Slow Moving Stock Report

Hi All,
May i know the T-Code to list Slow Moving, Fast Moving materials & also for ageing of materials.
Regards
Rang

Hi Rang,
MC50 looks at the stock level for a material over a period of time and
identifies the lowest level that the material reached. That lowest level is
the dead stock quantity as, in theory, that stock was not required. It
works on the principle that in an ideal world scenario you would maintain
zero stock sitting in the warehouse because you were able to plan such that
every day you receive / produce the exact amount that you require to meet
all customer requirements with no surplus. An example would be that if you
met all demand over a 3 month period and the stock level in that time never
dropped below 500 then that would be the dead stock level as throughout the
period you supposedly could have had 500 less stock and still met all
requirements.
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock.
Both the reports have value in that they can highlight problems which need
addressing - such as excessive stock or unpopular lines - but the results
they provide do need to be considered with a degree of caution...
Top-of-head examples could be that zero dead stock in MC50 is not an
achievable target if there is daily demand and the warehouse works on a FIFO
basis with a 2 day minimum to receive and then pick, and in MC46 materials
that are very seasonal will obviously show unfavourably at other times of
the year.
Hope its useful
reward points if deserved
Cheers!!!
Twinkle

Similar Messages

  • Slow moving items report for project stock

    Hi ALL,
    We are using project stock to manage all of our inventory. As the standard slow moving items report (MC46) does not contain project stock (special stock Q), we would like to develop a report then. "Slow moving" should be identified by material, plant, storage location and WBS.
    Has any had this experience? What's the main data logic for this report?
    Thanks a lot!!

    Dear,
    Do One thing.. First goto MB5B - stocks on posting date and select to display only special stock indicator Q (Project). By this you can abstract all Project materials. Save the output into Excel. (The main aim is first abstract the project stock materials into a list with a suitable transactions - MB5B or MB52).
    Then run MC50 or MC46 using these materials saved in excel file.
    Try this.
    Regards,
    Syed Hussain.

  • Report on  Dead stock and Slow moving stock

    Hi ,
    On of my cleints requirement is to see the list of Dead stock and slow moving stock
    I tried T.COde Mc50 and MC46 but I could not understand the report fully 
    In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
    How does system identify an item as dead stock.
    Is there any setting to define an item as dead stock before running report MC50?
    In case of slow moving stock ,i want to see all the material for which no posting
    happened for 60 days.In this case what value I need to select in T.Code MC46
    Thx in advance 
    Deva

    Hi,
    While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
    And execute with the other selection parameters.
    Regards,
    DilliB

  • Slow moving stock

    Hi Guys,
    I am wondering if there is any standard report or a table in SAP to look for 'Slow moving stock' ? I am trying to find out the usage/consumption of particular materials or when they are last moved?
    Thanks for your suggestions,
    Regards,
    Kelly

    Hi Kelly,
    Please check MC46 slow moving items & MC.A (you can choose 'last goods issue' / 'last goods movement' fields from layout).
    But there are several other stock reports. (e.g. MC50 dead stock)
    BR
    Csaba

  • Slow moving item report-BW

    Hi guys,
                Regards.We got a requirement:
    1).The user inputs the "No. of Days since consumed" and the Customer exit code would calculate the "Result Variable from Current Date" and populate "SLOWMOVDATE".
    2).We want the Stockvalue against that "SLOWMOVDATE".
    But the system calculates the "SLOWMOVDATE" but am unable to get the stock value against that Particular date..Guys any idea on how i can go about it??(Its a Slow Moving Item report in BW)
    Manythanks
    Arun

    I suppose the stock value is restricted KF i.e. it is restricted by "SLOWMOVDATE' or you have set a global filter in the query on "SLOWMOVDATE".

  • Non-Moving /Slow Moving stocks

    Hi
    Is any Standard Oracle Report available which give
    us the Sub_inventory wise/Item wise stock which are
    not moved (i.e. No transactions are happening since a
    given date).
    I hv check the Inactive Item Report available in
    Inventory. What is exactly this report ?
    Can anybody help us.
    Regards.
    Navdeep

    hi,
    The reports gives you an idea abt which stock is not used from many days or which is not even used or had no movements for the same...When you see the report you can give the periods in between which the system evaluates the materials movements...if the material has no movement in the given period it is called dead stock...and if the material is consumed out of it for given period then it is called slow moving stock..
    Pls check both the reports carefully...
    Check MC46 - slow moving items
    MC50  - Dead stock(You can say dead stock as non moving stock )
    If there is no selection shown by the system then it means that all the material/stock is used properly on time and is consumed properly...
    Regards
    Priyanka.P
    Edited by: Priyanka Paltanwale on Dec 2, 2008 7:27 AM

  • Non-moving stock report

    Dear BW Gurus,
                            My client needs a "Non-moving stock report".I went thro the help.sap.com and just found one query for "Slow moving items" which is designed upon the Multiprovider 0IC_MP04.I just want to know whether i can use the above query for the Non-moving stock???
    2)0IC_MP04 Multiprovider obtains data only from 0IC_C03 cube,so whats the real reason behind using a multiprovider rather than just 0IC_C03..????
    Would appreciate ur help on this...
    manythanks
    arun

    Hi Arun,
    In R/3, you can go to MC50 transaction to see the non -moving stock report.
    Also check MC46 & MC.9
    I m not sure about the BW Business content report for non-moving stock.
    What you can do is, see the satandard R/3 report and create report on IC_C03.
    Cheers
    Praveen

  • Sample code for slow moving material report?

    Hi all,
    I have a requirement to display slow moving mateial report on a particular goods issue date and material wise.
    The basic requirements are
    1. Movement type '261'  and material, plant are select-options.
    2.last goods movement date based on  parameter.
    3. Display the quantity available
    but here i am getting a problem that i couldn't find the last goods movement for that particular material with specific storage location as one material document containing more than one item. So please help? Also what logic i have to use to display quantity available?
    Please specify the sample code or logic for above requirement?
    Any custom slow moving report codes also very helpful?
    Thanks,
    Vamshi

    >
    VAMSHI KRISHNA wrote:
    > Solved.
    ....Shaved.

  • BW Slow moving item report in MC46 (R3) Format

    Dear Guys,
                    Regards.We got a requirement :
    1) A Slow moving Item report in BW in MC46 Report format(R3).Especially the client wants the "Period:Last Consumption(Days)" in the input selection criteria.The Standard BW Slow Moving item report has only Mat.Grp in the input selection and Caldays(Period from-to) in the Filter.Would appreciate your timely help on this...
    Manythanks
    Arun

    Hi Ramesh/Prasad,
                               Many thanks for your replies..Well i dont want the input selection for "CALDAY" but rather for "DAYS-----Like user input as 100Days,60Days...."...They want to get the display of "Slow moving materials" for the Last 100 days or so...Any take on this?
    Manythanks
    Arun

  • Dead stock  or slow moving items reports

    tell me any standard report t.code  for dead stock or slow moving item..?
    actually in our system  mc50 is not working...in selection field it pick only one material ..not by material  group so how i  can get the dead stock report?
    Regards
    Rekha sharma

    pls tell me the input selection field for mc46...
    scope of ranking list
    no. of days up to last consumption from--to--
    actually i fill up 180 days for perios last consumption ...in period to analyze selection field.
    regards
    Rekha sharma

  • Queries to extract slow moving stock

    Hi All,
    I have the following queries to extract the item list.  May I know how to modify this queries to filter slow moving item where Purchase date are over 90 days older than today date.  Example, today is 01/05/15 the report will list only item where purchase date are older than 01/02/15.
    SELECT T0.[ItemCode], T1.[ItmsGrpNam], T0.[ItemName], T0.[LastPurDat], T0.[OnHand], T0.[BuyUnitMsr] as 'uom', T0.[LastPurPrc], T0.[OnHand]*T0.[LastPurPrc] as 'Est Stock Value'
    FROM [dbo].[OITM]  T0 INNER JOIN [dbo].[OITB]  T1 ON T0.[ItmsGrpCod] = T1.[ItmsGrpCod]
    WHERE T0.[OnHand] >0 AND  T1.ItmsGrpNam <> 'SP001-Spare Parts'
    Thank you,
    Annie

    Hi,
    Try this query:
    SELECT T0.[ItemCode], T1.[ItmsGrpNam], T0.[ItemName], T0.[LastPurDat], T0.[OnHand], T0.[BuyUnitMsr] as 'uom', T0.[LastPurPrc], T0.[OnHand]*T0.[LastPurPrc] as 'Est Stock Value'
    FROM [dbo].[OITM]  T0 INNER JOIN [dbo].[OITB]  T1 ON T0.[ItmsGrpCod] = T1.[ItmsGrpCod]
    WHERE T0.[OnHand] >0 AND  T1.ItmsGrpNam <> 'SP001-Spare Parts' and datediff(day, T0.[LastPurDat],getdate()) > 90
    Thanks.

  • Slow moving items report

    hey
    there is a standard query for Slow moving items based on 0IC_MC01. I need to find out the last goods issue and last goods receipt date on this query.
    Any one has any ideas ?
    thanks
    Laura.

    Hi Laura
    There is a standard query for slow moving items based Multi Provider 0IC_MC01
    and query is : Query 0IC_MC01_Q0001 is available as of 3.0B (role: SAP_BW_0ROLE_0003).
    But if you get some msg: Redesign Slow Moving Inventory
    then do this following
    Please change the definition of the MultiProvider 0IC_MC01 and the underlying Query 0IC_MC01_Q0001. These changes are included with SAP BW
    1. Administrator Workbench
       -> Change definition of 0IC_MC01
          -> Activate navigational attributes
             0MATERIAL__0DIVISION
             0MATERIAL__0MATL_CAT
             0MATERIAL__0MATL_GROUP
             0MATERIAL__0MATL_TYPE
          -> Identification
             mark ALL displayed characteristics/navigational attributes
        -> Save, check and activate 0IC_MC01
    2. BeX Analyzer
       -> Change definition of 0IC_MC01_Q0001
          -> remove characteristic 0CALMONTH (free characteristics)
          -> add characterstics 0MATL_GROUP (rows) and restrict it to
             variable 0S_MATG
          -> remove calculated key figure 0IC_MC01_CK0003 (columns)
          -> add new selection "All materials" accordingly to
             example "All customers" (columns)
             - use InfoProvider 0MATERIAL instead of 0CUSTOMER
             - supress this structural element in the properties
          -> add key figures 0ISSVS_VAL and 0RECVS_VAL (columns)
       -> Save, check and activate 0IC_MC01_Q0001
    The selection "All materials" provides all material numbers that are
    stored in BW. So you can identify materials that have had no movements
    within in the selected period. These materials show no values in key
    figures 0ISSVS_VAL and 0RECVS_VAL.
    For information purposes you can also add other key figures.
    You can also add other characteristics in the drill down for grouping
    purposes, like e.g. 0DIVISION.
    If you want to have similar reports with 0PLANT you can also create
    a similar MultiProvider/Query with 0MAT_PLANT instead of 0MATERIAL.
    Hope you got some idea and help
    Atul

  • Slow Moving Inventory Report

    Hi All,
    I am trying to generate a slow moving inventory query for materials that are not consumed for a certain period of time. I am using SAP B1 2007 A. Kindly share with me the ideas on how to generate the above query.
    Thanks.
    Best Regards,
    xavier

    Hi Xavier,
    You may check these to start:
    Slow moving item list
    FAST, MEDIUM AND SLOW MOVING GOODS ANALYSIS
    Thanks,
    Gordon

  • Slow moving goods report

    Hi Gurus
    Please any one can suggest a report that can handle the following scenario:
    We are in need of a report that will show us the velocity or how quickly or slowly an item is moving in our inventory by bin location(s).
    If there is a lot of inventory turns (turn = number of times inventory has to be replenished) then we should be looking at the min / max and adjust accordingly to arrive at the desired turns.  Alternatively, if the inventory is not turning at all, it should be evaluated to determine if it is surplus or obsolete to our needs and disposed of in a proper manner.
    We have approximately 26,000 stocking items in our warehouse.  The report available to us does not provide bin location nor does it provide turns.
    Thanks & Regards
    Sada

    Try MC46
    Regards

  • Slow-Moving Item Report

    The issue I have has been addressed in oss note(541559) but I am unable to get the solution outlined to work.
    The situation is I would like to show all characteristic values for 0material__PNL that we have a history of transactional data, even if there is not transactional data during the current period or for the current customer the report is filtered for, displaying a blank or a zero when there is no data.  I just want the list of PNLs to be consistent over different runnings of the report regardless of whether or not there is a transaction.

    Hi JSG,
    well, if I understand your requirement correctly you want to show lines in a query that do not exist in the cube. Normally this can be done by creating a multicube on the cube and the infoobject (ofcourse the infoobject has to be activated as infoprovider too) and running a query against this multiprovider.
    Hope this helps
    regards
    Siggi

Maybe you are looking for