Since the 4.0.1 update the first Firefox window I open refuses to open tabs, only new windows, and all refuse to show my bookmarks toolbar. All Sync settings and account seem lost.

Since the update the first Firefox window I open refuses to open tabs, only new windows, and all refuse to show my bookmarks toolbar. All Sync settings and account seem lost.

G'day again, I've also lost the option of a 'Stop loading' or 'Refresh' button.

Similar Messages

  • Since the Version 20.0 update when starting firefox I have frequently got the error message "firefox is having trouble your windows and tabs" .

    Since the version 20.0 update when starting firefox I have frequently got the error message "firefox is having trouble recovering your windows and tabs" This has not occurred with previous versions. If I click on the box "restore" and close firefox the problem reoccurs if I click close I lose the bookmark sidebar. I am so sick and tired of these frequent and buggy updates (every one since 17.0 have caused norton 360 to stop detecting tracking cookies for several weeks and or broken the norton toolbar) that I will uninstall firefox and switch to another browser if this does not change.

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website.
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • When i go to the app store to update the one app that needs to be updated, the screen is blank.  It used to list all the apps that need updating and have a button called update all.  Now nothing.  Just a blank screen.

    when i go to the app store to update the one app that needs to be updated, the screen is blank.  It used to list all the apps that need updating and have a button called update all.  Now nothing.  Just a blank screen.  How can I fix this?

    There's been a problem with this all day.  Seems to be a server problem  -  wait a day and try again, or use itunes on the computer to update, that works.

  • I see there is another ios update. I have an iPhone 4S. The last time I updated the ios I lost all my contacts, as I had not been using the iCloud as a backup. I am now apprehensive about the latest update. How can I determine if contacts are backed up?

    I see there is another ios update. I have an iPhone 4S. The last time I updated the ios I lost all my contacts, as I had not been using the iCloud as a backup. I am now apprehensive about the latest update. How can I determine if contacts are backed up?

    You should never lose contacts under any circumstances.
    Although contacts are included with the iPhone's backup, contacts are designed to be synced with a supported address book app on your computer where such important data should be available with or without an iPhone or any cell phone. Not a good idea to depend on a cell phone for such important data which can be lost or stolen or damaged beyond repair.
    In addition, there are a number of free email accounts that support syncing contacts over the air including an iCloud account, Gmail, Yahoo, and Hotmail.
    If you are not syncing contacts over the air with an iCloud account and not backing up your iPhone wirelessly with your iCloud account, your iPhone's backup is being updated by iTunes on your computer which is updated as the first step during the iTunes sync process.
    With Windoze, contacts can be synced with Outlook 2003, 2007, or 2010 along with syncing calendar events, notes, and reminders, or with the address book app used by Outlook Express and by Windows Mail called Windows Contacts for syncing contacts only. With a Mac, contacts can be synced with the Address Book app. This is selected under the Info tab for your iPhone sync preferences with iTunes.
    If the supported address book app on your computer is not used and has no contacts available, before the first sync for this data enter one contact in the supported address book app on your computer. This will provide a merge prompt with the first sync for this data, which you want to select.

  • I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts, is it only from my device or the updated software should be adjusted?

    I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts anymore(the button edit doesn't exist anymore), is it only from my device or the updated software should be adjusted?

    That's exactly right.  And since you have a MacBook Air (as I do), that means the synching should occur just fine (if you've set it up right in iTunes).  In other words, once you actually do the update, the iTunes on your MacBook Air will re-sync your photos back to your iPhone.
    Basically, the process is that your iPhone gets backed up, wiped clean, then the new iOS version gets installed, then the backup gets restored.  That will restore everything in the article above, which does not include your photos.  But the sync process that happens after the iOS installation would restore your photos from iPhoto given you've set it up that way in iTunes.
    When you have your iPhone plugged into iTunes, while looking at the iPhone's summary page, click "Photos" on the right side of iTunes to see how you have your sync set up.
    Regardless, it sounds like you'll be fine!  Your photos will wind up in iPhoto once you place them there.  They will be safe there.

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • I recently updated to version 5.0, however, when I open up a link in a new window, there is no address in the new window's address bar, just a blank box.

    I recently updated to version 5.0, however, when I open up a link in a new window, there is no address in the new window's address bar, just a blank box.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How to make the document dirty after updating the links?

    Hi,
    I am using the below code to update the link resources by providing new URI. The link resources are getting updated, but the document is not becoming dirty.
                    InterfacePtr<ICommand> updateCmd(CmdUtils::CreateCommand(kLinkResourceStateUpdateCmdBoss));
                    InterfacePtr<ILinkResourceStateUpdateCmdData> updateCmdData(updateCmd, UseDefaultIID());
                    updateCmdData->SetResource(ref.GetUID());
                    updateCmdData->SetDatabase(ref.GetDataBase());
                    updateCmdData->SetNotify(true);
                    updateCmdData->SetUpdateAction(ILinkResourceStateUpdateCmdData::kUpdateURI);
                    updateCmdData->SetURI(newURI);
                    updateCmd->SetUndoability(ICommand::kRegularUndo);
                    CmdUtils::ProcessCommand(updateCmd);
    How do I make the document dirty after updating the resources?
    Thanks,

    Thanks. It is working fine.
    I called PreDirty(docPtr), before updating the links.

  • Do I have to uninstall the CS4 software before updating the NVIDIA driver and reinstall CS4 after?

    I have just installed CS4 on Windows 7 and I get the message that I need to update NVIDIA driver.
    Is it really neccassary to update driver even if I have no problems using Photoshop?
    Do I have to uninstall the CS4 software before updating the NVIDIA  driver and reinstall CS4 afterwards or is there a way around it?
    Here are the technical details:
    Processor speed: 3325 MHz
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GT 220/PCI/SSE2
    OpenGL Drawing: Enabled.
    Video Card: NVIDIA GeForce GT 220
    Video Mode: 1680 x 1050 x 4294967296 colors
    Video Card Driver: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
    Driver Version: 8.15.11.8627
    Built-in memory: 3063 MB
    Free memory: 1981 MB
    Memory available to Photoshop: 1643 MB
    Memory used by Photoshop: 60 %
    Image cache levels: 4

    I have never had to reinstall any program for a video driver.
    Now, check out the instructions for your particular nVidia driver, and the exact steps can differ. Just did my Quadro FX-4500 and it was just an install over the older driver. However, looking at another nVidia card's driver, and there were 3-4 settings in the nVidia console, that had to be reset BEFORE installing that driver. Did not affect me, but would have been a different operation for the next guy, with a different nVidia card. nVidia makes it easy with the necessary instructions - follow those to the letter, or issues can arise and the entire driver can get hosed. Things could be a simple as download, and execute, to having to do several things before you execute.
    Good luck,
    Hunt

  • No major shortcomings keyboard arrow key. even if the text part of the message you clicked the arrow keys to update the screen would be great. with an update on my idea, and so it would be more useful

    no major shortcomings keyboard arrow key. even if the text part of the message you clicked the arrow keys to update the screen would be great. with an update on my idea, and so it would be more useful

    greghcrash wrote:
    It Would be great to have keys on the onscreen keyboard.
    Such as a computer keyboard.
    With BACKSPACE, TAB WITH SETTINGS, DELETE, TYPE OF TYPE, BOLD TYPE, UNDERLINE ETC....
    I HAVE A KEYBOARD COVER AND IF I NEED TO USE CERTAIN KEYS I HAVE TO SWITCH TO MY KEYBOARD CASE AND THAT IS VERY INCONVENIENT.
    IT IS ALSO A TIME WASTER.
    When you installed iOS 8 did you read about the new features? Applications can create custom keyboards…
    http://www.imore.com/custom-keyboards-ios-8-explained
    You need to look for an app that has a custom keyboard with the features you require, I suggest you find one without CAPSLOCK
    greghcrash wrote:
    IT IS ALSO AGGRAVATING WHEN TYPING AND IT AUTOMATICALLY CHANGES THE WORDS THAT YOU WANT TO USE.
    THANK YOU FOR YOUR TIME
    Again you need to look at how to manage the device - these settings can be turned off already & you can edit the 'suggestions' too.
    Settings > General > Keyboards > turn Auto-Correction Off.
    Sadly you cannot disable autocorrect temporarily, so it's all or nothing.

  • Why after the last Photoshop CC Update the Lasso Tool not more have the Backspace step backward -Fun

    Why after the last Photoshop CC Update the Lasso -Tools not more have the Backspace-last-point-step-backward -Funktion?? This is terrible!!
    So i can not work more. Please change immediately with a next update!! Please..

    Good day!
    This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
    Also I can not reproduce the issue you claim to have with 14.2 on Mac OS 10.8.5.
    What is your OS?
    Regards,
    Pfaffenbichler

  • After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

    After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

    I have this exact same issue!
    I was on 2.0.1 running fine until late last week, noticed emails would not show up unless I had opened them in outlook. I thought I ran into a bug so I upgraded to 2.0.2. Now I can sync my email if outlook had them opened previously, but no calendar or contacts at all. I don't think my exchange admins will move me to another server, any other ideas?
    I love my iphone but if these features don't work I can't use it. I would appreciate any ideas.

  • What is the best way to update the delivery time?

    Hi All,
    One of the tasks I have in my job is to updste purchase orders with information found in the orderconfirmation we receive. In the order screen, ME22N, you can change the date in the item, where you have all positions listed. But you can also change it in the tab classifications.
    What is the best way to update the delivery time?
    Best Regards
    Praveen

    Hi
    It may userfull to you
    If you change the delivery date after you have send the PO, then the statistical delivery date is still containing the old delivery date., as long the order is not send this date is changed together with the delivery date.
    Vendor evaluation is performed based on statistical delivery date.
    So if you are responsible for a date change, then you change both dates, that the vendor does not get bad points. but if the vendor cannot deliver at the wished dates, then you change the delivery date only, that all people in your company and MRP run can rely on the new delivery date, but your vendor is evaluated against the old date, because of his fault.
    regards
    Madhu

  • Firefox crashing when i wanna open or close a tab or a window, also while wanna open any page, now what to do for solving the problem?

    Firefox crashing when i wanna open or close a tab or a window, also while wanna open any page, now what to do for solving the problem?

    Disable McAfee siteadvisor and check the problem still persist or not?

Maybe you are looking for