Showing master data value in report for which no record in Infoprovider

Hi,
We have the following reporting requirement. The master data values , e.g. 0Customer should appear in the report for which no sales has taken place, i.e no record in Infocube.
We have defined a multicube using Infoprovider & 0Customer Infoobject, but the report seems to show only values from InfoCube, not the values which are not there in infoprovider but are present in infoobject.
Please suggest.
Thanks & Regards
Madhu
00919830957798

Madhu,
There is a how to paper on how to do this. It available in the BW InfoIndex under Multiproviders and is called Slow Moving Inventory Scenario.
https://service.sap.com/~sapidb/011000358700008387152002
This document details out the process of reporting on master data values for which no transactions ahve been recorded. This is achieved by creating a MultiProvider on a Cube and InfoObject and then using teh record count property.
Cheers
Aneesh

Similar Messages

  • Hierarchy node Variable: F4 Help - Not showing Master data values

    Hi,
    We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
    In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
    I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
    Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
    There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
    Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
    Thanks in advance for your help.
    Regards,
    Femmie.

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • Show master data attribute time dependent for pervious period

    hi
    I would to know how  get in report values of pervious period of attribute which is time dependent
    (like person)

    Hi,
    refer below threads might be helpful
    [http://help.sap.com/saphelp_nw04/helpdata/en/13/c3e7379899d06fe10000009b38f8cf/content.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/80/1a634be07211d2acb80000e829fbfe/content.htm]
    Thanks

  • Showing all Characteristic values from Master Data in WebI report

    I want to show master data when there is no data in Cube, I have created constant variable with 1 value in Bex and I am using that in the crystal report but it's still not showing master data. Can anybody help me on this.
    Thanks,
    Ravi

    Hi Ingo,
    Thanks for your quick reply, I have created formula with constant value 1. Do I need to put that formula in rows or columns or as Free Char?
    Thanks,
    Ravi

  • Check on Master Data Value (User Manual Input)

    Hi all,
    i have the following situation:
    User has to insert a set of Characteristic Value (these are not limited in level for any value nor variable) to be able to enter layout and does manual planning, with my great astonishment i have noticed that BPS does not do any check on the master data value inserted by the user, for example if user insert value '1' for 0payscalety CH instead of '01' the system does not give any error message and goes directly to perforate the Master Data with this wrong value.
    Does exist any setting/tip to avoid this unpleasant situation?
    Many thanks in advance
    Fabio

    Hello Fabio,
    personal I would not set up a data model, which makes differences between 01 and 1. It is known that this will make always problems in the future.
    I believe it is quite more unpleasant that SAP does not provide detailed documentation...
    You can use e. g.
    - conversion routine in BW char.
    - message, fox
    - char. rel. and / or ABAP
    - drop down list which does not allow manual input
    to manipulate before / after input. These are some of those possibilities, which SAP provides.
    regards
    Eckhard
    Message was edited by: Eckhard Lewin
    Message was edited by: Eckhard Lewin
    Message was edited by: Eckhard Lewin

  • Master Data Services Add-in for Excel Issue

    I am trying to configure MDS in the Production server. I am running into isssues.
    (I was able to do the whole process successfuly in my local system - Versions are same in the local and server - Only difference is local machine is windows 7 server is Windows 2008 R2)
    I have installed SQL server 2012 Enterprise Version SP1. I am able to browse the MDS URL. User has got full permissions. When I try to access the MDS via Excel I get the below error.
    Can any one help me please I have spent days on this withou any joy.
    Error message
    TITLE: Master Data Services Add-in for Excel
    An error occurred while receiving the HTTP response to
    http://MYIPADDRESS/mds/service/service.svc/bhb. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See
    server logs for more details.
    ADDITIONAL INFORMATION:
    The underlying connection was closed: An unexpected error occurred on a receive. (System)
    Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
    An existing connection was forcibly closed by the remote host (System)
    BUTTONS:
    OK
    Bn

    I have finally found a solution for this problem!  Every time I opened Excel (unless I ran as administrator) I would have to activate the MDS add-in; this was time-consuming and annoying. It seems like there was no solution posted online anywhere! Well
    after much aggravation, I have finally found a solution:
    Fixing the Microsoft MDS Excel Add-In so it Stays Enabled
    Press the Start button (Windows button)
    In the search bar type “REGEDIT”
    Open regedit.exe
    A pop-up will ask permission for the Registry Editor to make changes to the computer, select Yes.
    In the Registry Editor expand HKEY_CURRENT_USER
    In the HKEY_CURRENT_USER folder, expand in the following order:  Software -> Microsoft -> Office -> Excel -> Addins
        Select Microsoft.MasterDataServices.ExcelAddIn
    Double-click on LoadBehavior in the right panel
        In the Edit Value popup, change the value to 
    Press OK
    Exit the Registry Editor
    The excel add-in should now be active anytime you open Excel. If multiple errors occur while using the add-in, the Load Behavior may change back to 0.  If that occurs simply follow these steps so the add-in will be active when Excel starts up.
    I hope this helps some of you avoid the long hours of trying to find a solution to this silly problem.
    Cheers!
    Tony

  • Read document attached to master data value

    Hello.
    I'm using FM RSOD_DOC_MAST_CHANGE to attach files to master data values. But I don't know how to read attached document((  Does anybody know?

    Hi.
    Take a look at [following thread|Document read functionality;.
    Regards.

  • Report for freight condition records

    Dear Freinds
    In my transportation module project, requirement is report for freight condition records.
    We have been created two tables in one access sequence, two tables are: 1. route/ship-to-party 2. route
    They maintained more condition records. They want to see all vondition records in one single report.
    Report based on those two tables. But those two tables are storing in KOMG Structure.
    But price is storing in KONP table. How to fetch both in to repor.
    With regards
    Lakki

    Let us say the condition tables are 001 and 002
    Now you need to go to database tables A001 and A002 in SE16
    Give the name of your condition type for which you want to get all the condition records
    Execute now.
    Now you will get all the condition records for the condition type created for the table say A001
    Hope this solves your problem. You can reward if this helps.

  • Create a Formatted report for a single record

    I am trying to create a report for a single record in a document format instead of row and column format
    For example to list a custome information with list of orders.
    CustomerID ---------------------        Name ------------------------------------
    Address 1 ----------------------         Address 2 ------------------------------
    City --------------------------------        State -------------------------------------
    Zip ---------------------------------
    Order List
    Order 1            Qty          Total Cost
    Order 2            Qty          Total Cost
    We dont have crystal reports setup yet.  I am trying to use report designer...but it is not allowing me to do it.  It creates different group for each row in the query.   Can any one suggest how to do it using report designer or another way in BI 7.0 to create this kind of document.   I want to be able to print this document as pdf or other types.
    Any help is greatly appreciated..
    Thanks

    you can do this both in a formatted report or bex, depending on what kind of an outcome that you are looking for.
    basically, you are first going to present the data in a tabular format and then move the cells around, so the next time you execute the report (analyzer or report designer) it will stay in that format.
    if you are doing it in report designer, first create a query that pulls all required data points and gives them to you in an output as a table.  Then, add that query as a data provider for the formatted report, and you can create additional cells and move the key figures around.  Report designer is a little crude for formatting, but it works
    if you are doing this in BEx Analyzer, then you can do the same thing: create a query and then use the BExGetData formula to pull the required data into required cells
    if you are looking for HIGHLY formatted report (for example you want the output to come out on forms, etc), then you would need to use the Crystal Reports.
    Regardless of what you use for the presentation of the data, the data generation is controlled by the Query itself.  This is one of the tools that SAP is not planning to take away: all the future presentation options will use the query as the data source.
    good luck

  • Report for which data is zero

    HI I have a report which show measures for different quarters.
    1) for those quarters for which the measure value is zero is not shown in the report
    2) I want those quarters to be printed with zero in report
    Kindly help me thanks

    In that only 5 country has entry in fact tableYou need to use what i said in the above post(using case function).....if not,what dimension tables are you joining this fact to in BMM layer place a outer join condition so that even the final record also will fetch you result.
    By,
    KK

  • Problem in Fetching value from Employee Master Date in Crystal Report

    Hi All,
    I am using the SAP Standard report for Sales Quotation and now my client needs a new requirement.
    That is, for certain sales employee they need a manger and the manager name, email, mobile no from employee master data should be fetched.
    I tried this way,
    Assigned the Manager name in the OSLP, memo field and tried to equate the employee name in the OHEM table by using a parameter and tried to fetch the fields but i am not able to view any of the fields from the OHEM table.
    How to fetch the fields from the OHEM table?
    Help me solving this issue.
    Regards,
    Jananisuba S

    hi.
    Janani..
    Fetching means what .
    i am not able to understood...
    linking you are not able to understood or any other.
    in crystal report are u getting the problem.
    First in sql it slef are u able to get the problem..what just explain...

  • Which Master data Source is available for the field VBUK-GBSTK (Doc Status)

    Hi
    Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
    Please help me.
    Thanks
    Mannev.

    Hi
    Thanks for your reply.
    That is Transaction data source. I want master data source.
    Thanks,
    Mannev.

  • LIST OF STOCK  VALUES  BALACE REPORTS FOR DATE WISE

    Dear friends,
    In MB5L T.Code we can get period wise balance reports,but client's requirement is date wise Balance report,could you help me any kind of standard reports for date wise.
    Regards,
    Sabhapathy  R

    Dear Vishal,
    Thanks for your reply,mb5b only stock and  documents number  we can get client want to mb5l with date specific balance reports with GL account's.
    Regards,
    Sabhapathy R

  • Show Previous Balance value in Report.

    Hi,
    I'm using Crystal Reports with Visual Studio 2010. I'm generating a report which shows columns Debit and Credit and SUM values on the buttom of each column. The report is filtered using a date range, which I specify in my connection via C# code (below).
                string sqlString = "";
                sqlString = "SELECT * FROM Ledger WHERE ([Payment Date] >= #" + FromDate + "#) AND ([Payment Date] <= #" + ToDate + "#)";
    Now I need a "Previous Balance" value, which would be the SUM of Credit and Debit columns, which are prior to "Payment Date".  How do I accomplish this?  I've attached a sample of the report I'm looking for. Please be specific with your reply, because I'm new to Crystal Reports.
    Thank you so much for your help.
    Aron

    Hi Aron,
    Crystal is database agnostic, meaning it will run a report against any database.  If you create a report using AS/400 it's possible to use that same report against an Oracle or SQL Server database as long as the recordset Crystal is expecting is the same.
    So having a report run from a Stored Procedure will work on different databases as long as the metadata for the Stored Procedures between the databases match.
    For the subreport, when  you drop the subreport into the Group Footer.  Right-click on the subreport and you have the option to Link Subreport.  You can select the OwnerID from the main report and link it to the OwnerID in the subreport.
    Your c# suggestion may be going the long way around the barn.  If you link the subreport in your Group Footer 1, you should be able to get the Previous Balance for that OwnerID.  When you link the subreport, it creates a Record Selection Formula in the subreport that should return only the records for that OwnerID.
    Once you have the subreport linked, edit the subreport and go to Report | Selection Formula | Edit Record Selection Formula.  You'll see what the linking created.  You can now edit that formula to include your date range that is outside the current period.
    Hope this helps,
    Brian

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

Maybe you are looking for