SAP Plant Connectivity  2.1.0.55 on Windows 7 Enterprise 32bit problem

I tried to install SAP PCO version .1.0.55 on Windows 7 Enterprise/32bit, whenever i try to start
the agent, i get the following error in the Log:
=================================================
Server stack trace:
   bei System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   bei System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   bei System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
   bei System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   bei System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   bei System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   bei System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   bei SAP.Manufacturing.Connectivity.IPCoAgentControl.Start()
   bei SAP.Manufacturing.Connectivity.ConnectivityAgentProxy.Start()
   bei SAP.Manufacturing.Connectivity.WcfHost.Start()"
02.11.2011 13:04:37,.,9,3684,ya,Error,ServiceFaultManager,Generating Manufacturing Fault: REASON = General PCo Fault: [severity = Fatal] COM Exception
[Unable to decode an error code.]
02.11.2011 13:04:37,.,9,3684,ya,Error,OpcDaAgent,COM Exception [HRESULT = -2147024809] from LegacyOpcWrapper,"Unable to decode an error code.
   bei SAP.Manufacturing.Connectivity.Agents.Opc.DaServer.DecodeResult(Int32 errorCode)
   bei SAP.Manufacturing.Connectivity.Agents.Opc.OpcServer.CheckResult(Int32 hr)
   bei SAP.Manufacturing.Connectivity.Agents.Opc.DaServer.CreateGroup(String name, ValueType updateRate, ValueType timeBias, Single deadband, Boolean requiresAdvise)
   bei SAP.Manufacturing.Connectivity.Agents.Opc.Da.OpcDaAgent.CreateTagQueryGroup()
   bei SAP.Manufacturing.Connectivity.Agents.Opc.Da.OpcDaAgent.EstablishConnection()"
02.11.2011 13:04:04,.,1,2868,ya,Error,Host,failed to create ConnectivityAgentProxy,"General PCo Fault: [severity = Fatal] COM Exception
=======================================
Did anybody has the same Problem? Is this somehow cause by a .Net problem? (i do have 4 Client and 4 Extended installed)
Thank you very much in advance for helping me
best regards,
Thomas L.
Edited by: Thomas Lustig on Nov 3, 2011 12:48 PM
Edited by: Thomas Lustig on Nov 3, 2011 2:03 PM

Thomas,
Did you ever get an answer to this? I am facing the exact same problem.
Many Thanks,
Colm

Similar Messages

  • SAP Plant Connectivity SDK 2.1 for download

    u2009Hello. Excellent info.
    Please, we cant find SAP  Plant Connectivity SDK 2.1 for download. The note 1399331 - Plant Connectivity 2.1, says that we can download from:
    https://service.sap.com/swdc ->Downloads -> SAP Installations & Upgrades -> Entry by Application Group -> Composite Application -> SAP Manufacturing Integration and Intelligence -> Plant Connectivity SDK -> Plant Connectivity SDK 2.1 but this path is not correct.
    Please, can you help us?
    Thanks.
    Gustavo Barboza
    PROPILCO

    Gustavo,
    Yes it seems that the note is wrong. I will contact the author and let them know. To find it go to .../sdwc > Search All Categories > copy and paste "Plant Connectivity SDK 2.1" in the field > click the link for Installation product > click the download tab.
    That should do the trick
    Regards,
    Kevin

  • SAP Plant Connectivity Error

    Hi All,
    We are using Plant Connectivity 2.0.1.7 with SAP MII 12.1.4.
    we have configured two agents which are running automatically but agents got stopped whenever there is upgrade in MII and again we need to reconfigure agents.
    Please resolve this issue.
    Regards,
    Manoj Bilthare

    Hi, just to follow up on what Manoj has mentioned.  MII was always on 12.1, but patches were updated.  When this happened, we got errors that the PCo couldn't connect to the Destination (MII).  What happened, was the PCo Agent would start and work for a period, but then when it tried to re-connect (I think after the initial session timed out), it wasn't able to, saying invalid version of MII.  If we stopped and started the PCo, it would run for a time and then fall over again.
    We reconfigured the MII Destination (still just selected 12.1) and then deleted the PCo agents and re-configured them.  Now we're getting the error that there's an invalid date format - not too sure where it could pick that up other than from the OPC Server.  All the Agents are doing is monitoring one tag each.  If the tag value = 1, then the notification fires and calls the MII transaction.
    The OPC Source hasn't changed, all that's changed is we've patched MII.
    Has anyone else experienced this same sort of behaviour from the PCo 2.0?
    Edited by: Lawrence Prinsloo on Mar 15, 2010 4:44 PM
    Edited by: Lawrence Prinsloo on Mar 15, 2010 4:45 PM

  • X220 delayed connect to wifi network after boot: windows or intel problem?

    Good Morning to all of you! I'm searching for some advice for some problem which is troubling me lately. It's really not a big deal but it's bugging me: Every time I boot my x220 it will take 2-3 minutes to connect to my wifi network. I know it's not a big secret that all this lenovo tools installed are slowing down the computer and as a consequence the wifi software will be started with a delay but maybe someone of you knows a way or two to work around this? Maybe I can somehow prioritize the start of the wifi software?
    I appreciate every advice I can get.
    Using x230t (i5-3320M, 8GB RAM, 256GB SSD, 80GB mSata-SSD) and loving it!
    "I may not own the world but I own my mind and therefore the world is at my feets." (me)
    Solved!
    Go to Solution.

    in access connections tool tab> location  switching do you have this checked
    mine takes 1 -2 seconds
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Plant Connectivity - RFC Destination

    Hi,
    I configured Plant Connectivity 2.0 (V2.0.0.33) according to the following document:
    SAP Plant Connectivity 2.0 - Configuration Guide for EWM
    On the EWM side one have to create a TCP/IP connection. There is a brief instruction in the EWM help:
    Setting Up the Material Flow System > System Settings > 7.
    The RFC Client connection test succeeds. The Connection Test in the SCM/EWM system results in error.
    There are some ambiguous points in the configuration for me.
    PCo Management Console > Destination Systems > RFC Settings > Server Settings
    - Program ID
    Should the Program ID be the same as the  name of the TCP/IP Connection?
    - Gateway Service ?
    Here I took the sapgwxx which is listed in the error message.
    - Application Server ?
    What is meant by Application Server? It is the server where Plant Connectivity is installed? Or is it the SAP server?
    SCM > SM59
    The instruction in the MFS System Settings number 7 about the RFC destination doesnt specifies which settings to make here. Also the EWM-MFS-PCo guide doesnt give any detail about that. There is only a hint on page 15 that one can test the connection.
    I would appreciate any help! Thanks in advance!
    Kind Regards,
    Bahit A.
    Edited by: bahitaktas on Jun 8, 2010 2:04 PM

    I solved the problem!
    TCP/IP Settings:
    - Activation Type -> Registered Server Program
    - Registered Server Program > Program ID -> Program ID from PCo
    PCo Settings:
    PCo Management Console > Destination Systems > RFC Settings > Server Settings
    - Gateway Service ? Gateway listed in the error details if the TCP/IP connection in sm59 fails
    - Application Server ? Analogous the host listed in the error details ...
    http://help.sap.com/saphelp_nw70/helpdata/EN/22/042652488911d189490000e829fbbd/frameset.htm
    Edited by: bahitaktas on Jun 8, 2010 2:53 PM

  • Plant Connectivity Error failed to create ConnectivityAgentProxy

    Dear experts,
    I currently installed installed PCo on a XP Machine and after I change the network ID of the PC and the workgroup the agent instance is not able to start properly. I receive the following message:
    10.10.2011 22:28:32,.,6,1016,TEST_OPC,Error,Host,failed to create ConnectivityAgentProxy,"The server process could not be started because the configured identity is incorrect.  Check the username and password.
    Server stack trace:
       at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at SAP.Manufacturing.Connectivity.IPCoAgentControl.Start()
       at SAP.Manufacturing.Connectivity.ConnectivityAgentProxy.Start()
       at SAP.Manufacturing.Connectivity.WcfHost.Start()"
    10.10.2011 22:28:32,.,8,1016,TEST_OPC,Error,ServiceFaultManager,Manufacturing Fault: REASON = The server process could not be started because the configured identity is incorrect.  Check the username and password.
    As the other applications like OPC Scout are able to connect to the DCOM (at least this is my understanding) in order to query the OCP Server, it seems to me that there is a Plant Connectivity problem. I tried to find out where the settings ConnectivityAgentProxy are detailed - I thought something like an .ini, .xml file - but unfortunately I did not find anything. Do you have any suggestion, advice?
    Thanks in advance,
    Florin
    Before I start with installing image of the PC with the image before doing the network id name change i would like to ask you if there is any setting, configuration file

    Do you have a named user entered for the Agent Instance Service User name/password?  If so, you may have to delete and re-enter the name\password to reset this.  If you are using DCOM over a workgroup, the same workgroup user name/password must be set up on both the PCo server and the OPC Server PC's.
    Hope this helps.
    - Steve

  • Plant Connectivity Active Monitor Service

    Hi,
    I was wondering if somebody could tell me exactly what the Plant Connectivity's ActiveMonitor service is used for.  I tried to google and search the forums for ActiveMonitor and have not found anything useful.  I have also done some testing with enabling and disabling the service, and have yet to figure out exactly how it is utilized.
    Any help would be appreciated.
    Thanks,
    Justin

    I solved the problem!
    TCP/IP Settings:
    - Activation Type -> Registered Server Program
    - Registered Server Program > Program ID -> Program ID from PCo
    PCo Settings:
    PCo Management Console > Destination Systems > RFC Settings > Server Settings
    - Gateway Service ? Gateway listed in the error details if the TCP/IP connection in sm59 fails
    - Application Server ? Analogous the host listed in the error details ...
    http://help.sap.com/saphelp_nw70/helpdata/EN/22/042652488911d189490000e829fbbd/frameset.htm
    Edited by: bahitaktas on Jun 8, 2010 2:53 PM

  • Plant Connectivity

    Hi,
    Is there some detailled information available for Plant Connectivity? (both functional and technical)
    I have found this so far, but it does not give enough information:
    http://help.sap.com/saphelp_pco20/helpdata/EN/46/a00344d44852b7e10000000a155369/frameset.htm
    kind regards,
    Michel

    Here are some additional notes:
    The u201CSAP ME PCo Extensionsu201D have now been made available to customers and partners via SAP Developer Network (SDN). Included with the extensions are an implementation guide and example scripts. The package delivers a file monitor agent and an ME destination to support the integration of factory floor equipment to SAP ME for discrete manufacturing industries. The package provides a light-weight, configurable, transformation and transaction engine and scripting capability, in the ME Destination, to support conditional processing. The delivered examples illustrate the parsing of a machine generated data file and the communication of some of this data to SAP ME via web services.
    PCo and the SAP ME PCo Extensions enable SAP ME to:
    u2022 Ensure that the correct components are going to be installed
    u2022 Track the Work in Process
    u2022 Collect traceability information from equipment
    u2022 Stop equipment to prevent the creation of bad product
    u2022 Log a nonconformance when a problem occurs at equipment
    u2022 Supply equipment with needed information, such as component material data
    Find out more:
    u2022 Download the extensions, implementation guide and example scripts via the SDN SAP Software download Catalog Link: http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/e04e4288-1208-2d10-48a7-e63029f1fe18

  • Using Plant Connectivity

    Hi,
    Is there a blog or document explains detailly using of Plant Connectivity?
    Thanks.

    Cemil - I see you now have dual identities on SDN with 2 different logins?
    If your company or customer was part of the ramp-up process for PCo 2.0 you would have access to the ramp-up knowledge transfer materails on service marketplace (http://service.sap.com/rkt).  The learning map for PCo contains numerous learning objects that used in conjunction with the help would probably address your question.
    Perhaps phrasing your inquiry as to what it is you are trying to accomplish would give the community better insight on how to help.
    Think of PCo 2.0 as a trigger agent that sends an xml message to a business logic transaction that starts a workflow, business process, or in essence just 'does something' based upon the PCo trigger condition being met.  From an integration standpoint it's a matter of creating the necessary transaction in MII and defining the InputXML property to receive the message from the PCO agent trigger.

  • MII and Plant Connectivity 2.2 Bi-directional Socket Connection

    Hi,
    I have to send a command to a serial device from within MII via a socket connection to be able to have a respons from the device.  I know in Plant Connectivity a socket connector can be setup. But is it also possible to send a message from MII to the serial device over Plant Connectivity, because it seems that the socket can only be setup to trigger notifications based on received messages from sources (and not from destinations). I read this functionality was planned to be build into Plant Connectivity 2.2, but I can't figure out how to set it up?
    kind regards,

    Hi Bram,
    We can set up connection between PCO & MII through "UDC" connector. UDC connector is available in MII through
    Data Services --> Data Servers --> New --> UDC and click on "OK" button.
    You need to provide all PCO system details like server name, Port number etc and save the connection. Check the status of connectivity through Data Services --> Connection Status.
    Go through the URL : http://help.sap.com/saphelp_mii121/helpdata/en/43/e80b59ad40719ae10000000a1553f6/frameset.htm
    Navigate to Data Services --> SAP MII Workbench --> Query Template --> Tag Query
    Upon successful connection, open SAP MII workbench (Data Services --> SAP MII Workbench) and create a new "Tag Query" template to pull details from PCO.
    So far, we pulled information from PCO, manipulated those values in MII and send these values to ERP to create notification. Let us know business scenario on which you need to send back information to PCO from MII.
    Thanks
    Rajesh.S

  • SAP SM59 Connection - Program Not Registered

    I created the SM59 in the SAP system and did the basic install using the BO Integration Kit XI release 2 on a Windows system.
    On the test using the SM59 I am getting:
    ERROR: program AERSND02_BO_SB2 not registered.
    AERSND02_BO_SB2 is the program ID I used in the BO install and is the program ID I used in the Registered Server Program in the SM59. The SAP system is a unix box and the BO system is on a different windows box.
    Also, When I execute the rfc_ping se37 program I get "Communication Failure".
    In the BO system tab "SAP" I can see the roles in my SAP system so the connection to the SAP system is functioning.
    Points awarded.
    Mike

    Muhammad, its helpful.
    Trying to configure BW Publisher.
    I verified that:
    1) BW Publisher has been started in windows.
    2) I executed netstat u2013an | find u201C3306u201D and see valid responses:
    xxx.x.xx.xx:2940     xxx.x.xx.xy:3306           ESTABLISHED
    xxx.x.xx.xx:3354     xxx.x.xx.xy:3306           ESTABLISHED
    This was promising!!
    3) My sm59 has valid values per the doc
    4) My sm59 gives me the following error response:
    ERROR: program mybox02_BO_XX2 not registered
    LOCATION: SAP-Gateway on host aersnd02.dcs.eis.lmco.com / sapgw06
    DETAIL: TP mybox02_BO_XX2 not registered
    5) The following link http://help.sap.com/saphelp_nw70/helpdata/EN/22/042652488911d189490000e829fbbd/frameset.htm shows:
    Activation Type Registration
    If the activation type is Registration, you have to identify a registered RFC program. With an SAP gateway, you can register an RFC server program under this ID and then wait for RFC calls from other SAP Systems.
    Example entry name: SERVER_EXEC
    6) When I run sapinfo.exe dest=bin I get:
    SAP System Information
    Destination            mybox01
    Host                   mybox01
    System ID              (extern)
    Database
    DB host
    DB system
    SAP release            640
    SAP kernel release     640
    RFC Protokoll          011
    Characters             1100 (NON UNICODE PCS=1)
    Integers               LIT
    Floating P.            IE3
    SAP machine id           560
    Timezone
    When I ran this sapinfo.exe to get the connection registered (using type=R) you can see that it did not get registered.
    Since the sap system is on unix and bo on windows I'm thinking that I need something on my sap system box pointing back to bo.
    Anyone been here b4? Points rewarded !!
    Edited by: Michael Hill on Jun 6, 2008 9:16 PM

  • SAP DB Connection from SAP BI on HP UNIX to MS SQL External Database

    Dear All,
    Greetings!
    I have a scenario to configure a SAP DB Connection from SAP BI System on HP UNIX 11i to the external legacy system MS SQL 2000 Enterprise for data upload. I am interested in connecting the SQL server as a Source System to the BI System.
    I read through documents mentioning about installation of a Client driver in the SAP BI System, I also downloaded the JDBC client software and tried installing the same, but the steps as mentioned Setting the CLASSPATH or connecting to the server did not work.
    Please help me in connecting the SQL Server as Source System, I would like to know in detail about the same - so kindly help me with the links to documents and guides about the same.
    Thank you
    Regards,
    Vineeth Damodar

    Short answer: this does not work.
    Long answer: To connect directly to the database you need
    - a database client for the source system
    - a database interface library for the source system
    Both of them are not available for HP-UX if the target database is SQL server --> doesn't work.
    What you can do is: add a Windows application server to your  BI system (heterogeneous installations work and are supported) and add there the database client and the database interface library.
    Markus

  • SAP Java Connectivity Builder -NoClassDefFoundError com.sap.aii...Reference

    Hi there,
    I'm trying to generate Java Proxies for SAPJCO using the SAP Java Connectivity Builder (JCB). I got it from the NetWeaver 6.20 Release. The tool installs and runs properly but after putting in the connection properties and klicking "next", the application hangs. When activating System output, I get the error shown below.
    I already tried to put all jar files contained in the C:\JBuilder5\lib\ext directiry into the classpath (but none of them contains the class mentioned).
    Which is the right (standalone) tool for generating Java Proxies for a standalone Java application?
    If it is JCB, is there a bug on the version I use (NetWeaver Release 6.20)?
    Any help would be apreciated.
    C:\JBuilder5>java -Dlog.handler.FileLog=FileHandler,log.txt -Dlog.logger.com=ALL,FileLog -cp lib/ext/aii_basis.jar;lib/e
    xt/aii_ifr_core.jar;lib/ext/aii_ifr_jbtool.jar;lib/ext/aii_lcraccess.jar;lib/ext/aii_msg_runtime.jar;lib/ext/aii_proxy_g
    en.jar;lib/ext/aii_proxy_rt.jar;lib/ext/aii_util.jar;lib/ext/aii_util_log.jar;lib/ext/lcrclient.jar;lib/ext/logging.jar;
    lib/ext/SapIdeHelp.jar;lib/ext/SapIdeJBUtil.jar;lib/ext/SapIdeJspInsight.jar;lib/ext/SapIdeTaglibReflection11.jar;lib/ex
    t/SapIdeTracing.jar;lib/ext/SapIdeUtil.jar;lib/ext/SAPJ2EEEngineJBuilderPlugin.jar;lib/ext/sapjco.jar;lib/ext/SAPmdi.jar
    ;lib/ext/servlet.jar;lib/ext/tc_sec_core.jar com.sap.aii.ifr.tool.jbuilder.JBuilderTool
    #0 12:35:37 [main] DEBUG com.sap.aii.util.misc.api.AIIProperties: Initial AIIProperties
            com.sap.aii.client = true
    #1 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.standalone" from "null" t
    o "true"
    #2 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.parserFactory" from "
    null" to "com.inqmy.lib.jaxp.SAXParserFactoryImpl"
    #3 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.transformerFactory" f
    rom "null" to "com.inqmy.lib.jaxp.TransformerFactoryImpl"
    #4 12:35:46 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.client.SAPNavigationPane: New file is C:\Documents and Setti
    ngs\kalkoo1\Desktop\t.jar
    #5 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Client : 010
    #6 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Logon Name : kalkoo1
    #7 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Password : #########
    #8 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Language : EN
    #9 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Host name: bgstsapedai01.s
    t.behr.de
    #10 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for System number : 20
    #11 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.client.R3LogonScreen: trying to establish connection
    #12 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Looking up identity
    #13 12:36:08 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.util.IdentityCheck: Results of identity check: isIFRServer: false;
    isIFRRMIClient: false; isStandaloneIFR: true
    #14 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Checking IdentityCheck.isIFRServer. Result: f
    alse
    #15 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.sap.SAPConnection: connecting to system 20 on bgstsapedai01.
    st.behr.de via JCo
    #16 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.sap.SAPUploadSource: init MDI to System bgstsapedai01.st.be
    hr.de (system=20, client=010) (BasisRelease: 620)
    #17 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.UploadBuffer: new UploadBuffer
    Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: com/sap/aii/ifr/client/editor/Reference
            at java.lang.Class.getDeclaredMethods0(Native Method)
            at java.lang.Class.privateGetDeclaredMethods(Unknown Source)
            at java.lang.Class.getDeclaredMethod(Unknown Source)
            at java.awt.Component.isCoalesceEventsOverriden(Unknown Source)
            at java.awt.Component.access$100(Unknown Source)
            at java.awt.Component$2.run(Unknown Source)
            at java.awt.Component$2.run(Unknown Source)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.awt.Component.checkCoalescing(Unknown Source)
            at java.awt.Component.<init>(Unknown Source)
            at java.awt.Container.<init>(Unknown Source)
            at javax.swing.JComponent.<init>(Unknown Source)
            at javax.swing.JTree.<init>(Unknown Source)
            at javax.swing.JTree.<init>(Unknown Source)
            at com.sap.aii.ifr.navigation.IFRJTree.<init>(IFRJTree.java:84)
            at com.sap.aii.ifr.navigation.IFRTreePane.buildPane(IFRTreePane.java:123)
            at com.sap.aii.ifr.navigation.IFRTreePane.<init>(IFRTreePane.java:33)
            at com.sap.aii.ifr.upload.client.SAPNavigationPane.<init>(SAPNavigationPane.java:43)
            at com.sap.aii.ifr.upload.client.SAPBrowser.setIsConnected(SAPBrowser.java:252)
            at com.sap.aii.ifr.upload.client.SAPBrowser$ConnectAction.actionPerformed(SAPBrowser.java:594)
            at com.sap.aii.ifr.upload.client.SAPBrowser$NextAction.actionPerformed(SAPBrowser.java:536)
            at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
            at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
            at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
            at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
            at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
            at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
            at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
            at java.awt.Component.processMouseEvent(Unknown Source)
            at javax.swing.JComponent.processMouseEvent(Unknown Source)
            at java.awt.Component.processEvent(Unknown Source)
            at java.awt.Container.processEvent(Unknown Source)
            at java.awt.Component.dispatchEventImpl(Unknown Source)
            at java.awt.Container.dispatchEventImpl(Unknown Source)
            at java.awt.Component.dispatchEvent(Unknown Source)
            at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
            at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
            at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
            at java.awt.Container.dispatchEventImpl(Unknown Source)
            at java.awt.Window.dispatchEventImpl(Unknown Source)
            at java.awt.Component.dispatchEvent(Unknown Source)
            at java.awt.EventQueue.dispatchEvent(Unknown Source)
            at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
            at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
            at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
            at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
            at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
            at java.awt.EventDispatchThread.run(Unknown Source)

    Hi,
    >> Error :- java.lang.NoClassDefFoundError: com/sap/aii/security/proxy/KeystoreHelp
    1) Can you check the class path  you have mentioned  is correctly
    2) Setting of the Java in your system ( Desk top /Lap top ) check the Proxy settings
    3) Re start the J2EE engine in the server
    Regards
    Agasthuri Doss

  • How to make SAP B1 connection with Windows Sharepoint Service 3.0

    how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
    public bool ConnectToCompany()
                oCompany = new SAPbobsCOM.Company();
                oCompany.Server = "192.168.1.58";
                oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
                oCompany.CompanyDB = "SBODemoUS";
                oCompany.DbUserName = "sa";
                oCompany.DbPassword = "abc";
                //oCompany.UseTrusted = true;
                oCompany.UserName = "manager";
                oCompany.Password = "manager";
                oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
                oCompany.LicenseServer = "192.168.1.58:30000";
                int i = oCompany.Connect();
                if (i != 0)
                    return false;
                return true;
    protected override void RenderContents(HtmlTextWriter writer)
                if (conn.ConnectToCompany() == true)
                    writer.Write("Hello" + this.Context.User.Identity.Name);
    Edited by: bikalg on Nov 28, 2010 9:43 AM

    Hi.......
    Welcome to SAP Business One Forum.....
    Unfortunately this is the wrong forum you posted here.
    I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
    Regards,
    Rahul

  • Creation of RFC destination for SAP-Access Connectivity

    Hi,
           I want to create a RFC destination for SAP-Access connectivity.
    Can I get some help regarding it's connection type,activation type and gateway options required for the same.
    Regrads,
    Anthony D'souza

    Hi
    Please see the following:
    1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
    2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
    TABLE DBCON Entry can be like this...depends on your External database..
    CON_NAME          Raj                      Logical name for connection
    DBMS                   MSS                   Microsoft SQL Server
    USER_NAME        <User name>       For SQL Server
    PASSWORD         <password>         " "
    CON_ENV             MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
    DB_RECO                 Availability type for an open database connect
    FUNCTION z_houston_connect.
    ""Local interface:
    EXEC SQL.
    CONNECT TO 'RAJ' AS 'V'
    ENDEXEC.
    EXEC SQL.
    SET CONNECTION 'V'
    ENDEXEC.
    *- Get the data from MS-SQL Server
    EXEC SQL.
    open C1 for
    select
    l.loc_id,
    l.loc_name,
    a.acc_id,
    a.acc_name,
    d.person
    from ho_loc_mast as l
    inner join snd_acc_mast as a on l.loc_id = a.loc_id
    inner join snd_acc_addr as d on a.loc_id = d.loc_id and
    a.acc_id = d.acc_id
    where l.loc_id = '001'
    ENDEXEC.
    DO.
    EXEC SQL.
    FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
    ENDEXEC.
    IF sy-subrc = 0.
    PERFORM loop_output.
    ELSE.
    EXIT.
    ENDIF.
    ENDDO.
    EXEC SQL.
    CLOSE C1
    ENDEXEC.
    ENDFUNCTION.
    Regards,
    Raj

Maybe you are looking for

  • User exit for Dlvy Block at header for sales order for Companycode & materl

    Hi all, I have a requirement. I need to apply a Delivery Block for all sales orders which fall In a particualr company code "999" and if they have any configurable material in the item level. When a Sales Order is generated, during the process of gen

  • Account 113000 3000 not defined for tax postings

    hi while generating invoice getting the follwing error. "Account 113000 3000 not defined for tax postings"\ here 3000 is company  code. wats the solution for this...

  • N95 8GB My phone does not recognise some stored co...

    Hi somebody please help ! When receiving a text message from some of my stored contacts, instead of their name being displayed at the top of message, only their number is displayed, preceded by +447. I have tried deleting & re-entering correctly but

  • Character ~(ascii(126)) in Intermedia Text

    How can I search character '~' by a ConText Index or some string that contains it? The error is: select homepage from tabclients where contains(homepage,'~ee')>0 ERROR en lmnea 1: ORA-29902: error in executing ODCIIndexStart() routine ORA-20000: ConT

  • Headphone/Microphone 2nd edition

    I have a 2nd edition iPod Touch 8Gb running 3.1.2. My headphone/microphone always worked perfectly. Last month I had my unit replaced under warranty and now whenever I use voice memos or another app that requires headset/microphone when I plug the SA