Play ends when song ends - Shuffle and Continuous Play not working

I'm pretty sure I did not install an update prior to this starting. Since the problem began, however, I uninstalled iTunes and reinstalled to see if that would solve the problem and it did not.
I typically play songs, on shuffle, from my main library. When I open iTunes shuffle is automatically selected and I click on the play button to choose a random song. Since this past thursday when I click the play button nothing happens. I have to manually choose a song to play. Once the song has ended iTunes does not choose another song (if on shuffle) nor does it play the proceeding song on the list (if on normal play). In order to play another song I have to choose another. Once that song ends I have to select another and so on.
I have checked the settings and I don't see anything that could be effecting the way iTunes plays the songs.

*Figured it out*
Somehow, all of my songs where not checked....

Similar Messages

  • Shuffle and continuous play

    I obviously don't understand how ATV2 using Home sharing works.  I have my ATV2 setup to share my iMac's iTunes Library. It shows up fine on the ATV2. What I have not been able to figure out is 2 things:
    1. How do I get a the ATV2 to continuous play everything in an album?  For the life of me Ican't figure it out?
    2. How do I use "Shuffle"  it appears to always be on (arrows are crossed?) Can you turn it off?   When I select shuffle withthe remote it starts to play one song but then stops (even though are more songs in the album, genre,etc.)  What am I doing wrong?
    I'm feeling pretty dumb about this thing?

    Got it. Ihad unchecked all the Holiday Music so it wouldn't sync to my iPhone.  re-checked them and it's all good.

  • Play only one song in itunes, and stop playing completely?

    I´m a sound technician and I have to play sounds on cue for a performance. I recently updated to itunes 11 cause I was having trouble with ten. In itunes ten there was the ¨check¨ feature where I could play all the songs I want to play in a library, uncheck them and then I could click on it, it would play, and as soon as it was done, playing would stop and it wouldn´t skip to the next track or repeat the current track, it would just stop. I don´t see that anymore in itunes 11. Can anyone help my, I´m a little worried here.

    Op wait no, it´s there... Never mind. Wish I knew how to delete questions.

  • MBP will not register with iCloud servers (and most iCloud features + Handoff and Continuity do not work)

    Hi all,
    I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
    I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
    For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
    Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
    I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
    Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
    The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
    Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
    I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
    Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
    Cheers and thanks in advance.

    Needed to add some clarification here:
    iCloud shows me as signed in, but Calendars are NOT checked
    Internet Accounts shows Calendars as syncing

  • Edit and Continue does not work for VB Linked Files

    Hi all,It is not possible to modify source code in the files linked to a VB.NET project when the program is running (debug mode), even though Edit and Continue is enabled, along with full debug info and no optimizations is enabled. Files that are physically present in the project's hierarchy are editable without ptoblems.hierarchy example:FolderRoot\FolderRoot\Folder1: Linked Module1FolderRoot\FolderProject : Internal Forms and Modules(The Linked Module1 is external to main project but added as link at project)I found no solution for this problem.Anyone help me, please
    RegardsFilSky

    The main reason for using a linked file is for sharing. With that said your best option is to create a class project and place that file into the class project and reference this class project in any project that requires the code. One caveat, if the shared
    file is a code module add Public in front of Module, otherwise it will not be visible outside of the class project.
    So for a code module we start with
    Module Module1
    ' Your code is here
    End Module
    Add Public
    Public Module Module1
    ' Your code is here
    End Module
    Nothing needs to be done for classes.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

  • When dialing, 7, 8 and 9 keys not working.

    In some applications, there is a row of the touch screen that is not working. When I am dialing a phone number, the 7, 8, and 9 keys will not work, it goes to the row above or below it. However, when I am choosing from a list, like in Settings, I do not notice any problems. I have already restored in iTunes. What else can I do?

    Whenever i try to restore my phone on itunes, it says i need to turn off "find my iPhone" but in order to do that i have to unlock my phone, which i obviously can't

  • AE CS6 Track Mattes and Continuous Rasterising not working

    Hello,
    I'm having an issue with After Effects CS6. I'm using some Illustrator files in a comp. Within this comp I have used Track Mattes to mask off certain objects. When I put the comp into my master comp and turn on Continuous Rasterisation
    the track mattes seem to slip out of place. None of the layers within the comp or the master comp are 3D layers so this isn't the issue. The Track Mattes are Illustrator files as are the objects being matted.
    This is the result in the master comp.
    These are the layers in the Master comp.
    And these are the layers within the comp.
    Thanks for your help

    It works as designed. Enabling CR changes the order in which items are evaluated (there's some blurb on that in the online help somewhere and a link to a more detailed article from the Meyer books), including mattes and masks plus your parenting will influence transform positions as well. You will have to forego CR or restructure your project.
    Mylenium

  • When i compare multiple attribute it is not working in MDX query

    Hi All,
    i have create a measuer please see below code,
    MEMBER [Measures].[a] as
    case when
    [DimProduct].[Portfolio].CURRENTMEMBER.MEMBERVALUE="Fungicide"  //Working
    then "1"
    when [DimProduct].[Portfolio].CURRENTMEMBER.MEMBERVALUE="Herbicide"  //Working
    then "1"
    when  [DimProduct].[Portfolio].CURRENTMEMBER.MEMBERVALUE="Seed" //Working
    then "3"
    when ([DimProduct].[Portfolio].CURRENTMEMBER.MEMBERVALUE="Fungicide" //Not working
    and [DimProduct].[Portfolio].CURRENTMEMBER.MEMBERVALUE="Seed")
    then "1and2"
    when  ([DimProduct].[Portfolio].CURRENTMEMBER.MEMBERVALUE="Fungicide"  //Not Working
    and [DimProduct].[Portfolio].CURRENTMEMBER.MEMBERVALUE="Seed"  )
    then "1and3"
    end
    when i compare multiple attribute it is not working.

    Hi manishcal16PPS,
    According to your description, your calculated measure is not working when two when statement together. Right?
    In this scenario, since the conditions in your case when statement are exclusive, you should use OR instead of AND operator.
    when  ([DimProduct].[Portfolio].CURRENTMEMBER.MEMBERVALUE="Fungicide"  
    OR
    [DimProduct].[Portfolio].CURRENTMEMBER.MEMBERVALUE="Seed"  )
    then "1and3"
    Best Regards,
    Simon Hou
    TechNet Community Support

  • My iPod touch is stuck on one song in my play list when in the shuffle mode.  How do I fix this to shuffle through all the songs in that playlist?

    My iPod touch is stuck on one song in my play list when in the shuffle mode.  How do I fix this to shuffle through all the songs in that playlist?

    If you go to the Now Playing screen, the Repeat control is the the arrowed racetrack icon on the left side right below the scrubber bar. Tap the icon to change. It is white when Repeat is off.

  • My call will not end when pushing end sign even when shut down and restarted.  any ideas?

    call will not end when pushing end sign even when shut down and restarted.  any ideas?

    Sounds like a major hardware problem.
    If no change after restoring your iPhone as a new iPhone or not from your iPhone's backup, there is a hardware problem.

  • AE CS5 (10.0.1.19) Ram Preview - Audio stops and continue playing randomly

    I already reported this issue to Adobe as a BUG but I want to ask here if somebody else have this problem or can confirm it.
    Audio breaks/stops and continue playing randomly when 'Ram Previewing'
    It happens mostly when the RAM is fully filled up with image cache files! When the Ram is not filled up totally with image cache files it happens rarely!
    Steps to reproduce BUG / issue:
    1. create a new composition with a length of for example 5 minutes.
    2. create a new solid with size of 50x50 pixel and animate the position of the solid for a very long time so when ram previewing the whole ram/memory gets filled up with different image cache data (this is very important!). Alternatively you could use a long video file to fill up the RAM completely.
    3. import a wave file .wav 16bit 48khz uncompressed which is very long for example 5 minutes.
    4. insert the wave file in the earlier created composition which contain the animated solid or video file.
    5. Set the work area bar (preview range) for the whole composition.
    'Ram Preview' the composition until the whole RAM/memory is filled up with image data.
    AE has to stop rendering because there is no more space available in RAM.
    make sure 'from current time' checkbox is off.
    6. listen to the audio which stops playing randomly for about 1-2 seconds and comes back and continues playing (***BUG***)
    7. Now set the right handle of the composition work area bar (preview range) to less then the maximum RAM size
    (less then the green cache indicator on the right side)
    8. "Purge image caches" or "Purge All"
    9. Ram preview the now smaller work area
    10. listen to the audio. The audio breaks are gone! (***Workaround***)
    Additional information:
    I have the latest After Effects CS5 update installed (10.0.1.19)
    This behavior is tested with different audio drivers inside After Effects CS5 (After Effects WDM Sound, Generic Low Latency ASIO Driver,  ASIO DirectX Full Duplex Driver)
    I also tried different Sample Sizes Buffers (alternatively to the default 2048 samples) but without success.
    Reducing the amount of RAM which After Effects can access didn't solve the problem!
    System:
    Win7 64bit all latest Updates, 8GB RAM, CPU: intel Core 2 Extreme QX9300, nVidia Quadro FX 2700M, IDT High Definition Audio Driver v6.10.0.6227
    There is no driver problem on my system because After Effects CS3 & CS4, Premiere & Soundbooth CS3 CS4 CS5 have no audio problems!
    I have lots of other professional audio software like Steinberg Cubase 5.... on the same system and they all work fine.
    I also turned off AVG Anitivirus and Windows firewall for testing without success.
    AdobeQT32Server.exe, dynamiclinkmanager.exe, PProHeadless.exe, afterfx.exe do not get blocked by firewall they have full permission.
    The CS5 Production Premium installation went fine and without errors and antivirus protection was turned off for the installation.
    Any help would be nice!
    Felix

    Yep, I agree with craulmedia....
    It's 1 month ago after my initial post and no valuable feedback from Adobe although I filled out the bug report in addition to this post and provide my email for further information.
    The only reason for upgrading from CS4 -> CS5 production suite was the use of all my 8GB RAM in AE and now AE can use it but when it's using it the audio have issues.
    CS5 is on the market for nearly a year and still have such essential issues... And my fear rises there will be no valuable update fixing these issues but instead Adobe forces me to upgrade later this year to CS6 in hope something change...
    I have had support request for different Adobe products in the past including telephone support, web support via Adobe ID... none with success the web support answered my request 3 weeks later with the message they will look into it... time went by and in the end the result was "Yes we know it's a known bug" the bug did not get fixed for that CS version. it even exists in the next major CS release! (talking about EncoreDVD here). Once the web support answered weeks later when I was in holidays and after some days I was not able to respond they closed my case. I reopened the case but never got an answer! Telephone support is nearly waste of time because in 95% of all cases it does not help to reinstall the whole operating system and talking to people who know less about computers in general or Adobe products then my mom - it's a waste of time.
    I don't want to blame here anybody for things happend in the past I just want to point out that this time I choose an other support channel (bug report and forum post) but it seems that this support channel is also a waste of time after 1 month with no valueable feedback!
    I bumped up this post 2 times and thanks to craulmedia for the third time.
    And now here is my fourth time *BUMP*
    All I got so far is: "I saw your bug report it's in the queue"
    Is it still in the queue? which queue nr. does it have? how long will it take to get any answer? is it reproducible? Is it confirmed as a known bug by Adobe? Is Adobe working on a fix? When will this fix be available? Is the fix provided in form of an update or in the next major release?
    OK, I know this is a user to user forum and Adobe people only stop by in their free time and there is no guarantee for any real support.
    But it started out so good in the first time...
    Last 2 things I want to add here:
    1. Why should I provide my email in the bug report? Sure so Adobe can get back to me for further information... but wouldn't it be nice if Adobe would be so kind to give some status report to that given email as a small present for the enthusiastic beta testers ?
    2. please Adobe take a look at www.uservoice.com already Autodesk started to move there with 3ds Max.

  • Script single button to play frames, then skip some, and continue play?

    Just as the topic says, I want to script a button to go to
    and play through a motion tween, but then skip some frames to then
    play another motion tween all in one button press. For example,
    play frame 1 which plays the tween and ends at frame 10 (I have
    that part down fine) but then for it to skip ahead to continue to
    play frame 20 and then of course stop once it finishes that motion
    tween.
    Tried a few searches but its too many words to explain so I
    wasnt finding anything. Its probably a simple command im just not
    familiar with yet. Can anyone help?

    I probably should have been more specific. I cant add
    anything to the timeline because I have multiple buttons using the
    first tween, which is a fade out. Thats why I need a script to add
    to each button only to play through that first common tween, and
    then skip to play an individual tween set for each button. Like
    button 1 goes through the first common tween, a fade out (plays
    frames 41 - 53) and its individual tween is frames 54 - 66. This
    works fine of course because the tweens are next to each other.
    Button 2's individual tween starts on frame 67, so it needs to play
    through the common tween fade (41 - 53) skip Button 1's frames, and
    continue play on 67. These buttons are located on frame 1 (main
    menu) so is it even possible to script a button to do such a thing?
    I figured there would be but nothing im trying or seeing online is
    working. Heh... does this make sense? :o
    The only other way I know it will work is if I copy and paste
    all the information in the layers before each section but that
    causes me to have to push a lot of information further down the
    timeline, kinda making a big mess and causing me to rescript all
    frames there.

  • After playing 60-70 songs on shuffle battery life is almost all gone.

    Well the subject says everything...
    Basically after I play 60-70 songs on shuffle, the battery life is almost gone. (After being fully charged) I don`t know if this is part of the reason why it only plays that many songs, but I do turn my ipod on an off a few times. (About 4-5 times?) But I don`t think that`s a good enough reason for the battery to be so low after playing only about 3-4 hours. I don`t have any songs that go over 5 minutes and I don`t watch videos or put on the slideshow while playing music. And the only times I touch the click wheel is when I want to raise/lower the volume or skip to the next song. So I don`t know why it only plays for such a short time. Does anybody know why it`s doing that? And is there any way I can fix this?
      Windows XP  

    Try just letting your ipod play one song over and over, and see how long it lasts. If it still has the same problem, get the battery replaced.
    -Taps-

  • Adobe Photoshop Elements 11 has ended up in my thrash and now will not open i transferred it back to

    Adobe Photoshop Elements 11 has ended up in my thrash and now will not open i transferred it back to applications but it will not open it says to re-install but I have lost the cd/dvd I do have the package with the serial no. can you please please help me

    You have a heap of work to do before you can reinstall it. NEVER try to get rid of PSE by putting it in the trash. You must use the uninstaller. By attempting to trash it you just made a big old mess for yourself.
    You will need to download and run this:
    http://www.adobe.com/support/contact/cs5clean.html
    Then go through your hard drive and manually dig out and trash all the bits you can find. Pay special attention to the library at the top of your hard drive>Application Support>Adobe.
    Once you successfully get that cleaned up, you can try reinstalling.
    You can download PSE 11 here, but you must follow the Very Important Instructions exactly, even when they don't seem to make much sense, or it won't work:
    http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

  • TS1362 I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!

    I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!  I NEED HELP OR MY MONEY BACK NOW!

    There seems to be an occasional issue with downloads from the store. They prompt for authorization when they are in fact corrupt/incomplete in some fashion. Try deleting the problem tracks (do not hide from iTunes in the cloud), close iTunes and reopen, go to iTunes Store > Qucklinks > Purchased > Music > Not on this computer. Select a few tracks to download then click the icon that appears at the top-right of the iTunes window.. Untick the box that reads Allow simultaneous downloads. Proceed with the rest of your eligible purchases.
    If you still have a problem use the Report a problem links in your account history to contact the iTunes Store support team.
    tt2

Maybe you are looking for

  • Can't open new windows in Safari 5.1.2 for Snow Leopard

    I have downloaded the 10.6.8 combo update and of course installed the new version of Safari.  Now I cannot open a new window (whether it is a link or if I do apple-n on the keyboard).  I must be missing something here that must be very simple to fix

  • Sale Bill

    Hi     Excisable Raw Material has been purchased , now client wants to return some material back to the supplier . Supplier wants Sale Bill not Purchase Return (Debit/Credit Memo) . How to handle this and how it should hit Raw Material Account if Sal

  • Getting error while connect to Site Studio

    Hi All, While i am connecting UCM from Site Studio, I'm getting error like *"the Site Studio component is from an older version of the product"*. Please give me advise to solve this problem.

  • Why can't i position this object??

    Hi All. I'm having aslight problem. I'm trying to create a sphere and position it somewhere in my scene but everytime i run the code it automatically positions it back at (0,0,0). Anyone got any ideas. The code's below. Thanks a lot. Java_chic. java.

  • Problem with Total Button with DroupDown list

    Hi All, here i have one Standard Report witch TCode is J3RFPDE . After Execute this program in output i get many button and in this button "TOTAL SIGN BUTTON"  has DroupDown list. So if i want thisTotal  Dropdown Button in my Report so is ti possible