Small problem in table move

The base table was created in a DMT and all the partitions were created in LMT.
Now i want the table also to be in LMT.
When attempted a move with alter table tablename move tablespace it's giving an error.
SQL> ALTER TABLE HOLDINGDBO.POSITION_STAGE MOVE TABLESPACE HOLDING_GEN;
ALTER TABLE HOLDINGDBO.POSITION_STAGE MOVE TABLESPACE HOLDING_GEN
ERROR at line 1:
ORA-14511: cannot perform operation on a partitioned object.

ORA-14511: cannot perform operation on a partitioned object.Of course it can't. The move clause targets a segment. Alas, the top level object (table) here, does not have any segment. Hence you can't move a partitionned table as a whole.
Instead just look at the alter table move partition statement in TFM.
e.g.:ALTER TABLE HOLDINGDBO.POSITION_STAGE MOVE PARTITION POS_OLD TABLESPACE HOLDING_PTS_OLD;Regards,
Yoann.

Similar Messages

Problem with DB6CONV online table move

Hello,
I tried to schedule a few concurrent online table move using DB6CONV (version 4.08, on NW07 SP17, DB2 9.5), and I got the error message below in two of the table move sessions:
20090917 174517 ONLINE CONVERSION: Start of Step 1 (INIT)
20090917 174517 CALL SAPTOOLS.ONLINE_TABLE_MOVE( 'SAPBD1', '/BIC/AZGL_D00600',
                  'BD1#ZDGLAD', 'BD1#ZDGLAI', '', '', '', 'INIT' )
20090917 174518 ONLINE_TABLE_MOVE - INIT step aborted.
20090917 174518 SQL0443N Routine "*BLE_MOVE" (specific name "") has returned an error
                  SQLSTATE with diagnostic text "SQL0624N Table
                  "SAPTOOLS.ONLINE_TABLE_MOVE" already has a ". SQLSTATE=42889
20090917 174518 Step 1 aborted with errors
I then chose "Continue" on one session alone, it completed successfully.
If this is a problem when running DB6CONV online table move in parallel? Is there any way to fix this problem?
Thanks,
Patrick

Hi Siegfried,
My trace file will excee the maximum 15000 characters allowed in this forum. If you like I can send you in the email.
With a single table move, it will not fail. So the trace file below showed a successful init step:
13286: entry: SQLT_db2sap_online_table_move     "SAPBD1"        "/BIC/B0001321000"      "INIT,TRACE"
838: entry: SQLT_db2sap_Otm_constructor       fffffffffff5c40
    145: entry: SQLT_db2sap_StoredProcedure_connect     fffffffffff5c40
    172: exit: SQLT_db2sap_StoredProcedure_connect=0
    113: entry: SQLT_db2sap_StoredProcedure_initVersion fffffffffff5c40
      130: SQLT_db2sap_StoredProcedure_initVersion      "driverVer"     "09.05.0002"
    136: exit: SQLT_db2sap_StoredProcedure_initVersion=0       true    true
    877: SQLT_db2sap_Otm_constructor    "indexNameSz"   128
    880: SQLT_db2sap_Otm_constructor    "triggerNameSz" 128
883: exit: SQLT_db2sap_Otm_constructor=0
2951: entry: SQLT_db2sap_Otm_getProtocolEntryAsInt    "TRACE" fffffffffff5c40 true    0
    2921: entry: SQLT_db2sap_Otm_getProtocolEntry       "TRACE" fffffffffff5138 129     fffffffffff5c40 true    "<null
>"
      2847: entry: SQLT_db2sap_Otm_getProtocolEntry     "SAPBD1"        "/BIC/B0001321000"      "TRACE" fffffffffff513
8       129     fffffffffff5c40
        305: entry: SQLT_db2sap_StoredProcedure_prepare "SELECT COALESCE(value, longvalue) AS VALUE FROM SAPTOOLS.ONLI
NE_TABLE_MOVE WHERE tabschema = ? and tabname = ? and key = ? OPTIMIZE FOR 1 ROW"       fffffffffff5c40 false
        323: exit: SQLT_db2sap_StoredProcedure_prepare=0
        2890: SQLT_db2sap_HANDLE_SQLCA -100014
      2903: exit: SQLT_db2sap_Otm_getProtocolEntry=-100014     ""
      2847: entry: SQLT_db2sap_Otm_getProtocolEntry     ""      ""      "TRACE" fffffffffff5138 129     fffffffffff5c4
0
        2890: SQLT_db2sap_HANDLE_SQLCA -100014
      2903: exit: SQLT_db2sap_Otm_getProtocolEntry=-100014     ""
      2940: SQLT_db2sap_HANDLE_SQLCA    -100014
    2943: exit: SQLT_db2sap_Otm_getProtocolEntry=-100014       ""
2981: exit: SQLT_db2sap_Otm_getProtocolEntryAsInt=0 0
3469: entry: SQLT_db2sap_Otm_setLock fffffffffff5c40
    2921: entry: SQLT_db2sap_Otm_getProtocolEntry       "LOCK" fffffffffff50d8 129     fffffffffff5c40 false   ""
      2847: entry: SQLT_db2sap_Otm_getProtocolEntry     "SAPBD1"        "/BIC/B0001321000"      "LOCK" fffffffffff50d
8       129     fffffffffff5c40
        2890: SQLT_db2sap_HANDLE_SQLCA -100014
      2903: exit: SQLT_db2sap_Otm_getProtocolEntry=-100014     ""
    2943: exit: SQLT_db2sap_Otm_getProtocolEntry=0     ""
    2993: entry: SQLT_db2sap_Otm_protocolTime   "LOCK" fffffffffff5c40
      305: entry: SQLT_db2sap_StoredProcedure_prepare   "MERGE INTO SAPTOOLS.ONLINE_TABLE_MOVE AS t USING TABLE
323: exit: SQLT_db2sap_StoredProcedure_prepare=0
922: entry: SQLT_db2sap_Otm_destroy   110029290       fffffffffff5c40
    3522: entry: SQLT_db2sap_Otm_releaseLock    fffffffffff5c40
    3536: exit: SQLT_db2sap_Otm_releaseLock=0
    770: entry: SQLT_db2sap_Otm_deinitReplay    fffffffffff5c40
    788: exit: SQLT_db2sap_Otm_deinitReplay=0
    181: entry: SQLT_db2sap_StoredProcedure_disconnect fffffffffff5c40
    260: exit: SQLT_db2sap_StoredProcedure_disconnect=0
    648: entry: SQLT_db2sap_StmtPool_destructor
      649: SQLT_db2sap_StmtPool_destructor      2
    654: exit: SQLT_db2sap_StmtPool_destructor=0
    181: entry: SQLT_db2sap_StoredProcedure_disconnect fffffffffff5148
    260: exit: SQLT_db2sap_StoredProcedure_disconnect=0
997: exit: SQLT_db2sap_Otm_destroy=0
13634: exit: SQLT_db2sap_online_table_move=0   "00000" ""

Problem with tables in pdf

Hey,
I converted my final master's thesis to pdf with the Adobe Acrobat Pro. Everything worked out fine, even all the graphs etc... but there's a small problem with my tables: I only have horizontal lines to separate the heading from the rest, but there are small marks where the hidden vertical lines cross the horizontal lines....they don't show in the word-file, only the pdf. Anybody know this problem and a solution to it?
Thanks a lot in advance
OH

This is likely a result of the display resolution you used when you created the PDF (under advanced in the properties). The default is 1200, that creates problems on a 96 dpi screen. If you zoom, you will likely see the lines. A fix is to change the setting to about 300 dpi or so.

Facing a small problem while executing WDA application from portal

Hi Experts,
I developed web dynpro for ABAP application and placed table UI control, which contains 270 records. Executing from SE80, it is working fine and showing clearly all records.
This application integrated in portal, while executing this applicaiton from portal, it is working fine and showing all records.
Here I facing a small problem i.e Pager ( footer area ) of table.
When the table is displayed there are the small box in the below of the table showing ROWS 244 of 270.
244 will be available in a small box. this 244 is not showing clearly, while executing from portal ( last digit 4 displying half part only). but 244 showing clearly while executing from SE80.
Kindly suggest how to resolve this problem.
Thanks & Regards
Sridhar

Hi Gopi Krishna,
Thanks for your time. From SE80, it is working fine and showing clearly row number. There is no property for increase width of small box, which contains current row number).
Facing problem while executing from portal.
Thanks & Regards
Sridhar

My tables move when i insert a photo how do i expand photos to fit without them moving

my html tables move when i insert a photo how do i expand photos to fit table without the original struture moving?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.font {
     verdana;
</style>
</head>
<body>
<table width="123%" height="641" border="1" cellpadding="1" cellspacing="12" style='table-layout:fixed'>
<tr>
    <td width="75%" height="219" colspan="4"></td>
    <td width="25%" rowspan="2"></td>
</tr>
<tr>
    <td height="152"></td>
    <td>F</td>
    <td></td>
    <td></td>
</tr>
<tr>
    <td height="220" colspan="4"></td>
    <td></td>
</tr>
</table>
</hr>
</body>
</html>

Hi,
you are working with a percentage width of your tables, for example:
table width="123%
td width="75%"
td width="25%"
So it is simply a arithmetic problem to get the proportional wide (means the ratio of % to cm) of your images, so that they do not break the frame. Certainly you could use (translated from German DW) "properties" and change the sizes there:
Hans-G.

Options for resize datafile lower than high watermark besid alter table mov

hello all,
I have an issue where i am getting ORA-03297 error when trying to resize the datafile. Its becuase of high watermarks. I know i have couple of options...either resize it till the high watermark or Drop or move segments containing extents in this region prior to
resizing the file....but the situation is this....this a test env...and we have couple of chained rows and doing that(alter table move) will get rid of our chained rows and we do not want that....as we are testing the removal of chained row from our prod systems....as i mentioned we cant do alter table move
what other options do we have in order to shrink datafile below highwater mark besides moving or droping the segment into a different tablespace as we want to preserve the chianed rows for our testing and making the DB smaller in size (space issue on the server ) ??? any ideas or any thoughts ??
we are on 10.2.0.3 on AIX system
i have already went thru these metalink doc .... on that error
Note 1029252.6 - How to Resize a Datafile
Note 130866.1 - How to Resolve ORA-03297 When Resizing a Datafile by Finding the Table Highwatermark
Note 237654.1 - Resizing a Datafile Returns Error ORA-03297

i am sorry not able to get your question ??
I want to shrink the space of the Datafile without removing the chaned rows for testing the removal of chianed row for prod. The reason why is becoz of rman backup space issue. If we shrink the datafile our DB will be down to 150GB....and if we cant its about 450GB...which is big difference...and the reason for backup for this dev env is because once we have tested teh removal of chained rows...we will restore it again and re-test it and its a very mission critial system...we need to test this min of 3 times to get teh change approved...thats why...if we have a backup now...we can remove chain rows and then restore it back to this point and test it again...if you know wat i mean

Problem with table formatting

I'm having a lot of problems with tables not reflecting their formatting when I open them in a browser. I've tried opening in Safari, Firefox & Camino with the same results. For example, a row with the following html content has a much larger height & aligns the text to the top when opened in a browser:
<tr>
          <td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
          </td>
        </tr>
If it matters, this is a row in a table nested in another table. Here's the code down to the row in question (all tags are closed properly in the remaining code):
<table width="600" border="2" align="center" cellpadding="0" cellspacing="0">
    <tr>
      <td align="center" valign="top"><img src="images/events.jpg" width="250" height="35"></td>
    </tr>
    <tr>
      <td align="left" valign="top">
      <table width="100%" border="0" align="center" cellpadding="1" cellspacing="0">
        <tr>
          <td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
          </td>
        </tr>
I am using a style sheet for text. Here's the code for "h6" if that matters:
h6 {
font-family: Verdana, Geneva, Arial;
font-size: 14px;
font-weight: bold;
color: #660099;
Any ideas is appreciated. This is driving me nuts. Spacing and alignment sometimes work and sometimes don't work. Dreamweaver is supposed to make such things easier!
Kevin

Header tags are usually used round a bit of text, not parts of a table, and if you don't specify the margins on them, can force different amounts of space below in different browsers. Try making the bottom margin on h6 zero, and confine it to text within a cell.
Also, if you can upload your page somewhere and let us have the url it will be easier to troubleshoot.

Problem in Table maintenance view

Hi all,
i am getting some problem in table maintenance view.
In my table i have some fields and when i created my table maintenance view , it is created , but when i try to see it in SM30 its not showing my fields and even i am unable to create a new entry. when i click
new entries its going back to the sm30 screen..
How to go abt it
please help me

Hello,
Have you created the table maintanence view the right way.
You can get good help from below link: [[http://www.****************/Tutorials/ABAP/TableMaintenance/demo.htm]]
Also, please check the Delivery Class and Data Browser/Table View Maint. in the Delivery and Maintanence tab of the table.
Thanks,
Jayant
Edited by: Jayant Sahu on Nov 24, 2008 3:00 PM

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room.

Problem with tables -- need help!

I am having problems with table formatting, when using
Preformatted text. The tables look fine in the WYSIWYG editor, but
have lots of extra space above and below the text when looking at
the output files.
I will attach the code from one of the HTML files from my
project, so you can see what I'm talking about.
Thanks.

Well, if you're talking about the single-celled table with
the line:
<p class=Preformatted>[assembly:
Ace.AceAssembly]</p>
</pre>
... you can eliminate the <P> tags. that will give you
one line less. Otherwise, your remaining space is the result of the
<PRE> tag. It, like the <XMP> tag, gives it one line of
space beneath as well.
Your alternative beyond that would be to, when needed, wrap
up the script in Javascript. That line, for instance, wouldn't need
it.

Alter table move in 8.1.7

I did a alter table move on one of the tables in 8.1.7 database
before alter table move..
TABLE_NAME ACTUAL_SIZE_MB CUR_SIZE_MB FRAGMENTATION PROJECTED_SAVINGS_MB
UDA_ITEM_FF 36.07 328 89 291.93
after the alter table move..
TABLE_NAME ACTUAL_SIZE_MB CUR_SIZE_MB FRAGMENTATION PROJECTED_SAVINGS_MB
UDA_ITEM_FF 57
why after the alter table move, I am only able to see the current size and not the actual size?
any inputs welcome

Handle: dee
Status Level: Newbie (5)
Registered: Jun 14, 2010
Total Posts: 61
Total Questions: 30 (30 unresolved)
If its working , Please mark thread as answered why you leave your thread in Open Status

Images in Table move on Mouse Over

I made a simple table-based photo gallery.
On mouse-over, a coloured bar appears at the bottom of the selected image. At the same time the image moves upwards slightly, presumably the same distance as the width of the coloured bar.
Depending on the position of the image within the table, either one or more rows within the table move at the same time.
I received some feedback from a viewer that they do not like this movement of the table
Can you suggest any way to make the table more stable, i.e. remain still during mouse-over.
See: http://www.eyta.org.uk/photos.html

First, I don't like table-layouts. They're last century's layout approach. Nobody uses table-layouts anymore. We use CSS floats now.
Photo Layout example:
Alt-Web Templates :: CSS Semi-Liquid, Photo Proof Sheet
Secondly, if you're adding a border on hover, you need to add similar same sized border for the non-hover state. Otherwise the jumping is inevitable owing to how the CSS box-model works.
Example CSS:
a {text-decoration:none; border-bottom: 1px solid #FFF}
a:hover {border-bottom: 1px solid #000}
Nancy O.

Very small problem RE: Variable not initializing

//Hey, folks! Having a small problem here. Compiler keeps telling me that "result" variable may not have been initialized for this method. This is probably an issue of variable scope? It's staring me in the face and I can't see the problem. Can you see the problem?
public Shape randomShape()
          Random generator = new Random();
          intShapeDecider = generator.nextInt(3);
          int intCrdntX1 = generator.nextInt(500);
          int intCrdntY1 = generator.nextInt(500);
          int intCrdntX2 = generator.nextInt(500);
          int intCrdntY2 = generator.nextInt(500);
          int intWidth = Math.abs(intCrdntX1 - intCrdntX2);
          int intHeight = Math.abs(intCrdntY1 - intCrdntY2);
          Shape result;
          if (intShapeDecider == 0)
               result = new Line2D.Double(intCrdntX1,intCrdntY1,intCrdntX2,intCrdntY2);
          else if (intShapeDecider == 1)
               result = new Rectangle(intCrdntX1,intCrdntY1,intWidth,intHeight);
else if (intShapeDecider == 2)
          result = new Ellipse2D.Double(intCrdntX1,intCrdntY1,intWidth,intHeight);
          return result;
     }

Nope...don't think that's the problem. My random ints are only 3 possible nums ...0,1, or 2. I have an if for each possible condition. Therefore, nothing "else" can really happen. No?

Problem to import MOV files

Hi,
I have a problem to import mov files from my hard disk (coming from a Casio Exelim ZR100 @ 1920x1080, 30 pic/sec. 44kHz, codec: H.264/AVC ). I tried different project setups - doesn`t work . I get a common failure message. MTS file import works...
System Win 8
Premiere Elements last version, all updates done
Error Message:
nase30

Media import
A Google Translate of your error message says that you are experiencing a generic importer error; consequently, not an editing nor exporting issue.
If you are using the Casio ZR 100, the video involved would be characterized as
1920 x 1080 @ 30 frames per second (progressive)
Video compression = AVCHD (MPEG4 AVC/H.264)
Audio compression = IMA-ADPCM (stereo)
File Extension = .mov
On the Premiere Elements side you have Premiere Elements 11 on Windows 8 (assumed 64 bit).
I have downloaded one of these files from your camera brand/model from an online source.
Windows 7 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Windows 8 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Based on my findings, I have no evidence to make a generalization that there is a problem with this Casio video and Premiere Elements 11 on Windows 7 64 bit or Windows 8 64 bit.
So that leads us to look for other factors. Top of the list is the version of QuickTime that you have installed on your computer. (As John T. Smith has already asked and is awaiting a reply on that. If you have the latest version of QuickTime installed, then I would uninstall it and then reinstall it.
What type of problem are you report
"it worked before but not now"
or
"it never worked before"
What might be interesting to look at. If you rename just the file extension of your Casio AVCHD.mov from .mov to .mts, .m2t, or .m2ts can you then import the problem file?
We will be watching for your results.
Thank you.
ATR

Small problem in table move

Similar Messages

Maybe you are looking for