Pricing Procedure is required for Job work

Hi every one,
Job Work : Pricing Procedure
Excise Duties : BEDAEDSEDEdu.CESSHigher Edu.CESS
Excise Duties will be calculated based on { Job work Charges + Insurance Charges + Add. Processing Charges+ Customer Grey Material value (assessable Value ) }
Broker Commission : Brokerage will be calculated based on { Job work Charges + Insurance Charges + Add. Processing Charges } and also this value should add to any other values
Rebate : That is Qty Rebate and also that value also not added to any other value
VAT : { Job work Charges + Insurance Charges + Add. Processing Charges+ Customer Grey Material value (assessable Value ) + ED }
And also we are using TAXINN tax procedure
For Commission : Condition type are ZCOM,ZCO1,ZCO2
For Rebate : Condition Type ZO02
For Insurance Charges condition Type is ZINS
For Add.processing Charges condtion type is ZAPC
Kindly Give me the solution how to map into SAP that pricing Structure
Regards,
Prasanna

Hi,
The following is the solution
10 .Job Work Charges or Processing Charges ZJOB : per 1 meter = 25.50 Rs (Mandatory)
20. Insurance Charges ZINS : per 1 meter = 0.75 Rs (Mandatory)
30. Additional Processing Charges ZAPC : Per 1 meter = 0.25 Rs (Optional means Manual Entry )
35. Job work + Insurance + Add.processing charges = from 10 , To 30
37. Rebate Basis
40. Customer Assessable value JASS : per 1 meter = 45.50 Rs ( they want to enter Customer grey value at the time Excise Invoice and i m not sure how to map into SAP in which transaction they have to maintain the customer grey value )
50. total   value (Basic price for Excise Calculation)   = from 35 To 40
60 . BED Duty JEXP (Percentage) = from 50
70. AED Duty JEAP (Percentage) = from 50
80 . SED Duty JESP (Percentage) = from 50
90. Edu .cess Duty JECS (percentage ) = From 60
100. Higher Edu Cess Duty JHES (percentage ) = From 60 ( I created new condition type bcoz i couldn't able find out )
110. Total ED = From 60 , To 109
120. Total Vale (Including Excise Duties) = From 110, To 119
125. Total   value (Basic price for Excise Calculation) From 50
130 . Total Charges W/O VAT   From 120 , To 129
135. JLST = From 130
137 JCST = From 130
138. Gross Value = From 130, To 137
140. Material Rebate ZO02 = from 37 ( this value is not add to any other value ) (Statistical )
150 . Commission ZCOM = From 35 ( This value also not add to any other value ) (Statistical )
160. Commission ZCO1 = From 35 ( This value also not add to any other value) (Statistical )
Regards,
Prasanna
Edited by: prasanna_sap on Aug 14, 2011 12:37 PM
Edited by: prasanna_sap on Aug 14, 2011 12:45 PM

Similar Messages

Machine part (From the Plant sending )outside for job work

Hi
i want to send a machine part present in working location (but not a stock item) outside the plant for job work and that part is excisable material.
How can i send this to vendor or
is there any procedure for this ,inform me.
Regords
manju

I want to send a machine part present in working location (but not a stock item) outside the plant for job work and that part is excisable material.
How can i send this to vendor
Hai,
1.Do the MB1A with 202 mvt type to get back the material from the Work location Cost center to Storage location.
2.Create the Subcontracting PO without payment of excise duty ie., with subcontracting challan. Here the components provided to the vendor & material at item overview should be the same.
3.Do the MB1B - 541 Mvt type transfer posting.
4.Create the subcontracting challan w r t material doc by J1IF01
5.Do the MIGO for SC PO.
6.Reconcile the SC Challan.
7.If the qty is fully reconciled then you can complete the challan.
8.Do the LIV for SC PO.
9.Do the MB1A with 201 MVT type to issue the material to the Work location.

Ssinging service tax assignment to customer for job work taxinn

dear sir
assinging service tax assignment to customer for job work taxinn,procedure ,kindly give me step by step procedure
thanks

Hi,
Enter the correct tax code or maintain the Tax code VR in the transaction code FTXP.
Regards,
Manish

Need ED for job work material

Dear Sir,
We have a scenario like, we are sending material to Vendor for job work and he is sending back the same material without adding any materials in it but he is collecting Excise Duty as well as service charge. Now for service charge I will rise service P.O and for excise duty I will rise ordinary P.O. but at the time of GRN and MIRO transaction material value should not flow, only Excise duty to be posted in MRO transaction. Please provide your suggestions.
Thanks,
Manoj

Hi,
Why is it necessary for you to pay excise duty. Subcontracting is exempt from Excise duty if the raw materials have been converted to finish materials and the same returned within 180 days. This requires the creation of a Subcontracting challan.
The steps are as follows:
ME21N- Create Subcontracting PO with Item category as "L" and provide BOM inside.
MB1B - Transfer posting components with respect to PO.
J1IF01 - Create Subcontracting Challan
MIGO - Goods Receipt of Finish Material in 101 and consumption of components in 543 movement type.
J1IFQ - Reconciliation of Challan.
J1IF13 - Completion of Challan.
J1IFR - Annexure IV Report
MIRO - Invoice for conversion charges(Service charges).
Regards
Binoy

Order for job work

Sap Guru
I want to know is there any report to display order where customer has given that order for job work.

I dont know whether you are using a separate sale document type for Job Work orders. We do so and hence it is possible to generate a report. Another differentiating factor will be requirements type or item category in Job Work orders. Again you need to check whether system is configured that way. If so, then you can goto SE16 and give VBAP to check the job work orders.
Regards,
GSL.

Customer goods receipt for Job work

Dear Experts:
1.Material received from customer with challan for job work.
How to handle this scenario.
Regards,
Sridhar.N

Hi,
You could use serial number concept or bacth managment here to separate within the material code.
Regards

Good receipt for job work from other plant

Dear Experts:
1.Material Received from Other Plant for job work with challan and how to bring the Material into Stock at receiving plant.
The same material stock number available in this plant also.
Regards,
Sridhar.N

Hi,
You could use serial number concept or bacth managment here to separate within the material code.
Regards

Solution for job work material

Dear All,
Please provide me what is the best solution or procudure for job work material (for production), also confirm me what effect of component price in Bom.
Thanks

Hi vivek!
Thanks for your reply..
But what is the need of creating PO's.. I am simply receiving the material(non-valuated) form the customer and do some service in it and send it back to him.. I will process this via sales.. But my question is whether should i create a material master for each time i receive a new material since its one time job and weekly we r receiving around 100 new materials.
Thanks,
Raj.

Item for job work/repair

Hi
After receiving the items, i want to send it for job work or for repair back to vendor, as there is no such form for this i've created new warehouse of REPAIR name and sends such repairable items thro invetory transaction so that if i want to check the stock of such items i could check it easily through that warehouse.
is it wise to opt this way or there is any other solution for that.

Hi,
Check these threads :
Handling "Repair" of Items
/message/6015394#6015394 [original link is broken]
Check if it helps.
Regards,
Jitin

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

Thanks for the reply.
But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same?

Complex alternative qualifications/requirements for job/position level

Dear collegues,
I've faced a problem when assigning job qualifications.
The Client (State Authority) has experience requirements for jobs/positions something like this:
Ex. for Committee Director position requirements are:
5 years of general experience, including 1 year in state authorities OR
4 years of general experience, including 1 year in state authorities after finishing government study programme - Western Bachelors degree OR
3 years of general experience, including 1 year in state authorities after finishing government study programme - Western Masters degree OR
3 years of experience in State Authorities OR
6 years of general experience, including 2 years on Executive positions OR
3 years of general experience if having Doctors degree
So, we have 6 alternative bundles of requirements for the position, which contain several requirements in itself.
Is there a possibility to make qualification blocks alternative?
Or any other suggestions please?
It broke my brain today))
thank you,
best regards,
Yevgeniy

Thanks for the confirmation Yevgeniy.
First thing that organization has to plan is: alternative qualification mapping for scales which can be easily read and considered for all process front like Recruitment, Hiring, building Competency Mapping, Performance Management, and Learning Management. This requires a complete change management process as to how to manage Job Family Architecture would fit the organization and it's organizational structure based on Position and Qualification.
For all the alternate qualifications they have; you need to simply build a scale as Option 1, Option 2, Option 3, etc and each position qualification description will be held in position description rather in Personnel Development.
Therefore, QK would be called as Experience and Q would be Relevant Experience with Scales attached as Option 1, Option 2, Option 3, Option N... etc. I still don't know what Option 1, Option 2... Option N... could be described as and you can write small description for each options as well (SuccessFactors have scales which can hold large texts as well, but in SAP the text width in scale level is limited).
If you patch up with client on this approach, they can help you out. We have succeeded this approach to one of my engagement as Qualification via Job / Position Architecture.
The advantage of this approach is: Only the scale is configurable, the rest is masters which can be changed or overlooked anytime. With reference to your context, all the data structures should be managed as masters rather custom or configurable as it would lead to inconsistency on a longer run.
Hope this helps. Do let me know if you still need any clarifications. Thanks in advance.
Regards,
Saravana Gopalan
Senior Business Consultant - Human Capital Management
SAP Service Line | Cloud Computing (SuccessFactors / Etc)
E/ [email protected]

GR for job work sales order

Hi all!
We do a mere job work for our customers. We receive the materials from customers, do some work on it and return back the same. For this i have created 2 material codes for finished and raw as non-valuated material(UNBW). Process is like i have created an enquiry(1300003) , created quotation(1400026)based on enquiry, created sales order(1500079) with reference to quotation and tried to receive the raw material in 501 E or 561 E with reference to sales order.
But when i tried to do goods receipt in MB1C (561 E) with reference to a particular sales order number(1500079) system throws me an error as below.
Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 1300003 and item 000010. Therefore, the settlement and possibly inventory management are carried out using the number of the preceding document.
System Response
This entry is not allowed.
Procedure
Enter the document and the item number of the preceding sales document.
System is not accepting the sales order number as reference but its accepting the enquiry number when i do 561 E
How can we solve this issue..
Thanks in advance,
Raj.

Hi,
1. create BOM - Customer materials are raw materials.
2. Create a sales order with header materials .
3. Maintain the pricing according to your requirement.
4. the sales order with create a purchase requisition for the sub materials.
5. based on this create a purchase order. Note create a account assignment for the sales order to puchase order with respect to job work.
6. Do MIGO.
7. Do billing to the customer.
thanks
Kuntla

Customer Standard & returns Process for Job work Scenario issue

Hi,
According to My Job Work Scenarios
Customer will give the Raw material like Grey (Non Valuated material )
Normal Process :
Once we created a sales order for 100 meters , at the time of production completion the finished stock will be increased or decreased like 110 meters or 90 meters
1. At the time Delivery how system will accept over delivery and under delivery . i have seen the 2 fields in customer master where we will we maintain the Percentages how system will determined
2. Billing will be done by based on delivery qty and after that i have to raise the Excise invoice based on billing level
my doubt is how can we know or Track this sale order we delivered qty less or over ? is there any report available in standard SAP ? how to close the sales orders ? is there any mass close of sales orders ?
3. At the time of Excise invoice they want to enter the Assessable manually how to do in SAP ?
Return Process:
1. we will raise the Return Order based on document type RE , but in my case client will take the Return Goods and he will give the price of raw material like Grey how i am going to handle this situation ?
2.How to process the excise related activities what the settings i have to do and what are the t-codes ( I think we can use J1IH ) i have to use
3. What the documents will be generated
Please guide me because i searched in Forum i couldn't able to find out
is there any solution ?
Regards,
Prasanna
Edited by: prasanna_sap on Jul 12, 2011 12:55 PM

My answers are in BOLD. I have done some tests and my advise is based on the tests.
First of all Thanks for Reply Mr.Typewriter,
According to My Job Work Scenarios
Customer will give the Raw material like Grey (Non Valuated material )
Normal Process :
Once we created a sales order for 100 meters , at the time of production completion the finished stock will be increased or decreased like 110 meters or 90 meters
1. At the time Delivery how system will accept over delivery and under delivery . i have seen the 2 fields in customer master where we will we maintain the Percentages how system will determined
Yes you can have limits to over and underdelivery in XD01 or VD51, depending upon either you want to give limits for a customer or for a cust-mat combination
Can you please explain because my doubt is if i entered manually system will accept i want to restrict the end-user like for example he can enter over delivery 10 % and under delivery 5 % where i have to fix those percentage because if i am not fix End-User can enter sometimes over delivery 11 % and under delivery 10 % system will accept i want to restrict that
3 steps -
1. in VD51 create cus-mat info record, go inside the record by double clicking - give Underdelivery % & Overdelivery %, Save.
2. in 0VLP, for your delivery item category, in field "Check Overdelivery" = B (Situation rejected with error)
3. in OVM1, for message VL 064 change to E (error), this is for Underdelivery
Now if sales order is created for 100EA. Underdelivery and Overdelivery = 10%
Then user can NOT create delivery e.g. for 80EA or for 150EA.
I have tested this.
2. Billing will be done by based on delivery qty and after that i have to raise the Excise invoice based on billing level
my doubt is how can we know or Track this sale order we delivered qty less or over ? is there any report available in standard SAP ? how to close the sales orders ? is there any mass close of sales orders ?
In sales order in VA03, item level, Tab Schedule line - there you can see clearly Ordered Quantity and Delivered Quantity
Even if it is Over or under delivery also
Yes, see point 1
The status of the order you can set/configure, if in XD02, in Tab Shipping, field = Partial delivery / item
status can also be configured in VD52, field = Partial delivery / item
This way you do not have to manually close the sales order, even if you have underdelivered. Select the option (A, B,...) which fits your business requirement best.
3. At the time of Excise invoice they want to enter the Assessable manually how to do in SAP ?
what about the solution for this point
I don't know this point's answer
Return Process:
1. we will raise the Return Order based on document type RE , but in my case client will take the Return Goods and he will give the price of raw material like Grey how i am going to handle this situation ?
Explain this more. (what are material you have sent to customer & what material he is wanting to pay for; are they different MMRs?)
Two ways -
One have different cond records with different MMR and prices (if Finished mat = M1, and raw material = M2); in MM01, Tab Sales org 1, you can have Sales Unit changes set.
Second have a different pricing procedure for RE and another for OR.
Customer will give the Grey Material ( Non - Valuated ), we send the finished Material to customer correct , Due to some reason customer return the Finished Goods that time Client will pay the Grey material value
1 Questions -
e.g. Grey mat = M2
Finished goods = M1
Q1. RE order shall have different material #s from sales orders, because RE shall have grey mat. & OR shall have Finished mat. Is that correct?
Then - cond records in VK11 for different materials, for con type PR00 for M1 and M2; this is possible.
2.How to process the excise related activities at the time of returns what the settings i have to do and what are the t-codes ( I think we can use J1IH if yes guide me based on that )
What is the solution for this point
I do not know this answer
3. What the documents will be generated
Are you asking documents to be generated for RE process? Delivery note has to be printed for the warehouse to do GR
I mean at the time returns is there any excise related documents will be updated if yes tell me what are the documents ?
I do not know this answer
Regards,
Prasanna
Edited by: Typewriter on Jul 13, 2011 1:43 AM

SD: Pricing procedure configuration required.

Hi all,
I am not sd consultant but as required , I have to do following work:
Service tax                 - 12%
Edu. Cess on s.t.          -2%
HS Edu cess on s.t.      - 1%
pls help me to configure pricing procedure and condition table and condition type for this.
I will be great full.
Thanks to all
Devendra

Moved from SAP ERP SD Billing to Internationalization and Unicode. Please post all your CIN related queries here.
Coming to your query, if you are not a SD consultant, then it will be very difficult to configure this since for each and every condition type, you need to assign the correct step number and Account Keys. Also, your client are into TAXINJ or TAXINN. Search the forum what is the difference between these two and how to maintain condition record for these. Try on your own and still if somewhere you stuck, post here so that we can assist you.
Please don't expect the entire configuration from SD / CIN perspective which is not encouraged here
G. Lakshmipathi

PRICING Procedure in SAP for an Incomming Sales Order IDOC

Hi Friends,
Here is a situation what we have and what we intend to do.
We would be getting a Sales Order IDOC and when it hits the SAP..it comes with
-Material, Qty and Price per material
-Total Freight
-Total Tax
i.e the Pricing conditions are not maintained in SAP at all..we would just get the IDOC externally and the SAP needs to read the material, Qty at line item,
take the total freight as it comes, and total Tax as it comes in the Idoc.
My thoughts were to have all the Conditons PR00 (ZR00), KF00 (ZF00), UTXJ (ZTXJ) . ZR00 to set as Manual condition. ZF00 as header Freight and Manual condition, ZTXJ as header condition and Manual.
I therefore was trying to figure out the best way to set the pricing procedure.
Please let me know if I am on right track if not which is the way I need to set.
Thank you
Ravi

HI Ravi,
I think your issue is solved now...so for the benefit of SDN members....can you share the solution..as I am also working on the same requirement !!
Thanks in advance
Mayank

Pricing Procedure is required for Job work

Similar Messages

Maybe you are looking for