Package view error
Interesting product ...
I've tried to load one of our larger and "troublesome" packages into the product. While the initial load worked, when I tried to choose "details" on the package body things started to hang. Same went for grants etc.
When I finally got control back, and tried to return to the package body view, I got the following:
java.lang.ClassCastException: oracle.jdeveloper.cm.dt.browser.jdbc.PlSqlBody
at oracle.dbtools.raptor.utils.DBObject.loadDBData(DBObject.java:70)
at oracle.dbtools.raptor.utils.DBObject.<init>(DBObject.java:45)
at oracle.dbtools.raptor.editors.AbstractDBEditor.loadDBData(AbstractDBEditor.java:41)
at oracle.dbtools.raptor.editors.generic.PLSQLObjectDetails.init(PLSQLObjectDetails.java:41)
at oracle.dbtools.raptor.editors.generic.PLSQLObjectDetails.getGUI(PLSQLObjectDetails.java:92)
at oracle.ide.editor.Editor.getDefaultFocusComponent(Editor.java:170)
at oracle.ideimpl.editor.SplitPane.focusCurrentEditor(SplitPane.java:1097)
at oracle.ideimpl.editor.TabGroupState.focusCurrentEditor(TabGroupState.java:862)
at oracle.ideimpl.editor.TabGroup.focusCurrentEditor(TabGroup.java:527)
at oracle.ideimpl.editor.EditorManagerImpl.focusEditor(EditorManagerImpl.java:1169)
at oracle.ideimpl.editor.EditorManagerImpl.openEditor(EditorManagerImpl.java:1139)
at oracle.ideimpl.editor.EditorManagerImpl.whenOpenEditor(EditorManagerImpl.java:2351)
at oracle.ideimpl.editor.EditorManagerImpl.handleDefaultAction(EditorManagerImpl.java:1912)
at oracle.ide.controller.ContextMenu.fireDefaultAction(ContextMenu.java:345)
at oracle.ideimpl.explorer.BaseTreeExplorer.fireDefaultAction(BaseTreeExplorer.java:1501)
at oracle.ideimpl.explorer.BaseTreeExplorer.dblClicked(BaseTreeExplorer.java:1838)
at oracle.ideimpl.explorer.BaseTreeExplorer.mouseReleased(BaseTreeExplorer.java:1859)
at oracle.ideimpl.explorer.CustomTree.processMouseEvent(CustomTree.java:176)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Platform is windows ....
Thanks I found the problem.
-kris
Similar Messages
-
"Could not create the view" error
Hey everyone,
I'm new to Flash Builder and have been following a tutorial video to learn the basics. Today, when I tried to access my project, this error appeared in the Package Explorer:
Could not create the view: Plug-in "com.adobe.flexbuilder.as.editor" was unable to instantiate class "com.adobe.flexbuilder.as.editor.ui.packageexplorer.FlexPackageExplorer".
I also can't seem to create a new Flex project. If I try to, I can never click Finish. The button just remains faded out.
Below are the details on the package explorer error.
Any help would be much appreciated.
Thanks.
java.lang.NoClassDefFoundError: com/adobe/flexbuilder/codemodel/common/CMFactory
at com.adobe.flexbuilder.as.editor.ui.packageexplorer.FlexPackageExplorer.<init>(FlexPackage Explorer.java:263)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.createExecutableExtension(Re gistryStrategyOSGI.java:170)
at org.eclipse.core.internal.registry.ExtensionRegistry.createExecutableExtension(ExtensionR egistry.java:874)
at org.eclipse.core.internal.registry.ConfigurationElement.createExecutableExtension(Configu rationElement.java:243)
at org.eclipse.core.internal.registry.ConfigurationElementHandle.createExecutableExtension(C onfigurationElementHandle.java:51)
at org.eclipse.ui.internal.WorkbenchPlugin$1.run(WorkbenchPlugin.java:267)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.ui.internal.WorkbenchPlugin.createExtension(WorkbenchPlugin.java:263)
at org.eclipse.ui.internal.registry.ViewDescriptor.createView(ViewDescriptor.java:63)
at org.eclipse.ui.internal.ViewReference.createPartHelper(ViewReference.java:324)
at org.eclipse.ui.internal.ViewReference.createPart(ViewReference.java:226)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
at org.eclipse.ui.internal.WorkbenchPage$ActivationList.setActive(WorkbenchPage.java:4212)
at org.eclipse.ui.internal.WorkbenchPage$18.runWithException(WorkbenchPage.java:3271)
at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
at org.eclipse.ui.internal.Workbench$28.runWithException(Workbench.java:1384)
at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2316)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.flexbuilder.standalone.FlexBuilderApplication.start(FlexBuilderApplication.java :109)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter$TerminatingClassNotFoundExce ption: An error occurred while automatically activating bundle com.adobe.flexbuilder.codemodel (16).
at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:125)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :449)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:211)
at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(BundleLoader.java:381)
at org.eclipse.osgi.internal.loader.SingleSourcePackage.loadClass(SingleSourcePackage.java:3 3)
at org.eclipse.osgi.internal.loader.MultiSourcePackage.loadClass(MultiSourcePackage.java:31)
at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:454)
at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410)
at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:398)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:105)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
... 51 more
Caused by: org.osgi.framework.BundleException: Exception in com.adobe.flexbuilder.codemodel.internal.bridge.CMBridge.start() of bundle com.adobe.flexbuilder.codemodel.
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:806)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:7 55)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:352)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:280)
at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:408)
at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
... 62 more
Caused by: java.nio.channels.OverlappingFileLockException
at sun.nio.ch.FileChannelImpl$SharedFileLockTable.checkList(Unknown Source)
at sun.nio.ch.FileChannelImpl$SharedFileLockTable.add(Unknown Source)
at sun.nio.ch.FileChannelImpl.tryLock(Unknown Source)
at java.nio.channels.FileChannel.tryLock(Unknown Source)
at org.apache.lucene.store.NativeFSLock.obtain(NativeFSLockFactory.java:246)
at org.apache.lucene.store.NativeFSLockFactory.acquireTestLock(NativeFSLockFactory.java:79)
at org.apache.lucene.store.NativeFSLockFactory.setLockDir(NativeFSLockFactory.java:139)
at org.apache.lucene.store.NativeFSLockFactory.<init>(NativeFSLockFactory.java:117)
at com.adobe.flexbuilder.codemodel.internal.common.AbstractTextDatabase.start(AbstractTextDa tabase.java:111)
at com.adobe.flexbuilder.codemodel.internal.search.ASSearchDataProvider.<init>(ASSearchDataP rovider.java:43)
at com.adobe.flexbuilder.codemodel.internal.search.ASProviderFactory.createDataProvider(ASPr oviderFactory.java:47)
at com.adobe.flexbuilder.codemodel.internal.search.SearchIndexManager.addISearchDataProvider dFactory(SearchIndexManager.java:70)
at com.adobe.flexbuilder.codemodel.internal.CMCoreActivator.activate(CMCoreActivator.java:19 9)
at com.adobe.flexbuilder.codemodel.internal.bridge.CMBridge.start(CMBridge.java:77)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl$1.run(BundleContextImpl.java:7 83)
at java.security.AccessController.doPrivileged(Native Method)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:774)
... 67 moreI'm having this issue since ever with FB 4.7 (the normal IDE version, not the command-line one).
The most consistent way I found to resolve it is to delete the output folders of all flex projects, then restart and perform a clean build.
My suspect is that the incremental compilation is flawed, but cannot be sure of it.
P.S. usually the initial error has this root exception
Root exception:
java.lang.NullPointerException
at com.adobe.flexbuilder.codemodel.internal.bridge.WorkspaceSpecification.getStateLocation(W orkspaceSpecification.java:157)
at com.adobe.flexbuilder.codemodel.internal.bridge.WorkspaceSpecification.getFileInStateLoca tion(WorkspaceSpecification.java:149)
at com.adobe.flexbuilder.codemodel.internal.search.AbstractTextDatabase.start(AbstractTextDa tabase.java:81)
at com.adobe.flexbuilder.codemodel.internal.search.ASSearchDataProvider.<init>(ASSearchDataP rovider.java:25)
at com.adobe.flexbuilder.codemodel.internal.search.SearchIndexManager.initialize(SearchIndex Manager.java:155)
at com.adobe.flexbuilder.codemodel.CMCoreActivator.activate(CMCoreActivator.java:189)
at com.adobe.flexbuilder.codemodel.CMCoreActivator.start(CMCoreActivator.java:76) -
How to view errors if bulk collect has thrown errors
Hi,
I have few questions.
1.How to view error whether bulk collect is successful or not
2.What is identified & unidentified relationships in ERWIN
3.How to see the errors whether the sql loder is successful or not
and how to open the log file.Is there any specific command in UNIX
which tells loader is successful or thrown error
4.When executing the pl/sql procedure from UNIX.how to check for errors.
Please provide the answers for this
ThanksUse SAVE EXCEPTIONS clause in your FORALL loop.
Is this for homework/test? -
Crystal Report Windows Forms Viewer Error in 1 Workstation after upgrade of PL
Hi all,
We just upgraded SAP from 8.82 PL02 to 8.82 PL15.
Afterwards, in just 1 workstation, Crystal Reports layouts have Crystal Report Windows Forms Viewer error I attach.
Before the upgrade this error did not happen.
No permissions or authorizations were changed in the workstation.
The Crystal Reports layouts remain working fine in server and in the other workstations.
In the workstation following are installed:
- Operating System Windows 7;
- Microsoft .NET Framework 4.5;
- SAP Crystal Reports runtime engine for. NET Framework;
- Crystal Report 2008 Runtime SP6;
- Microsoft SQL Server 2008 R2 Native Client.
All, but the operating system, are equal to the other workstations.
User has edit access to SAP folders, temp and access to the attach path.
We already uninstalled SAP client and client agent and re-installed it but with no avail.
Can anyone help me?
Thanks in advance.
Best regards,
Pedro MarianoHi San Xu,
Thank you for your input.
However I'm facing problem with each software is suitable.
I installed SAP Crystal Reports for SAP Business One (CR 2011 V14.0.4.738), but with no avail.
Thanks in advance.
Best regards,
Pedro Mariano -
Hi folks,
I am using a cascaded mapping in my OM. I have a graphical mapping followed by the Java mapping. It is a flat file to IDOC mapping. Everything works fine in Dev but when I transport the same objects to QA, the Operation mapping though it doesn't fail in ESR testing tool, gives the following message and there is no output generated for the same payload which is successfully tested in DEV. Please advise on what could be the possible reasons.
Unable to display tree view; Error when parsing an XML document (Premature end of file.)kalyan,
There seems to be an invalid xml payload which causes this error in ESR not generating the tree view. Please find the similar error screenshot and rectify the payload.
Mutti -
Failed to load Execute Package Task error.
Hello Experts,
Excuse my newbie question.
Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
catalog. The package fails to execute with the above said error.
Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
Thanks.As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
Server\110\DTS\Binn".
Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
Hi Jayakarthiks,
To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
media.
Reference:
http://msdn.microsoft.com/en-us/library/ms143731.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support -
Hi all
when i run yaourt to install any things :
package-query: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
why?
what can i do?
I'm very newbie so help me with easy commands!
thankstry to reinstall yahourt :
https://wiki.archlinux.org/index.php/Yaourt -
I sometimes get the following error randomly -
Package Validation Error
ADDITIONAL INFORMATION:
Error at MY_PACKAGE_PLUS[Connection manager "MY_DATABASE"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'USERNAMEZ'.".
Error at MY_PACKAGE_PLUS [Log provider "SSIS log provider for SQL Server"]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "MY_DATABASE" failed with error
code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(Microsoft.DataTransformationServices.VsIntegration)
My package name in SSIS/BIDS is MY_PACKAGE, but in the error I see MY_PACKAGE_PLUS, which was the name of an older version of the package. This error goes away when I close SSIS and then restart it. I wonder why this happens and how do I fix it
? Is this some bug in SSIS ? The same package runs without errors in SQL server agent.
Thanks.It seems the old package reference still exists in your project bin folder or inside stproj file. WHich is why it tries to validate the older package each time when you start the project.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Hi
I may have come to the wrong Forum and if so my apologies but if there is some one who could let me know if i need be concerned of the following errors i have just noticed in Console after having done recent Java And Safari update today.both installations i believe were completed successfully but console is showing the following message.
13/03/2011 13:43:52 Software Update[133] Software Update Package Authoring Error: installation-check results requires a message
13/03/2011 13:38:58 Software Update[136] Software Update Package Authoring Error: <choices-outline ui='SoftwareUpdate'> should only have one <line> element. Put additional <line> elements in a <choices-outline ui='invisible'> element.
Thanks in advance
Colemach_kernel file missing in root of harddrive
replaced, now working again -
JavaMapping in PI 7.1 Error:Unable to display tree view; Error when parsing
hi,
i get by testing in PI 7.1 (operation mapping) this ERROR:
"Unable to display tree view; Error when parsing an XML document (Content is not allowed in prolog.)"
this is my java-programm-code:
import java.io.FileInputStream;
import java.io.FileOutputStream;
import com.sap.aii.mapping.api.StreamTransformation;
import java.io.*;
import java.util.Map;
import javax.xml.parsers.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
/*IMPORT statement imports the specified classes and its methods into the program */
/Every Java mapping program must implement the interface StreamTransformation and its methods execute() and setParameter() and extend the class DefaultHandler./
public class Mapping extends DefaultHandler implements StreamTransformation {
Below is the declaration for all the variables we are going to use in the
subsequent methods.
private Map map;
private OutputStream out;
private boolean input1 = false;
private boolean input2 = false;
private int number1;
private int number2;
private int addvalue;
private int mulvalue;
private int subvalue;
String lineEnd = System.getProperty("line.separator");
setParamater() method is used to store the mapping object in the variable
"map"
public void setParameter(Map param) {
map = param;
public void execute(InputStream in, OutputStream out)
throws com.sap.aii.mapping.api.StreamTransformationException {
DefaultHandler handler = this;
SAXParserFactory factory = SAXParserFactory.newInstance();
try {
SAXParser saxParser = factory.newSAXParser();
this.out = out;
saxParser.parse(in, handler);
} catch (Throwable t) {
t.printStackTrace();
As seen above execute() method has two parameters "in" of type
InputStream and "out" of type OutputStream. First we get a new instance
of SAXParserFactory and from this one we create a new Instance of
SAXParser. To the Parse Method of SaxParser, we pass two parameters,
inputstream "in" and the class variable "handler".
Method "write" is a user defined method, which is used to write the
string "s" to the outpurstream "out".
private void write(String s) throws SAXException {
try {
out.write(s.getBytes());
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startDocument() throws SAXException {
write("");
write(lineEnd);
write("");
write(lineEnd);
public void endDocument() throws SAXException {
write("");
try {
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI, String sName, String qName,
Attributes attrs) throws SAXException {
String eName = sName;
if ("".equals(eName))
eName = qName;
if (eName.equals("NUMBER1"))
input1 = true;
if (eName.equals("NUMBER2"))
input2 = true;
public void endElement(String namespaceURI, String sName, String qName)
throws SAXException {
String eName = sName;
if ("".equals(eName))
eName = qName;
if (eName.equals("NUMBER1"))
input1 = false;
if (eName.equals("NUMBER2"))
input2 = false;
public void characters(char[] chars, int startIndex, int endIndex)
throws SAXException {
String dataString = new String(chars, startIndex, endIndex).trim();
if (input1) {
try {
number1 = Integer.parseInt(dataString);
} catch (NumberFormatException nfe) {
if (input2) {
number2 = Integer.parseInt(dataString);
if (input2 == true) {
addvalue = number1 + number2;
mulvalue = number1 * number2;
subvalue = number1 - number2;
write("" + addvalue + "");
write(lineEnd);
write("" + mulvalue + "");
write(lineEnd);
write("" + subvalue + "");
write(lineEnd);
in developer studio 7.1 i dont get error.
this happens by testing the mapping-programm in ESR.
can somebody help me please?Make sure that the xml created out after the java mapping is a valid xml with only one root node.
Regards,
Prateek -
How to show classic package view in Acrobat 9?
In Acrobat 8, I had my package PDF with the left panel showing the PDF files, the middle panel showing the Pages panel, and the right panel showing the content of the page itself. With a three panel view, I could quickly navigate between PDFs, select a Page, and see the content. This is why I liked packages so much.
How do you create this classic package view in Acrobat 9?
Thank you for the feedback.I am pretty sure the tool is still there. Adobe seems to enjoy moving the tools around, so try some of the other menus. If there is no forms menu there, try the advanced editing as the old location. It seems to have moved with every version.
-
Refresh Order Management Materialized Views errors out in R12.1.3
Hi All -
Refresh Order Management Materialized Views errors out in R12.1.3 when submitted with blank parameters. Please find below error details ..
OEXITORDMV module: Refresh Order Management Materialized Views
Current system time is 15-OCT-2012 11:30:29
**Starts**15-OCT-2012 11:30:29
ORACLE error 12008 in FDPSTP
Cause: FDPSTP failed due to ORA-12008: error in materialized view refresh path
ORA-01555: snapshot too old: rollback segment number 4 with name "_SYSSMU4_3768336236$" too small
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2566
ORA
Start of log messages from FND_FILE
End of log messages from FND_FILE
Thanks,Cause: FDPSTP failed due to ORA-12008: error in materialized view refresh path
ORA-01555: snapshot too old: rollback segment number 4 with name "_SYSSMU4_3768336236$" too small
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2566Please see old threads for the ORA-015555 docs you need to refer to.
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01555&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01555+AND+Materialized+AND+View&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Hi All,
I get the below error when i refresh a report from smartview.
Small reports works fine but if the report is huge i get this error
Smart View Error: Requested Operation Failed. Error: Java.lang.NullPointerE
Smart View 11.1.2 MS OFFICE 2007 SP3
Essbase 11.1.2
Any pointers.
Regards,
Minkyou mean i have to set below in essbase.properties of aps
SET JAVA_OPTIONS=–Xms128m –Xmx1024m
Regards,
Mink -
Currency Translation- Package Status error
I am encountering the following error after running the currency translation package.
The following is the error message in the package log
RUN LOGIC : Run program error,Message Number : ''''
Failed
Application:Sales Package Status :ERROR
Can some one please tell me what does this error mean and how it can be resolvedHI,
This error has been discussed in many threads here in this forum.
Refer these and see if u can get a solution:
Re: Currency conversion issue.
Re: Currency Conversion Problem
Regards
Navin -
Event Viewer errors and warnings
How do I clear Event Viewer errors and warnings?
This one may help.
http://technet.microsoft.com/en-us/library/cc722318.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Maybe you are looking for
-
WriteSettings Error with plug-in servermgr_vpn
Greetings, Just installed OS X Server for the first time. Decided to go with local network with VPN capability. I'm getting the following error; "The error occurred while processing a command of type 'writeSettings' in plug-in 'servermgr_vpn'. I'm no
-
How to decode encoded string for javascript
This is encoded HTML code to be used at javascript function <div class=\"ProductDetail\"><div style=\"width:780px\">\r\n\t<div class=\"baslik\" style=\"margin: 0px; padding: 5px 10px; border-width: 5px 0px 1px; border-top-style: solid; border-bottom-
-
Footer help using cfdocument format="pdf"
I have a very simple PDF report that does the following: Query database and populate customer information at top of PDF Query database and populate a simple string pulled from a memo field in the database. Inserts a totals table at the bottom of the
-
Margine on phone...
Working on my mobile site...I kept everything on the "page" in muse, but when I upload it and view it on my phone, the footer goes off to the right pretty far throwing off the page. How do I fix this? If you need to look at it to see what I am talkin
-
How to alert Folio updated with Single Edition
Hy everybody. No Push Notification exist in Single Edition process. So, if I modified one page (for example) in a Folio already published in App Store, I have to uploaded a new .zip of my App to Apple. How the customers which had already charged the