Report on Dead stock and Slow moving stock

Hi ,
On of my cleints requirement is to see the list of Dead stock and slow moving stock
I tried T.COde Mc50 and MC46 but I could not understand the report fully
In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
How does system identify an item as dead stock.
Is there any setting to define an item as dead stock before running report MC50?
In case of slow moving stock ,i want to see all the material for which no posting
happened for 60 days.In this case what value I need to select in T.Code MC46
Thx in advance
Deva

Hi,
While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
And execute with the other selection parameters.
Regards,
DilliB

Similar Messages

Dead stock and slow moving material

Hello,
I need to find out how to get dead stock and slow moving materail manually from tables.(instead of using MC46, & MC50).
Could you please tell me the logic and tables needed to retrieve this data.
regards
Gaurav Maini

use table mseg and mver
logic is calculation of frequency of movements
regadsr

Dead stock or slow moving items reports

tell me any standard report t.code for dead stock or slow moving item..?
actually in our system mc50 is not working...in selection field it pick only one material ..not by material group so how i can get the dead stock report?
Regards
Rekha sharma

pls tell me the input selection field for mc46...
scope of ranking list
no. of days up to last consumption from--to--
actually i fill up 180 days for perios last consumption ...in period to analyze selection field.
regards
Rekha sharma

Non-Moving /Slow Moving stocks

Hi
Is any Standard Oracle Report available which give
us the Sub_inventory wise/Item wise stock which are
not moved (i.e. No transactions are happening since a
given date).
I hv check the Inactive Item Report available in
Inventory. What is exactly this report ?
Can anybody help us.
Regards.
Navdeep

hi,
The reports gives you an idea abt which stock is not used from many days or which is not even used or had no movements for the same...When you see the report you can give the periods in between which the system evaluates the materials movements...if the material has no movement in the given period it is called dead stock...and if the material is consumed out of it for given period then it is called slow moving stock..
Pls check both the reports carefully...
Check MC46 - slow moving items
MC50 - Dead stock(You can say dead stock as non moving stock )
If there is no selection shown by the system then it means that all the material/stock is used properly on time and is consumed properly...
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Dec 2, 2008 7:27 AM

Slow moving stock

Hi Guys,
I am wondering if there is any standard report or a table in SAP to look for 'Slow moving stock' ? I am trying to find out the usage/consumption of particular materials or when they are last moved?
Thanks for your suggestions,
Regards,
Kelly

Hi Kelly,
Please check MC46 slow moving items & MC.A (you can choose 'last goods issue' / 'last goods movement' fields from layout).
But there are several other stock reports. (e.g. MC50 dead stock)
BR
Csaba

Report on Rorder Point and a safety stock

Hi,
Pls adivse, by which tcode, i can get a report on Rorder Point and a safety stock for the material.
ie. my client want to have a report abt the material status for reorder stock

Hi,
The safety stock and re-order point are plant specific details
The values can be checked from SE16 - table MARC
regards
Merwyn

Request for help on Vendor Consignment stock and Customer Consignment Stock

HI Experts,
We have a requirement to segregate the Customer Consignment stock and Vendor consignment stock from the total Consignment stock available in the BW report.
Currently in the report the calculation of total consignment stock is based up on Issued consignment stock and Received consignment stock .
The calculations of the Issued and Received consignments stocks are specified below.
Issued consignment Stock
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 100, 101, 104, 105, 106, 110
Application    :   MM
Stock relevance : 1
Adding to the above conditions,
u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock. or
u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock.
Received Consignment Stock :
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 000, 001, 004, 005, 006, 010
Application    :   MM
Stock relevance : 1
Adding to the above conditions,
u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Received Consignment Stock. or
u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Received Consignment Stock
Only stock category and stock type are available in the BW report for determining the type of consignment stock . So, with respect to stock category and stock type, could you please kindly advise if it is possible to determine the Customer consignment stock and Vendor consignment stock in the report
Thanks a lot
Warm Regards,
Jeswanth
Edited by: jeswanth kadali on Jun 23, 2009 4:10 PM

Hi,
We can settle consignment goods to vendor through MRKO transaction.Even user transafers consignment stock to own stock through MB1B transaction.We can use same document to settle vendor through MRKO transaction.
What is implications of such Action (like Goods issue, 1 step transfer) on SAP.
Nothing will happpen after after stock converted to own stock.
Regards,
JS

Safety stock and min safety stock

Dear all,
CAn anybody explain me the functional difference between safety stock and min safety stock?
And what is the meanng of safety time?
Karthick

Hi,
Safety Stock:
The quantity of stock to satisfy high requirements. The purpose of the safety stock is to prevent material shortage.
Safety stock as the name suggest is the stock level till which the dead stock or stock out situation will not arise (probable figure based on past data maintained in master).
As such this figure is not stock, it is cut-off figure maintained in master which is used for Planning and once the stock level dips below this value, you can configure system to generate PR, orders automatically. It has its relevance in MRP and CBP.
Safety stock is not used in production.
Minimum Safety Stock
    The quantity that defines the lower limit for safety stock. This value cannot be exceeded.
    The safety is checked to see if it is greater or equal to this lower limit.
    The lower limit is checked if you use an availability indicator which shows, according to customizing settings, if the safety stock is to be calculated again in a forecast. If the safety stock is lower than this level in forecasting, the safety stock is automatically increased to the value of the lower level.
The safety stock must always be greater or equal to this lower level (minimum safety stock)
Hope this will help help you.
Regards,
Pavan

Blocked stock and GR Block stock

Can anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not....
Please clarify me on this.
Thank you
Shreek

Can anyone please let me know the difference between Blocked stock and GR blocked stock. How to post stock to these both stock type and how valuation matters to those.
GR Blocked stocks means if you have doubt about the stock you can post these stocks to GR Blocked stock with mvt type 103.In this case no accounting documents generated.Once you gets clarified the doubt about stock you can move the stock to your stock with mvt 105.Once you post the document with 105 you can get accounting documents will be generated.
Also for transfer posting from Stock type Blocked Stock to Quality Inspection Stock or Unrestricted-use Stock, whether accounting document will generate or not...
Blocked stock is you are blocked these stocks for other movements This stock you can transfer mvt 343 & 344 blocked to unrestricted or unrestricted to block.In this cas you are moving the stocks with in storage location in single plant so thesre is no accounting generated.only stock status changed..
Hope this will clarifies,
JS

Negitive stock and Non valuated stock

Dear Gurus
please give me over view of my below stock. provide with example and situation.
Negitive stock and Non valuated stock
Best regards
srinivas.

Hi
For Negative stock
http://www.sap-basis-abap.com/mm/how-to-use-negative-stocks-and-its-purpose.htm
For Non Valuated Stock
UNBW (non-valuated materials)
Non-valuated materials are managed on a quantity basis, but not by value.
Check it out
Regards,
Raman

Slow Moving Stock Report

Hi All,
May i know the T-Code to list Slow Moving, Fast Moving materials & also for ageing of materials.
Regards
Rang

Hi Rang,
MC50 looks at the stock level for a material over a period of time and
identifies the lowest level that the material reached. That lowest level is
the dead stock quantity as, in theory, that stock was not required. It
works on the principle that in an ideal world scenario you would maintain
zero stock sitting in the warehouse because you were able to plan such that
every day you receive / produce the exact amount that you require to meet
all customer requirements with no surplus. An example would be that if you
met all demand over a 3 month period and the stock level in that time never
dropped below 500 then that would be the dead stock level as throughout the
period you supposedly could have had 500 less stock and still met all
requirements.
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock.
Both the reports have value in that they can highlight problems which need
addressing - such as excessive stock or unpopular lines - but the results
they provide do need to be considered with a degree of caution...
Top-of-head examples could be that zero dead stock in MC50 is not an
achievable target if there is daily demand and the warehouse works on a FIFO
basis with a 2 day minimum to receive and then pick, and in MC46 materials
that are very seasonal will obviously show unfavourably at other times of
the year.
Hope its useful
reward points if deserved
Cheers!!!
Twinkle

Queries to extract slow moving stock

Hi All,
I have the following queries to extract the item list. May I know how to modify this queries to filter slow moving item where Purchase date are over 90 days older than today date. Example, today is 01/05/15 the report will list only item where purchase date are older than 01/02/15.
SELECT T0.[ItemCode], T1.[ItmsGrpNam], T0.[ItemName], T0.[LastPurDat], T0.[OnHand], T0.[BuyUnitMsr] as 'uom', T0.[LastPurPrc], T0.[OnHand]*T0.[LastPurPrc] as 'Est Stock Value'
FROM [dbo].[OITM] T0 INNER JOIN [dbo].[OITB] T1 ON T0.[ItmsGrpCod] = T1.[ItmsGrpCod]
WHERE T0.[OnHand] >0 AND T1.ItmsGrpNam <> 'SP001-Spare Parts'
Thank you,
Annie

Hi,
Try this query:
SELECT T0.[ItemCode], T1.[ItmsGrpNam], T0.[ItemName], T0.[LastPurDat], T0.[OnHand], T0.[BuyUnitMsr] as 'uom', T0.[LastPurPrc], T0.[OnHand]*T0.[LastPurPrc] as 'Est Stock Value'
FROM [dbo].[OITM] T0 INNER JOIN [dbo].[OITB] T1 ON T0.[ItmsGrpCod] = T1.[ItmsGrpCod]
WHERE T0.[OnHand] >0 AND T1.ItmsGrpNam <> 'SP001-Spare Parts' and datediff(day, T0.[LastPurDat],getdate()) > 90
Thanks.

Tcode MC46 and slow-moving

Hi,
i am new to MC46. I even dont know if it belongs to MM or other modules. Can anyone answer my questions as below:
1) how is "slow-moving" defined in this code? what is its exact meaning? just means no transfer posting, no GR/GI?
2) what is the definition of consumption? does it mean "sell the goods to the custmer"? If it said 10days since consumption, does this mean there is no movement type 601 took place in the past 10days?
3) is there any relationship between this code and mb51?
points will be rewarded for the help. THanks!!

Hi,
Basically MC46 transaction is for finding out the Slow Moving Items. I.e. materials which haven't consumed from inventory in the specified period.
When we say "consumed", the mvt types that the system would consider are 201, 261, 301, 351, 543, 601, 631 and the related mvt types. It will not consider the postings with special stock E (sale order stock).
If there is no consumption posting for a material within the specified period (ex: 40 days), then the system will display the material master creation date for that material. Otherwise it will show the last posting date of any of the above movement types for that particular material.
From the last movement date , we can do a statistical analysis on the material being in inventory for a long period.
Hope this would clarify your query.
Regards,
garun
Message was edited by:
ARUNACHALAM G

Sales order stock and storage location stock on past date with value

Hi everyone.
I m looking for a report which can give sales order stock with value as it is shown in mb5b and storage location stock with value as in mc.5 is there any report which can give the combination of both the things on past date with values.

can you tell me what shall be the fields and table for special stock on past date with value and sloc stock on past date with value

Diff between valuated stock and storage loc stock

Dear guys,
What is difference between valuated stock and starage loc/ batch stock?
Regards
Jay

Hi,
the stock which shown at MMBE at storage location level /batch is valuated stock.In order to identify the differrance , the stock which is taken in will be with stock types likes unrestricted,quality etc.If batch management is active for the material , material willbe procured in batches and will be kept in storage location, with differrant stock types.Stock types may also be like sale order stock etc.If the material is procured against a account assignment , the value of the stock will be costed against theaccount assignment.
The qty multiplied with the price is the value of the material and this valuated stock will be stored in the storage location under a batch if batch management is active.
Again valuation can be at company code level or plant level.
Also non valuated and non stock materials also in existsance which will be depend upon the material type and will be procured against a account assignment.
Regards,

Report on Dead stock and Slow moving stock

Similar Messages

Maybe you are looking for