Parent Job Order & Childs

Dear All
I have a Bill ot Material for an Item containing 6 Levels including many Phantoms ,Raw Materials and Subassemblies
I would like to create a Job order for the Parent Item only and child Job orders created automatically for all Subassmbly Items including at the BOM
Is it possible and if it's ,how ?
Regards
Amr Hussien

Hello again, Amr.
I have also seek in Metalink and I have found one thread in which the solution was the following:
"Hi,
You need to have a few setups in place for this.
In BOM Parameters form for that Inv Org :
Pls. set Create Lower Level Supply to Auto Created Configuration Items and ATO Items. In this case if you second level Item in BOM is an ATO Item it will create WIP Job.
Also ensure that this is a make Item.
If your second level item is not ATO Item this will not create WIP Job now. This will create WIP for 2nd level only if you run MRP/ASCP.
Hope this helps. "
Regards......

Similar Messages

  • Bapi or FM or tabel or any standard transaction code for Production order linking to get child production orders based on parent production order

    Dear Guru's,
    we have a requirement i.e. user can convert planned orders in to production orders (CO41) based on those production orders we can get Route card( Z Smart form)  presently we are using manual input for that Route card. recently we got requirement for this i.e. make to automatic generation of route card for this requirement we need to get the list of child's production orders based on parent production order
    so as per my requirement i need to get all child part numbers production orders based on parent production order number and quantity i tried in MD4C and CO46 but those transactions codes are picking multiple lines also so for this requirement please give your valuable suggestions
    Regards,
    Venkat 

    Dear Friends,
    Thanks for your reply,
    My business process is MTS purely strategy 10, for route card all components with production orders we can give input as like bellow these production orders are converted from planned orders,between few components are don't have production orders those are F-30 materials,because of this reason i need link for production order to child components orders
    01
    IND1
    IND1
    A1CE2003520103-005
    55685815
    02
    IND1
    IND1
    A1CE2003520103-010
    55685814
    03
    IND1
    IND1
    A1CE2003520103-015
    55685813
    04
    IND1
    IND1
    A1CE2003520103-020
    55685812
    05
    IND1
    IND1
    A1CE2003520103-025
    55685811
    06
    IND1
    IND1
    A1CE2003520103-030
    07
    IND1
    IND1
    A1CE2003520103-035
    55685810

  • How can a parent restrict a child's access to a PARENT'S PRE-EXSISTING iTunes account via iCloud's Family Sharing Program?

    How can a parent restrict a child's access to a PARENT'S PRE-EXSISTING iTunes account via iCloud's Family Sharing Program?  To explain further... I have a young son who is on my iCloud family sharing program... I am excited to be able to share SOME of my music in my iTunes library, but there are some songs and music videos that are not age appropriate for him and currently there is no way to restrict him from viewing and downloading anything off of my iTunes library.  Yes, I suppose I can delete the songs he shouldn't have access to, but I don't think I should have to do that... I paid for them and still like them and listen to them while I work out or am without my kids.  Is there a way for me to personally select which songs/videos I would like to "hide" from my children in an effort to shield them from inappropriate content?

    Hello ggg39,
    Welcome to the Apple Support Communities!
    I understand that you have some content in your iTunes library that you would like to restrict access for the child set up on Family Sharing with you. To do this, you can set restrictions on the child’s device as described in the attached article. 
    Family Sharing - Apple Support
    Now kids under 13 can have their own Apple IDs. As a parent or legal guardian, the family organizer can create an Apple ID for a child and add the child to the family group automatically. Ask to Buy is turned on by default, and the organizer can also limit the content kids have access to on their devices through Restrictions on an iOS device or parental controls in OS X and iTunes.
    For more information on restrictions and how to set them up, please reference the next attached article. 
    About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
    Have a great day,
    Joe

  • WIP - Job Order Pending for Completion Transaction Reprt

    How can we get report - job order pending for completion transaction from WIP module?
    Please give us solution.
    Thanks & Regards,
    PressureJet Systems Pvt. Ltd.
    Edited by: PressureJet Systems Pvt. Ltd. on Apr 7, 2013 9:57 PM

    Can you elaborate your question more?
    Mahendra

  • Creating Job Order without Assembly Routing

    How can you prevent Users from Creating Job Order without creating routing to the Assembly used
    Regards

    Hi Laxmikant
    Please note the steps
    Create a BOM Application in OS30
    Create a new BOM ID in OS31 with BOM Usage as Production
    Assign this BOM ID in BOM Application
    Ensure that ID is responsible for Production planning alone.
    Then in that ID maintain a BOM alone without any items.
    Assign this BOM Application in Order type dependent parameters in OPL8
    Now u can create a production order w/o BOM
    Rgds

  • Creation of Sub Job Order/ Maintenance Order in Plant Maintenance Module

    Dear SAP Expert and Gurus,
    I am new in SAP Plant Maintenance Module, and right now having problem to create sub Job Order/ Sub Maintenance Order. Kindly provide the step on it.
    Thank you
    Regards
    Leonard Tan

    hi
    check out this link
    http://help.sap.com/saphelp_40b/helpdata/EN/5b/ae2e484b8611d182ba0000e829fbfe/content.htm

  • Parent talking to child fails some of the time?

    Hi All,
    Have others found that sending a value (stored in a variable) from a parent (main timeline) to a child (movie clip) fails some of the time but only when the movie is running as a .swf (it never fails when testing in authoring)?
    My main timeline's actionscript has:
    XYZ_ChildMC.variableA = false; //parent talks to child movie clip
    In the child MC script:
    import fl.video.*;
    var variableA;
    function completeHandler(e: fl.video.VideoEvent): void
         if (variableA == false)
                 myFLV.seek(0);
                 myFLV..play();
    This seems to fail about 5% of the time when running/rerunning the .swf in a browser.
    Anyone have a similar experience?
    Thanks

    never had that problem.  most likely you have a timing issue.
    use the trace function or textfield to determine if completeHandler is executing before variableA is assigned.

  • How to obtain parent record from child record in relationship using API

    Hi,
    I have a record in the main table that is the child in a parent/child relationship to another main table record.  Using the Java API, how would I obtain the parent record in the relationship where I am starting with the child record?  In the API there seems to just be calls for getChildren, but not a getParent type call.
    Appreciate any immediate help that can be provided.
    Thanks,
    Eddie

    Hi Eddie,
    Please follow the below steps to retrieve only parents of a child Record.
    1. Create RetrieveRelationshipsCommand.
    2. Set the parameter RelationshipId.
    3. Set the parameter Anchor Record and Anchor Record Id. In this case the child record for which parents records to be retrieved.
    4. Set the parameter setGetChildren as false . This retrieves only the parent records for the specified child reocrd.
    5. Execute the RetrieveRelationshipsCommand.
    6. Retrieve member records from above step.
    Hope it helps
    Regards,
    Neeharika

  • Automatic status heritage from parent item to child item in Instal Base R12

    Hi,
    Do you know please how to deactive automatic heritage of status from parent item to all child items of instal base when updating parent item status in R12?
    When I update status of package in Instal Base, statuses of all child items are updated automatically with same value.
    I am using R12 standard API's and I don't see any parameter that can help ...
    Must I see the Ebs parameters ? Profile options?
    Thx

    Did you check if the serial ABN656 is the parent and has child components under it? Check the below query for the same. Additionally you can also navigate to Oracle Installed Base Agent User responsibility, search for ABN656, click on the record, navigate to Configuration tab and see if this serial has any child components.
    select *
    from csi_ii_relationships cir
    ,csi_item_instances cii
    where cii.serial_number = 'ABN656'
    and cii.instance_id = cir.object_id
    Thanks
    Shree

  • Warning when closing Job Order

    Hi All,
    Is there a way to get message/warning or prevent when closing Job Order but Job Order still not Completed yet? Maybe profile or setup which Oracle provide
    Thank you
    Regards,
    Wijana

    Could u pls share the error details.

  • To know the list of the Job Orders are involved in making the Out Product

    Hello All,
    Please let me know how do I get the list of the Job Orders are involved in making the Out Product.
    Thanks in Advance.

    Hi,
    "Making the out product" does this mean you want to know what are the Outside Processing Involved jobs?? If so you can run the "WIP Outside Processing Report" to see the jobs at supplier for OSP.
    If you meant something else please elaborate.

  • To Obtain parent and its child categories

    Hi,
    I have a "categories" table. I use MySQL.
    categories
    category_id int(10)
    category_name varchar(255)
    parent_category_id int(10)
    category_id category_name parent_category_id
    1 A 0 -- 0 represents parent level
    2 B 0
    3 C 1
    4 D 1
    5 E 2
    I need a query to display parent and its child categories like:
    category_id category_name parent_category_id
    1 A 0
    3 C 1
    4 D 1
    Thanks.

    Can't help you with MySQL.
    But if you google for "mysql start with connect by", you may find what you need.

  • Using Substitute Items at Job Order Level

    dear gurus,
    i have client requirement that is:
    Semi-Finish Product : A Produce by XYZ CO.,
    Packaging Material : B Procured from ABC CO.,
    Same Packaging Material is Procure by : B1(as per inventory) Procure from MNO CO.,
    now at BOM Level
    finish Product : Z consist of
    A Qty: Each 1
    B Qty: Each 1
    B1 Qty: Each 1 (substitute of B)
    now i want whenever the Job Order is made of Item A then system should ask which item of B to be used. i know substitute item executes when primary item is zero then substitute item is used now i need to use it in different manner system should ask which item to be used.
    is it possible or not...
    with regards,

    You are talking about customization here.
    I dont think Oracle provides this as out of box functionality if you define B1 as substitute of B.
    Oracle Master Scheduling/MRP reports these substitutes on some planning reports, such as the MRP Detail Report. Oracle Work in Process
    does not consider substitute items in its pick lists. Planning bills and model, option class, and planning components cannot have substitute components.
    Hope this helps!

  • OSP Resource is defaulted to the operation in Job Order

    Hi
    The OSP resource is not attached to any of the operation in my routing for an assembly.But When i create a discrete Job Order for that assembly,OSP resource is attached automatically for one of the operation in the Job Order.
    Can someone explain me how this is happening?.From where this OSP resouce is getting attached or derfaulted.
    Regards
    Deepak

    Like Sandeep mentioned it cannot have an OSP resource unless
    1) Routing is referenced with another assembly which has OSP
    2) Has a an alternate routing which has OSP and is used in Job creation
    3) Manually adding OSP resource to a the specific job
    If none of these are true please check for customizations done.

  • Hide parent group if child groups are hidden

    I have SSRS 2005 report.
    Report structure - To show a particular account transactions for every company.
    So user will select account then i have to show all transactions for that account for all companies.
    Parent group - Account
    Child group - Company
    Details section is like below,
    transactions id            transaction type          debit
              credit              difference
    In the groups visibility for compnay group (chile group) i have set condition if diff is zero then hide
    so its hiding child groups. but showing account i.e. parent group. 
    My Report looks like,
    Account : Acc001 (Parent group)
    Company - ABC     (child group)
    transactions id            transaction type          debit  
            credit          
    difference    
    t1                                   type 1                        4
    t2                                   type 2                                    
            4
    total by company            4                    4                   0
    Company - XYZ            (child group)
    transactions id            transaction type          debit  
            credit           difference    
    t3                                   type 1                        100
    t4                                   type 2                                    
             100
                                       total by company           100               100      
             0
    total by account              104             104                 0       
    so i am hiding companies ABC and XYZ but report still show last row total by account. so if abc and xyz are hidden i want to hide that account group (for e.g. Acc001).
    h2007

    Hi h2007,
    According to your description, you have a report with detail rows showing transaction information, child group showing companies, and parent group showing account. Now you want to hide the detail row if the difference(debit-credit)=0, and if the detail row
    is hidden, you want to hide the company as well. Right?
    In Reporting Service, we can’t use a property of a text box as an expression when we use IIF() function to evaluate. But we can put this whole IIF() expression into a IIF() function for another textbox or group to set visibility. We tested your case in our
    local environment. It works fine and completely achieve your goal. Here are steps and screenshots for your reference:
    Create a table as described.
    Right click on any textbox of detail row. Select Properties.
    Click on Visibility tab, put this text into expression:
    =IIF(SUM(Fields!Debit.Value)-SUM(Fields!Credit.Value)=0,true,false)
    Select toggled by its parent group (Company).
    Repeat step2 and step3 for each textbox of detail row.
    Right click on textbox of Company. Select Properties.
    Click on Visibility tab, put this text into expression:
    =IIF(IIF(SUM(Fields!Debit.Value)-SUM(Fields!Credit.Value)=0,true,false),true,false)
    Select toggled by its parent group (Account).
    Right click on textbox of Account. Select Properties.
    Click on Visibility tab, put this text into expression:
    =IIF(IIF(SUM(Fields!Debit.Value)-SUM(Fields!Credit.Value)=0,true,false),true,false)
    Go to Properties window, set InitialToggleState Expanded for Company and Account textbox
    Save and preview.
    Reference:
    Expression Examples (Report Builder and SSRS)(See Properties->Visibility)
    Expression driven visibility in a report
    Best Regards,
    Simon Hou

Maybe you are looking for