JDBC send data to oracle, oracle only accept column name in Upper case

Hi experts,
I am doing a scenario File --> XI --> JDBC, JDBC send data to a Oracle 10g database, I have configured JDBC receiver to use XML-SQL format. in oracle database , table "EMPLOYEE" has a column "NAME", but when I send data to oracle using JDBC receiver, the column is "name", then XI complains
" 'EMPLOYEE' (structure 'insert'): java.sql.SQLException: FATAL ERROR: Column 'name' does not exist in table 'EMPLOYEE'.
can anyone help me to let oracle accpet column "name". I can't change colum in JDBC receiver from "name" to "NAME".
Thanks a lot.

<i>can anyone help me to let oracle accpet column "name"</i>
Making Oracle case insensitive is not possible (in my opinion). By default all object names are stored in UPPER case in the rdbms dictionary.
When XI searches for column name in Oracle, this search is case sensitive. So u have to configure accordingly.
Regards,
Prateek

Similar Messages

OIM 9.1.0.2 - Weblogic JDBC Multi Data Sources for Oracle RAC

Does OIM OIM 9.1.0.2 BP07 support Weblogic JDBC Multi Data Sources (Services>JDBC>Multi Data Sources) for Oracle RAC instead of inserting the "Oracle RAC JDBC URL" on JDBC Data Sources for xlDS and xlXADS (Services>JDBC>Data Sources> xlDS|xlXADS > Connection Poll> URL) ?
If yes, is there are any other modifications that need to be made on OIM, or just changing the data sources?

Yes, it's supported. You install against one instance directly of the Rac Server. Then you update the config.xml file and the jdbc resource in your weblogic server with the full rac address. It is documented for installation against RAC. http://docs.oracle.com/cd/E14049_01/doc.9101/e14047/database.htm#insertedID2
-Kevin

The error: "Oracle Error 904 / Invalid Column name"

When I try to take the Oracle Backup with the Exp command. I got the following error.
The error: "Oracle Error 904 / Invalid Column name" .
Any solution or suggestion?????????

Asif, to add another question to the list of things to check. Is the version of the exp utility you are using to perform the export operation the same version as the database? If not, that would explain the error.
If you are trying to export using a newer version of the export utility that generally will not work. You should switch to using the db version.
If you are exporting using an older version because the target is an older version then usually you need to run the catexp# where # is the version number script for the target version that Oracle provides in the $ORACLE_HOME/rdbms/admin directory.
HTH -- Mark D Powell --

Displaying only the column names

hi there,
is there any query to fetch only the column names from a table, excluding the datas from that particular column?
Thanks,
Balu.

SQL> select * from dual
2 where rownum < 1;
no rows selected

JDBC Sender - Wrong SELECT statement (Oracle driver)

Hi,
3 days ago I was having a problem with my JDBC Sender adapter [JDBC Sender adapter is reading but then there isn't the message in SXMB_MON; .
Finally I discovered what's wrong but I can't understant why is not working. When I deleted the "WHERE" condition in my SELECT statement all worked OK (except that I need the WHERE statement...).
Why that statement is not working in my JDBC Sender:
SELECT * FROM MATERIALES WHERE LEIDO<>'X'
and that statement works:
SELECT * FROM MATERIALES
The field "LEIDO" is my flag that I must set to X when I read with the UPDATE statement, so I need the where condition...

Thanks Christopher but still not working
I tried two new statements:
1 - Escaping: SELECT * FROM MATERIALES WHERE LEIDO <> 'X'
2 - Changing the operator symbol: SELECT * FROM MATERIALES WHERE LEIDO != 'X'
The nº1 gives me an error of invalid character
The nº2 has the same effect than the other symbol, the adapter reads from the DB but no XML message is generated and no payload to check what's happening... just a message ID without information and without a message generated in SXMB_MONI

Oracle 10g - Defining the column name in Non English

Hi Experts,
I have an exisitng application which is developed on Windows using ASP Technology and uses Oracle 10g 10.1.0.2.0.
The application is supported with an instance of Data Base within which multiple tablespaces are created for different clients. The application is developed in such a way that some of the tables arecreated dynamically and the columns are named using the data entered through the UI.
This application needs to be globalized now. The problem is, the column name entered through the UI can be in any language based on the client's settings and those values in turn will be used for naming the columns in the tables.
1) Can I have the column names to be named using non english characters in Oracle 10g DB? If so,
1.1) what should I do to configure the exisiting Oracle instance to support it?
1.2) To what level is that configuration possible, is it per DB instance level (or) can it be done at Tablespace level. I would like to configure each tablespace to host tables with columns defined with different languages, say for example, tablespace 1 will have tables with Japaenese column names and tablespace 2 will have tables with German column names?
2) What should I do to make my entire DB to support unicode data i.e., to accept any language strings. Currently all strings are declared as VarChar2, should I change all VarChar2 to NVarChar2 (or) is there a way to retain the VarChar2 as is and make some database wide setting?
Please note that I do not have an option of retaining the column in English as per the Business Requirement.
Envionment:
OS - Windows 2003 32 bit
Oracle 10g 10.1.0.2.0
UI forms in ASP
TIA,
Prem

1. Yes, you can.
SQL> create table ÜÝÞ( ßàá number(10));
Table created.
SQL> insert into ÜÝÞ values (10);
1 row created.1.1 and 1.2 and 2. You can choose UTF as your default character set. It allows the user of non-English characters in VARCHAR columns in your whole database. It is not per tablespace.
SQL> create table ÜÝÞ( ßàá varchar2(100));
Table created.
SQL> insert into ÜÝÞ values ('âãäçìé');
1 row created.

Flat file data upload - happens for only 1 column

Dear Experts,
Goal: To upload data from flat file (with 3 columns-char3,language,text) to characteristic (texts).
Problem: I am doing through CSV File but when i click on preview i am able to see data only in first column, the other two columns are empty.
More details:
I have created this data source in data source tab.
Adapter - Load text type file from Workstation.
data format -Seperated with seperator (CSV).
Data Separator     - ,
Escape Sign     - "
File name      - C:\Documents and Settings\hans\Desktop\mtype.txt
Fields
/BIC/TSMOVTYPE           CHAR     3
LANGU               CHAR     2
TXTSH               CHAR     20
Can anyone give me idea?
regards
BI Learner

Hi,
You can try this:
1. After ESCAPE SIGN, there will be an option " Number of rows to be left". Put 1 there.
2. In your flat file, leave the 1st row blank or add anything in the first row for all the three columns.Save as CSV file. Note that the file must have the same sequence as in the data source.
3. Check your transformations. Data source fields should be mapped correctly to the right side.
try to load now. Hope it'll help.
Preet

How to read the data from an internal table,when column names are known

Hi All
I have a specific requirement. I got an internal table with many fields (let it be my_tab). Some of the fieldnames (column names in internal table my_tab) are stored in separate internal table(let it be my_fields).
I need to store/read data corresponding to the fields (whose name is stored in my_fields) from my_tab.
I am able to build dynamic table (referred by field-symbol) with respect to the given field names in my_fields.
But i am unable to read the data corresponding to the fieldnames from my_tab.
Please provide me some pointer in this regard.
Regards
Swetabh Shukla

HI All
Thanks for the prompt response. I got solution for my question. Please check below thread. For quick reponse i posted my question in one more category. Thanks to all of you.
How to read internal table w.r.t. fieldnames stored in other table

ThunderBird sucks. Step 1: Type in your recipients emails. Step 2: Send your email. Step 3:Error can't send because I suck and only accept contacts in your list

Uninstall.

I remember having a similiar problem. It was caused by the session not using the properties passed in. I seem to remember I needed to set a system property at startup, but can't remember what it was. JGuru has this to say though:
Q:
I'm getting my Session with Session.getDefaultInstance and its not getting changes to the Properties passed in. What's wrong?
A:
In getDefaultInstance(Properties props), the Properties are only used in the initial call. Future calls ignore the setting, returning the previously created Session. If you need to change the Properties, like to change SMTP servers, you should use getInstance(Properties props) instead.

Import data from txt-file with reading column names

Hello,
after changing the the export of my simulation programm I can't use the solution postet here, wich works well. (I branded the post as soluted thats why I start a ne post)
Can anybode please tell me how to adept the code to import the new type of txt file. Here the name of the columns are in the first line aof the columns, like this (with ignoring the first lines).
"TIME      "    "Sitzbasis_X"    "Sitzbasis_Y"    "Sitzbasis_Z"    "Achsklammer_Z"    "Antriebsachse_Z"    "Gegengewicht_Z"    "Lenkachse_Z"
0.000000e+000    -5.472285e+003    -1.886681e+002    1.812099e+004    4.539113e+004    -1.252936e+005    -1.499764e+004    -9.806650e+003
1.000000e-003    -1.722846e+003    -1.141275e+002    8.443419e+003    2.475389e+004    -7.533712e+004    -1.138092e+004    -9.624729e+003
2.000000e-003    -3.964053e+002    -7.694600e+001    3.186345e+003    1.399086e+004    -5.653730e+004    -9.956198e+003    -9.311346e+003
I added an example file
Thanks for Help
Gabriel
Solved!
Go to Solution.
Attachments:
TXT-File.txt ‏115 KB

Hello Gabriel
You can use the DataPlugin Wizard (Navigator>>File>>DataPlugin Wizard) to define a new file import filter for your data. It will take only one minute.
Please found the uri file I create for you. Copy the attached file to your disk, unpack it and double click the uri file.
Then you can open your file by using "open with".
Hope this help
Attachments:
TXT_File_DataPlugin.zip ‏4 KB

To Select Data from Mutiple Table having different column name

Dear All,
I have 100 tables under one user Operation, each table has column containg the code of the Data Entry Operator, But name of the column in each table is different.
Can anyone give the script to run from SQL PLUS so the we can find the total entry of each D.E. Operator per month.
Thanks and Regards,
Manoj

Perhaps the UNION ALL operator is what you want.
SELECT data_entry_operator, count(*) AS qty
FROM(
SELECT de_oper AS data_entry_operator FROM a
UNION ALL
SELECT d_e_operator FROM b
UNION ALL
SELECT d_e_op FROM c
GROUP BY data_entry_operator;

JDBC Sender - Oracle Stored procedures

hi all
i am working on JDBC sender - File receiver
I am fetching data from Oracle database
if i write select query directly in sender adapter the scenario is working properly but when try to write stored procedure in oracle and use execute statement in JDBC, adapter is throwing error.
As in oracle to fetch multiple rows i have to use cursors .
i read lot of articles in forum but still not clear on following issues :can any one solve them?
1 . To get multiple rows can i write SP without cursors?
2 . If SP is using cursor do my XI accept it or it only accepts resultset? in that case how to write sp.
thanks & regards
sheetal

Sheetal,
Adding to Jai Shankar's reply, Like pointed out, Oracle Stored Procedures return Cursors and XI sender JDBC adapter expects resultsets and so it is not possible to call Oracle SP's from Sender JDBC adapters.
But, I have also come across a few recent threads where there have been discussions that this is possible from SP 16 onwards. I have not been able to check and confirm on this, but, maybe you can check your SP level and see if you are below SP 16 . If yes, definetly not possible. If SP 16, or above, a Quick OSS to SAP should surely give the answer if it is possible or not!
Do let us know your findings.
Regards
Bhavesh

JDBC Sender - Different number of records selected and updated.

Hi people,
We have a JDBC -> Abap proxy scenario. The JDBC sender is pooling an Oracle database to retrieve data from a table X, each 30 minutes. The select and update statements in jdbc sender are below
SELECT FIELD1, FIELD2, FIELD3 FROM MY_TABLE WHERE STATUS = 1
UPDATE MY_TABLE SET STATUS = 2 WHERE STATUS = 1
Sometimes the message sent to Abap proxy has, for example, 400 records. Looking at runtime workbench, message monitoring, for the same message there is a log like this
Channel SENDER_JDBC_CHANNEL: Query executed successfully. Start update
Channel SENDER_JDBC_CHANNEL: 510 row(s) updated successfully
Someone has already experienced something like this? How can I handle this to guarantee to update only those read records?
regards.
roberti

Hi All,
Even we are facing the same problem.
In our scenario, receiver is SAPR3. (IDOC)
Will this parameter serialization work in our case?
1. SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM PMBPITS.PITS_UNITY WHERE STATUS = '01' and rownum<200 .
2. UPDATE PMBPITS.PITS_UNITY SET STATUS = '02' , SAPTIMESTAMP = sysdate WHERE STATUS = '01' and rownum<200 ( currently the value is rownum < 5 )
Thanks!!
Regards
Gouri

JDBC Sender Selects Queries

I know that the JDBC sender adapter can handle joins, but can it handle more sophisticated SELECT queries such as subselects, group by, rownum, etc. In other words, are there any limitations in the SELECT query?
Thanks in advance.

Hi Bevan,
The only limitation with XI30-JDBC Sender Adapter is with Oracle Stored Procedure/Functions, as Oracle SP Query returns a cursor, and not a resultset.
Thanks
Prasad

JDBC sender adapter - driver problems

Hi.
Iu2019m struggling with a little problem regarding the JDBC sender adapter, querying an Oracle database.
Iu2019m making a simple SELECT statement, where one of the fields is of the typeu201DTIMESTAMP(0) WITH LOCAL TIMEu201D.
Making the query in a SQL client works just fine, but in the JDBC sender adapter, it generates this error u201DError during conversion of query result to XML: java.sql.SQLException: Session Time Zone not set!u201D
Iu2019ve searched for answers on numerous forums, and found one place, where the following where the solution:
>>> Hi. The issue is that the driver itself needs to have a time zone
>>> set. You have to call setSessionTimeZone() on the connection object.
Unfortunately it is a bit hard to call this function in the adapter.
Any of you guys have an idea what to do?
I can add, that making a query, where no date fields are selected, works fine in the adapter.
Regards...
Peter

Problem solved...
Put a conversion (CONCAT, SUBSTR, TO_CHAR, etc.) around the date field you are about to fetch, and it works just fine.

JDBC send data to oracle, oracle only accept column name in Upper case

Similar Messages

Maybe you are looking for