Options for resize datafile lower than high watermark besid alter table mov

hello all,
I have an issue where i am getting ORA-03297 error when trying to resize the datafile. Its becuase of high watermarks. I know i have couple of options...either resize it till the high watermark or Drop or move segments containing extents in this region prior to
resizing the file....but the situation is this....this a test env...and we have couple of chained rows and doing that(alter table move) will get rid of our chained rows and we do not want that....as we are testing the removal of chained row from our prod systems....as i mentioned we cant do alter table move
what other options do we have in order to shrink datafile below highwater mark besides moving or droping the segment into a different tablespace as we want to preserve the chianed rows for our testing and making the DB smaller in size (space issue on the server ) ??? any ideas or any thoughts ??
we are on 10.2.0.3 on AIX system
i have already went thru these metalink doc .... on that error
Note 1029252.6 - How to Resize a Datafile
Note 130866.1 - How to Resolve ORA-03297 When Resizing a Datafile by Finding the Table Highwatermark
Note 237654.1 - Resizing a Datafile Returns Error ORA-03297

i am sorry not able to get your question ??
I want to shrink the space of the Datafile without removing the chaned rows for testing the removal of chianed row for prod. The reason why is becoz of rman backup space issue. If we shrink the datafile our DB will be down to 150GB....and if we cant its about 450GB...which is big difference...and the reason for backup for this dev env is because once we have tested teh removal of chained rows...we will restore it again and re-test it and its a very mission critial system...we need to test this min of 3 times to get teh change approved...thats why...if we have a backup now...we can remove chain rows and then restore it back to this point and test it again...if you know wat i mean

Similar Messages

  • FILMING WITH REBELT31, OPTIONS FOR RECORDING IN LOW LIGHT.

    Hi there everyone.  My question is that I want to know about a lenses that supports me good definition and quality in low light conditions.  I am recording with a Rebel t3i. Thanks in advance.

    bebefle_89 wrote:
    This is my first DSLR and I am recording weddings and parties.  For the nature of these events, most of them have low light  conditions.  I also need advice of a gadget to record everything without changing SD cards.  Thanks.
    The solution is a bigger (higher capacity) SD card. =)  They go up to 64gb and 128gb now which should provide A LOT of recording capacity.  
    bebefle_89 wrote:
    At the time, I've been working just with the 18-55 (the one that comes with the camera package), but I need an aditional lense because this lense I have, is graining all my videos because of the adjustment of ISO.
    How much do you understand about f-stops, shutter speed, and ISO?  What exposure settings are you using now for your videos?  In short, you need a lens that can open up to a larger aperture (such as f/1.8, f1.4 or f1.2).
    Here are some guides that will be helpful in explaining these concepts for you: 
    http://www.exposureguide.com/exposure.htm
    http://www.makethephoto.com/articles/how-to-make-the-jump-from-automatic-shooting-to-manual-shooting

  • Options for receiving audio other than onboard mic...

    I spent about 8 hrs in my home studio making a really awesome voice mail message for my Verizon account. After I completed my new snazzy message I attempted to record it to my voice mail account. When the phone promoted me to say my message I simply played my recording through the speakers and held up the phone. Ugh! Sounded terrible. I tried different volumes of playback, diff distances from speakers... nothing could make it sound clear like it does in the actual room. Then I tried my Bluetooth headset with the understanding that the thing is marketed as having a good mic. No better. So I called Verizon and they claim to have no way to digitally transfer my mixdown to the account (I was thinking if I could make my message into a MP3 r whatever, maybe I could upload it somehow). No go. So I'm forced to record it real time to Verizons recorder. Soooo...does this Curve here have any sort of alternative to the onboard mic other than a Bluetooth? A line in would be perfect as I could play my mix into the phone bypassing the mic altogether. But I think I'm outta luck. Any ideas for me? 

    I think you're out of luck as you said.
    This is a Verizon function, not of the BlackBerry. The voicemail system lies in their servers somewhere.
    I don't know of any line-in function. It's not available.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Better options for defining config directory than in JSP?

    String defaultConfigPath = "/opt/WebSphere/AppServer/properties/config";
    final String APP_CONFIG_DIR = "appConfigDir";
    String configPath = System.getProperty(APP_CONFIG_DIR, defaultConfigPath);This is all fine and dandy, however, the configuration default path is for a WebSphere 4.0 configuration; there is talk down the pipeline to upgrade to WebSphere 6.1, whereby the default configuration path is subject to change.
    This will not affect "appConfigDir" as that is ultimately pulled from the JVM, but what if we have some non-understanding admin that doesn't know to set that JVM system property and relies on the default directory which itself could be wrong? If so, wouldn't it be better to set defaultConfigDir somewhere other than the JSP which requires redeploying the entire EAR file to make the change?
    What suggestions do you have?
    Thanks

    I think you're out of luck as you said.
    This is a Verizon function, not of the BlackBerry. The voicemail system lies in their servers somewhere.
    I don't know of any line-in function. It's not available.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Oracle compress with option FOR OLTP

    Hi
    I'm trying out compression on oracle but for unknown reason i cant use option "for oltp" (se below)
    any ideas  ?
    SQL> create table ct(x int) compr for oltp
      2  ;
    create table ct(x int) compr for oltp
    ERROR at line 1:
    ORA-00922: missing or invalid option
    SQL> create table ct(x int) compress;
    Table created.
    SQL> drop table ct
      2  ;
    Table dropped.

    There is no compr keyword, it's compress
    SQL> create table ct(x int) compr for oltp;
    create table ct(x int) compr for oltp
    ERROR at line 1:
    ORA-00922: missing or invalid option
    SQL> create table ct(x int) compress for oltp;
    Table created.
    Cheers Michael

  • When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I t

    When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset

    Hi! I have the same problem when I use my headphones .
    iPhone 4s England, iOS 6.1.2

  • Down payment amount cannot be higher/lower than the preset value Error

    Hello.  Can anyone help me with this error.  When creating a down payment request from a sales order with a billing plan, I get the message 'Down payment amount cannot be higher/lower than the preset value' and the document isn't released to accounting.  When creating the sales order, I included a condition type that I created.  The billing plan then calculates the down payment request value with the total sum i.e net value plus condition value.  Upon creating the down payment request in VF01, I get this message.  I did a test and noticed that, if the condition is not included in the sales order, the down payment request is created without errors.  How do I correct this?  Thanks for you anticipated response.

    Hi
    As you are getting error, 'Down payment amount cannot be higher/lower than the preset value' ,please check the total value of the document.So in the sales document ,billing plan check what is the invoice value for the first billing date , also check what is the sales order value.Secondly what is the condition type that has been created and for what purpose it is being used.
    Regards
    Srinath

  • Select-options split date into month and assign to low and high

    Hi,
       In my select-options i am giving BEDAT (01.04.2004 TO 30.10.2005).I need to split month and
    year in separate fields.that is
    select-option_low-month in one field
    select-option_high-month in second field
    select-option_low-year in third field
    select-option_high-year in fourth field.
    Finally i need to move these four fields to it_final.
    select * from mbewh into corresponding fields of table it_mbewh
               for all entries in it_final where matnr = it_final-matnr and
               bwkey = it_final-werks and lpmon = ? and lfgja = ?
               and  bklas <> ' '.
    what input i have to give in lpmon and lfgja in select query to get for lfmon (04 to 10)
    and lfgja (2004 to 2005).
    suggest some ideas.

    Hi ,
    Can you please check the following code.
    Hi ,
    data :  l_low_yr(4),
              l_high_yr(4),
              l_low_mon(2),
              l_high_mon(2).
    Splitting the select option date to month and year into low and higher values
    l_low_yr        =   s_date-low+00(04). "  Year low value from the date range
    l_low_mon    =   s_date-low+04(02). "  Month low value from the date range
    l_high_yr      =   s_date-high+00(04)."  Year high value from the date range
    l_high_mon   =   s_date-high+04(02)." Month high value from the date range
    selecting the data from the table mbewh based on some conditions.
    select * from mbewh into corresponding fields of table it_mbewh
               for all entries in it_final where matnr = it_final-matnr and
               bwkey = it_final-werks and lfmon BETWEEN  l_low_mon and l_high_mon
    and lfgja BETWEEN l_low_yr and l_high_yr   and  bklas EQ  ' '.
    This select will retrive the desired data records from the table MBEWH.
    Please let me know if this works according to your requirement.
    Thanks and Regards
    Saritha

  • TS3899 Hi. How do I attach more than one document to an email on the iPad, especially if they come from different apps? When writing an email on the iPad there's no option for attachments.

    Hi. How do I attach more than one document to an email originating from my iPad, especially if the documents come from different apps? When starting an email there's no option for attachments, unless you send the document from inside an app like iBook and then you can only send one at a time.

    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
     Cheers, Tom

  • HT1277 I have OS X 10.9.2 and have downloaded maverick. If I am sending an email message to one person, options for addresses  from my address book show up. However if I want to send it to more than one person, the address options for the others do not sh

    I have OS X 10.9.2. and have downloaded Maverick. If I am sending an email message to one person, options for addresses from my Address Book appear. However if I want to send it to more than one person, the potential addresses for the other persons do not show. Can you please help?

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • How do you fix error message "data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".

    When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".  We need help to correct this so we can complete burning to DVD. 

    What did you export from Premiere?
    Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • Is there no purchase option for Illustrator other than the cloud monthly plans , same question for dreamweaver

    hello
    I own Photoshop Elements and Premier Elements but can't find a similar option for Illustrator and Dreamweaver.  Are there no other possibilities for these softwares other than the monthly rental (cloud) plan?
    Thanks.
    Sincerely,
    Bruce Scism

    Creative Suite 6
    Mylenium

  • IDVD won't give an option for higher capacity DL discs

    Hello,
    Using iDVD version 7.1.2 (1158)
    In the 'Project Info' window, under 'DVD Type:' the only options given are Single Layer 4.2GB or Double-Layer 7.7GB.
    According to the info, my project is 150 min, 8.21 GB.
    I'd like to burn a DVD using Memorex DVD+RDL media which has a stated capacity of 8.5GB or 240Min (from the label).  There is no option for this.
    Is there a reason why Apple gives 2 such strange sized options for SL and DL options?  Is iDVD reserving room on the disc for other stuff?
    Thank you for your help!

    Whether you can use DL disks is not governed by iDVD but by your superdrive. Check in 'About this Mac' if yours supports dual layer media.
    Memorex is not recommended. Verbatim or Taiyo Yuden are.
    150 minutes should fit comfortably on a DL disk, as the project will of course be compressed to the standard DVD format of mpeg2:
    iDVD encoding settings:
    http://support.apple.com/kb/HT1502?viewlocale=en_US
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
    Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t.  The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • How to add extra options for style of images.   iPad version has far more options than Mac version

    How to add extra options for style of images in pages.   iPad version has far more options than Mac version

    Thank you, you made me go look again and I realised the ones I use on the iPad are under Borders not style and they are on Mac also.  I feel a bit silly but I wouldn't have got there without your prompting.  Do you mean by "create your own"  using the borders and then saving as a style or can you create something that is not in either?
    Thanks again

  • Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks

    Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks

    I've got a feeling that's the way it is. I know that if I turn the volume down all the way, I can still hear the music very softly -- which is great for listening when I have a migraine!

Maybe you are looking for