{req} Tutorials for Dreamweaver CS6 and responsive web sites

Hello! I am Designer with zero knowledge of coding, but have been setting up many wordpress and phpBB sites based on tutorials.
I can design a website failry well with CS6 tools. But cant get the hang of making 'responsive' websites. (I know that I should learn a bit of coding, but, honestly, it just doesnt get into my head unless I take structured classes.)
Can anyone point me to a simple step by step guide to crafting a responsive layout? Preferably written (not video).
(By the way: Love the new Adobe website look.)

Building modern web sites without a fundamental knowledge of code is like trying to drive a car blindfolded. You may reach your destination but you'll break things (many things) along the way.
CS6 Fluid Grid Layouts require a working knowledge of HTML, CSS & Media Queries because you will need to manually tweak the code. Fluid Grids are a quick start; not a quick solution.
CSS Media Queries
http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
Responsive Web Design
http://coding.smashingmagazine.com/2011/01/12/guidelines-for-responsive-web-design/
Device Agnostic Approach
http://coding.smashingmagazine.com/2012/03/22/device-agnostic-approach-to-responsive-web-d esign/
Good luck,
Nancy O.

Similar Messages

Where can I find a tutorial for Dreamweaver CS6?

Where can I find a tutorial for Dreamweaver CS6?

First web site in DW CS6 - (5-part written tutorial with sample files)
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1_cs6.html
Nancy O.

Looking for a simple tutorial to building my first responsive web site in Dreamweaver CC.

I am looking for a simple tutorial to building my first responsive web site in Dreamweaver CC.
I have watched the tv.adobe video 3 times and I cam not able to do the actions the author shows.
help.
Ken Edwards

Responsive and simple don't go hand-in-hand. First do some prep-work to understand the concepts.
Responsive Web Design
http://coding.smashingmagazine.com/2011/01/12/guidelines-for-responsive-web-design/
Introduction to CSS Media Queries
http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
Jump start your RWD projects with any of the Responsive Frameworks below:
Foundation Zurb
http://foundation.zurb.com/templates.php
Skeleton Boilerplate
http://www.getskeleton.com/
Initializr (HTML5 Boilerplate, Responsive or Bootstrap)
http://www.initializr.com/
DMX Zone's Bootstrap FREE extension for DW
http://www.dmxzone.com/go/21759/dmxzone-bootstrap/
Project Seven's Page Packs (Commercial CSS Templates)
http://www.projectseven.com/products/templates/index.htm
Have fun!!
Nancy O.

Need details on how to move existing website to Dreamweaver CS6 and to Business Catalyst web hosting

Hi All,
     I need assistance with transferring an existing website - imagessays.com - (designed with Dreamweaver CS4) to my Creative Cloud CS6 account - and to web hosting by CS6 Business Catalyst.
   … step-by-step instructions would be most useful. I've got the Dreamweaver CS6 onDemand book, etc., ... I guess I’m just not enough of a geek to work my way through the steps and to get my site back moving ahead online.
    Beyond that, need advice as to how to repair a couple of non-funcitonal links on the site (check out imagessays.com to see a couple of pics that don't work). I'm looking forward to uploading more content and to do major upgrade to the site, but am unable to do so ... need technical support re how to do these simple (should be) things.
    Since setting up the website over 5 years ago, I have migrated from Dreamweaver CS3 to CS4 .... and now to CS6 ... and from a Dell XPS 450 running Windows XP to a Mac Pro desktop running Mac OS X.
These changes of version / machine / OS have separated me from the ability to do the one simple thing that I need to do with this straightforward website, that is: upload new pitchers and writins .
I look forward to assistance and support for this.
Thanks,
Jim

Hi Jim,
These videos might help:
Dreamweaver
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-dreamweaver-cs6-what-is-business-catalyst
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-dreamweaver-cs6-creating-and-publishing-sites
I'd open a local copy of the site in Dreamweaver CS6 and use the steps described in the video
Also, we have Dreamweaver and Business Catalyst (host) specific forums too. They should be able to help with specifics if you get stuck.
http://forums.adobe.com/community/dreamweaver
http://forums.adobe.com/community/business_catalyst
Hope that helps,
-Dave

Dreamweaver cs6 and Fluid Grid Layouts!

New to Dreamweaver cs6 and Fluid Grid Layouts!
Could you please tell me if you can create several layout grid designs (in the same website) depending on the page layout you need for each
page?
The reason I am asking is my web site has different information on each page (which is laid out differently)
Maybe create layout.css and layout2.css and so on. AND TIE EACH PAGE IN WITH A PHP INCLUDE NAVIGATION PLACED ON EACH PAGE.
Is this possible.
Thanks, Mrs. White

Different layouts for different pages? It's certainly possible, but I don't recommend it. Ideally you want to work with ONE FluidGrid Layout throughout your site with some additional CSS rules for optional regions (classes & styles) that may not be required on all pages. Some examples of optional regions would be contact forms, tables, definition lists, re-usable floats, etc...
If your Responsive Design is well planned, you shouldn't need more than one main structure for mobile, one for tablet and one for desktops. If you go down the path of having different structures for 3 devices AND each site page, you will soon be wrestling with a 10,000 lb. gorilla: Herculean to build and not much fun to maintain.
Server-side includes for site wide headers, footers & navigation are a very good idea whether your site is Responsive or not. I use them all the time.
Nancy O.

Placing an Image in Dreamweaver CS6 and Mavericks

To place an image in a web page, I have always been able to drag the file (say jpeg) from the Macintosh Finder and drop it into the web page. I'm using Dreamweaver CS6 and it worked fine with Lion, but stopped working with Mavericks. Can anyone tell me how to turn this capability back on?

No image is placed. Nothing blows up. And I can't find a preference setting to turn this on. It's a mystery to me why this is happening.
I write software for the Mac (WildTools) so I'm pretty good at debugging things, but this has be stumped.

FTP Broken in Dreamweaver CS6 and CC

I have been unable to ftp into 1 of 3 websites that I maintain ever since upgrading to Dreamweaver CS6 (and now CC). The problem appears to be that the site's root directory name as reported by a PWD command is shorter than the name required to be issued by the CWD command after logging into the FTP server. CS5.5 logs into the website's FTP server without any trouble and the script looks like this:
< 220 Service Ready for new User
> USER .myusername
< 331 Password Needed for Login
> PASS
< 230 User HUBING Logged in Successfully
> PWD
< 257 "/EH05/users/hubing" is Current Directory
> PWD
< 257 "/EH05/users/hubing" is Current Directory
> CWD //gs16/gs16/share/web/cvel
< 250 Directory successfully changed to "/gs16/SHARE/web/cvel"
> PWD
< 257 "/gs16/SHARE/web/cvel" is Current Directory
> CWD /gs16/SHARE/web/cvel
< 250 Directory successfully changed to "/gs16/SHARE/web/cvel"
> PASV
< 227 Entering Passive Mode (130,127,239,114,143,84)
> TYPE A
< 200 TYPE Command OK A
> LIST
Dreamweaver CS6 and Dreamweaver CC start out correctly, then suddenly issue a QUIT command:
< 220 Service Ready for new User
> USER myusername
< 331 Password Needed for Login
> PASS
< 230 User HUBING Logged in Successfully
> PWD
< 257 "/EH05/users/hubing" is Current Directory
> CWD /EH05/users/hubing
< 250 Directory successfully changed to "/EH05/users/hubing"
> CWD //gs16/gs16/share/web/cvel
< 250 Directory successfully changed to "/gs16/SHARE/web/cvel"
> PWD
< 257 "/gs16/SHARE/web/cvel" is Current Directory
> QUIT
< 221 Closing Session
Any suggestions?

Bhawna,
Yes. I can establish a connection without defining the site root folder. The directory that I login to by default is /EH05/users/hubing. One of the other sites that I maintain is in a subdirectory of that folder and Dreamweaver CC connects to that site without any problem. It just isn't able to switch to //gs16/gs16/share/web/cvel. Dreamweaver CS5.5 and WSFTP don't seem to have any problem with this.
Unfortunately, I can't send you the .ste file, because the password can't be shared. I appreciate your help though!

Need Tutorials for Dreamweaver 8

Hello,
I have the book for Dreamweaver 8, and i needed the cd rom
for the tutorials so i can follow the book examples. Is there
anyone who could help me out or point me in the right direction.
Thank you.
Santiago

1 - Contact the publisher to see if they will sell a
replacement CD
2 - Go to the publisher's web site to see if they have
download files
3 - Go to Amazon and buy a used book, WITH the CD - be sure
you read the FULL description at the seller, so you don't get
another book with no CD
http://www.amazon.com/gp/offer-listing/0321336259/ref=dp_olp_2/103-5379521-7827000?ie=UTF8 &qid=1203523931&sr=8-1

Adobe TV helps tutorials for Photoshop CS6

When trying to view Adobe TV help tutorials for Photoshop CS6 all I see is a black screen/box where the video should be. I am running XP, with maximum memory, IE 8, and the latest Flash player. I have also run through all of the check points noted in the following link:
http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_Flash_Player_ information
Any help?

What is your display adapter, device driver version & date? See http://forums.adobe.com/thread/945765

Use Sign.xml and Encrypt.xml for both request AND response within WSDL?

Hi,
ALSB: 2.6
I was wandering if it's possible to use abstract outof the box WS-Policy file within WSDL file to specify encryption
(Encrypt.xml) and digital signature(Sign.xml) with X509 for both request and response???
So far, it only works for either request or response BUT not both. i.e. within WSDL file
.....
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                           
                         <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
           Or

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                                   
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
But not both

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                                    
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                                   
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
...      Instead, I got error message like
<15/01/2008 10:15:04 AM NZDT> <Error> <ALSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: Fault
, message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fdb, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: Message]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode>
<faultstring>Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3</faultstring></soapenv:Fa
ult></soapenv:Body></soapenv:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#
X509v3
at weblogic.xml.crypto.wss.SecurityBuilderImpl.addEncryption(SecurityBuilderImpl.java:308)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processConfidentiality(SecurityPolicyDriver.java:280)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:75)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:86)
Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <com.bea.weblogic.kernel> <000000> <Failed to build CertPath
java.security.cert.CertPathBuilderException: [Security:090603]The certificate chain is invalid because it could not be completed. The trusted CAs did not inclu
de CN=x509,OU=x509,O=x509,L=Wellington,ST=Wellington,C=NZ.
at weblogic.security.providers.pk.WebLogicCertPathProviderRuntimeImpl$JDKCertPathBuilder.engineBuild(WebLogicCertPathProviderRuntimeImpl.java:669)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:194)
at com.bea.common.security.internal.legacy.service.CertPathBuilderImpl$CertPathBuilderProviderImpl.build(CertPathBuilderImpl.java:67)
at com.bea.common.security.internal.service.CertPathBuilderServiceImpl.build(CertPathBuilderServiceImpl.java:86)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
        Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <ALSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault,
message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fd8, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: null]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault xmlns:wsse="http://docs.oasis-open.or
g/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurityToken</faultcode><faultstring>Security token failed to validate. weblo
gic.xml.crypto.wss.SecurityTokenValidateResult@3c5347b[status: false][msg [
Version: V1
Subject: CN=x509, OU=x509, O=x509, L=Wellington, ST=Wellington, C=NZ
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 13052787793731294943682394984664645854838424340012907077330623....
The 'System Error Handler' from 'Invocation Trace' in ALSB test console is something like
[pre]
$fault:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
     <con:errorCode>BEA-386201</con:errorCode>
     <con:reason>
          A web service security fault
          occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Failed
          to get token for tokenType:
          http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3]
     </con:reason>
     <con:details>
          <err:WebServiceSecurityFault
               xmlns:err="http://www.bea.com/wli/sb/errors">
               <err:faultcode
                    xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
                    soapenv:Server
               </err:faultcode>
               <err:faultstring>
                    Failed to get token for tokenType:
                    http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
               </err:faultstring>
          </err:WebServiceSecurityFault>
     </con:details>
     <con:location>
          <con:path>response-pipeline</con:path>
     </con:location>
</con:fault>
So is this a feature not supported in ALSB 2.6 yet or am I missing something dead simple?
Thanks in advance
Sam

Instead of specifying policies for input and output separately you could place the policy reference only once in the operation element. Maybe will this solve your problem...
http://e-docs.bea.com/alsb/docs26/security/ws_policy.html#wp1061166

How do I get ColdFusion 10 extensions for Dreamweaver CS6?

I can't find the ColdFusion 10 tags extension for Dreamweaver CS6 on Adobe's update website. I replaced my computer and would like to install them on my new computer. Do they still exist? If so, where do I go to download them?
Thanks for your help.

DW has dropped support for CF.
But see if this discussion helps.
Dreamweaver CC Coldfusion 10 extension?
Nancy O.

Installation issues including AAM, Dreamweaver CS6 and Phtoshop CS6

Hi Everyone,
This discussion is a continuation of a thread that was started in the 'Creative Cloud' discussion forum. It's important to read this discussion first to get a background regarding the underlying issues first.
To continue, this new discussion will keep the issue in the open - I don't want it hidden away as I believe others may benefit from suggestions and issues along the way.
Quick recap:
My UK organisation purchased 6 licences each of Photoshop CS6, Dreamweaver CS6 and Acrobat 10 via an Adobe License Certificate.
The license keys were given to me to download and install the software.
I downloaded from http://www.adobe.com/downloads but on installing was told that the key was invalid.
Contacted Adobe support several times and finally found that the software had to be downloaded from https://licensing.adobe.com.
Didn't have an account as these are held by my organisation's purchasing team.
Adobe added my details to my company's account eventually.
Downloaded and installed the software.
At fisrt I used the software and, as with most software rushed through for a deadline, discovered various bugs (mainly in Dreamweaver it has to be said, as I haven't really had chance to use the other two products yet). So...
Attempted the automatic update process. This failed due to restrictions on our firewall.
Checked the Adobe site which said check the log files. Checked the log files and found a warning (this is detailed in the other post metnioned above).
Chatted with Adobe support twice at this point to try and pinpoint the issues. They suggested downloading the updated updater(!).
Dreamweaver update process went 65% of the way through before freezing with 5 seconds left on the clock and Photoshop failed altogther saying that the updater was invalid. Dreamweaver gave me the error number U44M2I218, as discussed in the other thread by Ken.
I completely uninstalled every Adobe product, including Flash and Air
and ran the Cleaner Tool.After reinstalling and attempting the upgrade process for only Photoshop and Dreamweaver I received the same issues as discussed previously.
For some reason this caused issues with my OS and I've had to rebuild. This time I'm running Windows 7 instead of XP SP3, but these products are not getting installed until someone from Adobe
can give me clear direction as to what I need to do.
To bring this up to date I received a PM this morning from Jeff Wright. The message reads:
To: mandelbrot
From: Jeff A Wright
Sent: 23-Oct-2012
Subject: Private Message: Regarding your updating difficulties
Good day Paul Weston,
I am contacting you regarding the difficulties you have been having applying the Dreamweaver 12.0.2 update. If you have contacted our support team if you can please provide me with the case number it will allow me to review your interaction. In addition if you can please let me know your preferred e-mail address we can bring this conversation into e-mail as opposed to sending private messages back and forth. This will be especially important when we need to look at your installation logs for the update which you are having difficulty applying.
Thank you,
Jeff Wright
My reply:
Hi Jeff,
Unfortunately I don't have any case number(s) even though I spoke to several of your colleagues in India, bit via chat and telephone. Each time no case number was given to me. At one point I did fill out a survey, also!
If you can trace it from this, my email address is <<emailadress>>, I'm linked to <<organisation>>NHS Trust and our primary contact used to be a gentleman called Eddie Drake (either <<emailaddress>> or <<emailaddress>>). Failing that, our software license certificate number is <<id>>, end user id (whatever that is) is <<id>> and our Adobe order number for this consignment is <<id>>.
I don't want to hide this away from the community and have opened a new discussion to this end - any PMs or emails will be dropped into this unless you choose to use the discussion as a contact method.
Paul.
Please feel free to add constructive comments anyone.
Regards,
Paul.

Sorry but that's not working for me - I clicked the link that you specified and got this page:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
With this text on it:
Adobe Application Manager
Adobe Application Manager Installer
This patch will install the Adobe Application Manager that is included with Adobe Creative Suite 6, Adobe Creative Suite 5.5 products. It is only necessary to run this patch if you are receiving one of the following error messages:
Adobe Application Manager is needed to update your product.
Adobe Application Manager is needed to start your trial.
For additional information on this issue, see, “Error, "Adobe Application Manager is needed..." when launching or using Adobe Creative Suite 6, Creative Suite 5 products” (cpsid_84344.)
File Information
Product
Adobe Application Manager
Version
CS6
Platform
Windows
File Name
ApplicationManager6.2_all.exe
File Size
50.9MB
Proceed to Download

Is cartweaver available for dreamweaver cs6

I have been trying to find Cartweaver within Adobe Extensions for Dreamweaver CS6, but although I've just downloaded all updates, it doesn't appear in the list. Is it no longer available? I can see PHP shopping cart, but has this replaced Cartweaver?
Thanks.

Hi Linda,
Yes please do pop over to the Cartweaver user forums. Handling detailed information would be more appropriate there.
Briefly, there has been an update since the Lynda.com course was done - just a small on to make things easier. After installing Cartweaver into your site and once you have created a new blank database, and set you data connection, just brows to your admin. The first time you do this you will be presented with the create database page - click the button and all the Cartweaver tables and data will be added to your database.
For any more details feel free to ask on the CW user forums or email me or support,
Hope this was helpful. Thanks!
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
PHP & ColdFusion Shopping Cart for Adobe Dreamweaver
Stay updated:
http://www.facebook.com/cartweaver
http://www.twitter.com/cartweaver
http://blog.cartweaver.com

Code works with Dreamweaver CS6 and not with CC

<p><a href="javascript:void(0)" onclick="window.open('http://www.anything.comt', '', 'top=20,left=20,toolbar=0,statusbar=1,scrollbars=1,resizable=1')" title="title">name</a></p> works with Dreamweaver CS6 and not with CC
[Edited Title and moved to Dreamweaver- JTS]

I'm not quite sure I understand your point.
I have just tested the Open Browser Window behavior in Dreamweaver CC. It creates slightly different code from Dreamweaver CS6, but it works correctly. This is what is created in the HTML:
<p>my <a href="#" onClick="MM_openBrWindow('http://www.adobe.com/','mywindow','toolbar=yes,location=yes,status=yes,menubar=yes,scrollb ars=yes,resizable=yes')">link</a>
</p>
Dreamweaver CC also adds the following code to the <head> of the page:
<script type="text/javascript">
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
</script>
The definition of the MM_openBrWindow() function is needed in the <head> for the code to work. But it definitely works OK.
With regard to _self and _blank not working, I can't find any problem with the way Dreamweaver CC handles them.
However, if you feel happier working with Dreamweaver CS6, you can download it from the following page:
https://creative.adobe.com/products/dreamweaver
Open the drop-down menu under "In this version", and select Dreamweaver CS6 as shown in the following screenshot:
With Dreamweaver CS6 selected, click the large Download button at the top-right of the page. You can then download CS6, and install it alongside Dreamweaver CC.

Dreamweaver CS6 and Jquery Mobile 1.4.1

I updated all the Jquery files in Dreamweaver CS6 and now in Live View the Jquery styling doesn't show, works fine when I open the page with Chrome. Any help ?
http://i62.tinypic.com/wtgitv.jpg

Tried with Jquery Mobile 1.4.0 and it works, so I guess I'll use that for the time being.

{req} Tutorials for Dreamweaver CS6 and responsive web sites

Similar Messages

Maybe you are looking for