Multiple sales deal for a line item in the order

Hi,
We are planning to use sales deals but i'm wondering as the sales deal is entered at condition record level, If i have one line item on an order and that this line item will have several sales deal eligibible (several condition records with different sales deal) What sales deal number will be saved on the VBAP table and VBRP table (sales and billing document). The sales deal is not saved at condition level (KONV) ?
Does anyone know that ?
Thanks
Myriam.

Hi, Gurus,
Any answer to that question, please ?
Thanks.
Myriam.

Similar Messages

Calculate sales tax based on all line items on the order

My users have asked to determin tax on the sales order, based on all the line items on the order. For example, if all the items are for product only, or if all the line items are for labor only, or if there is a mix of product and labor,
Order 1
line 1 product flag as both for vertex
line 2 labor flag as both for vertex
Order 2
line 1 product flag as product only
line 2 product flag as product only
Order 3
line 1 labor flag as labor only
line 2 labor flag as labor only
I do not see away to do this while the order is being created. In the order 1 example above, line one is entered, priced, and taxed as product only (it is the only line on the order at that time and it is product only). Line two is entered, it is marked as both. But I cannot send line item one back through vertex marked as both. Vertex processing is already complete.
I have looked at using both FYTX0001 and FYTX0002. With both of these exits I can only work with a single line item, i.e. once item one is processed it will not go through the exit when item two is added.
Any assistance would be appreciated.
Jay

Hi WCG,
Our business is located in California as well. California is a modified-origin state, where state, county, and city taxes are based on the origin of the sale, while district taxes are based on the destination of the sale. You only need to add Sales tax when your customer's billing address is in California. I do not believe that Catalyst currently supports district based sales tax. You could look into a third party solution like TaxJar and see if it could be integrated into Catalyst. We currently charge our California based customers exactly what we would charge them in our retail store.
So you want to do something like this:
-Ryan

Report for deleted line-items in Transfer Orders

Dear All,
Please help me in writing the code for "Report for deleted line-items in Transfer Orders".
regards,
nishu

Thanks. Repor completed.

How to create an inspection lot for each line item of the Purchase order?

Hi,
How to create an inspection lot for each line item of the Purchase order ?
In detail if possible.

Hi
please check this
[thread|Create Inspection Lot;

Custom table Not deleting the line items on the order.

Hi All
I have an issue, In SAP we have created a custom table which is related to ship to party, as and when we delete any line items in the order(VBAP) it should update /delete the custom table but it is not deleting, while when we create any line items in the order (VBAP) it is updating the entries in the custom table which is suppose to happen.
Please let me know your inputs.
Thanks,
Ram

UPDKZ is not a field name. it is the processing status of a line or order.
If UPDKZ is I , its initial, like adding a new line
If UPDKZ is U, its update. Like changing or modifying an existing line
....so on...
Regards
Sai

Problem in invoice printout for second line item of the contract.

Hi,
There are two line items in the contract. Both with different material and different plants. 1st line item with plant japan, and 2nd line item with plant singapore. But, when i try to take printout for 2nd line item after invoicing it, the address appearing in printout is of Japan instead of singapore.
Any idea why this happening?
Please revert back asap.

Hi Chetan,
If that is a header output, then there are issues at the design level itself. You have an output as header output and you expect the item level details to be printed in two different printouts.How is this handled in the program. Mostly header outputs are used to print the details abotu all the items in the doucment , not for a specific item. If you want to print a specific item only , then it is always advisable to configure the output as item output.
Leaving that aside, the problem lies in the code. You may be selecting the item number when you are printing the details of the second item, but for printing address, you are not coding using the item number.
To prove this test this scenario.
Create an order with first item belonging to Singapore plant and second item Japan plant.
Now create the otuput for item1----it will work fine
Do the same for item2-----Now, the plant address will be of Singapore, while the material belongs to Japan.
If this happens, it can be safely assumed that problem lies in the code. Do this test and then if the problem is in the program, discuss with your developer, he will rectify the bug for you.
You can reward me if this solves your problem.

New contract account for every line item in subscription order....

Hi Guys,
I am having a problem with the subscription order.
Whenever I change the subscription order and add a line item to it, SAP by default creates a new contract account for that line item. Whereas I want to assign the same contract account to the second line item also.
Can you suggest me any solution for this problem?
Thanks in advance...
Regards,
Abhay

Hello Abhay,
This is the normal and correct function for SAP. If you would like for the subscriptions to be on the same contract that you subscriber has, an enhancement has to be developed.
We had a similar requirement and an enhancement was developed per specifications.
Regards,

Sales order create/change line item with reference to contract - Open quantity not getting deducted for copied line item from the contract

Hi friends,
Please provide some valuable inputs for the following scenario:
When a sales order line item is created(VA01) or changed(VA02) with reference to a Contract the open quantity is deducted in the contract which is a standard functionality. If the referenced line item is copied (custom enhancement to copy line item), then for the copied line item the open quantity is not getting deducted instead ATP quantity i.e. Available-to-promise is deducted.
Any inputs on how we can fix this functionality i.e. deduct the open quantity from the contract for the copied line item?
P.S. : Custom enhancement to copy line item is working fine, but open quantity is not getting deducted if the copied line item was referenced to a contract.
Thanks,
Sandeep
Message was edited by: sandeep

Sandeep,
Yes, that was my original interpretation. I was having a hard time believing that someone would ask such a question.
I guess, then, that you already know that you will have to add this logic to your enhancement. You should create your specifications and hand them off to a developer; ideally the one who created this enhanced solution in the first place.
I do not provide advice in these forums about details of enhanced solutions. Perhaps one of the other members will be more willing to do your work for you.
Best Regards,
DB49

Service PO - Multiple account assignments for service line items

Hi All,
I'm trying to create a service purchase order using BAPI 'BAPI_PO_CREATE1'.
But i need to create service line items with multiple account assignments say
For line item 10 -
1)Service line 1 -Cost center 'XYZ'.
2)Service line 2 -Cost center 'ABC'.
In POACCOUNT there is no option to specify the service line item .
Moreover in POSERVICES also there is no option to mention costcenter.
How can i create the same...
Thanks in advance
Regards
Prasanthi

Dear Prithviraj,
CAPEX (Category 'A'), can it apply to OPEX/Blanket and Sm. Proj?
I know create multiple account assigment under ME51N/ME52N.
Any solution by using FM (BAPI_REQUISITION_CREATE and BAPI_REQUISITION_CHANGE)?
thanks
Regards,
Weng

How to configure Two Tax Codes for single line item in work order

Hi All,
Please do Review the below scenario and tell me how to solve it.
A) Certified Work Done Gross Bill Amt      100,000
Total Work Done Value      100,000
Less : Labour & Like Charges @ 30 % on Rs 100,000 = 30,000
Vat applicable Amount =      70,000
Add VAT @12.5% Chargeable on Taxable Turnover of Rs. 70,000.00     = 8750
Total Bill Value = 108750
Service Tax @ 12.36% on 33% Value of Rs. 100000     = 4079
G.Bill Amt = 112829
Total Amt Due for Payment = 112829

HI, There is a possible solution for this scenario.
1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
2. While posting the Invoice (TRX - FB60) following steps need to be followed.
3. Amount has to be split into two line items
4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
    created for 12.5%
5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that
    was created for 12.36%.
Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
Regards
K.Sanjai Babu

Selection indicator for costing line items in production order

Dear all,
Do anyone know how to change field "AFVGD-SELKZ" of operation inside producion order? Any user-exit or standard program?
As content of field "AFVGD-SELKZ" is carried from routing. But is it possible to change in production order level?
Please kindly adivce.
Cheers,
Karen

Karen,
Let me give some more additional inputs, for an operation to become relevant for costing there are 2 options.
1. As Ramanujam suggested - Control Key.
2. In the Routing operation details you have a field to mark an <b>operation costing relevant this field takes priority over control key in defining the costing</b>. This field can be found in the operation details - General Data section of routing.
<b>Some tricks,</b>
What i mean here is a control key may not be relevant for costing, but still if this field is marked as costing relevant or percentage costs then this is the priority.
if this field is marked not relevant for costing and if the operation has a control key relevant for costing then in this case control key takes priority.
In short what i meant is that you need to consider both "Control key" as well as the operation costing relevancy defination field.
Hope this helps your understanding in resolving your problem....Reward your points if so,
Regards,
Prasobh

How to trigger Condition Access sequence multiple times for one line item?

Hi,
We have a situation that, User will enter a Promo code (custom Field) in Sales order Header Additional data B tab to apply discount for line items.
Logic goes like this:
1. For each Promo code .. there may be multiple sale deals (Max 3 at this point).
2. For each line item (refering to tkomp table) we have to apply the sale deals (found above) the Condition access sequence will pick the right sale deal to apply the line item.
3.we have enhanced the tkomp structure to hold the sale deal.
Challenge:
As we have the standard logic to trigger the condition access sequence once for each line item, how we can apply 3 sale deals for single line item. Is there any logic or way to trigger the condition access sequence multiple times for single line item with diffrent sale deals. ~ There may be one valid sale deal for one line.
Functional team maintained diffrent access tables in the access sequence!!!
Fnds, please help me to get some clue
Thanks,
Sunil Y

Hi Eduardo , Thanks for the response.
I am trying to explain again, this is the requirment given by the functional guys.
we have Promo code in Hearder Addtional data B tab --> Have to retrieve Sale Deals -->
At this point of time we may have at max 3 Sale Deals. we don't know which sale deal is vallied for which item we have in TKOMP. We have enhanced the TKOMP structure to hold one sale deal only (ZZPROMO).
We have enhanced USEREXIT_PRICING_PREPARE_TKOMP in RV60AFZZ to populate the value in TKOMP. Then it will go for diffrent access sequence to find the proper condition.
Our challenge is that, for each line item we have 3 sale deals, we don't know which one is valid for which line. but we have to apply the vallied sale Deal to the line items. Line item 10 may have Sale Deal 2 , item 20 may have Sale Deal3 and 30 may have sale deal 1.
We may have solution, by fixing some thing in the code or through config. But i am confused that is it a valid requirment?
Please help me ...
Thanks,
Sunil Y

One PR for one line item in third party sales

Hi all,
When we create and save a third pary sales order, the system will create a Purchase Requesition.
If there are 5 line items in the Sales Order, the system will create only one PR for all the line items.
I will create only one sales order, and I want one PR for one line item of the sales order.
How to Configure this.
Regards
VASU

Vasu,
PR in the sales order is generated by the settings in Schedule line and Item category. In a particular sales order, if there are 5 line items and of same item category and schedule line then system will give only one PR number. Again if the item category ans schedule line is different then there will be multiple PRs.
Can you please elaborate more on your requirement. Again from one PR you can generate multiple PO
Thanks,
Raja

1 line item in the sales order ship to different shipping address

Hi,
Our customer A have 3 different branches (meaning 3 different shipping address).
During the creation of the sales order for 1 material A, I want to ship 50pc to this customer A:
10pc to address A1
20pc to address A2
20pc to address A3
In my sales order, is there a way I just create 1 line item with the order qty 50pc for this material A, but split into 3 schedule line with 3 different ship to address?
I know there is alternate way where I create 3 different line item (with order qty 10, 20 and 20) and change the ship to address in the Item -> Partner tab. But using this method, I have to create 3 times of the same material in 1 sales order, just with the different shipping address.
I want to know is there a way I just need to create 1 line item?
Kindly please advise. Thank you.

Hi there,
When you have 3 different ship-to address, system will anyway create 3 different deliveries. This is coz if the header data in shipping (ship-to) is different, system will split the deliveries. Routes are different to 3 ship-to addresses & they cannot be combined in the same delivery.
So as mentioned in above thread, create 3 different line items or create different sales orders all together for different ship-to parties.
Regards,
Sivanand

Different Cost Centers for Different Line Items in a single Reservation

Hello Gurus,
When we create a Material Reservation, we give the cost center at the header level and that cost center is accounted for each of the line items in the reservation. But when the reservation has many line items which depend on different cost centers, there is a need to enter different cost centers for different line items in the same Material Reservation. How can this be done? Please suggest.

Hi,
It's a standard restriction in SAP functionality where one reservation document can only accommodate one cost center.
You can not maintain multiple cost centres for individual line items.
You have to create seperate Reservations for each cost centre.
check below thread:
ONE RESERVATION FOR DIFF COST CENTERS
Umakanth R
Edited by: Umakanth R on Dec 8, 2011 7:53 AM

Multiple sales deal for a line item in the order

Similar Messages

Maybe you are looking for