Problem in File Adapter jca.file.FileName

Hello, I have problem in sending variable data to the file adapter property
I have defined Variable FlowData of Type Element from a XSD
When I am trying to assign the variable data to the File adapter it is throwing error
*<bpelx:inputProperty name="jca.file.FileName"*
variable="flowData"
query="ns2:flowData/ns2:fileInfo/ns2:name"/>
Error query "ns2:flowData/ns2:fileInfo/ns2:name" is invalid, because step 'ns2:flowData' is not valid.
Please help me!!

Hi,
Try to add a slash */* at the beginning of the xpath...
*/ns2:flowData/ns2:fileInfo/ns2:name*
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question
https://forums.oracle.com/forums/ann.jspa?annID=330

Similar Messages

  • Error in Receiver File adapter using File content Conversion

    Hi,
    I am getting the following error in the receiver file adapter.
    Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
    I am using the below parameters for FCC:
    Recordset Structure - statement
    statement.endSeparator - 'nl'
    statement.fieldSeparator - '0X09'
    statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
    ignoreRecordsetName - true
    Please let me know where i am going wrong.
    Thanks,
    Aparna

    Hi Aparna,
    I feel the problem in your content conversion parameters is with
    statement.fieldNames and ignoreRecordsetName
    When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
    [http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
    Hope this helps !!
    Regards,
    Amit

  • File Adapter or File  Transport which one will give more performance

    Hi all,
    File Adapter or File Transport which one will give more performance ? in OSB?
    Which one to select any one did performance analysis?
    Thanks
    Phani

    Why don't you just go read some benchmarks?
    http://www.barefeats.com/mbpp18.html

  • Sender File Adapter with file conversion

    Hi guys,
    I’m using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
    An example:
    value1  <b>value2</b>  value3…
    I want to ignore <b>value 2</b> but I can’t find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
    Thanks in advance,
    Ricardo.

    hi,
    there always is another way:)
    you can import the whole line to one field
    and cut it inside the adapter module
    (then you can define start and stop of the substring that you need to use)
    but of course it's not standard even though it's quite easy to achieve in java
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Duplicate namespace declarations when writing a file with JCA file adapter

    I am using JCA File adapter to write a an XML file. The composite contains a mediator which received and transforms an XML to desired format and then calls a JCA file adapter to write the file.
    The problem that I am having is that the written file has declaration of namespaces repeated with repeating elements instead of a single declaration at root. For ex.
    instead of
    <ns0:Root xmlns:ns0="namespace0"  xmlns:ns1="namespace1" xmlns:ns2="namespace2">
    <ns0:RepeatingChild>
    <ns1:Element1>value1</ns1:Element1>
    <ns2:Element2>value2</ns2:Element2>
    </ns0:RepeatingChild>
    <ns0:RepeatingChild>
    <ns1:Element1>value3</ns1:Element1>
    <ns2:Element2>value4</ns2:Element2>
    </ns0:RepeatingChild>
    </ns0:Root>What I see in the file is:
    <ns0:Root xmlns:ns0="namespace0"  xmlns:ns1="namespace1" xmlns:ns2="namespace2">
    <ns0:RepeatingChild>
    <ns1:Element1 xmlns:ns1="namespace1" xmlns:"namespace1">value1</ns1:Element1>
    <ns2:Element2 xmlns:ns2="namespace2" xmlns:"namespace2">>value2</ns2:Element2>
    </ns0:RepeatingChild>
    <ns0:RepeatingChild>
    <ns1:Element1 xmlns:ns1="namespace1" xmlns:"namespace1">>value3</ns1:Element1>
    <ns2:Element2 xmlns:ns2="namespace2" xmlns:"namespace2">>value4</ns2:Element2>
    </ns0:RepeatingChild>
    </ns0:Root>So basically all the elements which are in different namespace than root element have a namespace declaration repeated even though the namespace identifier is declared at the root elment level.
    Although, the XML is still valid, but this is unnecessarily increasing the filesizes 3-4 times. Is there a way I can write the XML file without duplicate declarations of namespaces?
    I am using SOA Suite 11.1.1.4
    The file adapter has the schema set as above XML.
    I tried the transformation in mediator using XSL and also tried using assign [source(input to mediator) and target(output of mediator, input of file adapter) XMLs are exactly same].
    but no success.

    I used automapper of JDeveloper to generate the schema. The source and target schema are exactly same.
    I was trying to figure it out and I observed that if the namespaces in question are listed in exclude-result-prefixes list in xsl, then while testing the XSL in jDeveloper duplicate namespaces occur in the target and if I remove the namespace identifiers from the exclude-result-prefixes list then in jDeveloper testing the target correctly has only a single namespace declaration at the root node.
    But, when I deployed the same to server and tested there, again the same problem.

  • How to pass Username from OWSM Security policy in Oracle Apps Adapter .jca file

    My BPEL process uses Oracle Applications Adapter. The following is the .jca file for the Adapter.  The Username is initialized statically to "sysadmin" when I created the Adapter.Is it possible to pass in the username from the OWSM Security policy for the username value below? If so how to do? I appreciate your response.
    <adapter-config name="EBSAdapter" adapter="Apps" wsdlLocation="../WSDLs/EBSAdapter.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
      <connection-factory UIConnectionName="EBS1" location="eis/Apps/EBS1" UIConcurrentPgmName="" UIOracleAppType="DBOBJECT"/>
      <endpoint-interaction portType="EBSAdapter_ptt" operation="EBSAdapter">
        <interaction-spec className="oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec">
          <property name="SchemaName" value="APPS"/>
          <property name="PackageName" value="INTG"/>
          <property name="ProcedureName" value="GET_USER_PROFILE1"/>
          <property name="IRepInternalName" value="PLSQL:INTG:WEBCENTER_GET_USER_PROFILE1"/>
          <property name="Username" value="sysadmin"/>
          <property name="Responsibility" value="System Administrator"/>
        </interaction-spec>
      </endpoint-interaction>
    </adapter-config>

    1. Go to Invoke activity
    2. Click on Properties tab.
    3. click Add
    4. Add this property "jca.apps.Username" and map it with either variable or expression.
    5. Populate variable defined at previous step with some valid username value at runtime.
    hope this helps.
    Regards,
    Karan
    Oracle Fusion Middleware Blog

  • How to pass Username dynamically in Oracle Apps Adapter .jca file

    My BPEL process uses Oracle Applications Adapter. The following is the .jca file for the Adapter.  The Username is initialized statically to "sysadmin" when I created the Adapter. How can I change this to be passed dynamically at runtime? Can I use an EL Expression or an XPath variable. If so how to do and what the correct syntax is?
    Is it possible to pass in the username from the OWSM Security policy for the username value below? If so how to do? I appreciate your response.
    <adapter-config name="EBSAdapter" adapter="Apps" wsdlLocation="../WSDLs/EBSAdapter.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
      <connection-factory UIConnectionName="EBS1" location="eis/Apps/EBS1" UIConcurrentPgmName="" UIOracleAppType="DBOBJECT"/>
      <endpoint-interaction portType="EBSAdapter_ptt" operation="EBSAdapter">
        <interaction-spec className="oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec">
          <property name="SchemaName" value="APPS"/>
          <property name="PackageName" value="INTG"/>
          <property name="ProcedureName" value="GET_USER_PROFILE1"/>
          <property name="IRepInternalName" value="PLSQL:INTG:WEBCENTER_GET_USER_PROFILE1"/>
          <property name="Username" value="sysadmin"/>
          <property name="Responsibility" value="System Administrator"/>
        </interaction-spec>
      </endpoint-interaction>
    </adapter-config>

    1. Go to Invoke activity
    2. Click on Properties tab.
    3. click Add
    4. Add this property "jca.apps.Username" and map it with either variable or expression.
    5. Populate variable defined at previous step with some valid username value at runtime.
    hope this helps.
    Regards,
    Karan
    Oracle Fusion Middleware Blog

  • File adapter:  Receiver File Content Conversion problem.. XML to CSV..!!

    Hi,
    I am facing some problem in FCC for Receiver adapter. It has to convert from XML to CSV File.
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:PaymentFull_Target xmlns:ns0="http://sdn.com/Payment">
    - <RECORDSET>
    - <Header>
      <LineItem>1</LineItem>
      <SaleNumber>102</SaleNumber>
      <TransNumber>105</TransNumber>
      <Store>1326</Store>
      <variant>Z6</variant>
      <TransType>NEW</TransType>
      <Adjustm_Type />
    </Header>
    - <Header>
      <LineItem>2</LineItem>
      <SaleNumber>102</SaleNumber>
      <TransNumber>105</TransNumber>
      <Store>1326</Store>
      <variant>Z6</variant>
      <TransType>NEW</TransType>
      <Adjustm_Type />
    </Header>
    - <Header>
      <LineItem>3</LineItem>
      <SaleNumber>102</SaleNumber>
      <TransNumber>105</TransNumber>
      <Store>1326</Store>
      <variant>Z6</variant>
      <TransType>NEW</TransType>
      <Adjustm_Type />
    </Header>
    </RECORDSET>
    </ns0:PaymentFull_Target>
    Output File is coming only with lineitem values , remaining fields are not coming.
    *1,2,3*
    FCC Used...
    RecordSet Structure -- Header
    Header.fieldNames -
    LineItem,SaleNumber,TransNumber,Store,variant,TransType,Adjustm_Type
    Header.fieldSeparator-----   ,
    Header.endSeparator-----    'nl'
    Did I miss anything.. any idea whats going wrong?
    Thanks
    Deepthi

    Hi Deepthi,
    Mention the occurrence of header in Recordset
    You specify like this:
    Recordset: Header, *
    Header.fieldSeparator : u2018Field Separatoru2019
    -->For FCC on Receiver side you donu2019t have to mention the field names.
    -->The u2018endSeparatoru2019 parameter needs to given for substructure only
    Check this links:
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    /people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    Rgds,
    Akhila

  • Reading File Using JCA File Adapter

    Hi ,
    I have used Jdeveloper to create File Adapter Service using synchronous Read operation to read .csv file from statically defined physical path, then generated Business Service using eclipse while importing jca, xsd and wsdl generated in Jdeveloper , but when running Buisiness Serrvice i am getting an error as follows saying no data to process while FileB is present in that location containing data also :
    The invocation resulted in an error: Invoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/file/FileReadService [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
    No Data to process.
    File D:\ReadFile\"FileB.txt" to be processed was not found or not available or has no content
    ; nested exception is:
    BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File D:\ReadFile\"FileB.txt" to be processed was not found or not available or has no content
    Please make sure that the file exists in the specified directory.
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/file/FileReadService [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
    No Data to process.
    File D:\ReadFile\"FileB.txt" to be processed was not found or not available or has no content
    ; nested exception is:
    BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File D:\ReadFile\"FileB.txt" to be processed was not found or not available or has no content
    Please make sure that the file exists in the specified directory.
    at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:153)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
    at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
    at $Proxy125.sendMessageAsync(Unknown Source)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
    at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:377)
    at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:76)
    at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:134)
    at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:132)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
    at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
    at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
    at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
    at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
    at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_1033_WLStub.invoke(Unknown Source)
    at com.bea.alsb.console.test.TestServiceClient.invoke(TestServiceClient.java:174)
    at com.bea.alsb.console.test.actions.DefaultRequestAction.invoke(DefaultRequestAction.java:117)
    at com.bea.alsb.console.test.actions.DefaultRequestAction.execute(DefaultRequestAction.java:70)
    at com.bea.alsb.console.test.actions.ServiceRequestAction.execute(ServiceRequestAction.java:143)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
    at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
    at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
    at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
    at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
    at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
    at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
    at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
    at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
    at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
    at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
    at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
    at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
    at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
    at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
    at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
    at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
    at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
    at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
    at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
    at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
    at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
    at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
    at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
    at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/file/FileReadService [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
    No Data to process.
    File D:\ReadFile\"FileB.txt" to be processed was not found or not available or has no content
    ; nested exception is:
    BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File D:\ReadFile\"FileB.txt" to be processed was not found or not available or has no content
    Please make sure that the file exists in the specified directory.
    at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:263)
    at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
    ... 117 more
    Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/file/FileReadService [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: No Data to process.
    No Data to process.
    File D:\ReadFile\"FileB.txt" to be processed was not found or not available or has no content
    ; nested exception is:
    BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File D:\ReadFile\"FileB.txt" to be processed was not found or not available or has no content
    Please make sure that the file exists in the specified directory.
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:667)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeOperation(WSIFOperation_JCA.java:357)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:316)
    at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.invokeWsifProvider(JCABindingReferenceImpl.java:359)
    at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:257)
    ... 118 more
    Caused by: BINDING.JCA-11007
    No Data to process.
    No Data to process.
    File D:\ReadFile\"FileB.txt" to be processed was not found or not available or has no content
    Please make sure that the file exists in the specified directory.
    at oracle.tip.adapter.file.outbound.FileReader.readFile(FileReader.java:272)
    at oracle.tip.adapter.file.outbound.FileReader.executeFileRead(FileReader.java:178)
    at oracle.tip.adapter.file.outbound.FileInteraction.executeFileRead(FileInteraction.java:331)
    at oracle.tip.adapter.file.outbound.FileInteraction.execute(FileInteraction.java:395)
    at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:534)
    ... 122 more
    Regards,
    Abhinav

    Hi ,
    When i tied to hit the same service again today after shutting down my server yestrerday , i am getting an error response but yesterday it was working nice i tried all read , syncread , write operations , they were working well .. can u please help to debug ......
    The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/file/FileReadService [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileReadInteractionSpec due to: oracle.tip.adapter.file.outbound.FileReadInteractionSpec; nested exception is:
    java.lang.ClassNotFoundException: oracle.tip.adapter.file.outbound.FileReadInteractionSpec; nested exception is:
    oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileReadInteractionSpec due to: oracle.tip.adapter.file.outbound.FileReadInteractionSpec; nested exception is:
    java.lang.ClassNotFoundException: oracle.tip.adapter.file.outbound.FileReadInteractionSpec
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/file/FileReadService [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileReadInteractionSpec due to: oracle.tip.adapter.file.outbound.FileReadInteractionSpec; nested exception is:
    java.lang.ClassNotFoundException: oracle.tip.adapter.file.outbound.FileReadInteractionSpec; nested exception is:
    oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileReadInteractionSpec due to: oracle.tip.adapter.file.outbound.FileReadInteractionSpec; nested exception is:
    java.lang.ClassNotFoundException: oracle.tip.adapter.file.outbound.FileReadInteractionSpec
    at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:155)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
    at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
    at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
    at $Proxy125.sendMessageAsync(Unknown Source)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
    at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
    at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
    at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:377)
    at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:76)
    at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:134)
    at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:132)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
    at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
    at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
    at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
    at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
    at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_1033_WLStub.invoke(Unknown Source)
    at com.bea.alsb.console.test.TestServiceClient.invoke(TestServiceClient.java:174)
    at com.bea.alsb.console.test.actions.DefaultRequestAction.invoke(DefaultRequestAction.java:117)
    at com.bea.alsb.console.test.actions.DefaultRequestAction.execute(DefaultRequestAction.java:70)
    at com.bea.alsb.console.test.actions.ServiceRequestAction.execute(ServiceRequestAction.java:143)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
    at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
    at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
    at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
    at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
    at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
    at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
    at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
    at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
    at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
    at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
    at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
    at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
    at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
    at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
    at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
    at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
    at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
    at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
    at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
    at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
    at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
    at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
    at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
    at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
    at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
    at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/file/FileReadService [ SynchRead_ptt::SynchRead(Empty,body) ] - WSIF JCA Execute of operation 'SynchRead' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileReadInteractionSpec due to: oracle.tip.adapter.file.outbound.FileReadInteractionSpec; nested exception is:
    java.lang.ClassNotFoundException: oracle.tip.adapter.file.outbound.FileReadInteractionSpec; nested exception is:
    oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileReadInteractionSpec due to: oracle.tip.adapter.file.outbound.FileReadInteractionSpec; nested exception is:
    java.lang.ClassNotFoundException: oracle.tip.adapter.file.outbound.FileReadInteractionSpec
    at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:263)
    at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
    Regards,
    Abhinav

  • Reciever File Adapter - Temp File Name Scheme using Variable Substitution

    How can I create a temporary file that uses variable substitution? 
    We are having a problem with files merging when we write files using the "Use Temporary File" setting on the FIle Adapter.  So two independent files are merging into a single file.  We are not using the "Append" setting.
    We would like to use a Temp File Name Scheme that would append the message id onto the temporary file name. 
    Using variable substitution we created a msgid variable.  When added to the temporary file name using %msgid% the temporary file name is created with %msgid% in the name instead of the actual message id.  We put the variable into the "File Name Scheme" as well and the end completed file used the message id in the name.
    Any Ideas?
    Thanks,
    Matt

    HI Matthew,
    Why are you adding the message id into the temporary file??
    I understand that you want the output of the filename to contain message id .. and hence you are using variable substitution for the same.
    Temporary file name will anyways get overwritten by the actual file name (here the actual filename will be using variable substituion).
    So i suggest to achieve your scenario you can add any name in the temporary file and maintain the desired filename you require as output in the variable subsititution.
    Temporary File Name option actually acts as a lock - unlock mechanism from PI side while the file is getting written to the file server so that while PI is writting the file no third party application batch program picks it up.
    I hope this helps.
    Cheers
    Dhwani

  • File Adapter: Dynamic file name

    Hello,
    I would like to use a filename like this:
    Name.<DOCNUM>.Direction.<Timestamp>
    For DOCNUM I use variable substitution. Works fine.
    For <Timestamp> I need a different format as the timestamp function
    in file adapter create. So I try to set up my timestamp in mapping like
    dynamic file name:
    DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Timestamp");
    conf.put(key1, a);
    Input a is date function which creates my desired timestamp format. In file adapter I try this:
    Name.%DOCNUM%.Direction.%Timestamp%
    or
    Name.%DOCNUM%.Direction.Timestamp
    or
    Timestamp
    all doesn't work for Timestamp.
    So is there a possibility to configure a dynamic filename like this???
    Is there a possibility to access dynamic configuration variables in dynamic filename except
    the known for filename and directory??
    thanks
    chris
    Edited by: Christian Riekenberg on Mar 10, 2009 4:02 PM
    Edited by: Christian Riekenberg on Mar 10, 2009 4:05 PM

    your file name needs to be
    Name.<DOCNUM>.Direction.<Timestamp>
    dont use variable substitution. use only dynamic configuration and set the file name
    introduce a logic that will create the string
    Name.<DOCNUM>.Direction.<Timestamp>
    eg. String filename = "Name" + var_docnum + "Direction" + var_timestamp;
    then use the dynamic conf code to set the file name and use adapter specific properties in you adapter to retrieve it.
    Ref:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

  • XI Receiver file adapter : Dyanmic File PATH

    Hi,
    Appreciate if someone could help me on the issue below:
    I have a receiver File adapter with a dynamic target directory as per below:
    Target directory: /test/YYYY/MM/DD
    the value for YYYY (Year) , MM (Month) and DD (Date) will be the date when the file being transfered from the sender.
    Appreciate if someone could help me to achieve this. I know we can use the variable substitution however it doesn't allow us to set a systems field such as sy-datum.
    Cheers,
    ZAB

    Hi,
    Populate this value in your payload , and then use Dynamic File Name concept of File Adapter.
    The dynamic filename generation concept is as follows.
    In your filename field. just give a variable with % symbols. (eg: %file% ).
    Now, under the option Variable Name Substitution, you can give how the value has to be created.
    It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
    For the former, your give
    message:interface_name ,etc
    and for the payload part you give,
    Payload: "your element root which u wanna acecss"
    Just check this link out,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    And read the contents under variable substitution and it will help you understand the concepts better.
    If you have any clarifications, do get back,
    Regards,
    bhavesh

  • Receiver File Adapter - Create File on another SAP System

    I am working on a project that includes this requirement:  PDF files to be copied from a third party company via SFTP to a directory on our ECC system.
    We have worked out the sender side config, and the transfer of the files into PI works fine via SFTP.
    However, the PDF files are ending up in a directory on the PI system and not on our ECC system as expected.
    The receiver communication channel is set up as follows:
    Party = blank
    Communication Component = communication component of the ECC business system
    Adapter type = File
    ('Receiver' is ticked)
    Transport Protocol = File System (NFS)  (etc)
    Target directory = /tmp   (using this temporarily for testing)
    I would have thought using the ECC business system would mean the files would end up on that system, but instead they end up on the /tmp directory on the PI system.
    We are not permitted to use FTP between our SAP systems, so I can't go with that option.
    I've searched for help on this and only see conflicting and vague statements about whether the NFS protocol can or can't be used for transfer to another SAP system in the landscape. 
    Any suggestions and help on the above, and the best method of transferring the files to the end SAP system would be very appreciated.
    Regards,
    Christine

    remember that NFS means that it is referring to a file system on PI server.
    What you could do is mount a space on SAP PI onto SAP ECC so that ECC will be able to access the files on SAP PI.
    Guess that should solve the problem.

  • Receiver File Adapter with File content Conversion

    I have a requirement to send 2 different files to the target directory. Source is the same and different mapping for the 2 files.
    This I can achieve through multi-mapping but there is a problem. How can I use the File content for receiver File adapter which is using Multimapping.
    The structure of the 2 files also different.

    Why would you need FCC on receiver file adapter? If you need different files to be generated from the source, you could create two receiver channels with different mappings and just add them to the same Receiver Detemination. Isn't feasible?

  • XI File Adapter Custom File Encoding for  issues between SJIS and CP932

    Dear SAP Forum,
    Has anybody found a solution for the difference between the JVM (IANA) SJIS and MS SJIS implementation ?
    When users enter characters in SAPGUI, the MS SJIS implementation is used, but when the XI file adapter writes SJIS, the JVM SJIS implementation is used, which causes issues for 7 characters:
    1. FULLWIDTH TILDE/EFBD9E                 8160     ～     〜     
    2. PARALLEL TO/E288A5                          8161     ∥     ‖     
    3. FULLWIDTH HYPHEN-MINUS/EFBC8D     817C     －     −     
    4. FULLWIDTH CENT SIGN/EFBFA0             8191     ￠     \u00A2     
    5. FULLWIDTH POUND SIGN/EFBFA1            8192     ￡     \u00A3     
    6. FULLWIDTH NOT SIGN/EFBFA2              81CA     ￢     \u00AC     
    7. REVERSE SOLIDUS                             815F     ＼     \u005C
    The following line of code can solve the problem (either in an individual mapping or in a module)
    String sOUT = myString.replace(\u0027～\u0027,\u0027〜\u0027).replace(\u0027∥\u0027,\u0027‖\u0027).replace(\u0027－\u0027,\u0027−\u0027).replace(\u0027￠\u0027,\u0027\u00A2\u0027).replace(\u0027￡\u0027,\u0027\u00A3\u0027).replace(\u0027￢\u0027,\u0027\u00AC\u0027);
    But I would prefer to add a custome Character set to the file encoding. Has anybody tried this ?

    Dear SAP Forum,
    Has anybody found a solution for the difference between the JVM (IANA) SJIS and MS SJIS implementation ?
    When users enter characters in SAPGUI, the MS SJIS implementation is used, but when the XI file adapter writes SJIS, the JVM SJIS implementation is used, which causes issues for 7 characters:
    1. FULLWIDTH TILDE/EFBD9E                 8160     ～     〜     
    2. PARALLEL TO/E288A5                          8161     ∥     ‖     
    3. FULLWIDTH HYPHEN-MINUS/EFBC8D     817C     －     −     
    4. FULLWIDTH CENT SIGN/EFBFA0             8191     ￠     \u00A2     
    5. FULLWIDTH POUND SIGN/EFBFA1            8192     ￡     \u00A3     
    6. FULLWIDTH NOT SIGN/EFBFA2              81CA     ￢     \u00AC     
    7. REVERSE SOLIDUS                             815F     ＼     \u005C
    The following line of code can solve the problem (either in an individual mapping or in a module)
    String sOUT = myString.replace(\u0027～\u0027,\u0027〜\u0027).replace(\u0027∥\u0027,\u0027‖\u0027).replace(\u0027－\u0027,\u0027−\u0027).replace(\u0027￠\u0027,\u0027\u00A2\u0027).replace(\u0027￡\u0027,\u0027\u00A3\u0027).replace(\u0027￢\u0027,\u0027\u00AC\u0027);
    But I would prefer to add a custome Character set to the file encoding. Has anybody tried this ?

Maybe you are looking for