Parametric SQL in JDBC sender
Hi All,
Is there a way to submit SQL statement with dynamic parametr to the JDBC sender?
I need to get the current date of the PI machine and use it in the "where" cluase of the "Query SQL Statement" dynamically in the "Proccessing" tab of the JDBC sender
Thanks,
Ranny
What I can do is , Suggest you a way for your reqt.
Create a Synchronous Scenario ....
Sender -> XI -> Receiver(JDBC) will Give Response on the basis of your query
On Receiver (JDBC) Side , create `your query like your reqt with Date parameter in mapping Tranformation.
Regards
Prabhat Sharma
Similar Messages
-
How to notify in case SQL query(JDBC sender adapter) does not fetch records
hi,
How can we notify(by alerts or something) in case SQL query(JDBC sender adapter) does not fetch records? In channels logs it only says processing started & finished(no message is created for same).
Thanks,
MayankHi,
1 ) What is exact audit log message ?
2) Try fetching the count in SQL statement if there are any valid records it will give the count.
May for testing you can use <TEST> in update statement.
3) Have you used taskTimeout parameter ?
4) Are multiple channels polling on same table ?
regards
Ganga -
In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .
Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish -
How to use sql variables in jdbc send adapter??
Hi,
i wanna use a variable in the sql statement in the jdbc send adapter.
i know i can key sql statement in the "Query SQL Statement" in the jdbc send adapter.but i dont know how to use variables in the sql statement.
i mean, for example, the sql statement is "SELECT * FROM t_student WHERE READFLAG = 0", but now i wanna instead of "0"(the value of the READFLAG) using a variable.
and if i can use a variable to replace the "0"(the value of the READFLAG above sql statement), then how can i send a value to the variable??
request help in the regard.
thx in advance.
BrianHi,
Use the place holders to pass the data at runtime. Check the below structure for more details.
Hope this helps.
Thanks and Regards,
Kalpesh
<root>
<stmt>
<Student action="SQL_QUERY">
<access> SELECT * FROM t_student WHERE READFLAG = '$FLAG$ </access>
<key>
<FLAG>0</FLAG>
</key>
</Student>
</stmt>
</root> -
JDBC Sender update SQL Statement Question.
I was wondering if there is a way to have the update SQL statement line in the JDBC sender update by time stamp, this would be very helpful. Does anyone know a method of doing this?
In the SAP documentation of the adapter it has this example for using the update SQL statement after the query statement:
SQL statement for query: SELECT * FROM table WHERE processed = 0;
SQL statement for update: UPDATE table SET processed = 1 WHERE processed = 0;
What I want is to be able to put processed = (the current date) instead of processed =1 in the update statement, like this example:
SQL statement for query: SELECT * FROM table WHERE processed = 0;
SQL statement for update: UPDATE table SET processed = (the current date) WHERE processed = ' ';
I seems like you can only use a fixed value for the update statements in the JDBC Sender though, I would like to know if you can use a time stamp or variable there. -
JDBC sender adapter, ...Processing parameters, Update SQL statement
in JDBC sender adapter, ...Processing parameters, there is an Update SQL statement field, can u tell me ...why this is required,,,,,and in one of the example scenario...it was given as <TEST>..
Sudheep,
In the sender JDBC adapter you have the select query to select data from the database.
Let us summer 2 cases,
1. You have <test> in the UPDATE . In this case, during every polling interval the JDBC adapter will end up selecting the same data from the Database. This would not be needed in most f the cases. Why would you want to select the same data over an over again?
2. If you have an update Statement in the Update field you can make sure that the data selected in the selected statement is updated so that the same rows are not selected again.
Take a look at this blog,
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
Regards
Bhavesh -
JDBC Sender Response Message as an XML SQL
Hi All,
I have a scenario as follows :
JDBC Sender <-> XI (synchronous) <-> ABAP Proxy.
I'm hoping that I can use XML SQL form at the JDBC Sender Response message, so I can update some fields at the database using the response message's data. But actually it's not working. Please advise whether it's applicable or not ? If it's not, is there any other way to do that ?
Thanks in advance,
Andy SAndy,
Adding to the discussion here, JDBC sender adapter does not support Synchronous Processing .It supports only Asynch procesing and so, you would need a BPM inorder to update the database again with the ABAP Proxy response.
You would have a sender jdbc adapter polling over the db and getting the data, --> a receiev step in the BPM receives the data.
Next a send Synch Step makes the call to the ABAP Proxy and get the response.
You map this response to a JDBC receiver adapters data format on the basis of the action you need and then use a send step with a receierv JDBC adapter to update the DB.
Regards,
Bhavesh -
JDBC Sender Adapter - SQL-Statement
Hi,
I'm using the JDBC-Sender-Adapter and need to use a SQL-Statement like this:
SELECT * FROM myTable WHERE myDate = <current_date>
Is such a dynamic-sql possible, or can I only use static sql-statements. And if yes how can I solve this problem.
many thxHi Werner,
inside the <b>Query SQL Statement</b> you can use <b>SQL EXECUTE</b>
which can execute a stored procedure
in which you can do
SELECT * FROM myTable WHERE myDate = <current_date>
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a> -
JDBC Sender Adapter : java.sql.SQLException: Cursor state not valid.
Hello all,
We have configured JDBC Sender Adapter which fetches around 10K records with poll interval 1hr from DB2 System .
It was working fine,suddenly it started throwing an exception in Adapter Monitoring :
Error during conversion of query result to XML: java.sql.SQLException: Cursor state not valid.
It is not fetching any records.
Without changing any configurations when we tried to fetch to around 1000 records it's working fine.
For 10K records same exception persists
What could be the reason ?How to resolve this issue?
regards
GangaPrasadHello Christophe ,
Trace in VA :::
Date : 05/09/2008
Time : 11:45:57:750
Message : Unexpected error converting database resultset to XML, reason: java.sql.SQLException: Cursor state not valid.
at java.lang.Throwable.<init>(Throwable.java:194)
at java.lang.Exception.<init>(Exception.java:41)
at java.sql.SQLException.<init>(SQLException.java:40)
at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
at com.ibm.as400.access.JDError.throwSQLException(JDError.java:366)
at com.ibm.as400.access.AS400JDBCResultSet.getValue(AS400JDBCResultSet.java:3580)
at com.ibm.as400.access.AS400JDBCResultSet.getString(AS400JDBCResultSet.java:3223)
at sun.reflect.GeneratedMethodAccessor459222074.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:309)
at com.sap.aii.adapter.jdbc.sql.jdbctrace.TraceInvocationHandler.invoke(TraceInvocationHandler.java:45)
at com.sap.aii.adapter.jdbc.sql.jdbctrace.$Proxy254.getString(Unknown Source)
at com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(JDBC2XI.java:954)
at com.sap.aii.adapter.jdbc.JDBC2XI.invoke(JDBC2XI.java:492)
at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:475)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:119)
Severity : Error
Category : /Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC
Location : com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(ResultSet, ResultSetMetaData)
Application :
Thread : XI JDBC2XI[JDBC_SND_DB2_VehicleReceiving/DB2PRD00/]_170
Datasource : 12428950:/usr/sap/PXI/DVEBMGS01/j2ee/cluster/server0/log/applications/com.sap.xi/xi.log
Message ID : 00145E742794005E0014980B000000BE00044CC763766C4F
Source Name : /Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC
Argument Objs : java.sql.SQLException: Cursor state not valid.
at java.lang.Throwable.<init>(Throwable.java:194)
at java.lang.Exception.<init>(Exception.java:41)
at java.sql.SQLException.<init>(SQLException.java:40)
at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
at com.ibm.as400.access.JDError.throwSQLException(JDError.java:366)
at com.ibm.as400.access.AS400JDBCResultSet.getValue(AS400JDBCResultSet.java:3580)
at com.ibm.as400.access.AS400JDBCResultSet.getString(AS400JDBCResultSet.java:3223)
at sun.reflect.GeneratedMethodAccessor459222074.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:309)
at com.sap.aii.adapter.jdbc.sql.jdbctrace.TraceInvocationHandler.invoke(TraceInvocationHandler.java:45)
at com.sap.aii.adapter.jdbc.sql.jdbctrace.$Proxy254.getString(Unknown Source)
at com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(JDBC2XI.java:954)
at com.sap.aii.adapter.jdbc.JDBC2XI.invoke(JDBC2XI.java:492)
at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:475)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:119)
Arguments : java.sql.SQLException: Cursor state not valid.
at java.lang.Throwable.<init>(Throwable.java:194)
at java.lang.Exception.<init>(Exception.java:41)
at java.sql.SQLException.<init>(SQLException.java:40)
at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
at com.ibm.as400.access.JDError.throwSQLException(JDError.java:366)
at com.ibm.as400.access.AS400JDBCResultSet.getValue(AS400JDBCResultSet.java:3580)
at com.ibm.as400.access.AS400JDBCResultSet.getString(AS400JDBCResultSet.java:3223)
at sun.reflect.GeneratedMethodAccessor459222074.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:309)
at com.sap.aii.adapter.jdbc.sql.jdbctrace.TraceInvocationHandler.invoke(TraceInvocationHandler.java:45)
at com.sap.aii.adapter.jdbc.sql.jdbctrace.$Proxy254.getString(Unknown Source)
at com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(JDBC2XI.java:954)
at com.sap.aii.adapter.jdbc.JDBC2XI.invoke(JDBC2XI.java:492)
at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:475)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:119)
Dsr Component :
Dsr Transaction : d1f629d01d9b11dd984200145e742794
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives : com.sap.aii.adapter.jdbc.JDBC2XI
Resource Bundlename :
Session : 0
Source : /Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC
ThreadObject : XI JDBC2XI[JDBC_SND_DB2_VehicleReceiving/DB2PRD00/]_170
Transaction : SAP J2EE Engine JTA Transaction : [0ffffffbdffffffa6ffffff960086]
User : J2EE_GUEST
Regards
Ganga Prasad -
Update SQL Statement in the JDBC sender
Hello!
I have a AS400/DB2 table which I am polling for my XI scenario using the JDBC sender adapter.
I would like to know if it is possible to use system variables (data/time) in the UPDATE statement field? This because we would like to timestamp the exact date/time we read a table. (We can use stored procedures, I know, but would preferr not if at all possible.) Or is there another way?
Thanks,
NamHello!
a little more detail:
We have a fairly simple scenario. We are polling the AS400/DB2 table for information using the JDBC sender with a SELECT statement in the SQL query. We take the data, map it and push it into SRM.
Bhavesh: What I meant is that for error handlig purposes we would like to update the polled record with date and time at the same time as we poll. Using the system date/time of the db system would be ideal, but XI time would be just fine to. So wondering if there is any way to pick up the system data/time (of either system) and pass it in the UPDATE statement as system variables or some such.
Nimrod: one question.... how do we do the mapping in the poll? Meaning the polling is the trigger of the whole scenario, so there is no mapping preceding it. I am fairly new to XI, especially the mapping bit, any help or advice appreciated!
Thanks!
Nam -
Avoid JDBC sender error: Execute statement did not return a result set
Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein EmhjellenHi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno. -
JDBC send data to oracle, oracle only accept column name in Upper case
Hi experts,
I am doing a scenario File --> XI --> JDBC, JDBC send data to a Oracle 10g database, I have configured JDBC receiver to use XML-SQL format. in oracle database , table "EMPLOYEE" has a column "NAME", but when I send data to oracle using JDBC receiver, the column is "name", then XI complains
" 'EMPLOYEE' (structure 'insert'): java.sql.SQLException: FATAL ERROR: Column 'name' does not exist in table 'EMPLOYEE'.
can anyone help me to let oracle accpet column "name". I can't change colum in JDBC receiver from "name" to "NAME".
Thanks a lot.<i>can anyone help me to let oracle accpet column "name"</i>
Making Oracle case insensitive is not possible (in my opinion). By default all object names are stored in UPPER case in the rdbms dictionary.
When XI searches for column name in Oracle, this search is case sensitive. So u have to configure accordingly.
Regards,
Prateek -
Update query not working in the JDBC sender Communication channel
Hi,
We are working on JDBC to File scenario. As per the configuration, XI should pick the data from SQL database every 20 secs and should update the corresponding flag. We are using subquery in the select and update statement as both header and detail tables are involved.
Now the issue is, select query is working fine but update statement is not working as expected. It is somehow updating some other records rather than doing for the ones selected by the adapter.
Moreover logSQLstatement is also not working. Hence we are unable to identify the records which are getting updated.
Please advise.Hi Rumi,
See Question 8. Transaction Handling (Sender) in [SAP Note 831162 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 JDBC Adapter|https://websmp130.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=831162].
8. Transaction Handling (Sender)
Q: If I have the following configured in a JDBC Sender:
Select Query:
SELECT column FROM TABLENAME WHERE FLAG = "TRUE"
Update Query:
UPDATE TABLENAME SET FLAG = "FALSE" WHERE FLAG = "TRUE"
How do I know that the JDBC adapter will not update newly added rows (rows that were
added between the time that the SELECT and UPDATE queries were executed) that were
not read in the initial SELECT query?
A: The SELECT and the UPDATE are run in the same DB transaction, i.e. both statements
have the same view on the database.
Make sure that both statements use the same WHERE clause. An additional
requirement for the correct operation of this scenario is the configuration of
an appropriate transaction isolation level on the database
(i.e., repeatable_read or serializable). You might also consider using a
"SELECT FOR UPDATE" statement instead of a plain SELECT statement to
ensure proper locking on the database. "SELECT FOR UPDATE"
is not supported in MS SQL database. In this case please make use of an
appropriate transaction isolation level on the database. For more details
please contact your DB vendors.
After, see Transaction Handling Issues in [SAP Note 1039779 - JDBC Adapter issues(Escape character,Transaction handling)|https://websmp130.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1039779].
Best Regards.
Pedro Baroni -
JDBC Sender Communication channel stop working
Hi all,
I'm facing with a strange problem: I have a db to db scenario (SQL server to Oracle) that has been tested and that was working properly.
But when we started again our tests after some days, without doing any change, the flow didn't start anymore. The problem is in the sender jdbc communication channel:
creating it again with a NEW NAME, and changing the configuration the flow starts again. I try to explain the checks that I did:
- from the runtime workbench the adapter looks ok: green and making polling to the db (obviously without select any record even if we were sure that the select condition was satisfied by some records).
- I tried to simulate some changes re-activating the communication channel.
- clear cache
Nothing was working,the only solution was to re-create the cc with a new name (deleting the old one and creating a new one with the same name is not working as well). But we cannot consider this solution in a production system.
I have several scenarios like this and this problem happened three times in some months and every time with the jdbc sender from SQL server (never with the sender from Oracle).
There is someone that has any suggestion?
Thanks in advance,
Luciana AgostiniHi Luciana,
There is nothing that you could do in PI that could help because most of the places where there could be a problem like cache or with adapter statuses you have already looked into . For the sake of a second opinion see what prateek srivastava has to say.
Basically a n/w connection problem or at the SQL db level.
Rgds
joel -
Hi everybody
I have the following error in my JDBC to JDBC scenario; I configured the JDBC sender adapter and receive the following message back. In the Configuration I set Document Name to MT_ScanningStatus:
<?xml version="1.0" encoding="utf-8" ?>
<MT_ScanningStatus>
<row>
<ScannerNb>1</ScannerNb>
<Status>0</Status>
</row>
<row>
<ScannerNb>2</ScannerNb>
<Status>2</Status>
</row>
<row>
<ScannerNb>3</ScannerNb>
<Status>0</Status>
</row>
<row>
<ScannerNb>4</ScannerNb>
<Status>2</Status>
</row>
</MT_ScanningStatus>
I defined the corresponding datatype as follow:
DT_ScanningStatus Complex Type
row Element 1...unbounded
ScannerNb Element 1
STatus Element 1
In the following Mapping I tried to Map this structure to the Structure used to send an Update SQL Statement to the JDBC Receiver to update the same table. A normal Test in the Mapping Tool runs fine but when I enter under source the above incoming Message from the JDBC Adapter I got the following error. I think the incoming message cannot be interpreted. Can someone support me? I read the documentation for the JDBC adapter and also a lot of weblogs and discussion threads. Maybe someone knows a weblog describing more detailed the sender adapter and how to handle the incoming Message!!
Thanks in advance Oliver
14:58:03 Start of test
Compilation of MM_JDBC_to_JDBC_test successful
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:130)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
Root Cause:
com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)(:main:, row=1, col=8) -> com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2009)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2657)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
Caused by: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2009)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2657)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
... 3 more
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)Hi Oliver,
>>>>source the above incoming Message from the JDBC Adapter I got the following error. I think the incoming message cannot be interpreted.
do this:
in the test tab try your mapping once more
(the correct one)
then save the source xml as file
next compare this saved file with the one
you get from the jdbc sender
>>>>>Declaration not allowed here.(:main:, row:1, col:8)
and compare the first lines in those two XML files
are they the same?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Maybe you are looking for
-
Tutorial for a Spry photo gallery with thumbs and buttons ???
Anyone know of a a tutorial for building a Spry photo gallery with both thumbnails and next, previous, stop and play buttons(functions) ??? Like the ones on Adobe's Photo Gallery demos; http://labs.adobe.com/technologies/spry/demos/pe_gallery.html A
-
Integrate Multiple Captivate HTML5 Application Simulations inside a single course package
Hi, We are using Captivate-8. We wants to integrate Multiple Captivate HTML5 Application Simulations inside a single course package. There is an option to create 'Aggregator Project' to do so if you have Flash (swf) output. As we are generating HTML5
-
Zen is playing the song that is above the one that i wanted to p
hello,?i got the zen at 2 this afternoon, it said charge it for 4 hours... i did (i did 5 hours but it still did not take away the charging icon)?i disconnect it and start playing the music but the Zen is playing the songs that are above the song tha
-
Roaming Network - Channel Question
I have an Airport Express and an Airport Extreme which I have set up for roaming, so that no matter where I am in my house I am getting coverage from at least one of them. Is it best to have the two base stations on the same channel or on different o
-
Why did my audio sync up better in iMovie than FCP?
Hi, I started on a project in iMovie HD, then realized that FCP is probably the better way to go (ability to crop clips and maintain corresponding audio). But in FCP, the audio is out of sync, and I can get it only to within 1 frame, while in iMovie