Question about f77 Forte Developer 6

Hi. I have a fortran program that runs on Irix 6.4
I need to compile & run it on a solaris 8 system.
Does anybody know which option is the equivalent to the -static option in Irix 6.4 ?
or which option in forte developer 6 is able to statically allocate a local variable & initialize them to zero.
-static (option in C compiler of Irix 6.4)
Cause all local variables to be statically allocated. Statically allocated local variables are initialized to zero and exist for the life of the program. This option is usually needed for programs ported from older systems (e.g. VMS) where all variables are statically allocated.
any help is apreciated
Raul

-stackvar
All local variables are allocated on the stack whenever possible. And they are implicitly initialized to zero unless declared with an initial value.
Just be sure you've allocated a big enough stack.
Default stacksize is 8 Mb for the main stack and
4Mb for each thread stack (8Mb on SPARC V9 platforms).
The User Guide shows how to set main and thread
stack sizes.
http://docs.sun.com/db?p=/doc/806-7988

Similar Messages

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

A few questions about Group Policy development

This post was originally in the Windows Development forum. Please note the following:
This question is not about the application and management of GPOs. It's about how to develop a group policy.
I know about Group Policy Preferences, please do not provide this as an answer.
I create a custom group policy for an application.
Recently the application developers allowed settings to be controlled via policy registry keys, in order to make these settings easier to set for Systems Administrators I have created a GPO. Unfortunately, there aren't that many resources
I can find that help with Group Policy creation, so:
Is there an easier way to create and edit admx/adml files rather than just a xml editor? Like a GUI front end?
The vast majority of this applications settings are just a simple Boolean, is there any way to just use one base presentation element for multiple policies? or do I really have to create a presentation element for every single policy? :/
As mentioned above, most settings are a simple Boolean, but with an additional enforce parameter. If you "enforce" the setting the user is blocked from changing the value. I was going to peg the setting Boolean to whether the policy was
Enabled or Disabled and have an enforce check box in the policy itself (this would make it easier to just glance at the configured settings and get an idea). Unfortunately, when you disable a policy you cannot interact
with its contents, so the enforce check box cannot be toggled. So I have two options:
Have two policies for each setting eg: Disabled: Load printer settings with the document and
Enabled: ENFORCE Load printer settings with the document
OR what I have elected to do is just have the one policy with 2 check-boxes in it, one for the setting and one for the enforcement
The former is both more complex to write for me and more time consuming to configure for the Administrator, the later is easier for me to write but still annoying to use. So my final question is: can I make it so, even though a policy is disabled, you can
still toggle settings within the policy?

Hi Thomas.
> (this will set the default in the application) and then toggling whether
> that setting is Enforced (unable for the user to modify it - disabling
> it in the user interface).
As said - that's not how policies are intended to work - they are always
enforced. You are talking about preferences that have an optional
"enforce" switch :) But doesn't matter for the remainder of this post.
> 1. The presentation table contains hundreds of presentation tags that
>    essentially are the same thing. From your response there is no way
>    to make the GPO any easy to write? I can't just create one generic
>    presentation that multiple policies can use? I have to create a
>    presentation for every. single. policy.?
I'd sugggest to use ADM instead of ADMX. Much easier to write and
maintain, and copy/paste works very well in ADM :)
https://msdn.microsoft.com/library/bb742499.aspx
> 2. Because of how the settings are set, as mentioned in my earlier
>    post, I have chosen to have each policy contain two check boxes.
>    Each setting could be set to the following:
> 1. True
> 2. False
> 3. True and Enforced
> 4. False and Enforced
What elements you need depends on the registry values your application
is expecting/checking. I'd suggest a radio button (enabled/disabled) and
a check box "enforced".
>    there a way for a Disabled policy to also have settings that can be
>    modified in Group Policy Management? Or can only Enabled policies be
>    modified?
You cannot edit what a disabled GPO does, but you can define it
(VALUEOFF in ADM files if I recall correctly).
>    well because it would make it easier for them to read the GPO. But I
>    think you are saying this is not possible.
Yes, it isn't. It still - at least to me - is a slight misunderstanding
of "preferences" versus "policies" :)
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Question about Java programming development

There are five phases in java program development. They are: edit -> compile -> load -> verify -> execute
However, every time I develops program. I only experience phase 1, phase 2 and phase 5. I always miss phase 3 and 4. When do the class loader and bytecode verifier work? How do they work?
Second question, how the legitimate programs can execute automatically without typing command java to invoke the interpreter?

lighthero wrote:
I still have some questions.
1. I want to run the program just like the commercial software such as Adobe and MS Office.(just double click to run the program.) How do I execute a java program without typing command java every time?Create an executable JAR: [http://java.sun.com/docs/books/tutorial/deployment/jar/index.html]
>
2. How does the JIT compiler work?[http://www.google.ca/search?q=Java+JIT]

Question about doing application development against older versions of Access

I'll be working on a MS Access 2007 application written by someone else, whose no longer here. I've no experience writing MS Access applications, however I've used MS Access several times through the years as a desktop database. Therefore I know it's possible
to open an older Access database, say Access 2007, with a newer version of Access. You can bring up tables, query definitions, etc. and do normal database things in newer versions of Access against older .mdb's or .accdb's.
What I don't know is if it is possible to also do development against older versions of Access. Can I have MS Access 2013 on my development PC, but open a MS Access 2007 database with the Access application in it, and do development? Or will Access 2013
insist that I upgrade the older database file to Access 2013?
Rod

One can definitely open and use it with Access 2013 (note - we haven't gotten to 'develop' it yet.....)
Generally an app written with the 2007 edition is going to be a .accdb file - but it is possible it is the older .mdb file format.
In development is your issue; the latest edition has newer features that the older edition can't possibly know about. Nothing unique about Access on this point. It just is. So if you invoke any of those - then you'll lose your backward
ability as a 2007 user won't be able to open it.
I definitely have tried to open an app in 07 only to receive a 'not recognized' type error message - and moved that app over to my 13 machine where it opened fine....and was never able to find which feature unique to 13 was the culprit....
So if you tread cautiously you can be okay - and while I think I know the features that differentiate the products, I still prefer to play it safe and do all development in the edition that is used.

Questions about the sql developer 2.1

first sorry for my poor english, I am very happy to see the sql developer 2.1.but here ,it has a very serious problem.
usually, I used to saving some common sql statements into a sql file. and when need to do something , I just need to open the file with oracle sql developer, and excute the sql statements.
but when I do this with sql developer 2.1, the excute sql button is not activated , the icon is gray ,so I can't excute any sql statement in the file, and I should open a new sql worksheep and type the sql statements to excute it. what's the matter?
thanks!

When opening a script, sqldev logically doesn't know under which connection you want to run the statements.
Just select the connection you want using the drop-down box in the upper right of the script tab's toolbar, and all buttons will get enabled.
Have fun,
K.

I have a question about Microsoft Outlook development ... ??

Hi every expert:
If I click any mail address (TO/ CC/ BCC) in outlook mailItem. Then I want to get mail address which is be clicked. How can I do??
Pls help me to resolve it ... Thanks.

Hello Will,
The
Recipients property of the MailItem class returns a Recipients collection
that represents all the recipients for the Outlook item. The
Type property of the Recipient class returns one of the following OlMailRecipientType constants: olBCC, olCC, olOriginator,
or olTo.
You can use the Address or
AddressEntry property of the Recipient class to get the email address. The Address property returns a string representing the e-mail address of the Recipient.
Also you may be interested in the
GetSelectNamesDialog method. The SelectNamesDialog object supports displaying the Select Names dialog
box for the user to select entries from one or more address lists in the current session.

Hello , how r u, can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my

hello , how r u,
can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my machine cant upadte on 1.8 n 10.9,, ihave 2gb ram . core 2 duo pr, plz rely asap,
thnxs

Please type complete sentences and words. This isn't an instant message program.
https://developer.apple.com/support/ios/ios-dev-center.html

Sql developer: question about exporting data

Hi,
we're recently working with sql-developer. i've got a question about how we can export query results to txt/csv files for use in other applications.
First a problem: if we start a query that looks like this:
select * from
select * from A where start_date = &date
) a,
select * from B where start_date = &date
) b
where a.name = b.name
Sql-developer asks twice to input a value for the variable 'date', although it's the same variable and it's supposed to have the same value.
We solve this by making a script:
first we define the variable, then we put the query.
When we start the script, the query runs ok and sql developer asks to input the value for the variable once.
But now the result of the query is shown in the script output. The script output seems to be limited in number of lines and difficult to export.
So my question is: what's the best way to export query results to txt/csv files, avoiding the problem mentioned above?
i hope there is a solution where we can use a single query or script.
Thanks in advance!

Using bind variables like ":date" should solve the problem of being asked twice for the same thing.
Executing the query normally (F9), gives you the export options you require through the context menu inside the Results grid.
Regards,
K.

Questions about free Download Oracle 10g, Database and Developer suite

Hi everyone, got some questions..
1) Is it possible to download free Oracle 10g and Developer suite? is a 30 day license trial or something like that?
2) On windows systems which are the minimun requirements?, for example in a Pentium 4, 512Mb RAM, Windows XP Home edition is OK?
3) Should I download Standard Edition? Personal?
4) If I am trying to update my Oracle Developer knowledge (I was developer on 1999 with Oracle 7.3 and Developer 2000) what products do I have to install?? Oracle DB 10g, Developer Suite,Application Server too?, what else?
Thanks guys!
J.

My answer you could find here Questions about free download Oracle 10g, Developer Suite

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Follow-up question about forms and SharePoint Online

I asked a question about life after InfoPath earlier, and got a good answer:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fb23b3d9-8a09-4267-aab5-09929f6a3082/life-after-infopath-seeking-advice
After looking at all of the limitations of SharePoint Online, I'm wondering how developers are dealing with the limitations. Lets say you are asked to develop something that has complex logic, including fetching data from external web services, dynamically
displaying parts of a process to people depending on role, and ending up with a printable document. In our on-premises environment, InfoPath is well suited to this task, with some code behind for some things. Or, if not using InfoPath, we would use application
pages and workflow.
Neither of those are available in SharePoint Online, so what would you do?

Some things, such as the conditional display of content, can be done via JavaScript. More advanced items, such as integrating external web services would likely require a SharePoint "app". A SharePoint app is essentially a link to a separate site
that is running an asp.net web app (or PHP, or whatever). This asp.net site can do anything it needs with any web services, or conditional formatting, or anything. Because it's registered as a SharePoint app, it can also call back into the SharePoint site
and work with data. So, a SharePoint App could present the user with a robust form that simply sends the data back to a SharePoint list. The SharePoint app can also be surfaced on the SharePoint site itself in an iframe, so the user won't know that the form
is hosted by another server.
By the way, the ideas behind the app model permeate the entire SharePoint environment: instead of having the SharePoint server itself run all kinds of custom business logic, that workload is handled by other servers, so the SharePoint servers can be focused
on running the core bits of SharePoint. InfoPath puts a large load on the servers, so it's out. XSLT list views also put a load on the server, so they're also out. SSRS is an amazingly fantastic tool, but is not supported in the cloud (and there's no
alternative). Timer jobs, event handlers, workflow, and many other things have been re-architected to take the load off the SharePoint servers.
Mike G.

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Re: Questions about Plan structure

Reply-To: "Duncan Kinnear" <[email protected]>
Q. if you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
A It is better to have them in the same plan.It depends on the design
you have
Q Why should the Managers be separated from their business classes?
A Managers are usually service objects which might require different
resources.
These managers when deployed might be required by several other
applications.
Seperating them as a different plan will help in just using one
installed partition to be
Used by different applications (refer about Reference Partition)
Q If you have the Database managers separate, what scope does each DB
manager cover?
A It is better to have the DB managers in user scope.
It depends on the numbers of users, u have for the system.
Since u are talking about 100 tables. It's a huge system.
It also depends on the user licenses u have for the backend.
Take care that u use proper load balancing of DB Managers for the
system.
Krishna CVSR
GoldStone Softech Inc
>
Hi there,
We are in the middle of designing the structure of a new system.
I have read/heard that it is best to break down the plans into the
following categories:
Business Classes
Managers/Services
Clients
I have a few questions about this structure:
Should related business classes be grouped together in Plans? E.g. if
you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
Why should the Managers be separated from their business classes?
E.g. if there is an EmployeeMgr service which deals with anything to do
with the Employee business class, why separate them in different
plans? If you need the manager to access the class, you will always
need both.
Some of the Forte documentation talks about "Policy" managers and
"Database" managers. How do the functions of these managers differ
for a simple CRUD (Create Read Update Delete) class?
If you have the Database managers separate, what scope does each
DB manager cover? I.e. do you have one for the entire database (over
100 tables in our case), or do you break it down by sub-system?
Thanks in advance for any answers.
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email: [email protected]
PO Box 764, McLean Towers, Phone: +64 6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
Providing Integrated Software to the Meat Processing Industry for over 10 years
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Reply-To: "Duncan Kinnear" <[email protected]>
Q. if you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
A It is better to have them in the same plan.It depends on the design
you have
Q Why should the Managers be separated from their business classes?
A Managers are usually service objects which might require different
resources.
These managers when deployed might be required by several other
applications.
Seperating them as a different plan will help in just using one
installed partition to be
Used by different applications (refer about Reference Partition)
Q If you have the Database managers separate, what scope does each DB
manager cover?
A It is better to have the DB managers in user scope.
It depends on the numbers of users, u have for the system.
Since u are talking about 100 tables. It's a huge system.
It also depends on the user licenses u have for the backend.
Take care that u use proper load balancing of DB Managers for the
system.
Krishna CVSR
GoldStone Softech Inc
>
Hi there,
We are in the middle of designing the structure of a new system.
I have read/heard that it is best to break down the plans into the
following categories:
Business Classes
Managers/Services
Clients
I have a few questions about this structure:
Should related business classes be grouped together in Plans? E.g. if
you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
Why should the Managers be separated from their business classes?
E.g. if there is an EmployeeMgr service which deals with anything to do
with the Employee business class, why separate them in different
plans? If you need the manager to access the class, you will always
need both.
Some of the Forte documentation talks about "Policy" managers and
"Database" managers. How do the functions of these managers differ
for a simple CRUD (Create Read Update Delete) class?
If you have the Database managers separate, what scope does each
DB manager cover? I.e. do you have one for the entire database (over
100 tables in our case), or do you break it down by sub-system?
Thanks in advance for any answers.
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email: [email protected]
PO Box 764, McLean Towers, Phone: +64 6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
Providing Integrated Software to the Meat Processing Industry for over 10 years
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Question about download file in OAS4

Question about download file in OAS4:
I use Oracle Application Server 4.0.7 on my Windows NT 4.0 SP6;
I use PL/Sql Cartridge developer a document system; It's use the
upload/download in PL/Sql Cartridge;
I read the document , the Upload/download in Pl/Sql Base on the
Oracle Application Server's Content Service. the Problem is when I
download a document, If I upload a Html or MsWord file, It will store in a LongRaw column, when me download ; It's tell me can't
find a application to open this file; I will select a application
from list to open the download file;
As normal, It will open MsWord Automatic when download a "doc" file ; also It will open a new window of Browser to view a Html file;
I check the download process on client Browser; when download
file, The content-type always return "application/octet-stream";
Also the download File will lost the postfix of the file,
So Browser don't open the File Automatic;
I think If I set the correct Content-Type , Browser can know how open the file; So I use owa_content.set_content_type procedure
set the Doc file to "application/msword" , but the WEb Server always
return "application/octet-stream";
I didn't know how to do this problem, Plese help me.
null

I have a Tecra M2 and rely on your email update to ensure I have the latest drivers on my machine.
When I received a Toshiba support email on 14 April 2005 giving reference to a QFE from Microsoft I assumed it would be necessary for my Tecra.
I was very confused when I found that this QFE and subsequent ones posted on the 16 April 2005 relate to Pre SP2 critical updates no9t required if one has already taken earlier advice of updating to Service Pack, at the very least your narrative should make mention of this. I find it very difficult to believe that your updates are two+ years out of date.

Question about f77 Forte Developer 6

Similar Messages

Maybe you are looking for