Selection indicator for costing line items in production order

Dear all,
Do anyone know how to change field "AFVGD-SELKZ" of operation inside producion order? Any user-exit or standard program?
As content of field "AFVGD-SELKZ" is carried from routing. But is it possible to change in production order level?
Please kindly adivce.
Cheers,
Karen

Karen,
Let me give some more additional inputs, for an operation to become relevant for costing there are 2 options.
1. As Ramanujam suggested - Control Key.
2. In the Routing operation details you have a field to mark an <b>operation costing relevant this field takes priority over control key in defining the costing</b>. This field can be found in the operation details - General Data section of routing.
<b>Some tricks,</b>
What i mean here is a control key may not be relevant for costing, but still if this field is marked as costing relevant or percentage costs then this is the priority.
if this field is marked not relevant for costing  and if the operation has a control key relevant for costing then in this case control key takes priority.
In short what i meant is that you need to consider both "Control key" as well as the operation costing relevancy defination field.
Hope this helps your understanding in resolving your problem....Reward your points if so,
Regards,
Prasobh

Similar Messages

  • To Set Goods Receipt Indicator For Particular Line Items In SRM

    Hi All,
      i am working on BBP_DOC_CHANGE_BADI in SRM. i am trying to set the goods receipt indicator for particular line items based upon certain conditions. The values are being set in the badi. But when the Purchase Order is created in the backend R/3 i coudn't able to find the goods receipt indiactor being set..
    i used this field to set the GR indicator
      GR_IND = 'X'.  " Goods Receipt Indicator
    Can anyone help me in this?
    helpfull answers will be rewarded....
    Thanks,
    Murali

    To Murali and Christophe,
    I have set the GR and GR non val indicator in CREATE_PO BADI but I face the following situation :
    problem -
    In case of multiple account assignment in the shopping cart, the R/3 transaction ME21N sets these flags. 
    The flag status determined as per EBP conditions is lost.
    I need to retain the flag status as per EBP conditions even in this multiple account assignment scenario.
    proposed solution -
    - CREATE PO badi is already implemented in EBP and customised logic for GR and GR non valflag is in place.
    - I create user exit in R/3 backend system in ME21N transaction 
    - I make RFC call in this user exit to EBP and check the table BBP_PDPSET for the shopping cart.
    This is how I get the flag status as per EBP conditions and copy the same to R/3 thereby overriding the multiple account assignment check of the R/3 system.
    issue - 
    When I tried to verify that I can check the BBP_PDPSET table from R/3, I found that this table is not having entries for all the records in  CRMD_ORDERADM_I table.
    For which shopping carts will the BBP_PDPSET table not  be populated ?
    thank you in advance,
    Bhakti.

  • Group Indicator for Tax Line Items

    Hi,
    Can anyone tell me where can we define Group Indicator for Tax Line Items
    Thanks & Regards

    1) If you are going to post your program code, you should only post the relevant part.
    2) You certainly should take the time and effort to remove commented out code
    3) This is not a training forum. Before posting questions you should search - not just this site, not just using a search engine, but your course notes. Run the program in debug, and put some effort into determining the error. Then ask a colleague to help. Only if all that fails, post here.
    Thread locked.

  • Report for deleted line-items in Transfer Orders

    Dear All,
    Please help me in writing the code for "Report for deleted line-items in Transfer Orders".
    regards,
    nishu

    Thanks. Repor completed.

  • Activate Integrated Planning for Cost Line Items posting

    Hi all,
    Based on this SAP Help link, there are two ways to create plan line items:
    1) By adding the business transaction "Plan line items" to the user status of the WBS Element.
    2) By activating Planning Integration a.k.a. Integrated Planning for version and WBS Element/Project Profile.
    Option 1 works fine for me.
    However, option 2 does not seem to be working when I activate it, contradicting the state from the link:
    If planning integration is active in the fiscal-year-dependent parameters of the relevant planning versions, the system writes cost element planning line items for plan-integrated WBS elements, regardless of user status.
    So far what I have customized is:
    -In transaction OKEV, select the version, click on "Settings for Each Fiscal Year" and double click for the year. Then I mark both "Integrated Planning" and "Integrated planning with cost center/bus. processes" checkboxes.
    -Activate "Integrated Planning" at Project Profile level: go to transaction OPSA, select Project Profile, go to tab "Controlling" and mark "Integrated Planning".
    Nevertheless, when I post plan costs from transaction CJR2 using the customizing above (based on second option), I see no cost lines when running CJI4.
    I wonder if there is something missing in customizing that allows me to see posted cost line items in CJI4. I would appreciate very much your help.
    Many thanks and best regards,
    Pablo

    Hi Gokul,
    Many thanks for the link to that threat, Rachel Tang's reply on that discussion is very complete and included the answer to my question.
    She comments that three points must be checked to activate Integration Planning:
    1) Mark "Integrated Planning" at CO Version/Year level (SPRO > Controlling > General Controlling > Organization > Maintain versions).
    2) Mark "Integrated Planning with costs centers/bus. processes" at CO Version/Year level (same transaction).
    3) Ensure WBS Element has Integration Planning marked (PRPS-PLINT = X). [It looks like this is done automatically by marking Project Integration at Project Profile level BEFORE project is created]
    In my case, I had first and second steps correct. However, even though I had marked Integration Planning at Project Profile level, it seems that already created Project Definitions are not updated with new Integrated Planning value after it is changed at Project Profile level.
    Maybe it is possible to modify WBS Element's Integration Planning flag manually (though SAP OSS Note 301917 states that this is impossible), otherwise I could never achieve Integration Planning for already created projects.
    In my case it would be more suitable to use the alternative of adding Business Transaction "Write plan line items" to User Status.
    Many thanks to Sanjeev and Gokul for your help.
    Best regards,
    Pablo

  • New contract account for every line item in subscription order....

    Hi Guys,
    I am having a problem with the subscription order.
    Whenever I change the subscription order and add a line item to it, SAP by default  creates a new contract account for that line item. Whereas I want to assign the same contract account to the second line item also.
    Can you suggest me any solution for this problem?
    Thanks in advance...
    Regards,
    Abhay

    Hello Abhay,
    This is the normal and correct function for SAP. If you would like for the subscriptions to be on the same contract that you subscriber has, an enhancement has to be developed.
    We had a similar requirement and an enhancement was developed per specifications.
    Regards,

  • Multiple sales deal for a line item in the order

    Hi,
    We are planning to use sales deals but i'm wondering as the sales deal is entered at condition record level, If i have one line item on an order and that this line item will have several sales deal eligibible (several condition records with different sales deal) What sales deal number will be saved on the VBAP table and VBRP table (sales and billing document). The sales deal is not saved at condition level (KONV) ?
    Does anyone know that ?
    Thanks
    Myriam.

    Hi, Gurus,
    Any answer to that question, please ?
    Thanks.
    Myriam.

  • How to configure Two Tax Codes for single line item in work order

    Hi All,
    Please do Review the below scenario and tell me how to solve it.
    A) Certified Work Done Gross Bill Amt      100,000      
    Total Work Done Value      100,000      
    Less : Labour & Like Charges @ 30 % on Rs 100,000 =  30,000      
    Vat applicable Amount =      70,000      
    Add VAT @12.5%  Chargeable on Taxable Turnover of Rs. 70,000.00     = 8750
    Total Bill Value = 108750
    Service Tax @ 12.36% on 33% Value of Rs. 100000     = 4079
    G.Bill Amt = 112829
    Total Amt Due for Payment = 112829

    HI,  There is a possible solution for this scenario.
    1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
    2. While posting the Invoice (TRX - FB60) following steps need to be followed.
    3. Amount has to be split into two line items
    4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
        created for 12.5%
    5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that    
        was created for 12.36%.
    Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
    Regards
    K.Sanjai Babu

  • How to get report for deleted line items from sales orders

    Dear FRIENDS,
    please infirm the t.code or report for viewing the deleted line items from sales ordrers.
    Kindly do the neeedful.
    regards,
    N.M.PAWAR

    Hi,
    With transaction SE16 you can view table CDHDR for header changes and
    CDPOS for item changes. This includes deletion.
    OR
    GO to VA03 - Display Sales order -> Put order no : don't press enterbutton. -> Go to Enviornment -> changes -> You will get details
    Date ItmNo. SLNo Action
    Hope this help please close the thread if answers

  • Provision that MRP is not be considered for specific line item of Sales Ord

    Is their any provision that MRP is not be considered for specific line item of Sales Order in MRP run? (Ex: Planned order is also generated for free/ADC sample quantity entered in Sales order)

    Dear
    Go to Sales and distribution--> Sales --> Sales Documents -->Schedule Lines --> Assign schedule line categories.
    Choose the item category (eg. TAN)  which is coming in the sales order and enter CN - No. Mat. Planning in the the manual schedule line category (MSL Ca) for MRP type PD.
    This will enable you to choose while creating sales order in the Tab procurement column SL Ca.
    Choose CN - No mat.planning for the schedule items which you don;t want MRP.
    Regards
    Soundar

  • How can I activate drill down report for planned line items please urgent?

    Hi Everyone,
    Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
    Kind regards
    Arvey.

    Hi
    It is based on the reports attached in the Report Group - TCODE: GR53
    In the Report Group screen
    Press CONFIGURE – This is to attach any Drill Down reports.
    Press the “Insert Line” icon
    As is the screen may be used to insert a Report Writer report group. To add an ABAP, press “other report type”
    Double click on “ABAP Reports”
    Enter the name of the ABAP and ENTER
    <b>RCOPCA08                       Profit Center: Plan Line Items</b>
    VVR

  • KOB1 - Display Actual cost line items for Orders

    Hi All
    A production order has been settled. When the actual cost line items are displayed for the said production order in KOB1, there are multiple line items related to the production order that gets displayed.
    The issue we are facing is, in one of the line item, the accounting document has one credit (Consumption a/c) and two debits (one debit is to inventory a/c and another debit is to price difference a/c). However in the report, in the offsetting GL column only one GL code (price difference gl account a/c) but appears with the entire amount.
    Ideally two separate line items needs to be displayed with respective line items. Is this a flaw in SAP.
    Can anybody throw some light on this and help me.
    Regards
    Prasanna

    this is may be config issue.
    can you explain with accounting entries for said line items and offsetting GL for each line?
    regards.
    ashok

  • Actual cost line items for network

    Hello all,
    is there a way to display actual cost line items for networks? I have tried the following ways:
    - CJI3
    - KOB1
    When entering only the network number, the error message KB422 is displayed (No line items were selected). When entering the WBS number to which the network is attached the costs are displayed.
    Any ideas? Thank you!
    Regards
    Christian

    Christian Philipp wrote:
    H
    > When entering only the network number, the error message KB422 is displayed (No line items were selected).
    There is no actual posting against the network exists.
    Christian Philipp wrote:
    When entering the WBS number to which the network is attached the costs are displayed.
    after running double click the document number and check the account assignment whether it is to WBSE or to Network activity. It will clear your doubt.

  • FM for Actual cost line items for orders.

    HI EXPERTS,
    I was working on Actual cost line items for orders / Internal orders of an employee.
    standard program RKAEP000 is present through TCODE KOB1.
    I want some customization of report, so debugged the program and found that its using a FM 'K_LINE_ITEMS_SELECT_AND_LIST' to calculate internal orders.
    But the FM has used REUSE_ALV_* and displaying output itself.
    the requirement is to customize the output display .
    I searched with K_LINE_* and found some other function modules too.
    K_LINE_ITEM_CHECK                                                                               
    K_LINE_ITEM_APC_SIGN_GET                                         
    K_LINE_ITEM_GET_CONTEXT_MENU                                     
    K_LINE_ITEM_GET_TOOLBAR                                          
    K_LINE_ITEM_LOGICAL_KEY_GET                                      
    K_LINE_ITEM_TECH_SETTINGS_SET                                    
    K_LINE_ITEM_VALUE_TYPES_GET                                      
    K_LINE_ITEM_VALUE_TYPES_SET                                                                               
    K_LINE_ITEMS_ACT_GRID                                            
    K_LINE_ITEMS_SELECT                                              
    K_LINE_ITEMS_SELECT_AND_LIST                                     
    K_LINE_ITEM_ACT_CALL_WITH_DATA                                   
    K_LINE_ITEM_ACT_DATA_GET                                         
    K_LINE_ITEM_CM_CALL_WITH_DATA                                    
    K_LINE_ITEM_DEV_CALL_WITH_DATA                                   
    K_LINE_ITEM_PLN_CALL_WITH_DATA                                   
    K_LINE_ITEM_PROCESS_UCOMM_ACT                                    
    K_LINE_ITEM_STEERING_GET                                                                               
    Can anybody tell which FM should i use so that result i will get in an internal table?
    or suggest any other methods
    Thanks in Advance.
    Lucky

    I also had the same requirement and used function module K_LINE_ITEM_ACT_DATA_GET
    this function is calling K_LINE_ITEMS_SELECT_AND_LIST function with  I_NO_DISPLAY parameter
    and returning the result.
    Already they are in same function group,
    I wrote this for future requirements of people  after 4 years of this thread

  • Transaction KSB1 - Display Actual Cost Line Items for Cost Centers

    Hi,
    When I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my offsetting accounts (accumulated depreciation accounts) are shown except for the ones for asset classes:
    - Buildings
    - PC & Small Applications
    On the FI side, I can see transactions being posted to their relative accumulated depreciation accounts but I do not see this on the CO side when transaction KSB1 is executed. I have checked the config and the account assignments look correct. Also, the assets created have cost centers assigned to them.
    Could you please help!
    Thanks,
    - Deki

    Hi Murali,
    I have one depreciation expense account (P/L Account) which is also a cost element.
    During depreciation run, the different asset classes are supposed to hit the depreciation account above and their corresponding accumulated depreciation accounts (These are Balance Sheet Accounts and I have separate accounts for each asset class .. ie: Accumulated Depreciation for Furniture and Fixture for asset class Furniture and Fixture).
    Now when I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my accumulated depreciation accounts are shown except for the ones for these asset classes:
    - Buildings
    - PC & Small Applications
    Any thoughts on why the above aren't showing?
    Thanks!  I really appreciate your help!
    - Deki

Maybe you are looking for