PDF not displaying in Web Order Center?

We copied a PROD system into a test system I'll call DDB01.
The SAP logic creates the PDF file in UNIX. ITS gets the file and pits it on the server. We can see both. Via IE6 we cannot display the PDF. However, we can display the PDF using the same IE6 browser in the Production box..
Someone has a Firefly browser that can pull up the PDF from this DDB01 box without any issue. So we know tha Basis and ABAP parts are working OK.
Why won't the browser display the PDF in the new DDB01 box?
Admin permisions?
Any input is helpful.
     Thank-You.
Edited by: Tom M. on Apr 4, 2008 8:54 PM
Edited by: Tom M. on Apr 4, 2008 8:55 PM

Hello Sandy,
Have Basis check you're IIS and ITS accesses, passwords, and config settings ...if you are confident this has nothing to do with you're SAP custom code (if there is any involved).
Please post these as new questions and reward with points if possible.
Good Luck, Tom

Similar Messages

  • Service Orders not displayed in Web Tools

    Hello everyone,
    We are creating Service Type Orders within B1 and they are syncing over to Web Tools just fine, however they are not displayed on the Order History page for the user.  Is that 'as designed'?  I know there is no traditional information that can be displayed about these, but was just curious how these should be viewed if at all within WebTools or if I should create custom development for this.  Any thoughts are greatly appreciated.  FYI, we are using Web Tools 2007 PL 01.
    Thanks,
    Kristen

    Hi Bryce,
    I am talking about orders of type 'Service' versus 'Item'.  So, it is just a Service Order, for a dollar amount to a G/L Account, rather than having a list of items.  These are shown in the Web Tools tables, but are not displayed to the user.  Just curious if they were designed to or not.  Please let me know if that makes sense.
    Thanks,
    Kristen

  • Target costs not displayed in process order

    Hi,
    We have set up a small PI scenario. The issue we are facing is that the target costs are not displayed in the order. Actual costs appear after confirmation, but target costs appear as zero.
    We have maintianed cost relevancy in work centers, defined valid activity types, maintianed price in material master for all components and also run the standard cost estimate and released it.
    Please let us know what we are missing and why this error could be happening?
    Thanks in advance,
    Ashok

    Target costs are populated when you do the goods receipt. System will search for the released standard cost estimate and then apply that for each material component. If these 2 conditions are passed, then you will get target cost in order,
    You need to define the following,
    1. Variance Key - Transaction "OKV1"
    2. Assign that to Plant using "OKVW"
    3. Define Variance Variant using "OKVG"
    4. Define Valuation variant for WIP/Scrap calculation using "SPRO"
    5. Define target cost version by assiging sl no 3 & 4 and also how the cost calculation should be used.
    Once this activities are completed, execute production/process order and then after goods movement and some confirmations process Variance using "KKS2" as a period end activities.
    Edited by: sarin toms on Dec 2, 2008 2:26 PM

  • IPhoto event icons not displaying in chronological order. How do I fix?

    iPhoto event icons not displaying in chronological order. How do I fix?

    Have you explored the options under the View -> Sort Events menu?
    Regards
    TD

  • Safari not displaying some web pages properly why?

    I have been finding of late that safari does not display certain web pages properly. i.e.: text overlaps other text  and is not formatted properly. This seems to have become more common lately. Even Apple's own apple info page does not display properly. Could this be a setting in safari that I have messed up somehow?

    Go step by step and test.
    1. Delete Cookies
        Safari > Preferences > Privacy > Cookies and other website data:
        Click the “Details” button.
        Remove all cookies except from Apple, your internet service provider and banks.
    2. Safari > Preferences > Extensions
        Turn off Extensions if any and launch Safari again to test.
        Turn on those one by one and test.
    3. Delete Caches.db
        Close all windows and quit all applications.
        Hold "option" key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Caches > com.apple.Safari > Caches.db
        Right click the Caches.db file and select "Move To Trash.
        Close windows and relaunch Safari.
    4. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    5. Temporarily  turn off  Safari iCloud sync and test.
         System Preferences > iCloud
         Uncheck the box beside “Safari” and test.

  • HT5364 Safari is not displaying the web page content & Crashes on clicking Security Tab in Preferences!

    I have Mac 10.8.4 with Safari 6.0.5.
    Safari is not displaying the web content but images on the web page are being displayed.
    Although the webpage is loaded, but nothing is shown else than Images. When I hover the mouse on the blank webpage shown, the cursor changes on the links on the web page.
    I tried resetting the preferences from the menu as well as deleting the Preferences of Safari from ~/Library/Preferences/ but nothing helped.
    When I open Preferences of Safari & click on Security tab, It Crashes!!
    Thanks,
    Shubhi

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • The Wireless Network tile is not displayed in Windows Mobility Center

    In my Vista X64 Enterprise that besides this behavior runs perfect i lose the The Wireless Network tile, Microsoft has even a KB about this see http://support.microsoft.com/kb/934555
    +The Wireless Network tile is not displayed in Windows Mobility Center on mobile PC that is running Windows Vista+
    Point is that i have the latest drivers (from Windows Update) on my MBP for my AR5008X and i installed the lastest bootcamp update (2.1) On a Fresh Vista installation the tile works for a day and then it's gone, it shouldn't disappear.
    How can i recover this tile, i turn of wireless often so i need this option!!?
    Message was edited by: piojo

    Nobody has the issue that when press Windows X (to get the mobility center) finding that the Wireless TILE is missing?

  • Goods issue document is not displaying in production order

    Hi Gurus, I am having problem That when I am doing goods issue in MB1A t code the document is posting but it is not displaying in production order.but when I am doing same goods issue in MIGO the document is displaying in Production order.when I am doing same goods issue in another plant with MB1A the document is showing.so where is the problem??is there any setting with plant and T code combination??what exactly is the error??why it is not showing in particular t code in particular plant.Please guide me.
    Thanks in Advance.

    Hi,
    Check in transaction OPL8 for the combination of plant and order type..is the below indicator are activated or not...
    Thanks
    Kumar

  • WAD: Push button not displaying some Web Items

    Hi All,
    I have a web template 7.x in which there is a push button for "Export to PDF". There are some changes carried out to this web template, to include one radio button web item. My requirement is to display this Web Item on the export to PDF page.
    I have included this radio button web item in "Export to PDF" button list. However still it is not displayed on Export to PDF page.
    Is there any other setting which i am missing?
    Appreciate your quick response.
    Thanks.

    Hi Samruddhi,
    As per SAP Note 1069368 which talks about the limitations of Export to PDF functionality in WAD 7, the following webitems alone are supported on Export to PDF:-
    Supported Web items
    Analysis item
    Report item (see also the section 'Web application export with report items')
    Chart item
    Map item
    Information item
    Text item
    List of conditions
    List of exceptions
    Images (only from the MIME repository, see Note 484390)
    Thus Radio Button cannot be included in the exported PDF.
    --Priya

  • Error raised using 'CRM_MESSAGE_COLLECT' not displayed in Web UI

    Hello,
    I have implemented the badi CRM_ORDERADM_H_BADI and based on certain conditions i raise an exception and display the error message using function module 'CRM_MESSAGE_COLLECT'. The application log is populated with the error message and I am able to see the error message in SAP GUI . However when the same transaction is triggered via WebUI , even thought the exception is raised , the error message is not displayed.
    I know i can use the method ADD_MESSAGE of the class CL_CRM_GENIL_GLOBAL_MESS_CONT if i want the error message to be displayed in Web UI .
    However I want the message to be displayed either if the transaction is run from the SAP GUI or web UI .
    Have anyone come across the similar situation , is there something I am missing.
    Thanks & Regards ,
    Sriram.

    Hello Arun ,
         I got the solution . The error message was raised properly . The problem is  message filter at every view or viewset of a component is actually switched off by default.With standard components the filter gets activated at runtime if the component controller contains a BOL entity.
    In our case , since it was a custom component with no BOL entity the filter was switched off and hence the messages from the application level were not read.
    Therefore we redefined the filter method IF_BSP_WD_STATE_CONTEXT~GET_MESSAGE_FILTER at the view/viewset level and turned on the filter by default.hence even if the component does not return an entity the message filter gets activated.
    Thanks for your inputs.
    Thanks & Regards,
    Sriram

  • List of values is not displayed in web inteligence report

    I created a web inteligence report and put into my favourite folder. The report consist of a selectable list of values in a prompt but it does not appear in my favourites folder.
    The users with administrator rights that copied this report into their own favourites folder are able to see the list of values in the prompt.
    It seemed that the list of values does not display in the prompt when non administrator rights opened this report in their own favourites folder.
    Anyone can figure out how to set the access rights so that non administrator can see the list of values when the web inteligence report is opened in their own folder.
    I am using Business Objects XI 3.1 ..

    SOLVED
         CMC -> Connections
    -     Right click connection name, Click u201CTools > Check Relationshipu201D
    -     In u201CQuery Resultsu201D, Right click Connections, Click u201CUser Securityu201D
    -     Assign Security for u201CEveryoneu201D
    -     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
    -     Assign u201CView on Demandu201D
         CMC -> Universes
    -     Right click u201CUniversesu201D folder, click u201CPropertiesu201D
    -     Under u201CUser Securityu201D, click Everyone and assign security
    -     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
    -     Assign u201CView on Demandu201D

  • Header condition type value not displayed in sales order output

    Hi gurus,
    I have observed a strange issue regarding a header condition in a sales order.
    we have a set up like following:
    1. If the Header condition XXXX is used in sales Order then this value should be printed on sales order output.
    2. If the Header condition mentioned in above point is not maintained in sales order it should print the total price of all line items.
    Though i have maintained the header condition value in Sales Order Header its not displayed in SO output.
    That is , I have a sales order and it has one HEADER condition type entered with 3500 USD.
    In fact this value is used for some business purpose and is being printed on the sales order output for a specific output type.
    But where as in a sales order this header condition value is not getting printed on the output though I am using same data as of the sales order which is having the header condition value printed on its output.
    According to business,we must have the header condition value printed on  sales Order output.
    Please suggest how to proceed.
    Thanks in advance.

    Not sure if you are using costom smartform to print invoice, if yes then ask developer to debug and find the root cause and fix it.
    You might need to give him condition when it shuld be printed and when not.
    You can take reference of another output type for which it is printing

  • Condition value is not displaying in sales order

    Hi Friends,
    when i am creating sales order, condition type(JEXP,JECP,JA1X..) is displaying in cond.type column and percentage(14%,2%,1%) is displaying in amount column and
    the condition value is not displaying in cond. value column in conitions tab of  sales order.
    In analysis it is showing as condition record found...
    please help me...
    with regards

    Hi,
    can it be that you have a problem with units of measure? Often, if there is no value in Condition value, the problem is in the master data of material. Did you use standard schema? If you not, have you tried it with standard schema? What is your value under "per" and "UoM"?
    Regards Thomas

  • Pdf not displayed correctly in preview

    We have a new A) scanner (colortrac Ci40) and when we scan a pdf it is displayed in preview as if it is all wrinkled up.
    Only in prewiew and if imorted in vectorworks. (on both OSX 10.5 and 10.6)
    The same problem appears on a iPad.
    It is not displayed correctly.
    In all other programms I tried it is displayed properly.
    We also have a small a4/a3 scanner from konica minolta and these scans display corectly in preview.
    Is this only a preview problem and should I ignore it?

    Hi there,
    I have a very similar problem: a number of pdf files that I can see perfectly well in Safari/GoogleChrome do NOT show correctly in Preview or ANY iPad app I have (Notability, Adobe, PDF Expertm iAnnotate, Dropbox etc.).
    The problem is that punctuation -- with the expection of periods or bolded text -- does not show properly. For example, commas and quotation marks to not show, and some numbers to not show.
    Moreover, once I have annotated/viewed the problematic file on the IPad and resync to dropbox to view on Mac vis Adobe (which I do with most pdf files with no problems), I get an error message upon reopening the pdf file saying "Cannot extract the embedded font 'FAFWQV+--unknown-2--'. Some characters may not display or print correctly." (the 'quoted' text changes each time). When opening in Preview, no error message appears, though the fole is still lacking punctuation etc.
    Here is a link to one problematic pdf:http://niis.cass.cn/upload/2012/12/d20121201200145301.pdf
    NB: the file is in Mandarin, however I can successfully open/edit/annotate/sync other pdfs using Mandarin font so I'm not sure if the language is related to the problem.
    I would be extremely grateful for some help with this please!
    Thanks!

  • Audiobooks are not displaying in numerical order on iphone. all mixed up.

    audio book contents which are in order from 1 to whatever number in itunes are now displaying in different orders on iphone now. how do I fix this? they are already in the order I want in itunes but not on the iphone

    I created a playlist (not a smart playlist) for the audiobooks I transfer to the iPod and they're STILL playing as if I had shuffle mode on. I've reported this as a bug, but who knows when Apple will get around to fixing it!
    I was hoping someone would have come up with a workaround but nothing works.

Maybe you are looking for