Someone made an account by my name and email.

Someone used my email ( i will keep this secret till further notice) and and my skype name (will not publicize this either) to create an account. I would like this account deleted as it feels like a violation of my privacy.

Hi, Crux, and welcome to the Community!
I agree with you! You will need to contact Skype Customer Service directly to deal with this. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
As you know you intend to contact Customer Service, skip past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the "button" appears at the lower right corner of the website page). You may also skip past in Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

I ordered Illustrator for another user. I received an invitation that was accepted, logged in and tried to change the account to the name and email of the person it was ordered for. How can I get this changed and the invitation sent to the right person?

I ordered Illustrator via creative cloud for another user. I received an invitation that was accepted and tried to change the account to the name and email of the person it was ordered for. How can I get this changed and the invitation sent to the right person?

Cloud as a Gift https://forums.adobe.com/thread/1665610

How can I close a fake account with my name and my picture?

I just noticed that there is a fake account with my name and my picture!!! How can I report or even close it?
I have no idea who made this or how used it
Please help me
I sent an email to [e-mail removed for privacy and security] but seems it's no longer valid!
Please if you know a way that can help me, share it with me.

You should be able to connect to their computer via your USB cable, copy the video over using Windows Explorer and the PC should be able to view it without any conversion.
When you do this, make sure they don't have iTunes set to automatically open and automatically sync when an iOS device is connected.

Vendor account number ,Name and Email

Hi
I am looking for solution where i can download Vendor account number,name
and email address,is there any standard table in SAP to download this data,i tried
Abap query with LFA1 and ADR6 tables but it is not working ,can any help on this
Thanks
Lily

Hi,
Table LFA1 and ADR6 are right but in query, these tables will not be linled by system authomatically.
You have to link these table manually by using field ADRNR in table LFA1 and field ADDRNUMBER in table ADR6.
I hope it will resolve the issue.
Regards,
Vinod

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Try this:
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).

Script to extract names and email addresses of all recipients of an email

Hi,
I have found some scripts which extract email addresses from the content of messages in Mail, but I am looking for something rather different, and wonder if such a script exists, or if someone can help me build one. I would like to create a tab delimited text file of the first name, last name and email address of all recipients of a given message in Mail. Most email addresses will be in the format John Doe <[email protected]>.
Thanks,
Nick

Hi,
nick_harambee wrote:
I have one outstanding issue, which wasn't included in the original question. Sometimes email addresses are included in the Name of the recipient, i.e. instead of 'John Doe', it reads 'John Doe ([email protected])'. Could you script be adapted to delete any block of text (i.e. space delimited) that includes the @ symbol, so that 'John Doe ([email protected])' would return:
John<tab>Doe<tab>[email protected]
Use this handler:
on splitName(t)
    if "@" is in t then -- to remove the address after the name
        set n to -3
    else
        set n to -2 -- normal name
    end if
    set tid to text item delimiters
    set text item delimiters to space
    set l to text items of t
    if (count l) = 1 then -- no space
        set r to tab & t & tab -- last name only
    else
        tell l to set r to "" & (items 1 thru n) & tab & (item (n + 1)) & tab
    end if
    set text item delimiters to tid
    return r
end splitName

ERROR: Your web form must capture customer name and email address.

Hi,
I keep receiving this error message when trying to checkout and submit a payment.
ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page.
The strange thing is it's only happening in chrome. It works perfectly in IE and firefox, the form submits and takes me to the order confirmation page. I've tested it on multiple PCs so it's definitely a chrome issue. Does anyone have any advice as to what could be causing this issue with chrome?
Thanks,
Pete

Check your eCommerce web form in the admin has the ID - 211729
This is what the form ID is, if you have deleted it and made a new one it will not Marry up
The things you normally look for with this error is The first name and last name along with email fields have the right ID and name parameters on the input. The javascript is picking those up so it looks like that is working.
So next is the form in the admin marrying up with the form on the page or in this case the Registration Buy layout.

My iphone 4 is losing telephone numbers at a rate of 2 or 3 a day from contacts. The name and emails remain. Why?

my iphone 4 is losing telephone numbers at a rate of 2 or 3 a day from contacts. The name and emails remain. Why?
It was happening before IOS 8 was launched

Hello there William Malmesbury,
It sounds like your Contacts app seems to be losing your contacts phone numbers, but the rest of the information is fine. If you don't already have a backup, I would create one either with iCloud or iTunes, or even both:
Back up and restore your iOS device with iCloud or iTunes
If you use iCloud I would use these steps from the following article:
Get help using iCloud Contacts
See if a contact is stored with iCloud or another service, such as Google or Yahoo:
Open Contacts and tap Groups in the upper-left corner.
Deselect the All [account] option for any third-party, such as Gmail or Yahoo.
Make sure All iCloud is selected.
View your contacts. If the contact isn't visible, then it exists in a third-party account.
You can import the contact from a third-party service into iCloud. iCloud won't sync contacts that are associated with a different service.
You need to make sure that iCloud is your default account for Contacts:
If you want new contacts to appear automatically on your devices.
If you're syncing contacts with multiple accounts on your device (iCloud, Gmail, Yahoo) and recent changes to Contacts on your iOS device don't appear on your other devices.
See if iCloud is your default account:
Tap Settings > Mail, Contacts, Calendars.
In the Contacts section, tap Default Account.
Make sure iCloud is selected.
Restart Contacts
Close and restart the Contacts app on your iOS device:
iOS 7:
Double-click the Home button to see your open apps.
Find the Contacts preview screen and swipe it up to close the app.
Press the Home button to return to your Home screen.
Wait a minute, then reopen the Contacts app.
Turn iCloud Contacts off and back on
Tap Settings > iCloud.
Turn Contacts off.
You can choose Delete from My [device] if your data exists at icloud.com/contacts and on one or more of your devices. Otherwise, choose Keep on My [device].
Wait a few minutes, then turn Contacts back on.
Restart your device
Hold down the Sleep/Wake button, then drag the slider when asked to power off. Turn your device back on.
If not, I would start by quitting all the running apps on your phone:
iOS: Force an app to close
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
Thank you for using Apple Support Communities.
All the very best,
Sterling

How do i fix the "web form must capture customer name and email address" error?

Hi all,
I have a webform that is submitting securely to the bc servers. I get the response:
{"SystemMessage": { "success": False, "message": "ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page." }}
I have verified that the "FirstName","LastName","EmailAddress" are actually gettting sent with their corresponding values. I can't seem to figure out why i keep getting this error. Can someone please lend a helping hand?!? Thanks guys... here's my code:
var rAction = 'https://site.worldsecuresystems.com/FormProcessv2.aspx?WebFormID=85886&OID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={module_cid}&CC={module_urlcountryc ode}&Referrer={module_siteurl,true,true}&JSON=1';
var rData = 'FirstName='+escape(fName.val())+'&LastName='+escape(lName.val())+'&EmailAddress='+escape (email.val())+'&Username='+escape(username.val())+'&Password='+escape(passwd.val())+'&Pass wordConfirm='+escape(passwd2.val())+'&BillingAddress='+escape(baddress.val())+'&BillingCit y='+escape(bcity.val())+'&BillingState='+escape(bstate.val())+'&BillingZip='+escape(bzip.v al())+'&PaymentMethodType='+escape(paymentMethodType)+'&CardName='+escape(cName.val())+'&C ardNumber='+escape(cNum.val())+'&CardExpiryMonth='+escape(expMonth)+'&CardExpiryYear='+esc ape(expYear)+'&CardType='+escape(cType)+'&CardCCV='+escape(ccv.val())
$.ajax({
type: 'POST',
url: rAction,
data: rData,
success: function(msg){
console.log('success');
$('#result').html(msg);
error: function(msg){
console.log('error');
$('#result').html(msg);

Ok -- after testing this out a little on my own I think it must have to do with not properly serialzing the data you are passing in the ajax function. In the example I linked to earlier they are just serialzing the form data and it works because it converts the data in the form's input fields to URL encoded notation.
If you aren't using an actual form on your site to mimick the example I linked to then when building your "rData" string instead of using the "escape" function for each of the parameter values, you should be using the "encodeURIComponent" function instead which instead of escaping characters will convert it to URL encoded notation. That's probably your issue. Here's more about encodeURIComponent(): http://www.w3schools.com/jsref/jsref_encodeURIComponent.asp
Try this with the rData variable instead:
var rData = 'FirstName='+encodeURIComponent(fName.val())+'&LastName='+encodeURIComponent(lName.val()) +'&EmailAddress='+encodeURIComponent(email.val())+'&Username='+encodeURIComponent(username .val())+'&Password='+encodeURIComponent(passwd.val())+'&PasswordConfirm='+encodeURICompone nt(passwd2.val())+'&BillingAddress='+encodeURIComponent(baddress.val())+'&BillingCity='+en codeURIComponent(bcity.val())+'&BillingState='+encodeURIComponent(bstate.val())+'&BillingZ ip='+encodeURIComponent(bzip.val())+'&PaymentMethodType='+encodeURIComponent(paymentMethod Type)+'&CardName='+encodeURIComponent(cName.val())+'&CardNumber='+encodeURIComponent(cNum. val())+'&CardExpiryMonth='+encodeURIComponent(expMonth)+'&CardExpiryYear='+encodeURICompon ent(expYear)+'&CardType='+encodeURIComponent(cType)+'&CardCCV='+encodeURIComponent(ccv.val ())

Using Elements 7 and cannot change name and email. Need help

I am trying to change Photoshop Elements 7 log in name and email and it will not let me do this. What do I need to do?

Where are you trying to login? PSE7 didn't require to login anywhere buy#t if you created a photoshop.com account then it is gone forever. Instead, Adobe now uses Revel but please tell us where are you trying to login.

Managing Users - Editing a User Name and Email?

Hello!
I have absolutely no experience using the Windows Small Business Server 2003. Our IT person showed me how to add Users and this is bascially the only task I perform with regard to the server.
I recently added a new User and accidentally misspelled his name. I went back in and edited the User file to correct the name and I was able to send a test email to him and receive a response from him - however, the response came in with the sender's
name still misspelled. I went back in to the User file and found that the alias still showed the misspelled name. I corrected the error there but now the User is not able to send or receive email.
To to clarify:
1. I entered the User name incorrectly - I typed the name ending in "ki" instead of "ik".
2. Went back in to the User file and changed the name and email address to reflect the correct spelling - [email protected]
3. Sent test email to User (ik at company dot com) and received a response from User but the response listed the sender as: "Employee Ki" - instead of "Employee Ik".
4. Discovered that alias was still showing "ki" - changed alias to correct spelling.
5. User is not able to send or receive email.
My questions are:
A. Did I do the right thing by simply trying to edit the file to correct the mistake? Or should I have deleted the User and started over?
B. If it is acceptable to simply edit the file, is there some other step I am missing or that still needs to be performed so the User can receive email?
Thank you so very much for your time and assistance! :-)

Thank you so much for responding Larry!
I did go through and make the correction in every tab. (That was actually how I found out that I had missed the "alias").
This employee is mostly out in the field and will be sending and receiving email from his phone or ipad. He was able to send and receive email before I corrrected the "alias" - would changing this cause him to lose the ability to send and receive
email?
Also he left me a note that he is not able to log in under the company acount. When he attempts to log in, he is asked for the "exchange account".
I suspect that this may be more involved than just correcting the misspelling. I appreciate any assistance you may be able to provide.

HT4527 I want to give my iTunes another user name and email with out losing my purchases

How can I change the name and email on my iTunes account without losing all my stuff

You can change your AppleID/e-mail address. In iTunes on the Menu Bar go to Store/View my Apple ID. It'll take you to your account page in iTunes. Where it says Apple ID(your e-mail address) there is a link to edit that information. It shows your current e-mail and password/verify password. Below that is a link to change your security questions and other Apple ID details appleid.apple.com.
On that page it says if you change your e-mail address it'll send a verification e-mail to that address.. and that new Apple ID/e-mail address will be used to access all Apple services(iTunes etc)

How can I send an email to a group in my address book, but hide the individual names and email addresses?

how can I send an email to a group in my address book, but hide the individual names and email addresses?

You used to be able to do this through leaving unchecked the box in preferences "when sending to a group show all member addresses". However, that feature failed some time ago (two or three years?) and the only way to hide the addresses now is to put the group in the BCC field.

How to email a list of names and email addresses?

I have a group of about 60 people with various amounts of data in each of their Address records.
I want to send an email to the group with a list of the names and email addresses of everyone on the list. I don't know how to do this neatly. Got any ideas?
If I put the group name in "to" in Mail, each person gets a messy non-alphabetical list with commas. If I send a group vCard, I send more data than I want to send. If I make a printed list, I have to convert to a pdf file and send that which is not nearly a simple as a text list.
Is there any way to export fields of my choice from Address into either text or spreadsheet format?
I want to send a list like this, but with tabbed columns.
Steve Jobs [email protected]
Barack Obama [email protected]
yourname1 yourname2 [email protected]
Thanks,
Phil

Thanks, Thomas for the prompt response, but the pdf method has two problems.
First, it's got to be in landscape mode, or the email address word-wrap. That makes for a five-page list. I want to send a 60-line text list.
Secondly, there's no way to eliminate the label (work, home, other...) from the email address field.
I will use the pdf method if no one comes up with a better idea.

I open a pdf file with club members names and emails. I used to be able to click on the members email and a outlook box would appear with the email address .

I have a list of names and email addresses (250) and in a previous version of firefox I would go on the web page and when I would place the curser over the members email address and click it would automatically bring up an Outlook email to send box with the members email address already listed and ready for me to enter any information. This new firefox version (19) just lets the curser go across the email address and nothing happens when I click. How do I get the previous feature back?

Current Firefox versions have enabled a new build-in PDF Viewer and that viewer doesn't have all the features that the Adobe Reader has.
You can change the action for Portable Document Format (PDF) from Preview in Firefox to use the Adobe Reader or set to Always Ask.
*https://support.mozilla.org/kb/change-firefox-behavior-when-open-file
You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to completely disable the build-in PDF viewer and use the Adobe Reader instead.
See also:
*https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them

Someone made an account by my name and email.

Similar Messages

Maybe you are looking for