Seperate NT service for App server and Process Scheduler
Is it possible to create a separate NT service for App server and Process Schedule for the same environment? Everytime i need to shutdown either App Domain or Prcs Domain (not both) using service, it brings down both.
I could use psadmin but services run as a different user.
Please advise.
What PeopleTools release are you using? Off the top of my head, one strategy would be to use different PS_CFG_HOMEs for the App and the Process scheduler. The service points to the PS_CFG_HOME and reads the pswinsrv.cfg file to know what to start/stop. I'm not sure there is a way to override psntsrv and tell it to use a different config file, so you may need a different HOME. You could also create a script that wraps the service start/stop. It could edit/update the config file prior to stop/start and remove Process Scheduler from the config and then reinsert it later.
You could have a stop_app/start_app and stop_prcs/start_prcs script that would copy in specific versions of the pswinsrv.cfg file for what you want to do.
Similar Messages
-
Restarting App server and Process Scheduler
Hi all,
Can any body send me the document on how to Restart App server and Process Scheduler.
Thanks In Advance
KarthikUse the psadmin utility under $PS_HOME/appserv.
https://peoplebooks.uta.edu/PSOL/pt846books/eng/psbooks/tsvt/chapter.htm?File=tsvt/htm/tsvt03.htm%23H3005
Nicolas. -
App Server and Process Scheduler stuck while booting
Hi All,
We are facing a big issue in our production instance.The application server showed down while accessing the PIA.When we tried to reboot the same it didnt start and was getting stuck after some steps..few snipets are below after the last PSSRENSRV process does not proceed further.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5584 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5600 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5616 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5632 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5648 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5664 Assume started <pipe>.
exec PSRENSRV --A -- -C psappsrv.cfg -D FNPROD -S PSRENSRV:The tuxedo,appserv and renserv logs shows,
renserv log
----- Begin booting PSRENSRV -------------------------
0.5608 [14/Jul/2011 07:51:54](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
----- Begin booting PSRENSRV -------------------------
0.5056 [14/Jul/2011 07:58:47](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
----- Begin booting PSRENSRV -------------------------
0.780 [14/Jul/2011 08:21:04](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.------------------------------------------------------------------------------------------
tuxedo log
receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.5060.5084.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSH.4364.1752.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.4472.4416.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.1684.4128.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.4256.4172.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.4876.496.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSH.4896.4284.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.4800.1036.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:703: ERROR: Cannot get statistics on message queue 43
082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
082104.UKLO2K3S55!WSL.3904.4032.0: WSNAT_CAT:1197: INFO: Exiting system
082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 61480 (errno = 22)
082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1197: "INFO: Exiting system"
082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082104.UKLO2K3S55!JSL.4316.4024.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=2,buf=9580216,bytes=4572,type=-1073741824,flag=2048
082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving------------------------------------------------------------------------------------------
app serv log
PSADMIN.4944 (0) [07/14/11 07:48:28](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.4720 (0) [07/14/11 07:48:33] Starting
PSADMIN.4944 (0) [07/14/11 07:52:29](0) End boot attempt on domain FNPROD
PSADMIN.4944 (0) [07/14/11 07:55:46](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.1412 (0) [07/14/11 07:55:50] Starting
PSADMIN.4892 (0) [07/14/11 08:08:07](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.5032 (0) [07/14/11 08:08:13] Starting
PSADMIN.4892 (0) [07/14/11 08:08:27](0) End boot attempt on domain FNPROD
PSADMIN.6104 (0) [07/14/11 08:20:28](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.6124 (0) [07/14/11 08:20:32] Starting-----------------------------------------------------------------------------------------
tuxedo log
213815.UKLO2K3S55!PSSAMSRV.6072.6040.0: LIBTUX_CAT:262: INFO: Standard main starting
213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: LIBTUX_CAT:262: INFO: Standard main starting
214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=257,buf=10285048,bytes=4572,type=-1073741824,flag=0
214434.UKLO2K3S55!PSRENSRV.2440.2444.-2: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=277,buf=11551960,bytes=8668,type=805306369,flag=0
214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=257,buf=10285048,bytes=4572,type=0,flag=0
214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 33242 (errno = 22)
214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
214434.UKLO2K3S55!BBL.5964.4464.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=258,buf=9654368,bytes=27996,type=-1073741824,flag=2048
214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving
214507.UKLO2K3S55!tmboot.4616.5152.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
214507.UKLO2K3S55!tmboot.4616.5152.-2: TUXNT_CAT:4: ERROR: Cannot access ipc server (The system cannot find the file specified.
214507.UKLO2K3S55!tmboot.4616.5152.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
214508.UKLO2K3S55!PSADMIN.868: End boot attempt on domain FNPRODAlso the process scheduler was not getting booted the logs are shown below,
scheduler log
085646.UKLO2K3S55!restartsrv.2484.4116.-2: server BASE/101: CMDTUX_CAT:587: INFO: Cannot restart server, scheduling for cleanup
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:550: WARN: Cleaning up restartable server BASE/101
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 4300 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5372 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5640 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5768 died; removing from BB
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: 07-14-2011: Tuxedo Version 8.1 32-bit Windows.
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: GP_CAT:1077: ERROR: Unable to open environment file E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env for reading
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: LIBTUX_CAT:353: ERROR: Error putting ENVFILE E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env into environment
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: server BASE/101: CMDTUX_CAT:551: INFO: server removed
085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 64479 (errno = 22)
085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
085743.UKLO2K3S55!BBL.4044.5996.0: CMDTUX_CAT:26: INFO: The BBL is exiting systemIs this a problem with Tuxedo if so what has to be done...Pls help its a bit urgent...
Thanks in advance...First of all; if a problem is urgent then you should always contact Oracle support instead.
It looks like the domain is corrupt within Tuxedo. You could try to reconfigure the domain so that it will get recreated in Tuxedo. Make sure you have a backup before you do this. To reconfigure the domain simply open a CMD box and type the following command (from the appserver directory):
psadmin -c configure -d "DOMAIN_NAME"
You can only use this command for the application server. -
How to get text file from app server and process it.
Hello experts,
I created a test data based form my recording. Now, I do not know where can I find it.
Also, I want to create a program that lets users input the file name in the input parameter
(selection screen) and it would automatically process/split that file. Again, thank you guys
and take care!hi viray,
im sorry i thought it was reading from presentation server....:-)
>>I want to create a program that lets users input the file name in the input parameter
(selection screen)
at selection-screen on value-request for p_file.
perform file_help using p_file.
form file_help using p_p_file.
call function 'RZL_READ_DIR_LOCAL'
exporting
name = p_dir
tables
file_tbl = t_filetab
EXCEPTIONS
ARGUMENT_ERROR = 1
NOT_FOUND = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " file_help
Splitting File and path.
use the FM <b>SO_SPLIT_FILE_AND_PATH</b>
hope this helps,
do reward if it helps,
priya.
Message was edited by: Priya -
Migration Accelerator - Public IP address requirement for Config Server and Process Server
Currently, when installing the Migration Accelerator components, the Config Server's public IP address must be specified in several places. In the released version of Migration Accelerator, could this be changed to allow customers to specify a public
DNS domain name instead? Using a Public IP address for the Config Server in Azure represents a risk that this public IP may change (unless using the new Reserved VIP Capability in Azure) which could require reconfiguration of several MA components. If
a DNS name will not be supported in the released version of MA, then the documentation should be updated to step through provisioning a Reserved VIP for the Config Server in Azure.
Similarly, if running the Process Server on Amazon AWS (in an Amazon AWS -> Azure migration scenario), either DNS names should be supported for the Process Server configuration or a reference in the document should be added to step through acquiring an
Elastic IP Address for the Process Server.Thanks Keith for your feedback; we will update the document to reflect this. We will look into improving this in functionality in the released version.
Thx - Srinath -
Installing NT service for app and process scheduler (Windows 2003)
I have followed the install guide instructions for creating an NT service for the process scheduler, however, whenever I attempt to start the service I receive the following warning message:
The PeopleSoft H:\apps\psoft\PT849 service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service.
The service does not start properly, however when launching the services via psadmin, both the app and process scheduler processes start properly.
Any assistance would be appreciated.I have followed the install guide instructions for creating an NT service for the process scheduleWhat are the doc you've followed ?
It is well explained here below :
http://download.oracle.com/docs/cd/E05406_01/psft/acrobat/hwtools849_itora.pdf
Task 10A-5: Starting Process Scheduler as a Windows Service
Furthermore, describe what steps have been done.
Nicolas. -
After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"
The system logs reads:
Mar 29 22:06:25 server servermgrd[82]: servermgr_web: Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
undefined method `downcase' for nil:NilClass
." UserInfo=0x7fc547901080 {NSLocalizedDescription=Failed to read settings: Exception:
undefined method `downcase' for nil:NilClassTo check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops. -
Failed to start server domain and process scheduler in the App/Batch VM
Hi,
after the modification of /etc/tnsnames.ora in the App/Batch VM :
[psadm2@psovmab LOGS]$ more /etc/tnsnames.ora
H91TMPLT=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.133)(PORT=1521)))
(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=H91TMPLT.corp.peoplesoft.com))
I can't start server domain and process scheduler :
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 197; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 198; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec BBL -A :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 773; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 495; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
Attempting to boot ... INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSWATCHSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSQRYSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSQRYSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D APPDOM -S PSSAMSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKHND_dflt:BrkProcess -- -D APPDOM -S PSBRKHND_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKDSP_dflt:Dispatch -- -D APPDOM -S PSBRKDSP_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBHND_dflt:PubConProcess -- -D APPDOM -S PSPUBHND_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBDSP_dflt:Dispatch -- -D APPDOM -S PSPUBDSP_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBHND_dflt:SubConProcess -- -D APPDOM -S PSSUBHND_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBDSP_dflt:Dispatch -- -D APPDOM -S PSSUBDSP_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSMONITORSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //hrapp.xflash.com:9000 -m 5 -M 7 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JREPSVR -o ./LOGS/stdout -e ./LOGS/stderr -A -- -W -P /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 774; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
ThanksHi,
- Which user are you connected with when running psadmin ?
psadmin2
- the output :
{[psadm2@hrapp appserv]$ ./psadmin
PSADMIN -- Tools Release: 8.50.02
Copyright (c) 1988, 2009, Oracle. All rights reserved.
PeopleSoft Server Administration
1) Application Server
2) Process Scheduler
3) Search Server
q) Quit
Command to execute (1-3, q): 1
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 1
Tuxedo domain list:
1) APPDOM
Select domain number to administer: 1
PeopleSoft Domain Administration
Domain Name: APPDOM
1) Boot this domain
2) Domain shutdown menu
3) Domain status menu
4) Configure this domain
5) TUXEDO command line (tmadmin)
6) Edit configuration/log files menu
7) Messaging Server Administration menu
8) Purge Cache
9) Preload File Cache
10) Clean IPC resources of this domain
q) Quit
Command to execute (1-10, q) : 1
PeopleSoft Domain Boot Menu
Domain Name: APPDOM
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
psappsrv.cfg has changed archiving old one...
Copying APPDOM/Archive/psappsrv.cfg to APPDOM/Archive/psappsrv_123109_1116_13.cfg
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec BBL -A :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 774; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
Attempting to boot ... INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSWATCHSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSQRYSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSQRYSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D APPDOM -S PSSAMSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKHND_dflt:BrkProcess -- -D APPDOM -S PSBRKHND_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSBRKDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKDSP_dflt:Dispatch -- -D APPDOM -S PSBRKDSP_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBHND_dflt:PubConProcess -- -D APPDOM -S PSPUBHND_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSPUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBDSP_dflt:Dispatch -- -D APPDOM -S PSPUBDSP_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBHND_dflt:SubConProcess -- -D APPDOM -S PSSUBHND_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSSUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBDSP_dflt:Dispatch -- -D APPDOM -S PSSUBDSP_dflt :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSMONITORSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //hrapp.xflash.com:9000 -m 5 -M 7 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
exec JREPSVR -o ./LOGS/stdout -e ./LOGS/stderr -A -- -W -P /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 773; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8}
-Are you able to connect onto the database from there with the same user ?
{[psadm2@hrapp appserv]$ sqlplus sysadm/SYSADM@H91TMPLT
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Dec 31 11:40:12 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>}
thank you in advance
JM -
As I mentioned in subject, I am just wondering Whether the java component (Not
ejb, not servlet) can be deployed in App Server and get the services provided
by App Server or not?Nevermind folks - I got it to work. All my configuration was correct; I had other issues with the ejb-jar file that the verifier informed me of (my previous deployments were with the verifier turned-off).
-
Pls Suggest server names for Reporting Server and Shared Services
Hi,
Can any one Pls Suggest server names for Reporting Server and Shared Services
Thanks in advance.Report server name: OrclRpt
Shared Services: OrclSS -
(Deployment) Minimum Software required for BUILD server and IIS WebServer
We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
Thanks in advance for the advice.Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install. Choose a Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install it.
Jason -
How can i access the information of my central app server and my AS
Hello i'm trying of configure my sld but when i'm about to create a technical system the wizard ask me for a central app server and App server (host and instance). where in my sap system can i found that information???. Sorry if the question is kind of obvious...i'm a beginner. Thanx in advance
Hi
SLD is for creating /Maintaining (including software product,components,etc..) system entries.
e.g.
If you want to create enrty for SAP R/3, Go to sld http://<hostname>://<port>/sld >> technical system >> select type as WebAS ABAP >> enter the ipaddress of the SAP R/3 server
You can get the details from your basis consultant or NW admin
Cheers
Jawahar Govindaraj
PS:Reward pts -
Unable to create ear after installing Visual Cafe plug-in for app server 6 sp3.
Installed WebGain plugin for app server 6 sp3. Now anytime I attempt to add a war to an ear in the deployment tool I get the following: xml file or ias xml file missing. Make sure that source archive "d:\......war" is saved before dragging. Obviously I have done this, but has this IDE plugin changed the xml parsers to a different version that could be causing this? Has anyone else ran across this error?
Hi,
Can you confirm to me, if you are using Visual Cafe Enterprise 4.5.1
and iAS 6.0 SP3. Also let me know the the name & version of O/S please.
Regards
Raj
Bob Pfingsten wrote:
Installed WebGain plugin for app server 6 sp3. Now anytime I attempt
to add a war to an ear in the deployment tool I get the following: xml
file or ias xml file missing. Make sure that source archive
"d:\......war" is saved before dragging. Obviously I have done this,
but has this IDE plugin changed the xml parsers to a different version
that could be causing this? Has anyone else ran across this error?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
Weblogic 8.1 App Server and IBM MQ Series 5.2 Issue
Hi All,
I am trying to create a bridge between Weblogic 8.1 App Server and IBM MQ Series 5.2 and i am facing issues.
Bridge works fine if i use QualityOfService="Atmost-once" and i am getting following error when i use
QualityOfService="Duplicate-okay".
Error:
<Oct 16, 2003 6:03:35 PM PDT> <Error> <MessagingBridge> <BEA-200015> <An error occurred in bridge "MQSeries WebLogic Bridge" during the transfer of messages (java.lang.Exception: weblogic.jms.adapter.JMSConnectionHandle.acknowledge(Ljavax/jms/MessageV).>
<Oct 16, 2003 6:03:35 PM PDT> <Warning> <MessagingBridge> <BEA-200026> <Bridge "MQSeries WebLogic Bridge" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was weblogic.jms.bridge.internal.MessagingBridgeException.)>
Any suggestions or comments will be really appreciated.
Thanks
Suresh
It is weird that nothing shows up in the log after you turned on the debug.
Actually I knew somebody has run into the same problem once.
The problem disappeared after he did something on the MQSeries side (like
restart the system and something else). I did not know exactly what he did.
I am not sure if that will help you but worth trying.
If that does work either, I'd suggest that you contact the BEA Customer Support
and somebody will look at it for you in depth.
Thanks,
Dongbo
Suresh wrote:
> Thanks for following up on this.
>
> This bridge works with 6.1 app server and we are trying to use the same stuff
> for 8.1 app server too. No, we are not using XAConnectionFactory.
>
> Suresh
>
> Dongbo Xiao <[email protected]> wrote:
> >Is there any chance that the JMS connection factory on the MQSeries
> >side is a XAConnectionFactory?
> >
> >Suresh wrote:
> >
> >> I am using the debug options (-Dweblogic.Debug.DebugMessagingBridgeStartup="true"
> >> -Dweblogic.Debug.DebugMessagingBridgeRuntime="true") in my stratip
> >script,
> >> but, thats the maximum stack trace I can get. I am using jms-notran-adp.rar
> >for
> >> both QOS. Bridge is working fine when I use Exactly-once and repeatedly
> >getting
> >> the same message when I use Duplicate_okay. My destination queue is
> >not able to
> >> ackowledge the messge to the sender.
> >>
> >> Here I am giving nodes from my config.xml
> >>
> >> <MessagingBridge AsyncEnabled="false" BatchInterval="40000"
> >> Name="MQSeries WebLogic Bridge"
> >> QualityOfService="Duplicate-okay"
> >> SourceDestination="MQSeries Inbound Destination" Started="true"
> >> TargetDestination="WebLogic Inbound Destination" Targets="myserver"/>
> >> <JMSBridgeDestination
> >> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDINoTX"
> >> ConnectionFactoryJNDIName="jms.InboundMessageConnectionFactory"
> >> ConnectionURL="t3://myserver:7001"
> >> DestinationJNDIName="jms.InboundMessageQueue"
> >> DestinationType="Queue"
> >> InitialContextFactory="weblogic.jndi.WLInitialContextFactory"
> >> Name="WebLogic Inbound Destination" UserName="username" UserPassword="pwd"/>
> >> <JMSBridgeDestination
> >> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDINoTX"
> >> ConnectionFactoryJNDIName="cn=MQ_BROKER_1,ou=inboundConnectionFactories,ou=mqseries,ou=jms,ou=Systems"
> >> ConnectionURL="ldap://ldapServer:389/o=myroot"
> >> DestinationJNDIName="cn=queue2,ou=queue,ou=mqseries,ou=jms,ou=Systems"
> >> InitialContextFactory="com.sun.jndi.ldap.LdapCtxFactory"
> >> Name="MQSeries Inbound Destination"
> >> UserName="cn=admin,o=myroot" UserPassword="pwd"/>
> >> <Application Name="jms-notran-adp"
> >> Path="C:\bea\weblogic81\server\lib" StagingMode="nostage" TwoPhase="true">
> >> <ConnectorComponent Name="jms-notran-adp"
> >> Targets="rdoddapaneni3" URI="jms-notran-adp.rar"/>
> >> </Application>
> >>
> >> Thanks
> >>
> >> Tom Barnes <[email protected]> wrote:
> >> >By the way, if you are looking to improve performance, transactional
> >> >mode may actually be the fastest. See the JMS Performance
> >> >Guide white-paper on dev2dev for details.
> >> >
> >> >Suresh wrote:
> >> >
> >> >> Hi All,
> >> >>
> >> >> I am trying to create a bridge between Weblogic 8.1 App Server and
> >> >IBM MQ Series 5.2 and i am facing issues.
> >> >>
> >> >> Bridge works fine if i use QualityOfService="Atmost-once" and i
> >am
> >> >getting following error when i use
> >> >> QualityOfService="Duplicate-okay".
> >> >>
> >> >> Error:
> >> >>
> >> >> <Oct 16, 2003 6:03:35 PM PDT> <Error> <MessagingBridge> <BEA-200015>
> >> ><An error occurred in bridge "MQSeries WebLogic Bridge" during the
> >transfer
> >> >of messages (java.lang.Exception: weblogic.jms.adapter.JMSConnectionHandle.acknowledge(Ljavax/jms/MessageV).>
> >> >
> >> >> <Oct 16, 2003 6:03:35 PM PDT> <Warning> <MessagingBridge> <BEA-200026>
> >> ><Bridge "MQSeries WebLogic Bridge" encountered some problems in one
> >> >of its adapters or underlying systems. It stopped transferring messages
> >> >and will try to reconnect to the adapters shortly. (The exception
> >caught
> >> >was weblogic.jms.bridge.internal.MessagingBridgeException.)>
> >> >>
> >> >> Any suggestions or comments will be really appreciated.
> >> >>
> >> >> Thanks
> >> >> Suresh
> >> >
> >
-
Network Load Balancing between SharePoint 2013 App server and WFE
Hi,
Can we do NLB between SharePoint 2013 App server and WFE Server ?
Below is our Architecture,
1. WFE Server (1)
2. APP Server (1)
3. Database Server
4. Domain Controller
We have configured NLB but, when we stop IIS on APP server, SharePoint 2013 web app link is not working.
is it possible ?
Please help usYou can do NLB between WFE and APP server however make sure that web application service is started from central admin which host sharepoint sites.
Why do you stop IIS on APP server, definitely it will not be able to host web app sites. rather you can just disable APP node on NLB to test it.
Maybe you are looking for
-
Does VMIC driver support LV RT8.2?
Hello, Using VMIC-5565 instrument driver for LV, I am trying to setup reflective memory VMIC-5565 on LV RT 8.2. My problem is how to setup VMIC-5565 on RT and it is not detected on MAX. First, after installed the driver which is provided from GE FANU
-
1. i have Class a, this has static main 2. i have Class Conn, this connects the DB 3. i have Class Men, has Methods 4. i Create in Class Conn a Vector from Class Men. 5. main is static. i call Conn in main. 6. java doesnt allow me to call Conn from m
-
Discoverer 11g generates weird queries with fields of date dastatype
Hi, We recently installed Discoverer 11g and found out that it always adds "+0" expression to all fields of date datatype in SQL in reports. For example: SELECT ( O100186.END_DATE+( ( 0 ) ) ), O100186.INSTITUTIONID, O100186.INSTITUTIONNAME FROM INSTI
-
SAN based restoration or RMAN restoration for Active Dataguard
Hi , We have oracle 11gr2 on aix OS ,I am planning to configure active dataguard for DB size 250 GB. FOr DB restoration on standby side if i go for SAN based OS block level Relication between primary and standby how to link DB LUn on standby which
-
Software Update No Longer Functioning
Hello, Software Update suddenly stopped working properly for me. For any update I try, the mechanism finds the appropriate updates and performs the download but then reports an installation error, always with the message: "The update <given update> c