Router IP address not found

when I enter my router IP address into terminal I get:
host 192.168.X.X
Host X.X.168.192.in-addr.arpa. not found: 3(NXDOMAIN)
On entering this I get
$ hostname
XXXXX-Mac-Pro-XXXXX.local
But when I try to locate host on local I get same error message as IP address
$ host XXXXX-Mac-Pro-XXXXX.local
Host XXXXX-Mac-Pro-XXXXX.local not found: 3(NXDOMAIN)
I'm not sure what is gong on or why, can anyone shed some light on this?

Your DNS server does not have a name for your router's IP address.
You DNS server does not have a name for XXXXX-Mac-Pro-XXXXX.local
You can use ping XXXXX-Mac-Pro-XXXXX.local to get the IP address.  You can use other utilities to get the IP addresses of devices on your network, such as Bonjour Browser or WakeOnLan

Similar Messages

  • Firefox suddenly can't connect to the Internet (Address Not Found)

    OK, so I recently bought a netbook (Asus eeePC) and put Arch on it to dual-boot. I took it with me on a business trip last week, and I was so impressed with Arch I decided to put it on my desktop today (I had used Arch before, but not for a long time). So, as I was chugging along, I pulled up Firefox on my netbook (it's handy to have a secondary computer while installing Linux), and it gave me an "Address Not Found" error when pulling up Google. Firefox had been working just fine (wired or wireless Internet) for all of last week, and I haven't changed anything.
    What's extremely strange is that everything else works. I could pull up Google in Lynx, and I was listening to an Internet radio station (Groove Salad) using cmus, and it worked just fine. Figuring it was just a fluke, I kept going and discovered that I had the same problem on the Desktop once I got around to gettting Xorg and Fluxbox working and after I installed Firefox. It's very strange - the computers are quite different (the netbook is running i686, and the desktop is running x86_64). I have a home file/web server running Gentoo, and I'm able to run Firefox on it using ssh/X-Forwarding, and it works just fine. I can also pull up my server on Firefox on both the Laptop and the Desktop (just on the LAN, not the Internet). I also tried installing SeaMonkey on the netbook just to see, and I got the same results - it can't access Google or anything. Both computers are dual-booting Windows XP and Arch, and Firefox works on Windows for both computers.
    This might be the strangest error I've ever run into on Linux - I'm not sure what to do next to diagnose the issue. I'll gladly post any information anyone thinks is relevant. Any ideas?

    It's definitely a DNS issue. I tried as Statix suggested above and it worked after a little tweaking. I went back and checked my modem, and it listed two DNS servers. I put those in resolv.conf manually and they worked too. My router or modem (192.168.0.1 and 192.168.1.254 respectively) should each be able to handle DNS on their own, but for some reason they aren't. I know it works; Windows XP and Gentoo both set their nameservers to 192.168.0.1 and 192.168.1.254 using DHCP and have no issues. When I tried DHCP on Arch, these were the relevant sections of rc.conf:
    eth0="dhcp"
    INTERFACES=(eth0)
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    I tried using ROUTES=(gateway) as well (no effect). When I did that, DHCP automatically set my resolv.conf to:
    # Generated by dhcpcd
    # /etc/resolv.conf.head can replace this line
    nameserver 192.168.1.254
    nameserver 192.168.0.1
    # /etc/resolv.conf.tail can replace this line
    So changing the eth0 line in rc.conf to:
    eth0="eth0 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255"
    And putting the nameservers in resolv.conf from the values my modem listed works, but it shouldn't be necessary. I'd rather have it send DNS requests to the router or modem like my other systems work, but at least I have a workaround for the time being. My time is a bit limited, but I'll keep looking into it when I have the chance and post whatever I find. If anyone has any other ideas, I'd appreciate it though. Thanks!

  • Error in SRM 7.01,Trace showing Partner Ship-To Address not found in FEH.

    Hi Gurus,
    Please throw some light on my isssue.
    We are developing Plan Driven Procurement Business Scenario in SRM.
    Current System details are ECC 6.0 EHP4, PI 7.1 & SRM 7.01.
    We have done all the configuration settings in ECC, PI & SRM.
    PR created in ECC 6.0 and External source of Supply tab generated in PR, processed through SAP PI successfully to SRM 7.01. In SRM it showing an error trace as *Partner Ship-To address not found* . We are using ABAP Proxies and standard content for this PDP Scenario.Using PurchaseRequestERPSourcingRequest_Out as an outbound interface and PurchaseRequestERPSourcingRequest_In as Inbound interface. shopping cart is not getting created in SRM system. FEH is enabled in SRM system to trace the error.
    Please provide inputs to resolve the issue.
    Ashok

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Address not found but IE works

    I have login to on secure website sucessfully but when I click on an option to display some statistic, I get the error message "Address not found".
    I notice that there is an additional \\ added to the URL. Removing them is ok. Is there any setting to prevent firefox inserting the additional \?
    Below is the URL I get when I click on the view statistic
    http://\\203.116.218.20\mrtg2/61.8.240.47/61.8.240.47_172.24.29.201.html
    I will need to remove the // after http: then it will display.
    System configuration: Window XP Sp2, Bit defender internet security 2010, intel pentium 1.7GHz, 1 GB RAM, firefox v3.0.1
    Have checked my bitdefender setting everything is allow for my firefox.
    I do notice 1 thing, for IE, when I click on the statistic button, another window will open. I am not too sure if it makes a difference between opening tab and window.
    Waiting for your reply

    Reload the webpage while bypassing the cache using '''one''' of the following steps:
    *Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
    OR
    *Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    Let us know if this solves the issues you are having.

  • PARTNER SHIP_TO ADDRESS NOT FOUND problem in PDP---Please help

    Hi all,
    We are using the plan driven procurement to push our requirements using the RFC user.
    When running the prgm "BBP_EXTREQ_TRANSFER" to transfer the PR to SRM it shows item transferred, but its getting stuck in the ques in 'SMQ1' transaction with a log saying
    PARTNER SHIP_TO ADDRESS NOT FOUND.
    Is there any need to maintain any other attributes for PDP user or RFC user in ECC or SRM,
    please let me know.
    I am waiting for the reply,
    If you have any solution then please reply to this thread.
    Regards
    Santosh F.

    Hi
    Check this note is applicable for you or not
    1101215 - External Requirements: Error transfering the hierarchy
    items
    Note Language: English Version: 2 Validity: Valid from 10.10.2007
    Summary
    Symptom
    When transferring the purchase requisitions with hierarchy items, the ship
    to address is not mapped properly. You get the error "No address found for
    partner function type Ship-To Address". The purchase requisition gets stuck
    in the outbound queue of backend
    More Terms
    BBP_EXTREQ_TRANSFER MAPV_PARTNER_FROM_EXT
    Cause and Prerequisites
    This is due to program error
    Solution
    Please implement the attached correction instructions or import the
    corresponding support package.
    Valid Releases
    Software Component Release From
    Release
    To Release and Following
    SRM_SERVER 550 550 550
    Support Packages
    Support Packages Release Package Name
    SRM_SERVER 550 SAPKIBKT12
    muthu

  • Internal error: Recipient address not found.return code : 80

    Hi All,
    I am getting this this error in sost tcode.I am facing this tcode for the first time and hence have no idea.could any one suggest why this is coming and could be the solution for this ?
    Status      trans.met sender recipient send date send time  status text
    Red mark  via. inter.  john      -           27.08.08   15:45:00  internal error: Recipient address not  found.return   code : 80
    Need solution urgently.

    Not in SCOT, If you read carefully i said,
    setup the Relay Agent in your SMTP server
    For example if you use MS Exchange you need to do the config there... If you ask your Mail Admin he will know what you're talking about.
    Regards
    Juan

  • IP address not found? Ipad/macbook air webdav & airport express

    I finally got my macbook air set up to use the webDAV with my iPad3.  For the longest time it was erroring, and not working, but now I finally got it to actually try connecting, but it says the server is not found.
    I have Airport Express as my router which is assigning my computer an IP address as "xx.x.x.xx"  I'm not sure if this format is the problem, or if there is something else I need to adjust on the macbook air to allow it to be found, or if I missed something in the webDAV set up that would cause this issue.
    I have been working on this all day, so this is officially driving me nuts.  If anyone can help, I'd greatly appreciate it.
    Thanks,
    Cher

    padlock symbol means that you need to either input your network password or you need to input your computer admin password.... whichever is applicable to the current situation.
    If you bring down the airport menu item and click on Join Other Network, do you get a blank for network and password. Fill those in and see what happens. You did create a wifi network name?
    Did you setup a wireless network? If not, then that would have to be one step in your procedure.
    Message was edited by: Rhyd

  • END point URL for ESB Routing service says NOT FOUND

    Hi All,
    For the routing services in ESB, The link of WSDL is opening up fine, but the link of endpoint URI for the routing service is failing with the message below message. When i invoke the WSDL using SOAP UI, i get back the the same error message. I tried bouncing the server , but of no help. I also notice that slide directory ESB_Projects gives 404 error on any browser.
    So when i click below url for any of the routing service
    http://<hostname>:<port>/event/<systemName>/<serviceGroupName>/AddressStandardizeRS
    I get below error in browser-
    Not Found
    The requested URL /event/<System Name>/<Service Group Name>/<Routing Service Name> was not found on this server.
    Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777

    Check if the port of ESB in your server is open.
    I think that the port is: 7777
    try from ESB server:
    wget WSDLURI
    if you got the file then the port is closed.

  • New distribution groups results in Undeliverable "recipients address not found in recipients email system"

    For some reason, new distribution groups I have created result in Undeliverable with the following body, Other distribution groups created in the past work fine. I have tested this outside our organization using my gmail and it gets returned to my gmail
    account as well. Users that belong to the group are chosen obviously from the exchange provided users. I have tried using OWA, deleting autoentry, using the full address of the distribution group, I am truly at a loss. Any help is appreciated thanks in advance! 
    -Steve
    Delivery has failed to these recipients or distribution lists:
    [email protected]
    The recipient's e-mail address was not found in the recipient's e-mail system. Microsoft Exchange will not try to redeliver this message for you. Please check the e-mail address and try resending this message, or provide the following diagnostic text to your
    system administrator.
    Sent by Microsoft Exchange Server 2007
    Diagnostic information for administrators:
    Generating server: akmail.mydomain.COM
    [email protected]
    #550 5.1.1 RESOLVER.ADR.RecipNotFound; not found ##
    Original message headers:
    Received: from akmail.mydomain.COM ([::1]) by
     AKMAIL.mydomain.COM ([::1]) with mapi; Tue, 8 Jul 2014 12:43:48 -0400
    Content-Type: application/ms-tnef; name="winmail.dat"
    Content-Transfer-Encoding: binary
    From: Steven Anderson <[email protected]>
    To: "[email protected]" <[email protected]>
    Date: Tue, 8 Jul 2014 12:43:47 -0400
    Subject: test2
    Thread-Topic: test2
    Thread-Index: AQHPmsvJDOvU9vGSLkK1oPeNzIzatw==
    Message-ID: <[email protected]>
    Accept-Language: en-US
    Content-Language: en-US
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator: <[email protected]>
    MIME-Version: 1.0

    Thank you very much for your response Akshay, here is the results from the Get-DistributionGroup:
    Name                DisplayName         GroupType           P
    techsupport         techsupport         Universal           t
    info                info                Universal          
    i
    *CallOut            *CallOut            Universal           _
    AKwirelessorder     AKwirelessorder     Universal           A
    *AllEmployees       *AllEmployees       Universal, Secur... _
    casstb              casstb              Universal           c
    albanytsg           albanytsg           Universal           a
    ak911kyalarms       ak911kyalarms       Universal           a
    Polk                Polk                Universal          
    P
    Solatb              Solatb              Universal           S
    kytechs             kytechs             Universal           k
    AKDISTSolacom       AKDISTSolacom       Universal           A
    NEFla               NEFla               Universal           N
    RhodeIsland         RhodeIsland         Universal           R
    NewYork             NewYork             Universal           N
    bradsgroup          bradsgroup          Universal           b
    petesgroup          petesgroup          Universal           p
    mikesgroup          mikesgroup          Universal           m
    test2               test2               Universal, Secur... t
    So it does list it, I have 2 domain controllers at the same site one is also hosting the exchange server (we are a small business). I created the distribution group directly on the exchange management console. I will force AD replication, but I have looked
    at the structure using ADSIedit and it does list it in the users section which is sort of why I am at a loss on this.  Thanks very much for your help, -Steve

  • ASA 5525, v9.1.2 - IPAA: Error freeing address ip-address, not found

    Hello everybody!
    The following problem:
    VPN-dial-in on the ASA .
    There are different VPN group policies , each with its own DHCP pool .
    Authentication is performed by the AAA AD .
    Everything works properly.
    However, 3 users of a VPN group can not dial in . On the firewall then this error always comes in the log :
    IPAA : Error freeing address 172.24.16.41 , not found
    That address is nowhere else on the firewall , but was once assigned to a user . But this Network Object is deleted now.
    The DHCP pool for this VPN Group goes from .33 to .63 .
    I don not understand why the ASA always wants to take the .41 However, even if no one else is logged in via VPN .
    No matter which one of the 3 users I take, the ASA always wants to assign the .41 .
    For all the other users that are having no problem, it assumes a different IP from the pool.
    I recreated the pool, created another pool and assigned that pool, I rebootet the ASA. No luck.
    Also did a "clear arp".
    No improvement .
    Ideas ?
    As I said, all other VPN groups and users have no problems.
    ASA 5525 , v9.1.2
    Thank You!

    Problem solved.
    The User is only allowed to be in one of the VPN-Groups in the ActiceDirectory.
    Those 2 problem-users where in two VPN-groups.
    So, problem fixed.

  • Partner & Addresses not found for partner fxn Requester & Ship-To-Party

    Hi Gurus,
    We are in SRM 4.0
    A purchaser is getting the following error message while trying to convert a approved SC to PO
    Warning: No address data found
    Error: No Addresses found for partner function type Requester
    Error: Partner not found with partner function type Requester
    Error: No Addresses found for partner function type Ship-To-Party
    Error: Partner not found with partner function type Ship-To-Party
    I've checked the Requester using BBP_CHECK_USERS to find that the user is consistent.
    Any idea what might be causing this issue?
    Kind regards,
    MGS

    Thanks for that. Following the tutorial very closely. we are trying to setup 3040 850. We have many successful 4010 850.
    Still we continue to get same error. I have setup the new Business Action supporting 3040 standard, and believe all of my settings are correct according to tutorial and help files.
    Am I looking at at bug?
    Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "CUSTOMER", To party[NAME] "US", Business action name "null";

  • Connection problems after installing wireless router: frequent "Server not found"

    I recently got a Linksys wireless router but since then, a lot of webpages show "server not found" frequently. I can eventually open these if I keep refreshing the page or come back to it later. This only happens to my desktop PC connected by a cable but never happens to our 3 laptops with wireless connection. The LAN cable changed but problem persists. Desktop PC swapped but problem still persists. Is this simply a defective router?

    What is the model no of the router...?
    Try changing the MTU size to 1350 on the router and power cycle the router and check..

  • Wireless printer IP address not found online

    I have an HP 4630 all in one printer installed wirelessly.  It has been working fine for 3 months.  As of 4 days ago I could print wirelessly from all my computers no problem.  Now I can't.  After over an hour of troubleshooting - unplugging everything, disconnecting then reconnecting to my network, etc. I'm still having the same problem.  The last thing I tried was typing my printer's IP address into the internet web browser.  I get an "oops, can't find it" message.  Can anyone help me with this?  I have not made any changes to anything - it all of a sudden doesn't work.  Weird...Thanks in advance!
    This question was solved.
    View Solution.

    Rebooting the router and unplugging everything and then starting it all backup again worked!  Thank you for suggesting that. When reading the troubleshooting document you attached it doesn't lead you to addressing the router if the printer is staying connected to the network - at least that's how I read the troubleshooting instructions.  So thank you for not giving up with me.  I had unplugged my modem but not my router in my initial troubleshooting.  I also unplugged my router before I read your additional instructions but that didn't work.  For some reason you have to unplug everything and start it back up in the just the right order.  technology...anyway, thank you so very much!!!

  • Can't open "People" due to error message saying email address not found

    Unable to access addresses saved in "People". I am able to open, but error message reads that email address cannot be found.

    I suppose you mean a webmail service, but it might help to know which one.

  • Hooking up wireless router -it is not found.Told to use a wired computer/only have laptops.

    Solved!
    Go to Solution.

    Your laptop has an ethernet port so connect it to port 1 on the router.  Go to 192.168.1.1 username blank, password 'admin' and configure your hour like everyone else.

Maybe you are looking for