Reports_path 255
Hello All,
Began having troubles with Forms calling Reports, when I discovered that my reports_path > 255.
I know this is a no-no, but what is the work around.
Details: Win XP, Dev Suite 9.0.4.1
-Thanks
chris
Martin,
I'd prefer to be creative, however I'm not a Windows Registry wizard/guru.
It would be helpful if you would provide a little more info or an example.
Am I to assume that:
1.) I create a registry string value of "R1", and a data value of drive_letter:\folder\folder\
2.) In the reports_path data value update it to read $r1;$r2
Thanks again
Similar Messages
-
Command return code of 255 (65280) during Grid Infrastructure Installation
I am trying to create a 2-node RAC 11gR2. I am using OEL 5 Update 4. I am using NFS as shared storage. The time on both node is same. Both nodes have 4GB RAM each. Following is my IP settings from /etc/hosts on both nodes:
[oracle@vis ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
# Public
10.8.5.191 vis.awc.com vis
10.8.5.192 vsstest.awc.com vsstest
#Private
192.168.0.101 vis-priv.awc.com vis-priv
192.168.0.102 vsstest-priv.awc.com vsstest-priv
#Virtual
10.8.5.166 vis-vip.awc.com vis-vip
10.8.5.170 vsstest-vip.awc.com vsstest-vip
# SCAN
10.8.5.182 rac-scan.awc.com rac-scan
#NAS
192.168.0.101 nas1.awc.com nas1
I am getting error during the Grid Infrastructure installation, when I run the root.sh script through root. Following is the logfile showing the error (/u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_vis.log):
2010-02-02 11:58:05: The configuration parameter file /u01/app/11.2.0/grid/crs/install/crsconfig_params is valid
2010-02-02 11:58:05: Checking for super user privileges
2010-02-02 11:58:05: User has super user privileges
2010-02-02 11:58:05: ### Printing the configuration values from files:
2010-02-02 11:58:05: /u01/app/11.2.0/grid/crs/install/crsconfig_params
2010-02-02 11:58:05: /u01/app/11.2.0/grid/crs/install/s_crsconfig_defs
2010-02-02 11:58:05: ASM_DISCOVERY_STRING=
2010-02-02 11:58:05: ASM_DISKS=
2010-02-02 11:58:05: ASM_DISK_GROUP=
2010-02-02 11:58:05: ASM_REDUNDANCY=
2010-02-02 11:58:05: ASM_SPFILE=
2010-02-02 11:58:05: ASM_UPGRADE=false
2010-02-02 11:58:05: CLSCFG_MISSCOUNT=
2010-02-02 11:58:05: CLUSTER_GUID=
2010-02-02 11:58:05: CLUSTER_NAME=rac-scan
2010-02-02 11:58:05: CRS_NODEVIPS='vis-vip/255.248.0.0/eth0,vsstest-vip/255.248.0.0/eth0'
2010-02-02 11:58:05: CRS_STORAGE_OPTION=2
2010-02-02 11:58:05: CSS_LEASEDURATION=400
2010-02-02 11:58:05: DIRPREFIX=
2010-02-02 11:58:05: DISABLE_OPROCD=0
2010-02-02 11:58:05: EMBASEJAR_NAME=oemlt.jar
2010-02-02 11:58:05: EWTJAR_NAME=ewt3.jar
2010-02-02 11:58:05: EXTERNAL_ORACLE_BIN=/opt/oracle/bin
2010-02-02 11:58:05: GNS_ADDR_LIST=
2010-02-02 11:58:05: GNS_ALLOW_NET_LIST=
2010-02-02 11:58:05: GNS_CONF=false
2010-02-02 11:58:05: GNS_DENY_ITF_LIST=
2010-02-02 11:58:05: GNS_DENY_NET_LIST=
2010-02-02 11:58:05: GNS_DOMAIN_LIST=
2010-02-02 11:58:05: GPNPCONFIGDIR=/u01/app/11.2.0/grid
2010-02-02 11:58:05: GPNPGCONFIGDIR=/u01/app/11.2.0/grid
2010-02-02 11:58:05: GPNP_PA=
2010-02-02 11:58:05: HELPJAR_NAME=help4.jar
2010-02-02 11:58:05: HOST_NAME_LIST=vis,vsstest
2010-02-02 11:58:05: ID=/etc/init.d
2010-02-02 11:58:05: INIT=/sbin/init
2010-02-02 11:58:05: IT=/etc/inittab
2010-02-02 11:58:05: JEWTJAR_NAME=jewt4.jar
2010-02-02 11:58:05: JLIBDIR=/u01/app/11.2.0/grid/jlib
2010-02-02 11:58:05: JREDIR=/u01/app/11.2.0/grid/jdk/jre/
2010-02-02 11:58:06: LANGUAGE_ID=AMERICAN_AMERICA.AL32UTF8
2010-02-02 11:58:06: MSGFILE=/var/adm/messages
2010-02-02 11:58:06: NETCFGJAR_NAME=netcfg.jar
2010-02-02 11:58:06: NETWORKS="eth0"/10.8.0.0:public,"eth1"/192.168.0.0:cluster_interconnect
2010-02-02 11:58:06: NEW_HOST_NAME_LIST=
2010-02-02 11:58:06: NEW_NODEVIPS='vis-vip/255.248.0.0/eth0,vsstest-vip/255.248.0.0/eth0'
2010-02-02 11:58:06: NEW_NODE_NAME_LIST=
2010-02-02 11:58:06: NEW_PRIVATE_NAME_LIST=
2010-02-02 11:58:06: NODELIST=vis,vsstest
2010-02-02 11:58:06: NODE_NAME_LIST=vis,vsstest
2010-02-02 11:58:06: OCFS_CONFIG=
2010-02-02 11:58:06: OCRCONFIG=/etc/oracle/ocr.loc
2010-02-02 11:58:06: OCRCONFIGDIR=/etc/oracle
2010-02-02 11:58:06: OCRID=
2010-02-02 11:58:06: OCRLOC=ocr.loc
2010-02-02 11:58:06: OCR_LOCATIONS=/u01/shared_config/ocr_configuration
2010-02-02 11:58:06: OLASTGASPDIR=/etc/oracle/lastgasp
2010-02-02 11:58:06: OLRCONFIG=/etc/oracle/olr.loc
2010-02-02 11:58:06: OLRCONFIGDIR=/etc/oracle
2010-02-02 11:58:06: OLRLOC=olr.loc
2010-02-02 11:58:06: OPROCDCHECKDIR=/etc/oracle/oprocd/check
2010-02-02 11:58:06: OPROCDDIR=/etc/oracle/oprocd
2010-02-02 11:58:06: OPROCDFATALDIR=/etc/oracle/oprocd/fatal
2010-02-02 11:58:06: OPROCDSTOPDIR=/etc/oracle/oprocd/stop
2010-02-02 11:58:06: ORACLE_BASE=/u01/app/oracle
2010-02-02 11:58:06: ORACLE_HOME=/u01/app/11.2.0/grid
2010-02-02 11:58:06: ORACLE_OWNER=oracle
2010-02-02 11:58:06: ORA_ASM_GROUP=dba
2010-02-02 11:58:06: ORA_DBA_GROUP=oinstall
2010-02-02 11:58:06: PRIVATE_NAME_LIST=
2010-02-02 11:58:06: RCALLDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc3.d /etc/rc.d/rc4.d /etc/rc.d/rc5.d /etc/rc.d/rc6.d
2010-02-02 11:58:06: RCKDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc4.d /etc/rc.d/rc6.d
2010-02-02 11:58:06: RCSDIR=/etc/rc.d/rc3.d /etc/rc.d/rc5.d
2010-02-02 11:58:06: RC_KILL=K19
2010-02-02 11:58:06: RC_KILL_OLD=K96
2010-02-02 11:58:06: RC_START=S96
2010-02-02 11:58:06: SCAN_NAME=rac-scan.awc.com
2010-02-02 11:58:06: SCAN_PORT=1521
2010-02-02 11:58:06: SCRBASE=/etc/oracle/scls_scr
2010-02-02 11:58:06: SHAREJAR_NAME=share.jar
2010-02-02 11:58:06: SILENT=false
2010-02-02 11:58:06: SO_EXT=so
2010-02-02 11:58:06: SRVCFGLOC=srvConfig.loc
2010-02-02 11:58:06: SRVCONFIG=/var/opt/oracle/srvConfig.loc
2010-02-02 11:58:06: SRVCONFIGDIR=/var/opt/oracle
2010-02-02 11:58:06: VNDR_CLUSTER=false
2010-02-02 11:58:06: VOTING_DISKS=/u01/shared_config/voting_disk
2010-02-02 11:58:06: ### Printing other configuration values ###
2010-02-02 11:58:06: CLSCFG_EXTRA_PARMS=
2010-02-02 11:58:06: CRSDelete=0
2010-02-02 11:58:06: CRSPatch=0
2010-02-02 11:58:06: DEBUG=
2010-02-02 11:58:06: DOWNGRADE=
2010-02-02 11:58:06: HAS_GROUP=oinstall
2010-02-02 11:58:06: HAS_USER=root
2010-02-02 11:58:06: HOST=vis
2010-02-02 11:58:07: IS_SIHA=0
2010-02-02 11:58:07: OLR_DIRECTORY=/u01/app/11.2.0/grid/cdata
2010-02-02 11:58:07: OLR_LOCATION=/u01/app/11.2.0/grid/cdata/vis.olr
2010-02-02 11:58:07: ORA_CRS_HOME=/u01/app/11.2.0/grid
2010-02-02 11:58:07: SUPERUSER=root
2010-02-02 11:58:07: UPGRADE=
2010-02-02 11:58:07: VF_DISCOVERY_STRING=/u01/shared_config/voting_disk
2010-02-02 11:58:07: addfile=/u01/app/11.2.0/grid/crs/install/crsconfig_addparams
2010-02-02 11:58:07: crscfg_trace=1
2010-02-02 11:58:07: crscfg_trace_file=/u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_vis.log
2010-02-02 11:58:07: hosts=
2010-02-02 11:58:07: oldcrshome=
2010-02-02 11:58:07: oldcrsver=
2010-02-02 11:58:07: osdfile=/u01/app/11.2.0/grid/crs/install/s_crsconfig_defs
2010-02-02 11:58:07: parameters_valid=1
2010-02-02 11:58:07: paramfile=/u01/app/11.2.0/grid/crs/install/crsconfig_params
2010-02-02 11:58:07: platform_family=unix
2010-02-02 11:58:07: srvctl_trc_suff=0
2010-02-02 11:58:07: unlock_crshome=
2010-02-02 11:58:07: user_is_superuser=1
2010-02-02 11:58:07: ### Printing of configuration values complete ###
2010-02-02 11:58:07: Oracle CRS stack is not configured yet
2010-02-02 11:58:07: CRS is not yet configured. Hence, will proceed to configure CRS
2010-02-02 11:58:07: Cluster-wide one-time actions... Done!
2010-02-02 11:58:17: set owner/group of OCR path
2010-02-02 11:58:17: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:17: Host name = vis
2010-02-02 11:58:17: CRS user = oracle
2010-02-02 11:58:17: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:17: GPnP host = vis
2010-02-02 11:58:17: Oracle GPnP home = /u01/app/11.2.0/grid/gpnp
2010-02-02 11:58:17: Oracle GPnP local home = /u01/app/11.2.0/grid/gpnp/vis
2010-02-02 11:58:17: GPnP directories verified.
2010-02-02 11:58:17: Checking to see if Oracle CRS stack is already configured
2010-02-02 11:58:17: Oracle CRS stack is not configured yet
2010-02-02 11:58:17: ---Checking local gpnp setup...
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" does not exist
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cwallet.sso" does not exist
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr/cwallet.sso" does not exist
2010-02-02 11:58:18: chk gpnphome /u01/app/11.2.0/grid/gpnp/vis: profile_ok 0 wallet_ok 0 r/o_wallet_ok 0
2010-02-02 11:58:18: chk gpnphome /u01/app/11.2.0/grid/gpnp/vis: INVALID (bad profile/wallet)
2010-02-02 11:58:18: ---Checking cluster-wide gpnp setup...
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/profiles/peer/profile.xml" does not exist
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/wallets/peer/cwallet.sso" does not exist
2010-02-02 11:58:18: The setup file "/u01/app/11.2.0/grid/gpnp/wallets/prdr/cwallet.sso" does not exist
2010-02-02 11:58:18: chk gpnphome /u01/app/11.2.0/grid/gpnp: profile_ok 0 wallet_ok 0 r/o_wallet_ok 0
2010-02-02 11:58:18: chk gpnphome /u01/app/11.2.0/grid/gpnp: INVALID (bad profile/wallet)
2010-02-02 11:58:18: gpnp setup checked: local valid? 0 cluster-wide valid? 0
2010-02-02 11:58:18: gpnp setup: NONE
2010-02-02 11:58:18: GPNP configuration required
2010-02-02 11:58:18: Validating for SI-CSS configuration
2010-02-02 11:58:18: Retrieving OCR main disk location
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc
2010-02-02 11:58:18: Unable to retrieve ocr disk info
2010-02-02 11:58:18: Checking to see if any 9i GSD is up
2010-02-02 11:58:18: libskgxnBase_lib = /etc/ORCLcluster/oracm/lib/libskgxn2.so
2010-02-02 11:58:18: libskgxn_lib = /opt/ORCLcluster/lib/libskgxn2.so
2010-02-02 11:58:18: SKGXN library file does not exists
2010-02-02 11:58:18: OLR location = /u01/app/11.2.0/grid/cdata/vis.olr
2010-02-02 11:58:18: Oracle CRS Home = /u01/app/11.2.0/grid
2010-02-02 11:58:18: Validating /etc/oracle/olr.loc file for OLR location /u01/app/11.2.0/grid/cdata/vis.olr
2010-02-02 11:58:18: /etc/oracle/olr.loc already exists. Backing up /etc/oracle/olr.loc to /etc/oracle/olr.loc.orig
2010-02-02 11:58:18: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:18: Oracle cluster name = rac-scan
2010-02-02 11:58:18: OCR locations = /u01/shared_config/ocr_configuration
2010-02-02 11:58:18: Validating OCR
2010-02-02 11:58:18: Retrieving OCR location used by previous installations
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrmirrorconfig_loc
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc3
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc4
2010-02-02 11:58:18: Opening file OCRCONFIG
2010-02-02 11:58:18: Value () is set for key=ocrconfig_loc5
2010-02-02 11:58:18: Checking if OCR sync file exists
2010-02-02 11:58:18: No need to sync OCR file
2010-02-02 11:58:18: OCR_LOCATION=/u01/shared_config/ocr_configuration
2010-02-02 11:58:18: OCR_MIRROR_LOCATION=
2010-02-02 11:58:18: OCR_MIRROR_LOC3=
2010-02-02 11:58:18: OCR_MIRROR_LOC4=
2010-02-02 11:58:19: OCR_MIRROR_LOC5=
2010-02-02 11:58:19: Current OCR location=
2010-02-02 11:58:19: Current OCR mirror location=
2010-02-02 11:58:19: Current OCR mirror loc3=
2010-02-02 11:58:19: Current OCR mirror loc4=
2010-02-02 11:58:19: Current OCR mirror loc5=
2010-02-02 11:58:19: Verifying current OCR settings with user entered values
2010-02-02 11:58:19: Setting OCR locations in /etc/oracle/ocr.loc
2010-02-02 11:58:19: Validating OCR locations in /etc/oracle/ocr.loc
2010-02-02 11:58:19: Checking for existence of /etc/oracle/ocr.loc
2010-02-02 11:58:19: Backing up /etc/oracle/ocr.loc to /etc/oracle/ocr.loc.orig
2010-02-02 11:58:19: Setting ocr location /u01/shared_config/ocr_configuration
2010-02-02 11:58:19: Creating or upgrading Oracle Local Registry (OLR)
2010-02-02 11:58:20: OLR successfully created or upgraded
2010-02-02 11:58:20: /u01/app/11.2.0/grid/bin/clscfg -localadd
2010-02-02 11:58:21: Keys created in the OLR successfully
2010-02-02 11:58:21: GPnP setup state: none
2010-02-02 11:58:21: Creating local GPnP setup for clustered node...
2010-02-02 11:58:21: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:21: Oracle GPnP wallets home = /u01/app/11.2.0/grid/gpnp/vis/wallets
2010-02-02 11:58:21: Checking if GPnP setup exists
2010-02-02 11:58:21: /u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cwallet.sso wallet must be created
2010-02-02 11:58:21: Removing old wallets/certificates, if any
2010-02-02 11:58:21: Creating GPnP Root Wallet...
2010-02-02 11:58:21: /u01/app/11.2.0/grid/bin/orapki wallet create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -nologo
2010-02-02 11:58:22: Creating GPnP Root Certificate...
2010-02-02 11:58:22: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -self_signed -dn "CN=GPnP_root" -keysize 1024 -validity 9999 -nologo
2010-02-02 11:58:24: Exporting GPnP Root Certificate...
2010-02-02 11:58:24: /u01/app/11.2.0/grid/bin/orapki wallet export -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -dn "CN=GPnP_root" -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/root/b64certificate.txt" -nologo
2010-02-02 11:58:25: Creating GPnP Peer Wallet...
2010-02-02 11:58:25: /u01/app/11.2.0/grid/bin/orapki wallet create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -auto_login -nologo
2010-02-02 11:58:25: Creating GPnP Profile Reader Wallet...
2010-02-02 11:58:25: /u01/app/11.2.0/grid/bin/orapki wallet create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr" -pwd gpnp_wallet1 -auto_login -nologo
2010-02-02 11:58:26: Creating GPnP PA Wallet...
2010-02-02 11:58:26: /u01/app/11.2.0/grid/bin/orapki wallet create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -auto_login -nologo
2010-02-02 11:58:27: Adding private key to GPnP Peer Wallet...
2010-02-02 11:58:27: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -keysize 1024 -nologo
2010-02-02 11:58:28: Adding private key to GPnP PA Wallet...
2010-02-02 11:58:28: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -keysize 1024 -nologo
2010-02-02 11:58:29: Creating certificate request for GPnP Peer Wallet...
2010-02-02 11:58:29: /u01/app/11.2.0/grid/bin/orapki wallet export -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -request "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/certreq.txt" -nologo
2010-02-02 11:58:30: Creating certificate request for GPnP PA Wallet...
2010-02-02 11:58:30: /u01/app/11.2.0/grid/bin/orapki wallet export -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -request "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/certreq.txt" -nologo
2010-02-02 11:58:31: Creating certificate for GPnP Peer Wallet...
2010-02-02 11:58:31: /u01/app/11.2.0/grid/bin/orapki cert create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -request "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/certreq.txt" -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cert.txt" -validity 9999 -nologo
2010-02-02 11:58:32: Creating certificate for GPnP PA Wallet...
2010-02-02 11:58:32: /u01/app/11.2.0/grid/bin/orapki cert create -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/root" -pwd gpnp_wallet1 -request "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/certreq.txt" -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/cert.txt" -validity 9999 -nologo
2010-02-02 11:58:33: Adding Root Certificate TP to GPnP Peer Wallet...
2010-02-02 11:58:33: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/root/b64certificate.txt" -nologo
2010-02-02 11:58:34: Adding Root Certificate TP to GPnP Profile Reader Wallet...
2010-02-02 11:58:34: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/root/b64certificate.txt" -nologo
2010-02-02 11:58:34: Adding Root Certificate TP to GPnP PA Wallet...
2010-02-02 11:58:34: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/root/b64certificate.txt" -nologo
2010-02-02 11:58:35: Adding PA Certificate as a TP into a GPnP Peer Wallet...
2010-02-02 11:58:35: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/cert.txt" -nologo
2010-02-02 11:58:36: Adding peer Certificate as a TP into a GPnP PA Wallet...
2010-02-02 11:58:36: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cert.txt" -nologo
2010-02-02 11:58:37: Adding PA Certificate as a TP into a GPnP Profile Reader Wallet...
2010-02-02 11:58:37: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/cert.txt" -nologo
2010-02-02 11:58:38: Adding peer Certificate as a TP into a GPnP Profile Reader Wallet...
2010-02-02 11:58:38: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/prdr" -pwd gpnp_wallet1 -trusted_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cert.txt" -nologo
2010-02-02 11:58:39: Adding PA Certificate as a TP into a GPnP Peer Wallet...
2010-02-02 11:58:39: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -pwd gpnp_wallet1 -user_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/peer/cert.txt" -nologo
2010-02-02 11:58:40: Adding peer Certificate as a TP into a GPnP PA Wallet...
2010-02-02 11:58:40: /u01/app/11.2.0/grid/bin/orapki wallet add -wallet "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa" -pwd gpnp_wallet1 -user_cert -cert "/u01/app/11.2.0/grid/gpnp/vis/wallets/pa/cert.txt" -nologo
2010-02-02 11:58:41: GPnP Wallets ownership/permissions successfully set.
2010-02-02 11:58:41: GPnP Wallets successfully created.
2010-02-02 11:58:41: <--- GPnP wallets successfully created
2010-02-02 11:58:41: Creating GPnP peer profile --->
2010-02-02 11:58:41: Oracle CRS home = /u01/app/11.2.0/grid
2010-02-02 11:58:41: Oracle GPnP profiles home = /u01/app/11.2.0/grid/gpnp/vis/profiles
2010-02-02 11:58:41: Oracle GPnP profiles parameters:
2010-02-02 11:58:41: paloc==
2010-02-02 11:58:41: cname=rac-scan=
2010-02-02 11:58:41: cssdisco=/u01/shared_config/voting_disk=
2010-02-02 11:58:41: cssld=400=
2010-02-02 11:58:41: asmdisco==
2010-02-02 11:58:41: asmspf==
2010-02-02 11:58:41: netlst="eth0"/10.8.0.0:public,"eth1"/192.168.0.0:cluster_interconnect=
2010-02-02 11:58:41: ocrid==
2010-02-02 11:58:41: clusterguid==
2010-02-02 11:58:41: Checking if GPnP setup exists
2010-02-02 11:58:41: /u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml profile must be created
2010-02-02 11:58:41: OCRID is not available, hence not set in GPnP Profile
2010-02-02 11:58:42: ClusterGUID is not available, hence not set in GPnP Profile
2010-02-02 11:58:42: gpnptool: run /u01/app/11.2.0/grid/bin/gpnptool create -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -prf -prf_sq=1 -prf_cn=rac-scan -prf_pa="" -hnet=gen -gen:hnet_nm="*" -gen:net=net1 -net1:net_ip="10.8.0.0" -net1:net_ada="eth0" -net1:net_use="public" -gen:net=net2 -net2:net_ip="192.168.0.0" -net2:net_ada="eth1" -net2:net_use="cluster_interconnect" -css=css -css:css_dis="/u01/shared_config/voting_disk" -css:css_ld=400 -asm=asm -asm:asm_dis="++no-value-at-profile-creation--never-updated-through-ASM++" -asm:asm_spf=""
2010-02-02 11:58:42: Running as user oracle: /u01/app/11.2.0/grid/bin/gpnptool create -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -prf -prf_sq=1 -prf_cn=rac-scan -prf_pa="" -hnet=gen -gen:hnet_nm="*" -gen:net=net1 -net1:net_ip="10.8.0.0" -net1:net_ada="eth0" -net1:net_use="public" -gen:net=net2 -net2:net_ip="192.168.0.0" -net2:net_ada="eth1" -net2:net_use="cluster_interconnect" -css=css -css:css_dis="/u01/shared_config/voting_disk" -css:css_ld=400 -asm=asm -asm:asm_dis="++no-value-at-profile-creation--never-updated-through-ASM++" -asm:asm_spf=""
2010-02-02 11:58:42: s_run_as_user2: Running /bin/su oracle -c ' /u01/app/11.2.0/grid/bin/gpnptool create -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -prf -prf_sq=1 -prf_cn=rac-scan -prf_pa="" -hnet=gen -gen:hnet_nm="*" -gen:net=net1 -net1:net_ip="10.8.0.0" -net1:net_ada="eth0" -net1:net_use="public" -gen:net=net2 -net2:net_ip="192.168.0.0" -net2:net_ada="eth1" -net2:net_use="cluster_interconnect" -css=css -css:css_dis="/u01/shared_config/voting_disk" -css:css_ld=400 -asm=asm -asm:asm_dis="++no-value-at-profile-creation--never-updated-through-ASM++" -asm:asm_spf="" '
2010-02-02 11:58:42: Removing file /tmp/fileXUKYkK
2010-02-02 11:58:42: Successfully removed file: /tmp/fileXUKYkK
2010-02-02 11:58:42: /bin/su successfully executed
2010-02-02 11:58:42: gpnptool: rc=0
2010-02-02 11:58:42: gpnptool output:
Resulting profile written to "/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml".
Success.
2010-02-02 11:58:42: gpnptool: run /u01/app/11.2.0/grid/bin/gpnptool sign -p="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -w="file:/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -rmws
2010-02-02 11:58:42: Running as user oracle: /u01/app/11.2.0/grid/bin/gpnptool sign -p="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -w="file:/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -rmws
2010-02-02 11:58:42: s_run_as_user2: Running /bin/su oracle -c ' /u01/app/11.2.0/grid/bin/gpnptool sign -p="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -o="/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml" -ovr -w="file:/u01/app/11.2.0/grid/gpnp/vis/wallets/peer" -rmws '
2010-02-02 11:58:43: Removing file /tmp/file4E7Vnj
2010-02-02 11:58:43: Successfully removed file: /tmp/file4E7Vnj
2010-02-02 11:58:43: /bin/su successfully executed
2010-02-02 11:58:43: gpnptool: rc=0
2010-02-02 11:58:43: gpnptool output:
Resulting profile written to "/u01/app/11.2.0/grid/gpnp/vis/profiles/peer/profile.xml".
Success.
2010-02-02 11:58:43: GPnP peer profile create successfully completed.
2010-02-02 11:58:43: <--- GPnP peer profile successfully created
2010-02-02 11:58:43: GPnP local setup successfully created
2010-02-02 11:58:43: Registering ohasd
2010-02-02 11:58:43: init file = /u01/app/11.2.0/grid/crs/init/init.ohasd
2010-02-02 11:58:43: Copying file /u01/app/11.2.0/grid/crs/init/init.ohasd to /etc/init.d directory
2010-02-02 11:58:43: Setting init.ohasd permission in /etc/init.d directory
2010-02-02 11:58:43: init file = /u01/app/11.2.0/grid/crs/init/ohasd
2010-02-02 11:58:43: Copying file /u01/app/11.2.0/grid/crs/init/ohasd to /etc/init.d directory
2010-02-02 11:58:43: Setting ohasd permission in /etc/init.d directory
2010-02-02 11:58:43: Removing "/etc/rc.d/rc3.d/S96ohasd"
2010-02-02 11:58:43: Removing file /etc/rc.d/rc3.d/S96ohasd
2010-02-02 11:58:43: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2010-02-02 11:58:43: Failed to remove file:
2010-02-02 11:58:43: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:43: Removing "/etc/rc.d/rc5.d/S96ohasd"
2010-02-02 11:58:43: Removing file /etc/rc.d/rc5.d/S96ohasd
2010-02-02 11:58:43: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2010-02-02 11:58:43: Failed to remove file:
2010-02-02 11:58:43: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:43: Removing "/etc/rc.d/rc0.d/K19ohasd"
2010-02-02 11:58:43: Removing file /etc/rc.d/rc0.d/K19ohasd
2010-02-02 11:58:43: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2010-02-02 11:58:43: Failed to remove file:
2010-02-02 11:58:43: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:43: Removing "/etc/rc.d/rc1.d/K19ohasd"
2010-02-02 11:58:43: Removing file /etc/rc.d/rc1.d/K19ohasd
2010-02-02 11:58:43: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2010-02-02 11:58:44: Failed to remove file:
2010-02-02 11:58:44: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:44: Removing "/etc/rc.d/rc2.d/K19ohasd"
2010-02-02 11:58:44: Removing file /etc/rc.d/rc2.d/K19ohasd
2010-02-02 11:58:44: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2010-02-02 11:58:44: Failed to remove file:
2010-02-02 11:58:44: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:44: Removing "/etc/rc.d/rc4.d/K19ohasd"
2010-02-02 11:58:44: Removing file /etc/rc.d/rc4.d/K19ohasd
2010-02-02 11:58:44: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2010-02-02 11:58:44: Failed to remove file:
2010-02-02 11:58:44: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:44: Removing "/etc/rc.d/rc6.d/K19ohasd"
2010-02-02 11:58:44: Removing file /etc/rc.d/rc6.d/K19ohasd
2010-02-02 11:58:44: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2010-02-02 11:58:44: Failed to remove file:
2010-02-02 11:58:44: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-02-02 11:58:44: The file ohasd has been successfully linked to the RC directories
2010-02-02 11:58:44: Starting ohasd
2010-02-02 11:58:44: itab entries=
2010-02-02 11:58:49: Created backup /etc/inittab.no_crs
2010-02-02 11:58:49: Appending to /etc/inittab.tmp:
2010-02-02 11:58:50: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2010-02-02 11:58:50: Done updating /etc/inittab.tmp
2010-02-02 11:58:50: Saved /etc/inittab.crs
2010-02-02 11:58:50: Installed new /etc/inittab
2010-02-02 11:58:55: ohasd is starting
2010-02-02 11:58:55: Checking ohasd
2010-02-02 11:58:55: ohasd started successfully
2010-02-02 11:58:55: Creating CRS resources and dependencies
2010-02-02 11:58:55: Configuring HASD
2010-02-02 11:58:55: Registering type ora.daemon.type
2010-02-02 11:58:59: Registering type ora.mdns.type
2010-02-02 11:59:00: Registering type ora.gpnp.type
2010-02-02 11:59:01: Registering type ora.gipc.type
2010-02-02 11:59:02: Registering type ora.cssd.type
2010-02-02 11:59:04: Registering type ora.cssdmonitor.type
2010-02-02 11:59:07: Registering type ora.crs.type
2010-02-02 11:59:08: Registering type ora.evm.type
2010-02-02 11:59:09: Registering type ora.ctss.type
2010-02-02 11:59:10: Registering type ora.asm.type
2010-02-02 11:59:13: Registering type ora.drivers.acfs.type
2010-02-02 11:59:14: Registering type ora.diskmon.type
2010-02-02 11:59:34: ADVM/ACFS is configured
2010-02-02 11:59:35: Successfully created CRS resources for cluster daemon and ASM
2010-02-02 11:59:35: Checking if initial configuration has been performed
2010-02-02 11:59:35: Starting CSS in exclusive mode
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.gipcd' on 'vis'
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.mdnsd' on 'vis'
2010-02-02 12:00:04: CRS-2676: Start of 'ora.gipcd' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2676: Start of 'ora.mdnsd' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.gpnpd' on 'vis'
2010-02-02 12:00:04: CRS-2676: Start of 'ora.gpnpd' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'vis'
2010-02-02 12:00:04: CRS-2676: Start of 'ora.cssdmonitor' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.cssd' on 'vis'
2010-02-02 12:00:04: CRS-2672: Attempting to start 'ora.diskmon' on 'vis'
2010-02-02 12:00:04: CRS-2676: Start of 'ora.diskmon' on 'vis' succeeded
2010-02-02 12:00:04: CRS-2676: Start of 'ora.cssd' on 'vis' succeeded
2010-02-02 12:00:04: Querying for existing CSS voting disks
2010-02-02 12:00:04: Performing initial configuration for cluster
2010-02-02 12:00:51: Start of resource "ora.ctssd -init" Succeeded
2010-02-02 12:00:51: Creating or upgrading OCR keys
2010-02-02 12:00:51: Command return code of 255 (65280) from command: /u01/app/11.2.0/grid/bin/ocrconfig -upgrade oracle oinstall
2010-02-02 12:00:51: Failed to create Oracle Cluster Registry configuration, rc 255
2010-02-02 12:00:51: Exiting exclusive mode
2010-02-02 12:00:51: Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
2010-02-02 12:00:51: Stop of resource "ora.crsd -init" failed
2010-02-02 12:00:51: Failed to stop CRSD
2010-02-02 12:01:20: Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_vis.log for detailsHi,
I am trying to setup Oracle 11gR2 RAC setup on RHEL 5.4 64-bit machine, during grid installation i am also getting the same error.
2010-07-12 03:12:42: Removing file /etc/rc.d/rc6.d/K19ohasd
2010-07-12 03:12:42: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2010-07-12 03:12:42: Failed to remove file:
2010-07-12 03:12:42: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2010-07-12 03:12:42: The file ohasd has been successfully linked to the RC directories
2010-07-12 03:12:42: Starting ohasd
2010-07-12 03:12:42: itab entries=
2010-07-12 03:12:47: Created backup /etc/inittab.no_crs
2010-07-12 03:12:47: Appending to /etc/inittab.tmp:
2010-07-12 03:12:47: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2010-07-12 03:12:47: Done updating /etc/inittab.tmp
2010-07-12 03:12:47: Saved /etc/inittab.crs
2010-07-12 03:12:47: Installed new /etc/inittab
2010-07-12 03:13:03: ohasd is starting
2010-07-12 03:13:03: Checking ohasd
2010-07-12 03:13:03: ohasd started successfully
2010-07-12 03:13:03: Creating CRS resources and dependencies
2010-07-12 03:13:03: Configuring HASD
2010-07-12 03:13:03: Registering type ora.daemon.type
2010-07-12 03:13:04: Registering type ora.mdns.type
2010-07-12 03:13:04: Registering type ora.gpnp.type
2010-07-12 03:13:04: Registering type ora.gipc.type
2010-07-12 03:13:05: Registering type ora.cssd.type
2010-07-12 03:13:05: Registering type ora.cssdmonitor.type
2010-07-12 03:13:06: Registering type ora.crs.type
2010-07-12 03:13:06: Registering type ora.evm.type
2010-07-12 03:13:07: Registering type ora.ctss.type
2010-07-12 03:13:07: Registering type ora.asm.type
2010-07-12 03:13:08: Registering type ora.drivers.acfs.type
2010-07-12 03:13:08: Registering type ora.diskmon.type
2010-07-12 03:13:35: ADVM/ACFS is configured
2010-07-12 03:13:35: Successfully created CRS resources for cluster daemon and ASM
2010-07-12 03:13:35: Checking if initial configuration has been performed
2010-07-12 03:13:35: Starting CSS in exclusive mode
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.gipcd' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.mdnsd' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2676: Start of 'ora.mdnsd' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2676: Start of 'ora.gipcd' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.gpnpd' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2676: Start of 'ora.gpnpd' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2676: Start of 'ora.cssdmonitor' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.cssd' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2672: Attempting to start 'ora.diskmon' on 'lodvmrhn3'
2010-07-12 03:14:04: CRS-2676: Start of 'ora.diskmon' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: CRS-2676: Start of 'ora.cssd' on 'lodvmrhn3' succeeded
2010-07-12 03:14:04: Querying for existing CSS voting disks
2010-07-12 03:14:05: Performing initial configuration for cluster
2010-07-12 03:14:06: Start of resource "ora.ctssd -init" Succeeded
2010-07-12 03:14:06: Creating or upgrading OCR keys
2010-07-12 03:14:06: Command return code of 255 (65280) from command: /u01/app/11.2.0/grid/bin/ocrconfig -upgrade oracle oinstall
2010-07-12 03:14:06: Failed to create Oracle Cluster Registry configuration, rc 255
2010-07-12 03:14:06: Exiting exclusive mode
2010-07-12 03:14:06: Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
2010-07-12 03:14:06: Stop of resource "ora.crsd -init" failed
2010-07-12 03:14:06: Failed to stop CRSD
2010-07-12 03:14:34: Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_lodvmrhn3.log for details
Please hel me to resole the issue.
I have followed exact steps mentioned in the http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnLinuxUsingNFS.php -
Problems with string larger char(255)
Hi guys ,
Something really weird happened to me , i have the following code to create a flat file , suddenly it is truncating the lines in 250 , its funny i see wa_ti_fich+330(5) in the debugging and it has data , but the whole wa_ti_fich is only 255 long , ive tried with type char600 , with the same result , i cant use type string beacuse is not allow for unix file .
data: begin of ti_fich occurs 0,
linha(527),
end of ti_fich .
wa_ti_fich-linha+49(15) = montante.
wa_ti_fich-linha+64(2) = '02'. "codigo moeda 02
wa_ti_fich-linha+106(2) = '01'. "Codigo de la situación.
wa_ti_fich-linha+112(8) = itab_saida-datav.
wa_ti_fich-linha+120(8) = itab_saida-datav.
wa_ti_fich-linha+128(8) = montante.
wa_ti_fich-linha+143(2) = '02'.
wa_ti_fich-linha+185(2) = '01'. " Naturaleza titular
wa_ti_fich-linha+187(10) = itab_saida-stceg+2(10).
wa_ti_fich-linha+197(1) = '2'. " Formato do nombre
wa_ti_fich-linha+198(110) = itab_saida-name1.
wa_ti_fich-linha+329(1) = '2'.
wa_ti_fich-linha+330(110) = itab_saida-stras.
wa_ti_fich-linha+446(50) = itab_saida-ort01." nom_mun :
wa_ti_fich-linha+496(2) = itab_saida-regio.
wa_ti_fich-linha+501(5) = itab_saida-pstlz.
append wa_ti_fich to ti_fich .
please don send me links for scn or google with similar subjects because i ve already checked it , believe me .
thank255 is the maximum output lengh for CHAR variables in the Old Debugger. So it is normal that you don't see the end of the string in the Old Debugger.
If you have a newer R/3-Release you can use the New Debugger and choose the output format "Tabular". In this display format, the contents are portioned into 50 characters each and thus you'll see the complete string. In older R/3-Releases, where the New Debugger is not yet available, you will have to input manually offsets in the debugger to see the complete string. -
Dynamic SQL and 255 bytes per line limit
I would like to create a Dynamic SQL statement that is longer than 255 bytes. What do I need to do to embed a carriage return or something so that the resultant string is broken up into multiple lines?
Please ignore. This was a stupid question!
-
Crystal Reports XI String [255] limit with the File System Data driver...
I was trying to create a Crystal Reports XI report to return security permissions of files and folders. I have been able to successfully connect and return data using the File System Data driver as the Data Source; however the String limit on the ACL NT Security Field is 255 characters. The full string of data to be returned can be much longer than the 255 limit and I cannot find how to manipulate that parameter.
I am currently on Crystals XI and Crystal XI R2 and have applied the latest service packs but still see the issue. My Crystal Reports Database DLL for File System data ( crdb_FileSystem.dll ) is at Product Version 11.5.10.1263.
Is it possible to change string limits when using the File System Data driver as the Data Source? If so, how can that be accomplished. If not, is there another method to retrieve information with the Windows File System Data being the Data Source? Meaning, could I reach my end game objective of reporting on the Windows ACL's with Crystal through another method?Hello,
This is a known issue. Early versions you could not create folder structures longer than 255 characters. With the updates to the various OS's this is now possible but CR did not allocate the same space required.
It's been tracked as an enhancement - ADAPT01174519 but set for a future release.
There are likely other ways of getting the info and then putting it into an Excel file format and using that as the data source.
I did a Google search and found this option: http://www.tomshardware.com/forum/16772-45-display-explorer-folders-tree-structure-export-excel
There are tools out there to do this kind of thing....
Thank you
Don
Note the reference to msls.exe appears to be a trojan: http://www.greatis.com/appdata/d/m/msls.exe.htm so don't install it.
Edited by: Don Williams on Mar 19, 2010 8:45 AM -
Subnet mask 255.255.255.255 assigned to VPN client - can't ping LAN
Hi,
I configured PIX 501 with PPTP VPN to connect to the small office (PIX FW, Win 2000 Server, several Win clients, LAN IP 10.0.0.X/24):
ip local pool mypool 10.0.0.101-10.0.0.105
vpdn group mygroup accept dialin pptp
vpdn group mygroup ppp authentication mschap
vpdn group mygroup ppp encryption mppe 128 required
vpdn group mygroup client configuration address local mypool
vpdn group mygroup client configuration dns 10.0.0.15
vpdn group mygroup pptp echo 60
vpdn group mygroup client authentication local
vpdn username xxxx password *********
vpdn enable outside
I can connect to the office using Win VPN client, but I can't ping any hosts in the office network. I suspect that the reason for that is subnet mask assigned to the VPN client: 255.255.255.255. ipconfig of the VPN client:
PPP adapter Office:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.0.0.101
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
Default GW is missing too, but I think this is not the main problem.
Any way, what is wrong with my config? How to fix subnet mask assigned to clients? Or may be my assumption is wrong and this mask is ok? What is wrong then?
Any input will be greatly appreciated!
GeorgeThanks for the prompt reply.
Here it does:
PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
hostname OSTBERG-PIX
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 80 permit ip 10.0.0.0 255.255.255.0 10.0.20.0 255.255.255.0
access-list inbound permit icmp any any
access-list inbound permit tcp any any eq pptp
access-list inbound permit gre any any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 66.189.xxx.xxx 255.255.252.0
ip address inside 10.0.0.23 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool mypool 10.0.0.101-10.0.0.105
pdm location 10.0.0.0 255.255.255.0 inside
pdm location 10.0.0.15 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group inbound in interface outside
route outside 0.0.0.0 0.0.0.0 66.189.yyy.yyy 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
telnet 10.0.0.23 255.255.255.255 inside
telnet 10.0.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group mygroup accept dialin pptp
vpdn group mygroup ppp authentication mschap
vpdn group mygroup ppp encryption mppe 128 required
vpdn group mygroup client configuration address local mypool
vpdn group mygroup client configuration dns 10.0.0.15
vpdn group mygroup pptp echo 60
vpdn group mygroup client authentication local
vpdn username ********* password *********
vpdn enable outside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:xxx
: end
There are remnants of old config, I just recently took over this network, some lines look odd to me, but I did not touch what works. VPN config is all mine.
PIX internal 10.0.0.23 - is a gateway for the network. DNS server in LAN - 10.0.0.15.
I've been reading about the problem and came across several posts that this subnet mask is normal, but it puzzles me - how can this host communicate with anyone else if there is no room for other hosts in this network (according to the mask)?!
Thanks again!
George -
How can I properly export video w/ bars to Rec709 (16-235 in 8-bit) from Premiere's RGB (0-255)?
I have hit some real frustrations in working with Premiere to meet broadcast Rec709 standards for DVD & Blu-Ray. Avid Symphony works in a Rec709 space and clearly operates with its video signal from 16-235 (which matches IRE 7.5 to 100), but Premiere doesn't seem to have this understanding in its programming and engineering. Here are my issues:
1) I can't manually enter in the digital values in the RGB Curve tool's points. Why would Premiere's engineers lock this basic feature out? It's in Photoshop.
2) I can't properly export Premiere's color bars. In order to export to Rec709 standards, to get around issue #1, I hack into the RGB Curves preset XML file to lift the Master Curve's point 1 from 0 to 16 and set the final white point from 255 to 235. If I use Premiere's bars, on the waveform, I can see the sub-black values, but when I lift the blacks with the curves preset, it clips all sub-black values upon export. WHY?! To get around this problem, I import bars generated by a camera (for example, by a Sony EX-350, i.e. XDCAM footage). All of this wouldn't be an issue if there were an export function that specifies exporting to rec709's 16-235 values instead of 0-255, as Avid does.
3) Particularly, the Waveform scope lies to me. The 7.5 IRE setup button does NOTHING for me, it's just a preview option that causes more confusion than clarity. Does Premiere map 0 out of 0-255 as 0 IRE or 7.5 IRE? I think it does the former and just uses that setup button to make you think that it's at 7.5. so if you do set it to 7.5, how then do you export it to match that option? Also, why can't the waveform scope have multiple options for the units - not just IRE, but also digital values (8-bit, 10-bit, linearized, etc.)?!
4) Speaking of importing the bars and footage. To continue the example of the Sony EX-350 - it imports the bars automatically by putting the black values at 0 IRE, not 7.5 IRE.
If Adobe wants industry professionals to take Premiere seriously, it needs to open up these options and clearly present what happens to tonal values in the image. It's very frustrating to figure out all of these problems and create cockamamy work-arounds.
http://www.avsforum.com/avs-vb/showthread.php?t=1090642
http://www.glennchan.info/articles/technical/setup/75IREsetup.htmlSteve,
Thanks for your reply! However, I hope you don't take my response the wrong way, but, with no meaning of disrespect to you personally, the notion that curves are the wrong tool for numeric adjustments extremely infuriates me and displays a real lack of understanding of why a colorist or cinematographer such as myself would want to use curves in the first place.
First, any LUT generation program or coloring program, such as Apple Color, gives complete access to numerical control to give precise, repeatable changes that you cannot get with the drag of a mouse. Photoshop, Avid Symphony, etc. all have curves tools with the ability to manually enter points.
Second, on a user level, there should be no wrong tool for numeric adjustments, especially curves - they are the most precise means to obtain a specific contrast response. Levels or RGB corrector will only give gamma, pedestal, and gain operations, but curves gives every possible shape of a contrast response in between. If I wanted to create a very specific S-curve, I must use the curves tool to do so.
Third, the question at hand is not Premiere Pro's ability to process natively in Rec709 with signal from 16-235 - Premiere's native ability to process all types of video input is the sole reason why I've switched to it as a platform. 'Sub-black values are not necessarily clamped'?! How then can I export a TIFF, for example, of Premiere's bars, with the sub-black values left intact? How do I even access these sub-black values, when all footage clips below 0 IRE? The primary question is, how does Premiere handle and export these IRE values with respect to digital values, whether they are 8-bit, 10-bit, 12-bit, etc.?
Adobe's video workflow lacks a concise, cohesive FAQ or explanation of its numerical signal chain. At least, I have missed it and can't find it anywhere. If I want to properly color grade footage with a proper final output in mind, I need to know my end goals to take the proper intermediary steps.
SteveHoeg wrote:
Hey Tim - Premiere Pro can process natively in Rec709 with signal from 16-235 you do not need special adjustments. Curves are the wrong tool for numeric adjustments, try Levels or RGB Corrector. Sub black values are not necessarily clamped on export. --sh -
Download greater than 255 characters from alv into excel sheet
Hi,
I have an ALV grid display report where the last field contains close to 600 characters of text.
When I use the Export -> Local File -> Spreadsheet option and save it in an excel sheet, only first 255 characters are getting downloaded into excelsheet and rest is not gettting downloaded.
Solution I have is: Keep a button on the screen. If that button is clicked, use GUI_DOWNLOAD FM and the entire text (all 600 chars) gets downloaded.
Is there any other solution to the above problem?
I tried downloading the alv report into XML format and opened as an excel document, but even then only first 255 characters are apearing in excel cell.
The domain has length 2048 chars for the final internal table in alv, so there is no problem with data element or domain.
OIn debugging mode, I am able to see all the 600 chars in the final internal table before alv display.
It looks like there is a constraint in alv that is can display only 255 characters in a cell.
ALso, I tried converting the grid display to list display and then download into excel , but the result is same.
Please help.please search first:
http://www.sdn.sap.com/irj/scn/advancedsearch;jsessionid=%28J2EE3417400%29ID0634234250DB10563517489488469157End?query=downloadmorethan255char -
ALV report output more than 255
Hi All,
I have write alv list report
when i declare like
WRITE: / SY-ULINE(265).
it gave me error " Length specification "(265") exceeds fields length ("255").
i also write in report heading
"REPORT ZSIMPLE line-SIZE 500."
Where is the problem.
Thanks In Advance.
Regards,
SamThe field SY-ULINE is defined as 255 characters long (check via SE11 on SYST structure or read [ABAP System Fields |http://help.sap.com/abapdocu_70/en/ABENSYSTEM_FIELDS.htm]), so you cannot use the first 265 characters (that is what SY-ULINE(265) means), try to WRITE: SY-ULINE(255), SY-ULINE(10). (The maximum line size of a report is 1023 - [LINE-SIZE width|http://help.sap.com/abapdocu_70/en/ABAPREPORT_LIST_OPTIONS.htm#!ABAP_ADDITION_2@2@])
Regards,
Raymond -
How to display more than 255 characters in the report
Hi all,
In my program, i try to output a variable type c length 500 in the report. But this report still keep on display 255 characters only although i had set the line-size to 500.
Is there any method output all characters?
thanks,
JaniceHi Janice Yeoh,
I am assuming this is classical report......And just need to do is increase the line-size in report statement. Find below for small example which i ve tried..
REPORT ytest1 LINE-SIZE 500.
DATA : BEGIN OF it OCCURS 500,
v TYPE c,
END OF it.
DO 503 TIMES.
IF sy-index = 500.
WRITE '500'.
ELSE.
WRITE : 'X' NO-GAP.
ENDIF.
ENDDO.
Dont forgot to Reward me points .....All the very best....
Regards,
Sreenivasa sarma K. -
Problems Printing to Shared Windows Printer Via SAMBA (foomatic error 255)
I can NOT print from my MacBookPro to a printer that's shared out from my Windows PC. Of course, printing to this same printer from my PC works fine.
Please help me resolve this printing problem.
Read on for more details regarding my printing woes!
I can successfully setup my printer on the MAC side using the Printer Setup utility. I see the shared out printer on my MAC; I can pick the printer's manufacturer and model. Everything looks ok regarding the setup of the printer on the MAC side.
However, when I try to print a file from the MAC, the printer never prints. The print job appears to get queued on the MAC side. However, after a few seconds, the printer queue displays "foomatic-rip stopped unexpectedly with error 255" (if I selected a foomatic printer driver from the hpijs). Otherwise, it says "NTSTATUS_NOMEMORY" error (if I selected a gutenprint driver instead).
The PC's Windows event logs show no problems. Indeed, the Security event log shows successful authentication & access to the printer.
The MAC's CUPS error_log displays the these error messages:
GutenPrint fails with NTSTATUS_NOMEMORY error, then says Cannot connect to SAMBA host
hpjisGhostscriptFoomatic fails with "The process 'foomatic-rip' stopped unexpectedly with status 255"
Later, I will post the exact entries from this log (I am currently separated from my MAC laptop until later this evening).
My Apple MacBookPro is running MAC OS X 10.4.11 ("Tiger"). The printer is an HP DeskJet 5150 connected via a USB port to my DELL 8400 PC. This desktop PC is running Microsoft's "Windows XP Pro Service Pack 2").
Based on reading other posts (here) and at the Linux Open Foundation (printing), I have already done the following:
Installed gutenprint;
Installed foomatic (foomatic-rip v3.42.2.15);
Installed ghostscript (espgs v7.07.1); &
Installed hpijs (hpijs v2.7.10).
NOTE: This is NOT the same problem that I posted earlier regarding inability to print to a shared printer with Leopard (MAC OS X 10.5.0). Today's posting deals with my inability to print to the shared printer from Tiger (MAC OS X 10.4.11).
NOTE: This may be a "red herring" but you may need this additional background to help resolve my printing problem. Originally, I ran "Tiger" (MAC OS X 10.4.10) on my MacBookPro laptop. Of course, networked printing worked fine at this point. On October 28, 2007, I upgraded to "Leopard" (MAC OS X 10.5.0). Leopard was a "disaster" for me (printing, networking & many other problems). On November 9, 2007, I "punted" and re-installed "Tiger" (MAC OS X 10.4.10) from Apple's original CD. On November 15, 2007, I upgraded to MAC OS X 10.4.11 via Apple's software update utility. I vaguely recollect that networked printing was working after I returned back to Tiger.
/s/
Tony H.As promised in my initial post regarding my printing problem, here are the actual error messages displayed in the Print Queue (Hp5150) and the "cups" error_log when I try to print any file to my HP 5150 that's directly connected to my DELL PC (Windows XP Pro) but shared out so that my MacBookPro should be able to print to it.
Printer Queue Hp5150 window displays:
=========================
The process "foomatic-rip" stopped unexpectedly with status 255.
/var/log/cups/error_log displays:
=====================
I [04/Jan/2008:20:25:17 -0500] Job 3 queued on 'hp5150' by 'anthonyhackenberg'.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/cgpdftops (PID 681) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/pstops (PID 682) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 683) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started backend /usr/libexec/cups/backend/smb (PID 684) for job 3.
E [04/Jan/2008:20:25:17 -0500] [Job 3] Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:25:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...Insecure $ENV{PATH} while running setuid at /usr/libexec/cups/filter/foomatic-rip line 215.
E [04/Jan/2008:20:25:17 -0500] PID 683 stopped with status 255!
I [04/Jan/2008:20:25:17 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [04/Jan/2008:20:26:17 -0500] [Job 3] Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:27:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:28:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY
Again, the system Event logs on the Windows XP side show no error messages. In particular, the Security Event Log shows that authentication was successful; so, the MacBookPro's client process was granted access to the printer on the DELL PC side of the transaction.
Message was edited by: ClassicalApproach -
Excel 2007 to Sql server table. Column with more than 255 characters.
Hi there,
I am facing a problem while converting data from Excel 2007 to SQL server 2005 table. I am using BIDS 2005.I have an excel file where one particular column has more than 255 characters. I use OLEDB connection for excel file as there is no driver for Excel
2007 in BIDS2005. I am using Microsoft Office 12.0 Access Database Engine OLE DB Provider for Excel file.
Next, I changed advanced properties for the column to DT_NTEXT. But when I am getting errors on execution. They are:
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
[OLE DB Source [1949]] Error: Failed to retrieve long data for column "action".
[OLE DB Source [1949]] Error: There was an error with output column "action" (2046) on output "OLE DB Source Output" (1959). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "action" (2046)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "action"
(2046)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Please advise on how can I deal with columns having more than 255 characters in Excel file.
Thanks!Here is what your connection string should look like for excel source
Provider
=Microsoft.Jet.OLEDB.4.0;Data
Source=c:\temp\test.xls;Extended
Properties="EXCEL 8.0;HDR=YES";
http://sqlworkday.blogspot.com/ -
Spool list output truncated after 255 char
Hi,
I'm using ALV list(FM: Reuse_alv_list_display) in my report. When it is run in background, the output is sent to spool. The problem is the list is truncated after 255 characters.
Is there any way to display more than 255 characters in spool? So that it can be downloaded to a spreadsheet from spool.
ThanksHi,
in the report-statement you can define the line-size of your list. I expect, you haven set the line-size!
Try this one:
REPORT Zxxxxx line-size 300.
Normaly the program searches the the layout that fits to your selected printer (done by FM 'RSPO_LIST_LAYOUT_FITS').
Regards,
Martin -
Spool List output display 255 char when the rpt is run in Background
Hi Friends,
I tried executing a program in Background.. The report output has more than 64 columns ( more than 255 char ) ..
Iam using "REUSE_ALV_GRID_DISPLAY" for displaying the list.
My Problem:
1. The spool list is truncated after 255 characters when i run in background.
2. Th output in Spool List is coming in 2 rows ... not very clear ... becoz of that the grid lines are not getting displayed.
3. I ve not used any Standard - line size for dislaying ..
4. In foreground i am able to display all the 64 columns... Y not in Background......
5. My Printer setting is ..X_255 .... only ...
Requirement:
1. What should i do to increase the spool list display to more than 255 characters
2. Or how to save the background run reports output to an excel sheet as how we 'll take the from the foreground.
Expecting your answers,
Thanks in Advance...
Cheers,
R.Kripa .........
Enjoy ABAPing ..........
new upcoming Abaper ....Hello Kripa,
You need to perform two actions.
1. set an appropriate format for the printer you are using. As explained from the previous messages you go to: SPAD -> output devives (type the printer you are using) -> from the menu ..-> goto -> device type -> formats. In there create a new format like Z_65_650
or Z_65_xxxx where xxxx could be up to 1065. This is the length of your report.
When you give your report in background, do not forget to choose the new format you created.
2. After the spool request is created, you take its number and use it ar a parameter in the following report.
Please copy and paste it in a new program, maybe called ZRSPOSHOWSPOOLLIST.
It should work then.
roxani
Display spool list > 255 columns
This is a SAP utility report to allow display of
spool request lists with line size more than 255 characters in
releases 4.6B and 4.6C (4.6D kernel must be used)
REPORT ZRSPOSHOWLIST LINE-SIZE 80.
PARAMETERS: RQIDENT LIKE TSP01-RQIDENT,
FIRSTL TYPE I DEFAULT 0,
LASTL TYPE I DEFAULT 0.
global data from LSPOXTOP
DATA: RC(10) TYPE C,
ERRMSG(100) TYPE C,
STATUS LIKE SY-SUBRC,
DSN_TYPE(8) TYPE C.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
DATA_LINE(5000), "MODAB
END OF DATA_SET_LINE,
DATA_SET_LENGTH(5) TYPE C.
TABLES: TSP01, TST05, TSPOPTIONS.
DATA: TEMSE_NAME LIKE TST01-DNAME,
TEMSE_CLIENT LIKE TST01-DCLIENT,
TEMSE_HANDLE LIKE RSTSTYPE-HANDLE,
TEMSE_PART LIKE TST01-DPART,
TEMSE_OBJTYP LIKE TST01-DTYPE,
TEMSE_RECTYP LIKE RSTSTYPE-RECTYP,
TEMSE_CHARCO LIKE TST01-DCHARCOD.
DATA: IS_OTF.
global data from LSPOCTOP
DATA: BEGIN OF SPOC
, escape
, prtctrl
, FIRST_BYTES(4) " collection of the first bytes of the
" escape sequences, which I am searching for.
, PRTCTRL_START_LENGTH TYPE I
, PRTCTRL_TOTAL_LENGTH TYPE I
, PRTCTRL_START(10)
, SYMBOL_LOW_START(10)
, SYMBOL_HGH_START(10)
, SYMBOL_START_LENGTH TYPE I
, ICON_START(10)
, ICON_START_LENGTH TYPE I
, ICON_SEL TYPE I VALUE 1
, FRAME_START(10)
, FRAME_START_LENGTH TYPE I
, END OF SPOC.
FIELD-SYMBOLS: <SPOC_PRTCTRL> TYPE C
, <SPOC_FRAME> TYPE C
, <SPOC_ICON> TYPE C
, <SPOC_SYMBOL_LOW> TYPE C
, <SPOC_SYMBOL_HGH> TYPE C
copied from RSPO_DISPLAY_ABAP_SPOOLJOB
DATA: BUFFER LIKE DATA_SET_LINE OCCURS 1000.
TABLES: TSP02L.
SELECT SINGLE * FROM TSP01 WHERE RQIDENT = RQIDENT.
IF SY-SUBRC <> 0.
WRITE: / 'Spool request does not exist:'(001), RQIDENT.
EXIT.
ENDIF.
CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
EXPORTING
ACCESS = 'DISP'
SPOOLREQ = TSP01
EXCEPTIONS
NO_PERMISSION = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
WRITE: / 'No authorization to display'(002).
EXIT.
ENDIF.
PERFORM READ_DATA TABLES BUFFER
USING TSP01 FIRSTL LASTL.
IF SY-SUBRC <> 0.
WRITE: / 'Error reading spoolo request'(003).
EXIT.
ENDIF.
IF IS_OTF = 'X'.
WRITE: / 'This spool request is not an ABAP list'(004).
EXIT.
ENDIF.
PERFORM DISPLAY_DATA TABLES BUFFER USING TSP01-RQPAPER TSP01-RQIDENT.
FORM GET_SPOOL_LINE.
DO.
IF TEMSE_RECTYP+1(1) = 'Y'.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE
ID 'BUFFLG' FIELD 1006
ID 'BUFFLG' FIELD 5006 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ELSE.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE+1
ID 'BUFFLG' FIELD 1005
ID 'BUFFLG' FIELD 5005 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
DATA_SET_LINE(5) = DATA_SET_LINE+1(5).
DATA_SET_LINE-PRECOL = ' '.
ADD 1 TO DATA_SET_LINE-DATA_LENGTH.
ENDIF.
STATUS = SY-SUBRC.
IF STATUS <> 6. " EOF, error condition, or got data
EXIT.
ENDIF.
end of this part, try to open next part
ADD 1 TO TEMSE_PART.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT "hjl
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
STATUS = SY-SUBRC.
ENDIF.
IF STATUS = 0.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDIF.
ENDDO.
IF STATUS = 4.
STATUS = 12. "EOF
ENDIF.
IF STATUS = 8.
STATUS = 40. "Line too long
ENDIF.
DATA_SET_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDFORM.
FORM READ_DATA TABLES BUFFER
USING TSP01 LIKE TSP01 VALUE(FIRST) TYPE I
VALUE(LAST) TYPE I.
DATA: LINES TYPE I.
REFRESH BUFFER.
CLEAR IS_OTF.
TEMSE_CLIENT = TSP01-RQCLIENT.
TEMSE_NAME = TSP01-RQO1NAME.
TEMSE_PART = 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
IF SY-SUBRC = 0.
IF TEMSE_OBJTYP(3) = 'OTF'.
IS_OTF = 'X'.
ENDIF.
ELSE.
EXIT.
ENDIF.
CLEAR TEMSE_HANDLE.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DO.
PERFORM GET_SPOOL_LINE.
IF STATUS <> 0 AND STATUS <> 40 AND STATUS <> 12.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF STATUS <> 12. " 12 = End
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET_LINE-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
ADD 1 TO LINES.
IF LINES >= FIRST.
APPEND DATA_SET_LINE TO BUFFER.
ENDIF.
IF ( NOT LAST IS INITIAL ) AND ( LINES >= LAST ).
EXIT.
ENDIF.
ELSE.
IF LINES = 0.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF LINES < FIRST .
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
EXIT.
ENDIF.
ENDDO.
PERFORM CLOSE_JOB.
ENDIF.
ENDFORM.
FORM CLOSE_JOB *
FORM CLOSE_JOB.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
ENDFORM.
FORM DISPLAY_DATA TABLES BUFFER USING RQPAPER LIKE TSP01-RQPAPER
RQID LIKE TSP01-RQIDENT.
DATA: LINE_LENGTH TYPE I, GCOL TYPE I, GLINES TYPE I,
LINE_LENGTH2 LIKE RSTSTYPE-LINELENGTH,
V, V2.
CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
PERFORM SPOOLDATA_WRITE_INIT. "MODAB
select single * from tspoptions where spoption = 'REALWIDTH'.
if sy-subrc = 0.
V = 'X'.
endif.
select single * from tspoptions where spoption = 'REALHEIGHT'.
if sy-subrc = 0.
V2 = 'X'.
endif.
IF NOT V IS INITIAL OR NOT V2 IS INITIAL.
GCOL = 0.
GLINES = 0.
SELECT SINGLE * FROM TSP02L WHERE PJIDENT = RQID
AND PJNUMMER = 0.
IF SY-SUBRC = 0.
GCOL = TSP02L-COLUMNS.
GLINES = TSP02L-LINES.
ELSE.
CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
EXPORTING
LAYOUT = RQPAPER
IMPORTING
ANSWER =
COLUMNS = GCOL
LINES = GLINES
PFORMAT =
ENDIF.
ENDIF.
IF GCOL < 80 OR V IS INITIAL.
GCOL = 255.
ENDIF.
IF GLINES < 5 OR V2 IS INITIAL.
GLINES = 0.
ENDIF.
IF GCOL >= 1024. "MODAB
GCOL = 1023.
ENDIF.
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE GCOL
LINE-COUNT GLINES. " make a wide list
SET BLANK LINES ON.
LOOP AT BUFFER.
DATA_SET_LINE = BUFFER.
IF DATA_SET_LINE-PRECOL = 'P'.
IF DATA_SET_LINE(1) = ' '. " Echter Vorschub ?"
NEW-PAGE.
ENDIF.
CONTINUE.
ENDIF.
Zeilenlange berechnen, falls unbekannt.
IF DATA_SET_LINE-DATA_LENGTH IS INITIAL.
LINE_LENGTH = STRLEN( DATA_SET_LINE-DATA_LINE ).
ELSE.
LINE_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDIF.
IF LINE_LENGTH > 0.
LINE_LENGTH2 = LINE_LENGTH.
PERFORM SPOOLDATA_WRITE USING DATA_SET_LINE-DATA_LINE "MODAB
LINE_LENGTH2
1.
ELSE.
" Leerzeile
SKIP.
ENDIF.
ENDLOOP.
ENDFORM.
copied from RSPO_SPOOLDATA_WRITE
FORM SPOOLDATA_WRITE USING VALUE(SPOOL_DATA)
VALUE(DATA_LENGTH) LIKE RSTSTYPE-LINELENGTH
VALUE(START_POS) LIKE SY-COLNO.
function globals
DATA: LPOS LIKE SY-COLNO
, REST_LEN TYPE I
, AREA_LEN TYPE I
, NEXT_HOT TYPE I " offset of next special character
, COLS TYPE I " columns used by special character
, BYTES TYPE I " bytes used by special character
, HOT2
, HOT3
, HOT4
, HOT5
, HOT6
, HOT7
, BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
, THE_PRTCTRL(5) TYPE C
Because of a problem within the ABAP listprocessing, I shall
never output the same icon side by side with the same color
and without a gap.
As I don't know the data, I will use two different variables
alternatively.
, ICON_ID1 LIKE ICONS-L4
, ICON_ID2 LIKE ICONS-L4.
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
, <HOT_PRTCTRL>
, <HOT_FRAME>
, <HOT_ICON>
, <HOT_SYMBOL>
IF START_POS < 2.
write at / ' ' no-gap.
NEW-LINE.
LPOS = 1.
ELSE.
LPOS = START_POS.
ENDIF.
REST_LEN = STRLEN( SPOOL_DATA ).
DESCRIBE FIELD SPOOL_DATA LENGTH AREA_LEN.
IF DATA_LENGTH = 0.
" fine.
ELSEIF DATA_LENGTH <= AREA_LEN.
REST_LEN = DATA_LENGTH.
ELSE.
WRITE: / 'Fehler beim Decodieren der Listendaten'(005).
STOP.
ENDIF.
CHECK REST_LEN > 0.
ASSIGN SPOOL_DATA(REST_LEN) TO <LDATA>.
WHILE <LDATA> CA SPOC-FIRST_BYTES.
NEXT_HOT = SY-FDPOS.
IF NEXT_HOT > 0.
ASSIGN <LDATA>(NEXT_HOT) TO <PLAIN_TEXT>.
MODAB
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
NEXT_HOT
LPOS.
WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
ADD NEXT_HOT TO LPOS.
SUBTRACT NEXT_HOT FROM REST_LEN.
ASSIGN <LDATA>+NEXT_HOT(REST_LEN) TO <LDATA>.
ENDIF.
IF REST_LEN >= SPOC-PRTCTRL_START_LENGTH.
ASSIGN <LDATA>(SPOC-PRTCTRL_START_LENGTH) TO <HOT_PRTCTRL>.
ELSE.
ASSIGN 'too_short' TO <HOT_PRTCTRL>.
ENDIF.
IF REST_LEN >= SPOC-FRAME_START_LENGTH.
ASSIGN <LDATA>(SPOC-FRAME_START_LENGTH) TO <HOT_FRAME>.
ELSE.
ASSIGN 'too_short' TO <HOT_FRAME>.
ENDIF.
IF REST_LEN >= SPOC-ICON_START_LENGTH.
ASSIGN <LDATA>(SPOC-ICON_START_LENGTH) TO <HOT_ICON>.
ELSE.
ASSIGN 'too_short' TO <HOT_ICON>.
ENDIF.
IF REST_LEN >= SPOC-SYMBOL_START_LENGTH.
ASSIGN <LDATA>(SPOC-SYMBOL_START_LENGTH) TO <HOT_SYMBOL>.
ELSE.
ASSIGN 'too_short' TO <HOT_SYMBOL>.
ENDIF.
IF REST_LEN > 1.
HOT2 = <LDATA>+1(1).
IF REST_LEN > 2.
HOT3 = <LDATA>+2(1).
IF REST_LEN > 3.
HOT4 = <LDATA>+3(1).
ELSE.
HOT4 = '?'.
ENDIF.
ELSE.
HOT3 = '?'.
ENDIF.
ELSE.
HOT2 = '?'.
ENDIF.
IF <HOT_FRAME> = <SPOC_FRAME>.
COLS = 1. " in most cases.
BYTES = 2. " in most cases.
CASE HOT2.
WHEN '0'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '1'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '2'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '3'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '4'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '5'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '6'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '7'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '8'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '9'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ':'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ';'. " box_drawings_light_left
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '<'. " box_drawings_light_up
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '='. " box_drawings_light_right
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '>'. " box_drawings_light_down
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '?'. " drawings_checkbox_off
WRITE AT LPOS ' ' AS CHECKBOX INPUT OFF NO-GAP.
WHEN '@'. " drawings_checkbox_on
WRITE AT LPOS 'X' AS CHECKBOX INPUT OFF NO-GAP.
WHEN OTHERS.
BYTES = 0.
ENDCASE.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_LOW>.
ESCAPE_TRICK = HOT3.
SUBTRACT 32 FROM ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_HGH>.
ESCAPE_TRICK = HOT3.
ADD 32 TO ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_ICON> = <SPOC_ICON>.
IF SPOC-ICON_SEL >< 1.
SPOC-ICON_SEL = 1.
ICON_ID1 = '@00@'.
ICON_ID1+1(1) = HOT3.
ICON_ID1+2(1) = HOT4.
ELSE.
SPOC-ICON_SEL = 2.
ICON_ID2 = '@00@'.
ICON_ID2+1(1) = HOT3.
ICON_ID2+2(1) = HOT4.
ENDIF.
IF REST_LEN > 4.
HOT5 = <LDATA>+4(1).
IF REST_LEN > 5.
HOT6 = <LDATA>+5(1).
IF REST_LEN > 6.
HOT7 = <LDATA>+6(1).
ELSE.
HOT7 = '?'.
ENDIF.
ELSE.
HOT6 = '?'.
ENDIF.
ELSE.
HOT5 = '?'.
ENDIF.
IF HOT5 = SPACE.
IF HOT6 = SPACE.
IF HOT7 = SPACE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(4) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(4) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 4.
BYTES = 7.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(3) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(3) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 3.
BYTES = 6.
ENDIF.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(2) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(2) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 2.
BYTES = 5.
ENDIF.
ELSE.
"rite at lpos(1) icon_id as icon.
WRITE AT LPOS(1) '#' NO-GAP. " Not enough space for any icon.
COLS = 1.
BYTES = 4.
ENDIF.
ENDIF.
IF <HOT_PRTCTRL> = <SPOC_PRTCTRL>.
COLS = 0. " in most cases.
BYTES = 6. " in most cases.
IF REST_LEN >= SPOC-PRTCTRL_TOTAL_LENGTH.
THE_PRTCTRL = <LDATA>+SPOC-PRTCTRL_START_LENGTH(5).
IF THE_PRTCTRL = 'SABLD'.
FORMAT INTENSIFIED ON.
"no 3.0 'SAULN'.
"no 3.0 FORMAT UNDERSCORED ON.
ELSEIF THE_PRTCTRL = 'SAOFF'.
FORMAT INTENSIFIED OFF.
"no 3.0 FORMAT UNDERSCORED OFF.
ELSEIF THE_PRTCTRL(3) = 'COL'.
CASE THE_PRTCTRL+3(1).
WHEN '0'.
FORMAT COLOR OFF.
WHEN '1'.
FORMAT COLOR 1.
WHEN '2'.
FORMAT COLOR 2.
WHEN '3'.
FORMAT COLOR 3.
WHEN '4'.
FORMAT COLOR 4.
WHEN '5'.
FORMAT COLOR 5.
WHEN '6'.
FORMAT COLOR 6.
WHEN '7'.
FORMAT COLOR 7.
ENDCASE.
CASE THE_PRTCTRL+4(1).
WHEN 'N'.
FORMAT INTENSIFIED OFF INVERSE OFF.
WHEN 'H'.
FORMAT INTENSIFIED ON INVERSE OFF.
WHEN 'V'.
FORMAT INTENSIFIED ON INVERSE ON.
ENDCASE.
ENDIF. "printcontrol
ELSE. "??
ENDIF.
ENDIF.
IF BYTES = 0.
BYTES = 1.
WRITE AT LPOS(1) '#'.
COLS = 1.
ENDIF.
ADD COLS TO LPOS.
SUBTRACT BYTES FROM REST_LEN.
IF REST_LEN > 0.
ASSIGN <LDATA>+BYTES(REST_LEN) TO <LDATA>.
ELSE.
EXIT.
ENDIF.
ENDWHILE.
MODAB
IF REST_LEN > 0.
ASSIGN <LDATA>(REST_LEN) TO <PLAIN_TEXT>.
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
REST_LEN
LPOS.
ENDIF.
ENDFORM.
FORM WRITE_BIGFIELD USING VALUE(FIELD) TYPE C
VALUE(LEN)
VALUE(POS).
FIELD-SYMBOLS <P>.
DATA: CHUNK TYPE I.
WHILE LEN > 0.
IF LEN > 255.
CHUNK = 255.
ELSE.
CHUNK = LEN.
ENDIF.
WRITE AT POS FIELD(CHUNK) NO-GAP.
ADD CHUNK TO POS.
LEN = LEN - CHUNK.
IF LEN > 0.
FIELD = FIELD+CHUNK.
ENDIF.
ENDWHILE.
ENDFORM.
FORM SPOOLDATA_WRITE_INIT.
DATA: BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
ESCAPE_TRICK-X1 = '1C'.
SPOC-PRTCTRL_START = ESCAPE_TRICK.
SPOC-PRTCTRL_START_LENGTH = 1.
SPOC-PRTCTRL_TOTAL_LENGTH = SPOC-PRTCTRL_START_LENGTH + 5.
ASSIGN SPOC-PRTCTRL_START(SPOC-PRTCTRL_START_LENGTH) TO <SPOC_PRTCTRL>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-FRAME_START = ESCAPE_TRICK.
SPOC-FRAME_START_LENGTH = 1.
ASSIGN SPOC-FRAME_START(SPOC-FRAME_START_LENGTH) TO <SPOC_FRAME>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-ICON_START = ESCAPE_TRICK.
SPOC-ICON_START+1 = ','.
SPOC-ICON_START_LENGTH = 2.
ASSIGN SPOC-ICON_START(SPOC-ICON_START_LENGTH) TO <SPOC_ICON>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-SYMBOL_LOW_START = ESCAPE_TRICK.
SPOC-SYMBOL_LOW_START+1 = '('.
SPOC-SYMBOL_HGH_START = ESCAPE_TRICK.
SPOC-SYMBOL_HGH_START+1 = ')'.
SPOC-SYMBOL_START_LENGTH = 2.
ASSIGN SPOC-SYMBOL_LOW_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_LOW>.
ASSIGN SPOC-SYMBOL_HGH_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_HGH>.
SPOC-FIRST_BYTES+0(1) = SPOC-PRTCTRL_START(1).
SPOC-FIRST_BYTES+1(1) = SPOC-FRAME_START(1).
SPOC-FIRST_BYTES+2(1) = SPOC-ICON_START(1).
SPOC-FIRST_BYTES+3(1) = SPOC-SYMBOL_LOW_START(1).
ENDFORM. -
Spool output more than 255 characters
Hi ,
i am running a ALV report in background whose output is more than 255 characters . but spool is showing only 255 charcters.
Do we have any setting to change to display all characters.
Or any OSS notes that can be applied.
Thanks & regards,
Sonika AhujaHi,
You need to change the Format Type through SPAD transaction. The Format Type decides the number of rows and columns per page. By creating a new format type as per your requirement would solve the probelm.
Also, in the Report declaration, change the Line-Size to 300 or as per the width of your output.
For further details pls. refer this thread :
Re: Spool List output display > 255 char when the rpt is run in Background
Best regards,
Prashant
Maybe you are looking for
-
MOVED: Re: MSI Forum HQ USB flashing tool!!!
This topic has been moved to BIOS. https://forum-en.msi.com/index.php?topic=167130.0
-
Adobe Muse CC will not install, Get Error "Exit Code: 7"
Need a fix to above problem fast. Workiing on a website for work. Using Windows 8 and uninstalled previous version. Thanks much!
-
Adobe Flash CS3 detected a problem and has to be closed.
Hello, I'm using Flash CS3 for a month, but the problem is that since a week ago, flash CS3 stops working after 5 minutes of use. So today I've downloaded the test version (30 days) in another PC, but even with this other computer the software doesn'
-
Cannot connect to DB from remote computer (ORA-12545)
Hello all, Please help, I am stumped. I am trying to connect to a database located at my work from at home. I am running into the following issue (see command and error below): ansichart@ansivm:~/src/perl$ sqlplus aspxdba/********@aspxp2 SQL*Plus: R
-
Can't close multiple open documents
I have Lion, and all the iWork updates. Try as I might I cannout seem to get Pages to STOP opening the last 10 documents I was working on. I have tried the System Preferences for Mission Control and rebooted and UNselecting "open with windows" or wha