Problems with refreshing a adf table

Hi,
i am using jdeveloper 11 with the new adf framework.
I use a table which i bind to an arraylist. works fine. the table shows the data from the list.
at sometime i change the backing arraylist but the table show (only in the section i saw on the screen) the old data, when i scroll down the new data is shown.
so i know the arraylist holds the new data and the binding is ok but the refresh of the table doesnt work in the section i see....
hope you understand my problem
hannes

Hi,
As far as I understand , you are not clearing the previous or old data. This results in your table showing the new data towards the end.
If you are using something like this : List tableRows = new ArrayList(); to populate the data in the table , ensure that you clear this list everytime you method runs
You can do this by : tableRows.clear()
HTH
-Shishir

Similar Messages

Problems with RowSelection in adf table

I have problems with selection of a row in a adf table. Even though I have set the property : rowSelection="single" , when i select a row, the two other rows that follow, get selected too. For example I have 10 records an when i select the 7th row, the 8th and 9th row are also selected. This doesn't happen with the first rows.
Also when i evaluate an attribute on selectionListener, it is always getting just the one from the first row.
<f:facet name="second">
<af:panelBox id="pbCon" showDisclosure="false" text="Históricos"
binding="#{pageFlowScope.HistoricoEnvios.pbCon}">
<af:table var="row" summary="Histórico de envios"
rows="#{bindings.VOHistoricoEnvios.rangeSize}"
emptyText="#{bindings.VOHistoricoEnvios.viewable ? 'No se encontraron resultados.' : 'Access Denied.'}"
fetchSize="#{bindings.VOHistoricoEnvios.rangeSize}"
rowBandingInterval="0" id="tHist"
disableColumnReordering="true"
value="#{bindings.VOHistoricoEnvios.collectionModel}"
binding="#{pageFlowScope.HistoricoEnvios.thist}"
rowSelection="single">
<af:column width="32" id="c13" align="center"
headerText="#{bindings.VOHistoricoEnvios.hints.Rownum.label}"
rowHeader="unstyled">
.

I have two panelBox, one for a set of options with commandMenuItem and the second one wich shows the result in a table. The first commandMenuItem generate records an show them in the table. Here i got no problem with selection. The third commandMenuItem execute a log of the records generated, here is the problem.
Thes two pages are part o a template, the template has a panelSpliter, in the right are the set of commandMenuItem an in the second is the part that i can edit.
I have also drag an drop from the datacontrol again and have the same result
The table that shows the records is :
<af:panelTabbed id="ptReg" styleClass="AFStretchWidth"
visible="true"
binding="#{pageFlowScope.EnvioSunasa.ptReg}"
partialTriggers="::dpEnv">
<af:showDetailItem text="Datos Personales" id="sdiDp"
stretchChildren="first"
inflexibleHeight="100">
<af:panelSplitter id="psDP" orientation="vertical"
splitterPosition="216">
<f:facet name="first">
<af:panelBox id="pbErrDP"
text="Registros con Error:#{pageFlowScope.EnvioSunasa.numRegErrDP}"
showDisclosure="false">
<af:table var="row" summary="Errores Datos Personales"
rows="#{bindings.VOErrDatosPersonalesAfiliado1.rangeSize}"
emptyText="#{bindings.VOErrDatosPersonalesAfiliado1.viewable ? 'No se encontraron errores.' : 'Access Denied.'}"
fetchSize="#{bindings.VOErrDatosPersonalesAfiliado1.rangeSize}"
rowBandingInterval="0" id="tErrDp"
disableColumnReordering="false"
value="#{bindings.VOErrDatosPersonalesAfiliado1.collectionModel}"
rowSelection="single"
binding="#{pageFlowScope.EnvioSunasa.terrDp}">
.

Problem with refresh issue in Table Overflow Area for LOV in edit mode

Hi Friends,
I am facing a problem with LOV if i keep this in Table Overflow area,
When i select a Employee name from the List of Value clicking on select button it will not refresh the lov to display the currently selected Employee Name, but if i click on show and hide link of Table overflow the selected employee name will be displayed.
But the if move the same lov item from Table Overflow area to Table layout it works fine.
I tried my best to look into this but i could not, can any one suggest me what i need to do for this refresh issue.
Regards,
Rahul

Hello Rahul,
Strange, it's working for me.
I assume you added Employees as reference entity to your updatable entity in your ViewObject.
Did you uncheck "Key attribute" in EmployeeId of your reference entity?
Anything in the log?
Groeten,
HJH

Problem with JDev 10g ADF table component and rangeChangeListener

Hi,
I'm populating an ADF table component from a backing bean and would like the range of rows be changed using custom method on the backing bean.
I have declared table on page as shown below and the table is populated correctly. However the onRangeChanged method in the backing bean never fires when
user hits previous or next. Any ideas of what I missed ?.
Thanks,
Kenneth
<af:table emptyText="No items were found"
value="#{companySearchBean.companies}"
var="company" rows="20"
first="#{companySearchBean.firstCompany}"
rendered="#{companySearchBean.queryExecuted}"
rangeChangeListener="#{companySearchBean.onRangeChanged}">
<af:column sortable="false" headerText="Company Name">
<af:outputText value="#{company.partyName}"/>
</af:column>
<af:column sortable="false" headerText="Party Number"
formatType="number">
<af:outputText value="#{company.partyFileNo}"/>
</af:column>
</af:table>

Hi,
I'm populating an ADF table component from a backing bean and would like the range of rows be changed using custom method on the backing bean.
I have declared table on page as shown below and the table is populated correctly. However the onRangeChanged method in the backing bean never fires when
user hits previous or next. Any ideas of what I missed ?.
Thanks,
Kenneth
<af:table emptyText="No items were found"
value="#{companySearchBean.companies}"
var="company" rows="20"
first="#{companySearchBean.firstCompany}"
rendered="#{companySearchBean.queryExecuted}"
rangeChangeListener="#{companySearchBean.onRangeChanged}">
<af:column sortable="false" headerText="Company Name">
<af:outputText value="#{company.partyName}"/>
</af:column>
<af:column sortable="false" headerText="Party Number"
formatType="number">
<af:outputText value="#{company.partyFileNo}"/>
</af:column>
</af:table>

Problem with refresh of snapshot

I am facing one problem with refresh of a snapshot. In the front end (developed in D2K) there is a PL/SQL code written which loops through user_snapshots and refreshes each snapshots one by one.
With one particular snapshot its giving the error. I traced the session and found the problematic snapshot. I tried to refresh the same snapshot with some other user with DBA role granted to it and its working fine.
Now I logged in to SQL Plus with the user Z0000 ( This is the user with which the application user logs in to the application) and tried to rerfresh the snapshot. Its giving me ORA-03113 end-of-file on communication channel. Then I granted DBA role to user Z000 and then tried to refresh its again giving the same error.
I tried with many different users and its working fine.
Any ideas where could be the problem.
Thanks
Sidhu
Database is 10gR2 on AIX 5.3
Message was edited by:
Sidhu

Hi,
did you try to do it locally?
Maybe a possible problem on the network.
This issue remembers me a bug on older versions.
It is strange on a 10.2
Acr

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Problem with Emailing the Internal table data as an excel attachment

Hi Friends,
I am facing problem with Emailing an internal table data as an excel file. I am using standard function module "SO_NEW_DOCUMENT_ATT_SEND_API1" which is using SOLI structure can have record with 255 character length. But my Internal table having each record means after concatenating all the fields it is going to be morethan 450 characters. so i t is not displaying all the data in excel file.
Can somebody help me if there is any other function module or any other way that i need to follow.
thanks for help
venkat.

You must use the the :
CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB as a field seperator and
CL_ABAP_CHAR_UTILITIES=>CR_LF as a record seperator.
Check this example:
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
Regards,
Naimesh Patel

Single-row refresh in ADF tables, with PPR

Hello everybody. I have an application in JDeveloper 11gR2 environment.
Here are my requirements:
1. I have a table, each cell is an input text;
2. Some cell must be rendered differently depending on a specific key-field (for example, input or output text)
3. Any manual change in the key-field must result in a re-rendering of the interested row, not the entire table.
I addressed req 2 using an af:switcher which renders either a facet or another, evaluating the key-field.
About req 3, I tried to set auto-submit to true on key-field and then specifying partialTriggers="key-field-id" in the column component including the switcher.
It works, with 2 issues:
a) the main one: it refreshes the entire table (which simply disappear/reappears when I tab out of the key-field);
b) the second one: I'd prefer not to use the auto-submit 'cause I don't want to submit anything, yet: I just want to change rendering/values of other cells.
Any idea?
Thanks a lot,
Emanuele

Hi,
I addressed req 2 using an af:switcher which renders either a facet or another, evaluating the key-field.
I would have used an af:inputText field and set the readOnly property to true for the read only fields. This can be done through EL
About req 3, I tried to set auto-submit to true on key-field and then specifying partialTriggers="key-field-id" in the column component including the switcher.
It works, with 2 issues:
You cannot just refresh a single row. The table is stamped at rendering, which means individual rows are not represented by their own object
Frank

Problem with PPR in ADF

I have a problem with Partial Page Refreshing in ADF faces. what my requirement is I have Table with two cells. One cell contains the ADF Tree component. This tree component can expand their children. If you click any of the tree component then the details of that component displayed on the another cell. I want to display contents with out refreshing the entire page.

let`s give you what i did :
I adding two dataPage ,First one for browse employee and second one for deleting an employee .
So, i did same what is write in a bove link for deleting
but when i run it :
first browse the employee
Then when click the link of delete it is go to DataPage that`s name( Delete employee) .So , when click the button delete
it is return to the first DataPage(browse employee)
and you will see that row is deleting but when go to the DataBase
you will see the row not Deleting.

Refresh a ADF Table?

Hi to all
I have a adf faces table who take his data from toplink, if i update a row directly on the table via an oracle client, when i refresh the page the old data still be rendered and the table is not refreshed. I mean, the page is refreshed, but the data in the table still being the old data. Then, if the data in the database is altered, how can i refresh my table to show the new data with the needed of close my browser and open it again?
Thanks in advance!

Hi! I have a similar problem with table as posted in the following thread:
Help needed! ADF Data Control: Navigation Buttons + Table issue.
As you can see, I've got no response and it's still unsolved.
Hope you get a better luck!
Regards,
Gustavo

Problem with trigger and mutating table

Hello,
I have a problem with the following trigger. Everytime it starts I got an error message:
ORA-04091: table ccq_test.QW_QUALIFIER is mutating, trigger/function may not see it
ORA-06512: at "QW_AFTER_UPDATE_ALL", line 3
ORA-06512: at "QW_AFTER_UPDATE_ALL", line 10
ORA-04088: error during execution of trigger 'QW_AFTER_UPDATE_ALL'
Here is the trigger:
CREATE OR REPLACE TRIGGER qw_after_update_all
AFTER UPDATE ON ccq_test.QW_QUALIFIER FOR EACH ROW
DECLARE
     CURSOR c1 IS SELECT id AS mx FROM QW_QUALIFIER_LOG WHERE msgid = :NEW.msgid AND messagedate BETWEEN SYSDATE - (1 / (24 * 60 * 6)) AND SYSDATE AND transfer = 1;
     CURSOR c_qwprod IS SELECT value FROM ccq_test.QW_QUALIFIER WHERE msgid = :NEW.msgid AND name = 'product';
     CURSOR c_qwgesch IS SELECT value FROM ccq_test.QW_QUALIFIER WHERE msgid = :NEW.msgid AND name = 'geschaeftsfall';
     qw_rec c1%ROWTYPE;
     qw_prod c_qwprod%ROWTYPE;
     qw_gesch c_qwgesch%ROWTYPE;
BEGIN
OPEN c1;
OPEN c_qwprod;
OPEN c_qwgesch;
     FETCH c1 INTO qw_rec;
     FETCH c_qwprod INTO qw_prod;
     FETCH c_qwgesch INTO qw_gesch;
     IF c1%NOTFOUND THEN
          IF (:NEW.name = 'product') THEN
               INSERT INTO QW_QUALIFIER_LOG VALUES (QW_QUALIFIER_LOG_SEQ.NEXTVAL, :NEW.msgid, :NEW.value, qw_gesch.value, SYSDATE, 1);
          ELSE
          INSERT INTO QW_QUALIFIER_LOG VALUES (QW_QUALIFIER_LOG_SEQ.NEXTVAL, :NEW.msgid, qw_prod.value, :NEW.value, SYSDATE, 1);
     END IF;
     ELSE
          IF (:NEW.name = 'product') THEN
               UPDATE QW_QUALIFIER_LOG SET product=:NEW.value, messagedate=SYSDATE WHERE id = qw_rec.mx;
          ELSE
               UPDATE QW_QUALIFIER_LOG SET geschaeftsfall=:NEW.value, messagedate=SYSDATE WHERE id = qw_rec.mx;
     END IF;
     END IF;
CLOSE c1;
END;
Can anyone help me?

You are trying to lookup data from qw_qualifier you are currently modifying. You could see the data in a inconsistent way and Oracle is protecting you from it.
You could read here about how to program around this problem.
But: your table design seems questionable. You have two records for qw_qualifier and you are trying to log it into one qw_qualifier_log record. Maybe you could fix that, and the need for querying the same table as you are updating is removed.
Regards,
Rob.

Problem with MultiLeadSelection in a table

Hi All,
I am still having the problem with the multilead selection in a table.
I am setting the table properties to multi and I have an event handler for the onaction property, named as leadselection.
I am writing the code below for the event handler.
public void onActionLeadSelect(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
int selectedRow = firstNode.nodeOPENITEMS_open().getLeadSelection();
    int sizeOfOpen = wdContext.nodeOPENITEMS_open().size();
     IOPENITEMS_openElement element = (IOPENITEMS_openElement)firstNode.nodeOPENITEMS_open().getElementAt(selectedRow);
     for(int i=0;i<wdContext.nodeOPENITEMS_open().size();i++){
          if(wdContext.nodeOPENITEMS_open().isMultiSelected(i)||selectedRow == i){
               wdContext.currentContextElement().setMultiDocNumber(wdContext.nodeOPENITEMS_open().getOPENITEMS_openElementAt(selectedRow).getDOC_NO());
               wdContext.currentContextElement().setMultiItemno(wdContext.nodeOPENITEMS_open().getOPENITEMS_openElementAt(selectedRow).getITEM());
               wdContext.currentContextElement().setMultiRepItem(wdContext.nodeOPENITEMS_open().getOPENITEMS_openElementAt(selectedRow).getREP_ITEM());
               wdContext.currentContextElement().setMultiSubitem(wdContext.nodeOPENITEMS_open().getOPENITEMS_openElementAt(selectedRow).getSUB_ITEM());
What i am trying to do is..On multiselection or on single leaad selection, I should pass the whole amount to the BAPI or the amount related to only the leadselection.
But when I am trying to run..this code..I am nt able to select in a multiple way..and more over if I press ctrl then I am able to make the other rows highlighted with orange color..but not normally and after making them highlighted also i am not able to pass the amount for all the selected rows..together..
Kindly suggest me..something..
Regards
DK

Hi,
Try this ,
for(int i=0;i<wdContext.nodeOPENITEMS_open().size();i++){
if(wdContext.nodeOPENITEMS_open().isMultiSelected(i)){
wdContext.currentContextElement().setMultiDocNumber(wdContext.nodeOPENITEMS_open().getOPENITEMS_openElementAt(i).getDOC_NO());
wdContext.currentContextElement().setMultiItemno(wdContext.nodeOPENITEMS_open().getOPENITEMS_openElementAt(i).getITEM());
wdContext.currentContextElement().setMultiRepItem(wdContext.nodeOPENITEMS_open().getOPENITEMS_openElementAt(i).getREP_ITEM());
wdContext.currentContextElement().setMultiSubitem(wdContext.nodeOPENITEMS_open().getOPENITEMS_openElementAt(i).getSUB_ITEM());
If you use the selectedRow variable in if condition, it will fetch only one row from table. Because the getLeadSelection() method gives the number of row which got selection on first click before pressing Ctrl key. So you can get only one value for leadselect. that's why the if loop failure for other selected rows.
regards
karthik

Issue with SelectOneChoice in ADF Table

Hi,
I am trying to create ADF table with a editable columns, one with InputBox and another with SelectionOneChoice. InputBox is working fine but for SelectOneChoice its not populating the value passed to it.
The values of SelectOneChoice are coming from JavaClass. Accesing the list through pageFlowScope.
Code:
*<af:column sortProperty="sponsorPercentage" sortable="false"*
*headerText="#{bindings.sponsor1.hints.sponsorPercentage.label}"*
*id="c11">*
*<af:inputText label="Label 1" id="it5"*
*value="#{row1.sponsorPercentage}"/>*
*</af:column>*
*<af:column id="c1" headerText="Sponsor Status">*
*<af:selectOneChoice label="Label 2" id="sStatus" value="#{row1.sponsorStatusDesc}"*
*validator="#{backingBeanScope.EditSponsorDetails.OnSponsorStatusChange}">*
*<f:selectItems value="#{pageFlowScope.confLists.spStatus}"*
*id="si1"/>*
*</af:selectOneChoice>*
*</af:column>*
In the first column i can see the date in InputBox. But in second column where i am using SelectOneChoice i cannot see data. I can see list of values in SelectOneChoice but unable to populate the data passed to it.
Any idea what i am missing over here?
Thanks in Advance
Regards
Thoom.

This is my code:
<af:column id="c1" headerText="Sponsor Status">
<af:selectOneChoice label="Label 2" id="soc1" value="#{row1.sponsorStatusDesc}"
validator="#{backingBeanScope.EditSponsorDetails.OnSponsorStatusChange}"
valuePassThru="true">
<f:selectItems value="#{pageFlowScope.confLists.spStatus}"
id="si1"/>
</af:selectOneChoice>
</af:column>
and this i what HTML code says..
<select id="confSponsor:r2:0:tbIEEEsp:0:soc1::content" class="x2h" name="confSponsor:r2:0:tbIEEEsp:0:soc1">
<option _adftmpopt="t" value="" title=""></option>
<option value="4" title="Approved">Approved</option>
<option value="3" title="Declined">Declined</option>
<option value="6" title="New">New</option>
<option value="2" title="Not Valid">Not Valid</option>
<option value="5" title="On Hold">On Hold</option>
<option value="1" title="Pending Approval">Pending Approval</option>
<option value="7" title="Unidentified">Unidentified</option>
</select>
Stll i cannot see any value populated in SelectOneChoice

Performance problem with query on bkpf table

hi good morning all ,
i ahave a performance problem with a below query on bkpf table .
SELECT bukrs
           belnr
           gjahr
      FROM bkpf
      INTO TABLE ist_bkpf_temp
     WHERE budat IN s_budat.
is ther any possibility to improve the performanece by using index .
plz help me ,
thanks in advance ,
regards ,
srinivas

hi,
if u can add bukrs as input field or if u have bukrs as part of any other internal table to filter out the data u can use:
for ex:
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
WHERE budat IN s_budat
    and    bukrs in s_bukrs.
or
SELECT bukrs
belnr
gjahr
FROM bkpf
INTO TABLE ist_bkpf_temp
for all entries in itab
WHERE budat IN s_budat
    and bukrs = itab-bukrs.
Just see , if it is possible to do any one of the above?? It has to be verified with ur requirement.

Problem with the regeneration of Table Maintenance

My Scenario is like this.
I have to add a Long Description with a length of 4000 Charecters. For this I have created in my Z TAble ZINT INT2 5 and ZZLONG_DESC LCHR 4000. I have activated the ZTABLE. I have Adjusted & Activated the Database by using Data Base Utility. I have regenerated the Table Maintenance (SM30), here my concern is I am not able to see the ZZLONG_DESC Field for Value Entry. I have seen all other Fields are ready for input, except this field. How do you achieve this.
What ever I will type in ZZLONG_DESC, when I say SAVE it should be available in ZTABLE.
How to read the Long TExt for 4000 charecters, is it possible using the Function Module "READ_TEXT". Please suggest me.
Thanks & Regards,
Sivaram Kandula

Hi Sivaram,
Yes, there is a problem with fields of long lengths. But, can I know exactly what type of table maintenance u have generated? Is it a one step or a two step? I suggest you to go ahead with creation of two step table maintenance. Then you will definitely see that in the second screen means, when you click on "New Entries" you should be able to see it. Plz have a try at this and let me know with the update. Hope this should work out.
Otherwise, better to go with Text table concept. Hope you got it.
Thanks,
Adithya K
SAP Practise.
Note: Reward points for the helpful answers.

Problems with refreshing a adf table

Similar Messages

Maybe you are looking for