connection of APEX.
so i decided to use DRCP, because database side is 11g. but APEX client side is working on 10g database server + and 10g client + OID 10.1.4,
can i upgrade 10g-PL/SQL-HTTPDclient libraries to 11g instant client easily? is it posible? how?
if you guide me step by step i will be happy,
best regards

Hi user
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Database » Application Express
which you can get more quick response
Regard
Helios

Internal server error - Http server and OC4J intance

Hi
Internal Server error ( GET/<app name>
Hi,
We are using AS10g R1: 9.0.4.0.0 in production and occasionally getting Internal Server Error. And to overcome this problem, everytime we have to restart the HTTP server; we tried re-staring the OC4J instance to find out whether OC4j is causing the problem, however it doesn't work until we restart the Http server. Interestingly Http server serves well other OC4j instances during the error for a particular app runing in different OC4J instance.
ANY HELP WILL BE HIGHLY APPRECIATED.
Here are more details:
It's a J2ee (struts) app.
Operating System: Sun Solaris- 5.10
Http server access log msg:
"GET /<app name> HTTP/1.1" 500 544
Http server error log msg:
MOD_OC4J_0184: Failed to find an oc4j process for destination: OC4J_1
[Mon Sep 8 17:55:13 2008|http://forums.oracle.com/forums/] error MOD_OC4J_0145: There is no oc4j process (for destination: OC4J_1) available to service request.
[Mon Sep 8 17:55:13 2008|http://forums.oracle.com/forums/] error [ecid: 51865290138,1|http://forums.oracle.com/forums/] MOD_OC4J_0119: Failed to get an oc4j process for destination: OC4J_1
[Mon Sep 8 17:55:13 2008|http://forums.oracle.com/forums/] error [ecid: 51865290138,1|http://forums.oracle.com/forums/] MOD_OC4J_0013: Failed to call destination: OC4J_1's service() to service the request.
[Mon Sep 8 17:55:15 2008|http://forums.oracle.com/forums/] warn [ecid: 51865292545,1|http://forums.oracle.com/forums/] MOD_OC4J_0184: Failed to find an oc4j process for destination: OC4J_1
OC4J Log:
Nothing unusual; looks good
Mod_oc4j.conf
LoadModule oc4j_module libexec/mod_oc4j.so
Oc4jConnTimeout 300
Oc4jCacheSize 0
# in response to eSecure findings
RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
Work around:
Re-starting HTTP server

Greetings,
Since we see a 500 error below in the Http server access log msg: the server is unavailable. I suggest changing the OC4J logging to "FINEST" and then run your test again (server reset etc.) and post the log here.
THX
-Mike

Oracle application server 10g http server virtual host

Similar Messages

Maybe you are looking for