Problem Bridge / Photoshop CS 2

Kann Dateien aus Bridge heraus über Werkzeuge, Photoshop, Image Processor nicht öffnen. Es scheint, als ob keine Verbindung zu Photoshop bestehen würde. Woran kann es liegen?
Ernst

Problem behoben :-)

Similar Messages

  • Bridge photoshop batch problem

    Hi there,
    After upgrading to Photoshop CS4 from CS3 (new install), I am having a problem with running Photoshop batch from bridge.
    I have actions that work fine when run from Photoshop but fail when run from bridge.
    I don't seem to be able to run any Photoshop actions from bridge without a failure.
    The error messages include:
    "JavaScript code was missing"
    "The command 'Pixel Genius PhotoKit Capture Sharpener Expert' is not currently available"
    As well as other seemingly random "the command .... is not currently available".
    I am running Vista 64 bit.
    If anyone has any ideas - I would appreciate them.
    Thanks,
    Richard.

    Hi there again,
    An update to this problem.
    The problem appears to be with Bridge-Photoshop communication.
    I select images in bridge, choose Tools->Photoshop->Batch.  Photoshop opens and I select the Action to run and click OK.  At this point, if Photoshop had no image already loaded then the Action fails because there is no image, ie. the selected images from Bridge are not opened in Photoshop.  The error messages are consistent with having no image loaded to run the various action tasks on.
    If Photoshop already had an image loaded, then it proceeds to run the Action, once for the number of images I first selected in Bridge, but on the image that was already loaded - not on the images selected in Bridge.
    I have deinstalled and reinstalled Photoshop and all its updates with no change.  Any ideas at all would be appreciated.
    BTW Image Processor works ok when invoked from Bridge.
    Tks,
    Richard.

  • Help with add file name problem with Photoshop CS4

    Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
    Script follows:
    // this script is another variation of the script addTimeStamp.js that is installed with PS7
    //Check if a document is open
    if ( documents.length > 0 )
    var originalRulerUnits = preferences.rulerUnits;
    preferences.rulerUnits = Units.INCHES;
    try
    var docRef = activeDocument;
    // Create a text layer at the front
    var myLayerRef = docRef.artLayers.add();
    myLayerRef.kind = LayerKind.TEXT;
    myLayerRef.name = "Filename";
    var myTextRef = myLayerRef.textItem;
    //Set your parameters below this line
    //If you wish to show the file extension, change the n to y in the line below, if not use n.
    var ShowExtension = "n";
    // Insert any text to appear before the filename, such as your name and copyright info between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextBefore = "Lower© ";
    // Insert any text to appear after the filename between the quotes.
    //If you do not want extra text, delete between the quotes (but leave the quotes in).
    var TextAfter = " ";
    // Set font size in Points
    myTextRef.size = 10;
    //Set font - use GetFontName.jsx to get exact name
    myTextRef.font = "Arial";
    //Set text colour in RGB values
    var newColor = new SolidColor();
    newColor.rgb.red = 0;
    newColor.rgb.green = 0;
    newColor.rgb.blue = 0;
    myTextRef.color = newColor;
    // Set the position of the text - percentages from left first, then from top.
    myTextRef.position = new Array( 10, 99);
    // Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
    myLayerRef.blendMode = BlendMode.NORMAL;
    // select opacity in percentage
    myLayerRef.opacity = 100;
    // The following code strips the extension and writes tha text layer. fname = file name only
    di=(docRef.name).indexOf(".");
    fname = (docRef.name).substr(0, di);
    //use extension if set
    if ( ShowExtension == "y" )
    fname = docRef.name
    myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
    catch( e )
    // An error occurred. Restore ruler units, then propagate the error back
    // to the user
    preferences.rulerUnits = originalRulerUnits;
    throw e;
    // Everything went Ok. Restore ruler units
    preferences.rulerUnits = originalRulerUnits;
    else
    alert( "You must have a document open to add the filename!" );

    you might want to try the scripting forum howard:
    http://www.adobeforums.com/webx?13@@.ef7f2cb

  • LIghtRoom color problem vs PhotoShop CS2 on Nikon RAW

    I recently bought Adobe Lightroom and I was surprised to notice some huge color differences compared to PhotoShop CS2.
    Im using Nikon D80 and shooting RAW. I have calibrated semi-pro monitor.
    The same RAW file opens in LightRoom pretty well until you get the rendering preview. Once the preview is done, the picture becomes desaturated in red and blue and has a green cast especially in the shadows with much lower contrast. If I use Edit in PhotoShop option, the picture becomes even worse (even more desaturated and greenish) when opens in PhotoShop. If I open the same RAW in PhotoShop directly (using the NEF plug-in, not CameraRaw!) everything is just fine. The picture looks as opened in Nikon Picture Project or as I saw it when I took the picture.
    After doing some research, I think that my problem relates to the way that Adobe Camera RAW, Bridge and LightRoom open a Nikon sRGB 4.0.0.3001 (D80) raw file. However, all the things being equal, PhotoShop CS2 (using the NEF plug-in) renders the same colors as Picture Project does (and what I saw on my camera and in reality). I also noticed that choosing sRGB in Camera Raw bring the things closer to the Picture Project colors but far from identical. Anyways, there is no way to change anything in LightRoom, outer than manually twicking all colors until I think it looks good. Which, I think Is very subjective and is different for every picture.
    Right now, my Creative Suite Color Settings is North America General Purpose 2 (synchronized for all CS applications) and no application asks me anything about changing the color profile when opening the file. I shoot (with D80) in raw, Normal camera mode (no saturation / contrast, color profile change). I opened the same file in all mentionned applications (LightRoom, CameraRaw from Bridge, PhotoShop and Picture Project) and save them as .jpeg (same size, dpi, etc.) without changing anything (no camera calibration in ACR or LR; no printer profile in PhotoShop). I sent the .jpegs to my local Costco and printed them on glossy paper. All of them printed the same way that they look on the screen. LR, ACR - desaturated on red&blue, color cast on green and low contrast, while great vivid colors and contrast from PhotoShop and Picture Project. For me it looks pretty much as Adobe applications convert Nikon sRGB into a very unappealing Adobe sRGB (and way different from what I saw in reality). I know this is very subjective; some people may argue that Nikon profile is too reddish and oversaturated. But I find the whole story rather unusual. They all work in the sRGB space and there shouldn't be any differences. I've done lot of testing with color profiles and replacing the Camera Raw plugin file format (common files) with Nicon plugins and vice-versa. But still the same result.
    I create a User Profile in LightRoom and I get pretty decent colors now, but when I want to edit the file in PhotoShop (from LightRoom) I get the same green and desaturated version.
    What do you think?

    >Regarding LR, what I'm looking here is a "factory made" solution; something that can give consistent results in the initial conversion (like Nikon plugin for PhotoShop, for e.g.)
    The problem with that conversion is that you cannot change it. In lightroom you change the actual conversion parameters, which gives you far more leeway and allows for far better conversions in the end. Currently (this will change with Lightroom 2.0 apparently) the only recourse you have if you prefer Nikon's colors is to shoot jpeg, or run your NEFs through capture and create 16-bit tiffs. This is just the way it is. A hammer gives a different result than a screwdriver.
    >It's hard for me to believe that Adobe has invested so much energy and resources in color profiling but it's unable to get nearly close to the Nikon raw colors.
    Nikon's colors are far from colorimetrically correct which you can see in many tests. Here is an example for the D300: http://www.imaging-resource.com/PRODS/D300/D300IMATEST.HTM It is off in the deep reds, the saturated blues, and the Olive-like colors. Profiling the camera does not help you get close to Nikon's colors, but it will get you closer to the ideal colors. I doubt it has been Adobe's goal to get close to the in-camera rendering with Lightroom upto 1.4. They profile all the cameras and make some value judgments on what is more important. Skin tones vs saturated colors etc just like Nikon does.
    Regarding getting close to camera colors, there is a trick that you can do to get close to the camera jpeg that involves the ACR calibration scripts. You do need PS CS3 though.
    >I find rather strange that apparently there is no way to get professional conversion. This is defying the main purpose of Color Profiling, I think.
    Why is Nikon's conversion professional and Adobe's not? They are both just interpretations of the sensor data. Adobe's is actually colorimetrically more correct in many cases. Colorimetrically correct often means boring unfortunately. This has to do with the fact that our eyes are not color measurement devices but that we have brains interpreting the data. To get pleasing results, Color Profiling does not help as much as you'd like. My issue with the in-camera or Nikon software approach is that it locks you down creatively to the
    creative choices the Nikon folks made. Now, be aware that in the Lightroom 2.0 forum the Adobe folks have hinted at major changes to the rendering engine that will bring colors closer to the vendor rendering. How they will do this is unknown right now.

  • Problems with Photoshop CS6 Recognizing Multiple Graphics Cards

    Hi,
    I have a quad monitor setup with two graphics cards with the latest drivers downloaded today and installed directly off of the manufacturer's websites:
    1) AMD Radeon R9 200 Series 4GB GDDR5
    2) NVIDIA GeForce GTX 460 1GB GDDR5
    I have Photoshop CS6 64-bit (along with the rest of the Adobe Design and Web Premium) installed on my computer - which I uninstalled and reinstalled today also - and it's claiming that it has detected an error with my display driver. The Graphics Processor Settings box in Preferences is greyed out, and I've used the shift+ctrl+alt to reset preferences and check again to no avail. I've also set both of my graphics cards to turn on OpenGL Triple Buffering and to let the 3D application decide the image settings. Here's my system info, where you can see that the GPU sniffer crashed and that no video card is detected:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Windows NT
    Version: 6.2
    System architecture: AMD CPU Family:15, Model:2, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 4018 MHz
    Built-in memory: 16349 MB
    Free memory: 12120 MB
    Memory available to Photoshop: 14671 MB
    Memory used by Photoshop: 70 %
    Image tile size: 132K
    Image cache levels: 4
    Photoshop crashed on 12/5/2014 at 9:37:01 PM (GetImageViewResourceSharingGLContext)
    The GPU Sniffer crashed on 12/5/2014 at 10:47:20 PM
    Display: 4
    Display Bounds:=  top: 0, left: 1920, bottom: 1080, right: 3840
    Display: 3
    Display Bounds:=  top: -1080, left: 0, bottom: 0, right: 1920
    Display: 2
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Display: 1
    Display Bounds:=  top: -1080, left: 1920, bottom: 0, right: 3840
    No video card detected
    Serial number: 90148051671449209572
    Application folder: E:\Program Files (x86)\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\April\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 111.7G, 8.82G free
    Required Plug-ins folder: E:\Program Files (x86)\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: E:\Program Files (x86)\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Embed Watermark 4.0
       Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mezzotint 13.0
       Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Sumi-e 13.0
       Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins:
       Camera Raw 7.0
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE
    Please help!

    Yes Adobe states if you use more then one GPU adapter they should be the same else Photoshop may have problems. Photoshop CC and CC 2014 GPU FAQ
    Are you using more than one video card?
    Multiple video adapters can cause problems with GPU-accelerated or enabled features in Photoshop. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model.
    Otherwise, crashes and other problems can occur in Photoshop.
    Note: Using more than one video adapter does not enhance Photoshop's performance.

  • Bridge - Photoshop - Contact Sheet II - PLEASE HELP

    I used to be able to open bridge - go to tools - photoshop - contact sheet II
    now all it gives me is General Photoshop Error occurred
    I've even deleted bridge preferences
    Is it a problem in Photoshop or Bridge itself?
    I have tried everywhere even the forums and nobody seems to be to help
    I use the contact sheet all the time to do my pages - I can do it in photoshop but Bridge is so convenient and I can rearrange my pictures the way I want them to.
    We have other machines in the office and I tried to same thing and the other machines are working fine - it's just mine.
    Thank you for your prompt response,
    Marie

    Are you using CS4 because you will need to install the optional "Contact Sheet II" software into Photoshop CS4.
    This Link should help:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb404900&sliceId=2#h5
    You can then Select your images in Bridge and go to Tools menu/Photoshop>Contact Sheet II
    and Contact Sheet II will then open in Photoshop.

  • How does the image time stamp display /modification vary among Bridge, Photoshop, and PS Element Org

    I've noticed some discrepancies between times recorded in my image EXIF data as well as the time displayed with images in Bridge and Photoshop Elements Organizer.  For instance I may have a series of images shot within a few minutes of each other.  After having done some manipulation of a subset of the images and later on showing the sequence in both Bridge and PSE Organizer, I have noticed that the time associated with some of the images has changed.  Bridge and PSE Organizer may actually show times that differ by several hours.  It almost looks like the time is converted from the original camera time to UTC and then possibly back to the time zone where my computer is located.  The pattern is not completely consistent and may depend on what Adobe products have been used to adjust or catalog the images.  I'm looking for a good and complete description of how each product handles the image date and time stamp.  I suspect that there is some inconsistency in how this is done across the products.  I'm currently using Bridge / Photoshop CS6 Extended and Photoshop Elements Organizer 10.0 which were recently upgraded from CS 5 and 8.0 respectively.  I also use Adobe Camera Raw 7.1 to edit the Nikon raw files.  This problem appears to predate the upgrade of my products.

    Well, it must be a system-specific bug of some sort that's been introduced, because I was able to create a 4200 x 3500 image made by mapping an image of similar size to a cylinder, and the cylinder would move/rotate in real time.  Of course, I have a completely different video card and system than you do, but I'm just verifying that it's not broken everywhere.
    Rendering isn't hugely fast, but that's not unexpected with a larger image.
    Maybe being more specific would help.  Is your mesh complex?
    Is it something you'd be willing to share online or describe how to create?  I would be happy to try to match what you're doing more thoroughly to see whether I can reproduce the slowdowns.
    Beyond that, I'm not sure what to suggest...  You don't have a lot of RAM to be working on 15 megapixel images, but as you say the thing to concentrate on is that you're seeing quite different performance from the Ps CS6 beta version.
    -Noel

  • Bridge/Photoshop Colour Issues

    Bridge/ Photoshop Colour Issues:
      It appears that there are a few pictures that are noticeably dull, when I load them in Bridge and Photoshop.   Those same pictures are very vibrant when I look at them directly from the SD card or load them into Picassa.  I tried editing the picture, saving it in Photoshop, then opening it up in Picassa and it has the same dullness.  Since having this issue, I have updated the drivers on my Quadro graphics card, but I think it may be something to do with the way that I set up Adobe Bridge, because this is the first time I have imported a large batch of photos from Bridge.  However, I pretty much left everything as the standard settings in Bridge.  Any suggestions?
      FYI - I just started using the Adobe Master Collection, with Win 7 Pro 64 and Huey Pro embedded on my laptop. My colour settings are Huey Pro on my laptop, SRGB in Photoshop and General Purpose for Bridge (I haven’t had this issue before and Huey Pro has been my colour settings on my laptop since I got Adobe).
    Derek

    Dwhug wrote:
    However, when I switch the Colour Settings>Working Spaces>RGB to "Monitor RGB - Huey Pro" the problem is fixed.
    That turns off color management in Photoshop, so yes, that would match other applications that aren't color managed at all. You're not fixing the problem, you're just hiding the symptom.
    If you're certain the Photoshop version is wrong, that means your monitor profile is corrupt. A corrupt monitor profile only affects color managed software like Photoshop. Other applications don't use the monitor profile and never touch it.
    If it's merely the fact that Photoshop is different, that's normal and all as it should be. With a valid monitor profile Photoshop is right and the others wrong.

  • Problem activating photoshop after ended trial version

    Hi,
    I have a problem activating photoshop. I have an educational account. Want to run it on a macbook pro which previously had a trial account on it. When downloading using my account photoshop says trial ended. Other apps like bridge and acrobat pro just work. Don't have a serial number to activate as it is an educational account. What to do?
    ps all ready uninstalled, use adobe cc cleaner, siigned out etc
    tia

    Hi Brinkeyboy
    Which version of Photoshop are you trying to activate? Make sure that your computer can communicate with the Adobe servers by going thru the steps in this help page.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Try the steps in this help page too. Remove the opm.db file. http://helpx.adobe.com/creative-cloud/kb/creative-cloud-application-recognizing-available. html
    Let us know if you are still having issues
    Thanks
    Scott

  • Troubleshoot installation problems in Photoshop Lightroom on Windows Vista

    This document can help you to resolve system errors that occur while you use Adobe Photoshop Lightroom on Windows Vista. System errors can manifest in many different ways, including (but not limited to) the following:
    A blank or flickering dialog box
    A frozen cursor or screen
    A blue screen
    An unexpected restart
    An error message such as:
    "Setup is unable to load the installation script file."
    "Unable to create a directory under C:\Windows\System. Please check write-access to the directory."
    "Uninstalling: C:\Program Files\Adobe\Adobe Photoshop Lightroom refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location."
    Note: If you attempt to install Photoshop Lightroom to a drive that doesn't have the minimum required space available, the installation will fail. You must then completely reinstall to another location that has sufficient free space.
    Many different factors can cause system errors, including conflicts among device drivers, applications, operating system settings, hardware, and corrupt elements in specific files. Although a system error may occur only when you work with Photoshop Lightroom, Photoshop Lightroom may not necessarily be the cause; it may be the only application that uses enough memory or processor cycles to expose the problem.
    To benefit most from this document, perform the tasks in order. Keep track of the tasks that you perform and the results of each, including errors and other problems. Adobe Technical Support can use this information to better assist you if you need to call.
    You must be logged on as an administrator to perform some of the procedures in this document.
    Important: Some of the procedures in this document may initiate a User Access Control dialog that asks for your permission to continue. Read the details in the dialog to determine if you want to continue. If you choose to cancel the dialog, then you will not be able to continue with that troubleshooting step.
    The steps in this document that refer to the Control Panel are in reference to the Classic view. For information on switching the Control Panel to the Classic view and many other common OS procedures, see Common Microsoft Windows Vista procedures (TechNote kb401275)
    Some of these procedures require you to locate hidden files and hidden folders. Some procedures require you to locate files by their full file names, which include extensions (for example, example_filename.ini). By default, Windows Explorer doesn't show hidden files, hidden folders, and file name extensions that it recognizes.
    To show hidden files, hidden folders, and all file name extensions in Windows Explorer:
    In Windows Explorer, choose Organize > Folder And Search Options.
    Click the View tab in the Folder Options dialog box.
    In Advanced Settings, select Show Hidden Files And Folders.
    Deselect Hide Extensions For Known File Types.
    Click OK.
    Note: The procedures in this document are based on the default interface of Windows Vista. If the interface is customized, some procedures may vary. For example, a commonly encountered difference is the navigation to Control Panel from the Start menu: You may navigate Start > Settings > Control Panel instead of Start > Control Panel. Additionally, the procedures in this document assume you are using the Classic View of the Control Panel: To view the Control Panel in the Classic View, click Switch To Classic View on the Control Panel navigation bar on the left side of the window.
    Beginning troubleshooting
    The tasks in this section can help you resolve the most common system errors. Before performing any of these tasks, back up all personal files (for example, Photoshop Lightroom files you created). Always restart the computer after a system error occurs to refresh system memory. Continuing to work without restarting the computer may compound the problem.
    1.Make sure that the system meets the minimum requirements for PhotoshopLightroom.
    Photoshop Lightroom may not run correctly on a system that doesn't meet the following requirements:
    Intel Pentium 4 or equivalent processor
    Microsoft Windows XP, Windows Vista, Windows 7
    768 MB of RAM (1 GB recommended)
    1 GB of available hard-disk space
    CD-ROM drive
    In addition to these requirements, a video card that supports 24-bit (16 million) or more colors, and a resolution of 1024 x 768 or higher, is recommended.
    * Photoshop Lightroom 1.0 will install and run on Windows Vista but Adobe cannot guarantee the quality of the software experience until Adobe fully certifies Photoshop Lightroom for use on Windows Vista.
    To check basic system information, such as processor speed and how much RAM is installed, choose Start > Control Panel > System.
    2. Delete previously installed application files, especially if you had the public beta version of Photoshop Lightroom installed.
    To delete files from a previous Adobe Photoshop Lightroom installation attempt:
    Choose Start > Control Panels > Add or Remove Programs.
    Select Adobe Photoshop Lightroom and choose to remove it.
    Close the Add Or Remove Programs window and the Control Panel.
    Open Windows Explorer.
    If the Lightroom.exe file is still in the Program Files\Adobe\Adobe Photoshop Lightroom folder, delete it.
    If the Lightroom Preferences.agprefs file is still in the Documents and Settings/[username]/Application Data/Adobe/Lightroom/Preferences folder, delete it.
    Empty the Recycle Bin.
    Try to reinstall. If you cannot, continue with the next two sections in this step:
    Move all the folders under the Users/[username]/AppData/Roaming/Adobe/Lightroom folder into a new folder on the desktop; name the folder Lightroom Presets. These are the presets that were installed with the application and that you created.
    Move all the folders under the Users/[username]/Pictures/Lightroom/Lightroom Previews.lrdata folder into a new folder on the desktop; name the folder Lightroom Previews. If you have a large number of images, you can move this folder back to its original location before you open Photoshop Lightroom, once it's installed. Or you can delete this folders to re-create it when Photoshop Lightroom opens. If there are further problems with Photoshop Lightroom after it's installed, it might be due to corruption in the previews, in which case you need to delete this folder and re-create it.
    Try to reinstall.Important: Do not delete the Lightroom Database.lrdb file!
    If there are further problems with Photoshop Lightroom after it's installed, these issues may be due to corruption in the preset files you created, in which case you need to remove them and re-create them, or test each preset individually.
    Note: If you can reinstall, and if this is not the first time you opened Photoshop Lightroom, then Photoshop Lightroom will look for a library database file. If it does not find a library in the expected location, it will prompt you to create a new library, locate the library, or exit. Exit will close the dialog box, and Photoshop Lightroom will not open. Although you can tell Photoshop Lightroom to locate your library, it's best to put it back in the default location and then open the application.
    If you can reinstall, close Photoshop Lightroom and then copy any presets you created from the Lightroom presets on the desktop back into the Users/[username]/AppData/Roaming/Adobe/Lightroom folder.
    If you cannot reinstall, then move the Lightroom Database.lrdb file from the Users/[username]/Pictures/Lightroom folder into a new folder called Lightroom Database File and save this file on the desktop. This is your database, if you previously had Photoshop Lightroom installed.
    Reinstall Photoshop Lightroom. If you cannot reinstall, continue with the next task in this document.
    3. Log in as Administrator before installingPhotoshopLightroom.
    In Windows Vista, you must be logged in with local (that is, machine) Administrator rights to install Photoshop Lightroom. If you don't have administrator rights, contact your system administrator for assistance.
    4. Check the CD and CD-ROM drive.
    Dust or dirt on a CD can interfere with an installation and prevent the CD-ROM drive from recognizing the CD. Examine the Photoshop Lightroom CD for dirt, dust, or fingerprints. Gently wipe the bottom of the CD from the center outward with a soft, lint-free cloth.
    Verify that the CD-ROM drive can read other CDs. If it can't, examine the CD caddy or loading tray for dirt, and clean it with a lint-free cloth. If it still can't read other CDs, contact the CD-ROM drive manufacturer or the computer manufacturer.
    5. Install current Windows service packs and other updates.
    Updates to the Windows operating system improve its performance and compatibility with applications. You can obtain Windows service packs and other updates from the Microsoft website at www.windowsupdate.com. For assistance installing service packs and other updates, contact Microsoft technical support.
    Important: Before you install a system update, check the system requirements for Photoshop Lightroom (and any third-party software or hardware you may use with Photoshop Lightroom ) to ensure compatibility. If the update isn't listed, then contact Adobe or the manufacturer of your third-party software or hardware.
    6. InstallPhotoshopLightroomfrom the desktop and use the default installation folder.
    Some system components such as device drivers and virus protection utilities can conflict with the Photoshop Lightroom installer and result in an incomplete or failed installation, or they can cause problems when you install to a folder or when you use a path to the default installation folder that contains a special character, such as #. To prevent these conflicts, install Photoshop Lightroom from the desktop, and use the default folder name and path.
    If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
    Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
    Open the Adobe Photoshop Lightroom folder on the desktop.
    Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
    7.Re-create thePhotoshopLightroompreferences file.
    Re-create the Photoshop Lightroom preferences file to eliminate problems that a damaged preferences file might cause:
    Quit Photoshop Lightroom.
    Rename the Lightroom Preferences.agprefs file (for example, to Lightroom Preferences.old) in the Users/[username]/AppData/Roaming/Adobe/Lightroom/Preferences folder.
    Start Photoshop Lightroom. Photoshop Lightroom creates a new preferences file.
    If the problem continues, the preferences file isn't the cause. To restore custom settings, delete the new preferences file and restore the original name of the previous preferences file.
    8.Install and run Photoshop Lightroom while no other applications are running.
    Some applications may interfere with installing or running Photoshop Lightroom. Virus protection programs are meant to stop viruses from installing on your computer. Before installing or starting Photoshop Lightroom, disable other applications, including virus protection programs and startup items (items that start automatically with Windows).
    To disable startup items and non Microsoft services:
    Quit all applications.
    Choose Start, type msconfig in the Search text box, and press Enter.
    Write down all unselected items under the Startup and Services tabs.
    Click the General tab, and choose Selective Startup.
    Click the Startup tab and select Disable All.
    Click the Services tab and select Hide All Microsoft Services.
    Select Disable All then re-select FLEXnet Licensing Service. If you are unsure whether an item is essential, then leave it deselected (disabled).
    Click Apply, and restart Windows for the changes to take effect.
    Note: Upon restart, you'll be notified that the System Configuration utility has made changes to the way that Windows starts up. Click OK. When the System Configuration utility appears, click Cancel.
    Right-click icons in the Notification Area and close or disable any startup items that are still active.
    9. Install Photoshop Lightroom to a different hard disk after disabling startup items and installing from the hard disk.
    Hard disk problems can prevent Photoshop Lightroom from installing correctly. By installing Photoshop Lightroom to a different physical hard disk, you can verify if the original hard disk is preventing installation. First, completely remove Photoshop Lightroom from the hard disk.
    To install Photoshop Lightroom to a different hard disk after disabling startup items:
    Follow the steps in task 8 above to disable startup items.
    If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
    Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
    Open the Adobe Photoshop Lightroom folder on the desktop.
    Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
    Click Change and select a different hard disk in the Change Current Destination Folder window. Click OK, and then follow the on-screen instructions.
    Intermediate troubleshooting
    If the tasks in the previous section don't solve the problem, try the following intermediate troubleshooting tasks.
    10. Install and run Photoshop Lightroom in a new user account.
    Create a new user account that has the same permissions as the account that you use when the problem occurs. If the problem doesn't recur, the original user account may be damaged. For instructions on creating a new user account, see To add a new user to the computer in Windows Help or contact your system administrator.
    11. Optimize handling of temporary files by Windows Vista.
    Windows and applications store working data in temporary (.tmp) files that they create on the hard disk. Excessive or outdated temporary files can interfere with performance of Windows or applications.
    Delete temporary files by using the Disk Cleanup utility included with Windows or by using the following instructions. Make sure that at least 1 GB of free space is available on the hard disk to which temporary files are written. To start Disk Cleanup, choose Start > All Programs > Accessories > System Tools > Disk Cleanup. For information about Disk Cleanup, see Windows Help.
    To manually delete temporary files:
    Note: Windows deletes temporary files when Windows and applications close normally. However, when Windows or an application crashes, temporary files can accumulate on the hard disk. Windows may prevent you from deleting some temporary files as they may be in use. Delete as many temporary files as you possibly can, without deleting the files that are in use.
    Quit all applications.
    Choose Start and type %tmp% in the Search text box and press Enter.
    Delete the contents of this folder.
    Note the drive letter where this directory is located.
    To ensure that at least 1 GB of free space is available on the hard disk to which temporary files are written:
    Choose Start > My Computer.
    Select the drive noted in step 4. Right click and select Properties.
    Confirm the drive has at least 1 GB of free space.
    12. Repair and defragment hard disks.
    System errors can occur if hard disks contain damaged sectors or fragmented files. Repair and defragment hard disks, either by using the Error-checking tool and Disk Defragmenter utility included with Windows or by using a third-party disk utility. You should run such utilities on each hard disk or partition. More information about the Error-checking tool and Disk Defragmenter appears below; for more information about a third-party disk utility, refer to the documentation for the utility.
    The Error-checking tool repairs bad sectors, lost allocation units and file fragments, cross-linked files, and invalid file names. To access the Error-checking tool, choose Start > Computer, right-click the desired hard disk, and choose Properties from the menu. In the Local Disk Properties dialog box, click the Tools tab, and then click Check Now in the Error-checking area.
    Note: To prevent Disk Defragmenter from moving files to bad sectors of a disk, run the Error-checking tool before running Disk Defragmenter.
    Disk Defragmenter rearranges the files and free space on your computer so that files are stored in contiguous units and free space is consolidated in one contiguous block. To access the Disk Defragmenter utility, choose Start > All Programs > Accessories > System Tools > Disk Defragmenter.
    13. Scan the system for viruses.
    Use current anti-virus software to check the system for viruses. Virus infections can damage software and cause system errors. For more information, see the documentation for the anti-virus software.
    14. Try to install Photoshop Lightroomon a different computer.
    Try to install Photoshop Lightroom on a different computer to determine if the problem is unique to your computer. If the problem is unique to your computer, contact the computer manufacturer; if the problem occurs on multiple computers, contact Adobe Technical Support.
    Advanced Troubleshooting
    If the tasks in the previous section don't resolve the problem, you may be able to resolve the problem by reinstalling Windows Vista and Photoshop Lightroom, reformatting your hard disk and reinstalling Windows Vista and Photoshop Lightroom, or by determining if hardware is conflicting with Photoshop Lightroom.
    Disclaimer: Adobe doesn't support hardware and provides these procedures as a courtesy only. For further assistance, contact the hardware manufacturer or an authorized reseller. If you troubleshoot hardware problems yourself, you may void the warranty for your computer.
    Note: Before you remove or rearrange hardware, turn off and disconnect power to the computer and any peripheral devices.
    15. Log in using the built-in Administrator account.
    The built-in Administrator account has a higher access level to the system than a normal local administrator account. By default the built-in Administrator account is disabled. For information about enabling and logging in to the built-in Administrator account, contact your system administrator. You can also refer to this support document on the Microsoft support website: http://support.microsoft.com/kb/926183/en-us?spid=11737&sid=73.
    16. Reformat the hard disk, and reinstall only Windows Vista and Photoshop Lightroom.
    Reformat the hard disk, and then install only Windows Vista and Photoshop Lightroom from the original installation media. Reformatting a disk erases all files it contains, so be sure to back up all personal files first. Also make sure that you have all application and system disks.
    For instructions on performing a clean installation of Windows Vista, see document 918884, "How to install Windows Vista" on the Microsoft website at http://support.microsoft.com.
    Note: Don't install additional software or hardware until you're sure that the problem is resolved. Don't back up the hard disk and restore Windows and Photoshop Lightroom instead of reinstalling them. If the problem is caused by an application or Windows, and either one is restored instead of reinstalled, the problem may recur.
    After you reformat the hard disk and reinstall Windows and Photoshop Lightroom, try to re-create the problem:
    If the problem no longer occurs, then install other applications one at a time and try to re-create the problem after each installation. If the problem occurs after an installation, then the recently installed application may be the cause.
    If the problem occurs when only Windows and Photoshop Lightroom are installed, then the cause may be hardware-related, and you should contact the hardware manufacturer or an authorized reseller for assistance.
    17. Check for problems with RAM modules.
    Ensure that the RAM modules are installed properly and are not the cause of your problem. Do one or both of the following:
    Change the order of the installed modules.
    Remove all but the minimum number of modules needed to run Windows and [product], and test to see if the problem persists. If it does, replace the modules you removed and remove the others, testing again to see if the problem recurs. If it doesn't, then one or more of the removed modules are the cause. For assistance, contact the RAM manufacturer.

    You've tried Help>Updates from within photoshop cs6?
    Or this 8.3 updater
    http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.3.52/setup.zip
    If that doesn't work, you can install camera raw 8.3 by following the directions on the following page
    Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista

  • Problem with Photoshop CS4 after migration to new Mac

    I just migrated from an old Mac to a new Macbook Pro running Mavericks. I'm having a problem with Photoshop CS4. Specifically, two things:
    1) When I open an image in Camera Raw, I get this error:
    Fatal error - missing component
    /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
    2) When I try to save anything, it tells me it can't because of a program error.
    I've looked around for a solution. Apparently I had to install Java, but that hasn't solved the issue. A couple of people mentioned that reinstalling would work for a similar problem. My problem with that is that my disk is on the other side of the world and my new macbook doesn't have a disk drive anyway. So I logged into my Adobe account hoping to see a download link for software I have licences for, but there isn't one.
    So my question is firstly, whether there is a simpler solution to the errors I am getting and, if not, if there's a solution to reinstalling Photoshop CS4 without the disk.
    Thanks!

    Did you use Apple's migration tool?  It misses a lot of support files, especially in the Application Support directories.
    You'll have to copy those files manually, or reinstall the app.

  • Problem with Photoshop CS6. If I open a file using Camera RAW

    I have a new problem with Photoshop CS6.  If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to.  I don't know if I changed something by accident or not. 
    Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..."  The save as window opens showing the file name and format.  The default format seems to be .PSD.  I use the drop down to select .jpg.  The file saves normally as a .jpg.  When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
    I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite  but it always used to do that.  This adds a few extra steps when closing a document and it really slows me down.
    In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
    I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
    Any ideas?
    Thanks in advance

    You are in the wrong forum;  You actually need Photoshop forum at this link:
    <http://forums.adobe.com/community/photoshop?view=discussions>
    Hope you can repost your question at the correct link.

  • Problems with Photoshop CS2 I originally purchased this software several years ago. At time I was running Microsoft Windows XP. This computer recently was replaced with  a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few

    Problems with Photoshop CS2
    I originally purchased this software several years ago. At time I was running Microsoft Windows XP.
    This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few exceptions as follows;
    when the software comes up initially I get a message that says “could not complete your request because of program error”. Hitting OK allows me to continue using the software .
    When I try to activate a function using CTLR or ALT keys I get this message “required application failed to load and the product cannot continue. Please reinstall the application”. This causes the application to abort.
    Reloading my CS2 continues to generate the same messages when I depress the CTLR or ALT keys.

    Your original copy is obsolete and Adobe is offering a free replacement you are entitled to. Download and use that and that should clear it up for you.
    https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
    Download this copy of CS2 and use the serial number provided next to the download link.

  • Problem with Photoshop CS5. Memory and Harddisk spaces

    Just got CS5 Master Suite. Whenever I open photoshop it takes a ton of memory 1 gig +. When I open files it takes up more and more until it takes up all my memory and hard disk space. I open a simple multi layered file that is 25 megs in size to work on it. Before I know it photoshop is taking 20gigs+ of my hard disk space along with 3+ gigs of system memory. Is there a memory problem in photoshop cs5?
    Thanks!
    Joseph

    So I just opened the 25 meg file in photoshop cs5 and watched my free space on my hard drive go down 8 gigs the instant I opened it. It went from 27 gigs of freespace to 19 instantly.
    I am running a Macbook Pro with OSX 10.6., 4 gigs of ram on board.
    anyone else having simular problems?

  • Problem with Photoshop CS5. Memory and Hard disk space Mac OSX

    Just got CS5 Master Suite.  Whenever I open photoshop it takes a ton of memory 1 gig +. When I open  files it takes up more and more until it takes up all my memory and hard  disk space. I open a simple multi layered file that is 25 megs in size  to work on it. Before I know it photoshop is taking 20gigs+ of my hard  disk space along with 3+ gigs of system memory. Is there a memory  problem in photoshop cs5?
    Thanks!
    Joseph
    UPDATE:
    So I just opened the 25 meg file  in photoshop cs5 and watched my free space on my hard drive go down 8  gigs the instant I opened it. It went from 27 gigs of freespace to 19  instantly. As I open more files and close others it works till my harddrive goes to zero space... stalls the computer big time. Only way to correct it is to quit photoshop cs5 and wait a few minutes for the space to return... and it takes a few minutes for it all to return.
    I am running a Macbook Pro with OSX 10.6., 4 gigs of ram on board.
    anyone else having simular problems?

    http://forums.adobe.com/thread/681490?tstart=0
    Maybe this thread offers some information.
    And have you perused this page?
    http://kb2.adobe.com/cps/404/kb404440.html

Maybe you are looking for

  • Calls worked through Mac and from iPhone and Now Suddenly Don't Work at All

    After Monday's update, I was able to make and receive calls through my iPad 3 and iMac (about a year old) with no problems at all. Matter of fact, it was a little annoying to have all three devices ringing whenever I received a call. Then mid-week, t

  • Configuration for sync/async bridge in Jms adapter

    Can someone give me a hint what I might be doing wrong? The scenario is: synchronous proxy to jms. Integration repository: Created synchronous outbound interface and synchronous inbound interface, message mapping, interface mapping. Integration direc

  • Howto change color for all elements

    I want to update the formatting for some existing Keynote presentations. Applying a new Theme does most of the work, but there are some things that are not updated to the new theme. For example: background color of certain text boxes -- and the color

  • Running out of application memory - AVCHD MultiCam edit

    I need help badly. I'm editing a MultiCam sequence, consisting of (3) AVCHD video tracks.  I'm getting a constant error message: "Your system has run out of application memory", then pauses, or is not responsive. Basic setup: Premiere Pro CC 2014 iMa

  • HP_Pavilon_DV7_3065DX_LCD_Screen-"Two fix strange horizontal lines

    Hello I week ago, on my lcd-screen just show me two fixed horizontal lines, I can't remove them.  This is printscreen, but When i paste the screen it's look like normal. so this red line is in Paint program and it just show where the problem is. Any