Remote desktop connection in windows 7 pro

I have a problem accessing remote desktop connection using windows 7 64 bit.
My remote desktop connection shell version 6.3.9600 shows the Network Level Authentication is not supported.
My other computer also win 7 pro 64 bit has a different shell version 6.2.9200 that supports Network Level Authentication.
How do I go backwards to shell 6.2.9200?
I have been trying use remote desktop using the more robust security and could not figure out why I could not log.
I have screen shots of the two shells and my system screens

Hi,
Configure Network Level Authentication
Click Start, click Run, type regedit, and then press ENTER.
In the navigation pane, locate and then click the following registrysubkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
In the details pane, right-click Security Packages, and then click Modify.
In the Value data box, type tspkg. Leave any data that is specific to other SSPs, and then click OK.
In the navigation pane, locate and then click the following registrysubkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders
In the details pane, right-click SecurityProviders, and then click Modify.
In the Value data box, type credssp.dll. Leave any data that is specific to other SSPs, and then click OK.
Exit Registry Editor.
Restart the computer.
Hope this helps!
Andy Altmann
TechNet Community Support

Similar Messages

  • Remote Desktop Connection to Windows 8 PC from other computers crashing

    Hi all.
    Was hoping someone would be able to help me with an issue I'm having.
    I'm trying to get a LAN remote desktop connection established to my Windows 8 laptop. It's an HP ENVY 17t-2100 CTO 3D Edition Notebook PC. Note that I'm running Windows 8 Pro only - not 8.1 as HP haven't released 8.1 graphics drivers for this laptop and probably
    never will. The computer has a single user profile that has full administrator rights.
    I have followed numerous web tutorials on how to turn on Remote Desktop. I've gone into Advanced System Settings > System Properties > Remote > checked "Allow Remote connections to this computer". All seems ok to me. 
    The problem comes when I try to establish a connection. When the connection is made, it almost instantaneously crashes the session on the computer or device trying to connect. The RDP client on my Windows 7 laptop, Mac OSX or Mac running Windows 8.1 Pro just
    crashes, while the RDP iPhone or iPad app simply flickers for a few seconds then goes back to the main screen. Meanwhile, the HP ENVY loads the lock screen and displays a message saying XXX device is connected remotely and it won't let me log back in to kill
    the connection or do anything. I have to restart the computer from then to be able to use it again.
    I'm convinced there's not a problem with my local network as the HP ENVY can RDP into the Windows 7 laptop or Mac running Windows 8.1 without any problems. All computers are connected via Ethernet to a Linksys/Cisco wireless ADSL modem router which supports
    Gigabit. The iPhone and iPad of course connect to the wifi network from the Cisco/Linksys modem router
    I've also had a brief look at the RDP local connection logs. From what I can make out, they confirm that a user has successfully logged in, but they don't provide a crash log or a log of the user ever disconnecting, probably because I have to restart the computer
    to continue using it. Dead end there, it seems.
    The HP ENVY is connected to 3 external HP LED monitors. I've disconnected them and tried all devices with no luck. I've also played round with the RDP client settings to not mount drives or printers and the HP ENVY has no printers connected anyway, though I've
    done all I can to remove any printer drivers as I've read elsewhere that they are what could cause the problem, but I've had no luck. 
    If anyone can suggest anything more that I can try, I would be unbelievably grateful! I'm more than happy to provide screenshots or videos of what happens when I try connecting. I'm not sure what you experts would find immediately helpful so just ask away if
    you think I can provide anything.
    Thanks in advance!
    rugbyreff

    The first thing that I would try is to uncheck all of the boxes for local resources on computer running the RDP client. It is possible that a device, such as a printer or other redirected device, is causing the crash. You can also look under Event Viewer
    in the event logs of both systems and see if anything unusual appears when you attempt the remote connection.
    Brandon
    Windows Outreach Team- IT Pro
    The Springboard Series on TechNet
    Hi Brandon
    Many thanks for your suggestions. There's nothing in the logs that I could find, like I said in the original post. I've also tried connecting with bare minimum settings on all devices (FYI the iPad and iPhone version don't support the use of printers) and
    this still hasn't helped.
    If you have any other ideas I'd be very glad to hear them!
    rrugbyreff
    "If it's worth doing, it's worth overdoing" -- MythBusters

  • Remote Desktop Connection freezes Windows 7 64-bit

    At home, I just upgraded from a Windows 7 Ultimate 32-bit desktop to a new Dell with Windows 7 Ultimate 64-bit OS.  Remote Desktop Connection from my old home PC to my work PC worked great for years even after upgrading both to Windows 7 Ultimate.  Now everytime I try to use Remote Desktop Connection (RDC) to connect into my work PC (with Windows Ultimate 7 32-bit) the RDC window will freeze after a new seconds of use.  If I wait approx 3 minutes the RDC window will unfreeze for a few seconds before freezing again.  If I minimize the RDC window on my home PC, I can continue to work because it's only the RDC window that is frozen.  Here is everything I've tried already that has not helped:
    1. Trying reducing the home PC screen resolution
    2. Downloaded the latest 64-bit driver from NVIDIA for the GTX 260 graphics card
    3. Taken my home PC to work to test behind the company's firewall--doesn't help
    4. Disabled Window Auto Tuning (suggestion from this website)
    5. Called Dell support--they tried for about an hour to help but couldn't; thier suggestion was to order Windows 7 32-bit version OS and install it
    6. Tried running the 32-bit version of mstsc.exe - no help
    7. Using MSCOMFIG, disabled all Startup items - no help
    I have another home PC running Windows XP, it works perfectly using RDC to connect to my work PC.  Also, I have no problem at all using RDC from my work PC back into my home PC (the other direction).
    Here may be a clue:  if I start up my new Dell Windows 64-bit OS in Safe Mode, the RDC session does not freeze.
    Any suggestions would be appreciated!

    Hi,
    Since it works in Safe Mode, I suspect this should be related to some conflicts, please try the methods in the following Knowledge Base article to have a check:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    In addition, please also ensure the NIC drivers on all of the computers are up-to-date.
    Hope this helps. Thanks.
    Nicholas Li - MSFT

  • Remote desktop connection problem windows 8

    Hi everybody,
    I hope you can help us. We run a software package that uses a remote desktop connection. When the program is minimised for more than a couple of minutes, the connection disconnects and takes a while to reconnect. We've been in touch with the guys that run
    the program and they've said that there's no problem on their end and that it must be on our end. It's happening with all three computers at one location and it's not happening with our two computers in our other location. 
    I've been in touch with the online support guys in microsoft and they couldn't help. So I'm wondering if any of you can help us (in laymans terms please!).
    All our computers run Windows 8.
    Thanks in advance.

    Hi,
    Thank you for your posting in Windows Server Forum.
    Yes, you can check with 2 different settings. 1) By Collection properties (Server 2012\R2) and RDP-Tcp connection under Remote Desktop Service Manager (Server 2008 R2). 2) The other setting is related to GPO (Set time
    limit for active but idle Remote Desktop Services sessions) as following path.
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits 
    User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits 
    You can check below link (Configuration 1) for more information.
    [Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
    http://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
    Hope it helps! 
    Thanks.
    Dharmesh Solanki

  • Remote desktop connection from windows computer to TC

    hi all,
    what I have: I have a TC 2TB, bought it three months ago.
    what I did: I have set it up at home. Using as base station for all my devices, iphone 4, ipad 2, macbook air and also other laptop. My TC is connected to ADSL modem with an ethernet cable (as expected). with port forwarding option of ADSL modem (in NAT Properties), I managed to forward any connection to TC. I have a static IP by the way.
    what I can do: from work or anywhere else other than my home network, I can connect to my static IP (via "Connect to Server" option in any mac device), it pops up a user name and password window, I login with my TC user name and decive password. In an instant my TC disk is mounted on my desktop, and I can reach all my files in it as if it is an external hard disk.
    what I cannot do: from a windows computer outside my network, I cannot connect to TC. I try to do this through "Remote Desktop Connection". Is this possible? If so how? Is this a problem related to network connection or TC settings?
    aakibar

    You cannot remote desktop into a TC..
    In fact you cannot remote access a TC from windows.. sorry.. but SMB protocol is blocked on the internet.. there are work arounds but no security.. don't do it.
    The only other protocol the TC offers is AFP.. there is no AFP file access software available for windows. You need to use a Mac.
    The best alternative is vpn.. replace your current adsl modem router with a vpn one.. eg draytek.. then you can access your home network. Since I presume when you say you have static ip you mean public IP then vpn is easy (well once setup it is).. reliable and secure.

  • Remote Desktop Connection in Windows 8

    Hi, I can't seem to figure out how to make my local drives available when using the app Remote Desktop Connection on my Windows 8. All the instructions I found on Microsoft do not apply to Windows 8 http://technet.microsoft.com/en-us/library/cc728050(v=ws.10).aspx
    .  Or else I can't find this "Options" tab they're talking about. 

    The program doesn't come up in a window anything like that. It's full screen with only the option to connect to a server. And in settings there are no options that resemble that.
    Hi,
    Could you please snapshot about RDC with us? Mine is shown as below
    Yolanda Zhu
    TechNet Community Support

  • Remote Desktop Connection between Windows Mobile 6.5 and server 2012

    Hi all,
    We have problem with remote desktop connection. The server that I want to connect is 2012 R2.
    We have no trouble with server 2008. I searched from internet, there are solutions on server side(I am not sure if these suggestions solve the problem), but our customers don’t want to solve this problem
    on server side because it is diffucult and risky.
    Is there a solution on handheld terminal side to do?
    Operating system: WM 6.5 classic(Professional o.s. has no effect, same error continues)
    Any help will be appreciated from your side.
    With Best Regards.

    Hi,
    What is the precise error message you are seeing?  What are the exact symptoms?
    I don't remember what version of RDP/featureset is supported by Windows Mobile 6.5.  Perhaps the client does not support Network Level Authentication, which is required by default on Server 2012 R2.  You can enable non-NLA connections by
    unchecking Allow connections only from computers with Network Level Authentication in Server Manager -- RDS -- Collections -- Properties of collection -- Security tab.
    Lack of NLA may not be the cause of the issue you are experiencing, however, if it is the only way to solve it would be to change the server setting or to potentially install a new client on the device that supports NLA.
    -TP

  • Dymo Labelwriter printers not working via Mac Remote Desktop connection into Windows Server 2008

    I'm having a really hard time getting Dymo labelwriters (models 335 turbo and 450 turbo) to work over a remote desktop connection and I'd appreciate any help you can offer.
    To briefly describe the situation, I'm working for a Doctor's office, moving their IT from a remotely-hosted environment where employees connect to their Windows Server 2008 virtual machines (hosted off-site) via Windows 7 machines through Microsoft's remote
    desktop software.
    The new setup will have new servers running in-house instead of remotely and will be based on Apple's Mac Mini machines running Windows 7 for some tasks through Parallels virtualization
    software running directly on each employee's Mac Mini.
    We have 3 of the Dymo 450 Turbo products and one 330 Turbo, each connected directly to a Mac Mini.
    Here's the problem: I have Microsoft's Remote Desktop software running on the Macs natively, connected to each employee's virtual machine on the remote server for now, until the time comes to make the switch to using the new in-house server. The remote desktop
    software works fine - employees are able to connect successfully and access their desktops fine. I have the "Forward Printing Devices" option checked in the Microsoft Remote Desktop app so that the hosted virtual desktops can see the local labelwriters.
    However, the Dymo Label software running on the remote server will not recognize that a labelwriter is present.
    If I go to the Printers and Devices window on the remote server, the labelwriter shows up fine, named "dymo labelwriter 450 turbo (redirected 10)" however running the Dymo Label software gives an error, "Dymo label says no printer connected:
    dymo label printer requires a dymo label printer be installed and connected ..."
    To try and narrow down the cause of the problem, on the same Mac, I ran Windows 7 via Parallels and set up a new remote desktop connection within that Windows VM. Just to be clear, instead of using the RDC software running in the Mac OS, this new connection
    is using a Windows virtual machine running on the same Mac, with the RDC being established from within that Windows VM. Again, I forward printing devices and the labelwriter shows up in Printers and Devices on the remote server as "dymo labelwriter 450
    turbo (redirected 10)" This time, the Dymo Label software recognizes the attached labelwriter and runs fine.
    I'd appreciate any advice you can give on why, as far as the remote server is concerned, a forwarded labelwriter from Microsoft remote desktop running natively on a Mac isn't recognized
    but it is if forwarded from within Windows, bearing in mind that the labelwriter shows up on the remote server in both instances and is called the same name in devices and printers.
    Sorry for the long-winded question. I hope you can help me.

    Hi,
    Thank you for posting in Windows Server Forum.
    Firstly please check whether you have driver capable for your printer with MAC MRD. Also I would like you to check with updated MRD version 8.0.9 for MAC OSX. 
    https://itunes.apple.com/in/app/microsoft-remote-desktop/id715768417?mt=12
    Because as you have commented it can work with windows RDP, so please also try to contact Dymo Labelwriter printer and inquire regarding the issue.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Detect remote desktop connection in Windows XP

    Dear experts,
    I have a single service thread application which do an activity at regular intervals.
    I have made a provision that only one instance of this thead runs at a time.
    However,this is not solving my issue to much extent.
    I want that i should be able to detect if current operating system session is RDP or not.
    I tried "os.<properties>" but none of such exists.This is strange !.
    Plz help.

    I just wonder why people do not plainly accept ignorance instead filling jittery, as we can make from these
    rude comments posted. This is the exact solution i worked on .
    //Detect local or remote session
    import com.sun.jna.Library;
    import com.sun.jna.Native;
    import com.sun.jna.ptr.IntByReference;
    import com.sun.jna.win32.*;
    import com.sun.jna.examples.win32.Kernel32;
    public class DetectSession
    boolean ret;
    DetectSession()
    ret = isLocalSession();
    if (ret == true ) {
    System.out.print("Local");
    else {
    System.out.print("Remote");
    public interface Kernel32 extends Library {
    public int GetCurrentProcessId();
    public boolean ProcessIdToSessionId(int x,IntByReference y);
    public int WTSGetActiveConsoleSessionId();
    public static void main(String args[])
    new DetectSession();
    public static boolean isLocalSession() {
    Kernel32 kernel32;
    IntByReference pSessionId;
    int consoleSessionId;
    Kernel32 lib = (Kernel32) Native.loadLibrary("kernel32", Kernel32.class);
    pSessionId = new IntByReference();
    if (lib.ProcessIdToSessionId(lib.GetCurrentProcessId(), pSessionId)) {
    consoleSessionId = lib.WTSGetActiveConsoleSessionId();
    if(consoleSessionId != 0xFFFFFFFF && consoleSessionId == pSessionId.getValue()) {
    return(true);
    return(false);
    } // isLocalSession
    }

  • Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

    i have still facing same problem in last two week in my  system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not  in my system use the command netstat -a -o command in
    command prompt but this is  my bad luck  its not woking in my machine after i have decide to change RDC listening port via registry  i have change it 3389 to 3391 after restart my system,  and
    after again testing using same command but no any change again rdc not listening . After i have  search this issue on search engine google bing and microsoft , i have found more solutions  but i have try one
    uninstalled two microsoft updates first is kb  KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
    any version computer running , i have try  three and four time enable  disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
    stinger tools to scan my machine to remove virus but stinger is not found any thread in system.  ihave already run this command in my system sfc /scannow  Please Can you help me to fix  this issue.

    Hi,
    When you try to start the Remote Destop Connection, what errors it showed out?
    Could the other PCs connect this PC with the RDC?
    So you have read this blog?
    RDP connections might fail due to a problem with KB2621440 - MS12-020
    Did you reinstalled the KB2621440?
    Besides, did you follow this guide to enable the RDC connection?
    Connect to another computer using Remote Desktop Connection
    And also this guide?
    Why can’t I connect using Remote Desktop Connection?
    Please take a check with those settings again.
    Best regards
    Michael Shao
    TechNet Community Support

  • Problem Establishing Remote Desktop Connection from Win 7 64Bit

    I just got a new Lenovo laptop running Windows 7 Pro 64 Bit with Service Pack 1. I have installed all Win 7 Updates.
    When I try to connect to other Windows 7 Ultimate (32 bit) desktops through Remote Desktop Connection over my LAN, I get the following error:
    "An authentication error has occurred. The requested security package does not exist"
    I can connect to a Windows Small Business Server 2003 32 bit server from the laptop without problem.
    All machines are members of the same Windows domain.
    The Windows 7 machines I am trying to connect to can connect to each other without issue. NLA is set as not required on each of the desktops, though I have tried turning the NLA setting on, and received the same error.
    I have even tried running the 32 bit version of mstsc.exe and disabling the 64 bit version as discussed here:
    http://www.davidmoore.info/2009/12/02/running-32-bit-remote-desktop-connection-on-windows-64-bit/
    This had no effect either.

    Hi,
    Based on my research, please check whether the value of HKLM\SYSTEM\CurrentControlSet\Control\Lsa\Security Packages is
    kerberos
    msv1_0
    schannel
    wdigest
    tspkg
    pku2u
    If not, please correct it and see how it works.
    Note: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For
    more information about how to back up and restore the registry, please refer to
    How to back up and restore the registry in Windows.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Remote Desktop Connection and iTunes - Won't recognize cd-rom drive

    When I connect to my remote server using Remote Desktop Connection in Windows 7 and start iTunes it see the CD-Rom drive, but when I double click on a track in Windows Explorer iTunes opens but it does nothing!  Any ideas?  Thanks in advance for any and all suggestions.

    Okay, apologies for the duplicate thread - I tried searching and didn't see anyone with a similar issue, but now I see a thread down the page with the same issue of the disc not ejecting. I'll try WMP and see if that works any better...

  • Enable Remote Desktop Connections with PowerShell

    What is the easiest way to enable remote desktop connections on Windows 7, with powershell?

    Use Shay Levy's "Remote Registry PowerShell Module", and modify the value of the "fDenyTSConnection" value in the
    key "HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server" on the remote box to "0"
    The Windows 7 box will need to be rebooted before it will take effect.
    See http://oreilly.com/windows/archive/server-hacks-remote-desktop.html
    Or, grab Michal Gajda's script "Enable-RDP.ps1" in the gallery :)
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
    My Blog: http://unlockpowershell.wordpress.com
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ("6B61726C6D69747363686B65406D742E6E6574"-split"(?<=\G.{2})",19|%{[char][int]"0x$_"})

  • Firefox 7.0.1 crashes over Remote Desktop Connection

    Firefox has been crashing very often over a Remote Desktop Connection in Windows 7 (Client: Windows XP, Host: Windows 7). The problem used to occur infrequently before, but has worsened since the last few updates.

    I do not have a crash ID because Firefox just freezes (hourglass on the window) and then I have to kill the process from Task Manager in Windows 7. No message, no IDs, just freezes. Then Firefox starts with the "Oops this is embarrassing" message, asking which tabs to restore. This happens randomly when accessing sites like Facebook and YouTube and playing videos.
    Can I check the log to see if there is a crash ID?

  • IS at work told me I need to upggrade my home Macbook Pro operating system , 10.6.8, to a new version in order to remote desktop connect to my windows 7.1 machine at work.  I want to know if I can skip prior upgrades and go to Yosemite or if I have

    Since my work machine was upgraded to a Windows 7.1 pc, I can no longer connect remotely with my Macbook Pro with 10.6.8.  I need to know the most efficient and economical way of doing this and if I can skip versions to get where I need to be.  Supposedly, I need the very latest remote desktop connection software, and it is not compatible with 10.6.8.  Help please.
    Thanks

    Open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
    Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    (119310)

Maybe you are looking for