SPROXY - No connection to the Integration Builder

Hi,
While generating a ABAP Proxy the communication between R/3 system and XI 3.0 repository did not work; transaction SPROXY displayed the following error message, 'No connection to the Integration Builder, only local data is visible'.
Can someone please help me out.
Regards,
Jigisha

Hi,
I had the same problem and I have solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa

Similar Messages

  • No connection to the Integration Builder while using ABAP Proxies

    Hi All,
    Here am getting an error when i say SPROXY in R3 system.
       No connection to the Integration Builder while using ABAP Proxies.
    For this i have gone through the blog no 3022.
    and i did all the connection.And then i have gone through the steps
    Go to---->test connection steps.I added the address called com.sap.aii.server.name.repository in SPROXSET table.
    and i run the Tcode SPROXY.Now am getting into DUMP when is say SPROXY.
    And also i run a program called SPROX_CHECK_IFR_ADDRESS to add the address
    but i didn't found the path for Excahnge Profile it was disable.
    and later i run a program SPROX_CHECK_IFR_CONNECTION
    now it went into DUMP.
    Can Anyone suggest me how to fix this error.
    Thanks,
    Kalyan.

    hi kalyan
    1)check whether your R/3 system is based on WEBAS 640 or WEBAS620 (if it is on WEBAS 620 you need to install xi ADD ON,if on WEBAS 640 no need)
    2)check the report SPROX_CHECK_IFR_ADDRESS
    The address is taken the from following parameters in the exchange profile (section 'connections'):
    http://server:port/exchangeProfile --> Connection
    com.sap.aii.connect.repository.name: Server (e.g. pwdf0436)
    com.sap.aii.connect.repository.httpport: Port (e.g. 1080)
    com.sap.aii.connect.repository.contextroot: Root (e.g. rep)
    Furthermore, the logon data is also read from the exchange profile(section 'ApplicationSystem'):
    com.sap.aii.applicationsystem.serviceuser.name: User
    com.sap.aii.applicationsystem.serviceuser.pwd: Password
    rgrds
    kummari

  • Do I need XI system for the connection to the integration builder

    Hi,
    I have a problem which i couldn´t manage to solve with the help of existing threads.
    I got the problem that I dont have a connection to the integration builder, I know thats not new, but i want to know if it is possible to create a connection without XI System Landscape, because our company doenst have this system?
    Hope there are possibilities.
    Thanks
    Volker Weckbach

    Okay, yes its not expressed clearly i think.
    I´ll explain my problem a bit nearer. I´ve worked with the Enterprise Services Builder. Now the Enterprise Services Browser in the TA se80 says that there is no connection to the integration builder, do I need this connection to have access to the work i have done in the ES Builder? I want to do Serviceimplementation.
    If this connection is necessary, is it only possible to realize that via XI?
    Are there ways to implement the service in an other way, maybe via NetWeaver?
    I´m sorry if it´s hard to understand me, but i have not much experience with ABAP programming, i have just started.
    Thanks Volker

  • No Connection to the Integartion Builder

    Hai All,
            When I am trying to create proxies in SAP Server using SPROXY I am getting a message like "No Connection to the Integration Builder".
    Thanking You In Advance.

    hi,
    for r3 to xi proxies it needs some configuration in R3  and XI.
    IN R3 SYSTEM
    1. Create HTTP connection in the business system.
    RFC Destnation : SAPISU_XID
    Configuration Details:
    Technical Setting:
    1. Following Inputs are required for technical setting
    1 Connection Type: H
    2 Target Host: System name
    3 Service Number: HTTP Port name(5<instance no>00)
    4 Path Prefix: /sap/XI/engine/?type=entry
    Logon Security
    On the Logon/Security tab page, enter the following logon data:
    1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
    2 Password: the password you have specified for this user
    3 Client: SAP XI Integration server
    4 Language: Language required
    Configuration Business system as local Integration Engine.
    1. Goto Transaction SXMB_ADM
    2. Choose Edit --> Change Global Configuration Data.
    3. Select Role of Business System: Application system
    4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
    5. Under Specific Configuration Data you can specify additional configuration data
       1.Select the relevant category under Specific Configuration Data.
       2.Choose Change Specific Configuration Data.
       For ABAP Proxies, Add the following configuration:
         1.Category RUNTIME
         2.Parameters: IS_URL
         3.Current Value: dest://SAPISU_XID
    . Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
    1.Execute transaction SM59 in the business system.
    2.Choose Create.
    3.Enter at least the following:
        1.RFC Destination: LCRSAPRFC
        2.Connection Type: T
        3.Description: <your description>
        4.Choose ENTER.
        5.Choose the Technical settings tab page and do the following:
        6.In the Program ID field under Registered Server Program, enter LCRSAPRFC
        7.This program ID must correspond to a program ID specified in the RFC engine settings of the SAP J2EE Engine on the Integration Server host.
    also create Rfc Destnamtion SAPSLDAPI like above.
    Maintain SLD access details in Transaction SLDAPICUST
    IN XI SYSTEM
    . Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
    1. Goto J2EE Engine
    2. Choose Cluster --> Server --> Services. JCo RFC provider
    3. Under RFC destination specify the following:
         Program ID: LCRSAPRFC
         Gateway Host: <Integration Server host>
         Gateway Service: <Integration Server gateway service>
         Number of process: 3
    4. Under Repository specify the following:
    Application Server: <Integration Server host>
    5. Choose Set.
    then u try ABAP proxies
    reagrds
    ajai

  • How to configure the Integration Builder connection Parameters

    Hi,
    If I leave the integration builder for a while, then I explore objects, the pop up message is:
    "Connection to server lost You can log on again once the server is available again Do you want to log on again?"
    I input password, some times regain the connection, most time not, then if not, I have to restart integration builder. I would like to know where I can adjust parameters to allow connection kept longer.
    Thanks
    Liang

    Hi, Swarup:
    Thanks for your reply.
    The reality here is that we could not get solid support from BSAIS team, we came to many situations that we have to search around and tell them how to do the job like this (They are all afraid of Java Stack
    I will keep search, if you have detailed information how to and where to configure those parameters, please let me know.
    Regards!
    Liang

  • Business Systems not appearing in the Integration Builder (Configuration)

    Hi Experts,
    I have created new business systems in the Integration Builder of my PI System.
    This is not appearing in the Integration Builder.
    I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
    Thank you.
    Thanks
    Kasee

    Business system from SLD not visible in Integration Directory

  • Problems with starting the Integration Builder

    Dear all
    We've installed PI 7.0 as a part of a project, and have some consultants working in the integration builder and rwb.
    Recently the we are unable to start the Integration Builder, and we get an error message prompting: "Unable to launch the application"
    The Builder has worked flawlessly earlier, and the problem have suddenly appeared during the last week.
    The Java error is:
    com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
         at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
         at com.sun.javaws.Launcher.downloadResources(Unknown Source)
         at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
         at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
         at com.sun.javaws.Launcher.launch(Unknown Source)
         at com.sun.javaws.Main.launchApp(Unknown Source)
         at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
         at com.sun.javaws.Main$1.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.io.FileNotFoundException: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
         at sun.reflect.GeneratedConstructorAccessor2.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
         at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
         at com.sun.deploy.net.BasicHttpRequest.doGetRequest(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
         at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
         at com.sun.javaws.Launcher.downloadResources(Unknown Source)
         at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
         at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
         at com.sun.javaws.Launcher.launch(Unknown Source)
         at com.sun.javaws.Main.launchApp(Unknown Source)
         at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
         at com.sun.javaws.Main$1.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.FileNotFoundException: <serveradress>:<port>/dir/directory/iaik_jsse.jar
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at java.net.HttpURLConnection.getResponseCode(Unknown Source)
         ... 18 more
    Does anyone have a clue or answer to this strange problem?
    Regards
    Andreas

    Hi,
    Refer this thread;
    Unable to Open Integration Builder
    https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
    Regards,
    Nithiyanandam

  • Created invalid WSDL with the Integration Builder Wizard

    Hello altogether,
    I'm sitting on a WSDL to Proxy scenario and therefore I created a WSDL file with the help of the Integration builder wizard and the how to guide. I created the URL after the standard scheme:
    http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?channel=:<service>:<channel>
    So my URL looks like the following:
    http://pimachine:50000/XISOAPAdapter/MessageServlet?channel=:GetSapFunctionAsyncOut:SOAP_SENDER_TEST_SimpleObjectMessage
    As service I inserted my outbound interface and as channel I inserted my sender adapter in the url. But if I try to call the WSDL with xmlspy I got the following mistake:
    "HTTP error: could not post file... on server pimachine(500)."
    and after that another window pops up with the message:
    "Error sending the SOAP data"
    Can anyone of you help me with that problem?
    kind regards
    Marcus

    Hello Manisha,
    I already tried it and it works. He first asks for my password and after that I got the following prompt in the Internet Explorer:
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.adapter.soap.web.MessageServlet (Version $Id: //tc/xpi.adapters/NW07_04_REL/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of $Proxy45_10002
    ModuleProcessorRemote not instantiated
    regards
    Marcus

  • Error during launching the integration builder

    Hi
    I installed XI3.0 SR1 as for the installation guide.When i am accessing the Integration builder during Java webstart ,i am getting the following error after launching during Java Web start
    <b>An error occurred while launching/running the application.
    Title: Integration Builder
    Vendor: SAP AG
    Category: Launch File Error
    JAR resources in JNLP file are not signed by same certificate</b>
    Can anyone figure out error urgently.
    regards

    Hi Usman,
    Have a look of the following thread:
    <b>Integration Builder doesn't start after SP11 </b>
    Integration Builder doesn't start after SP11
    and this one for more details:
    http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html#213
    Cheers,
    Rob.
    Message was edited by: Rob Viana

  • How can I change the color of the Integration Builder?

    Watch this blog: /people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
    While reading this blog I notice that the IB is of a different color. I would like to use this feature to differ my systems by color. How can I change the color of the IB?

    hi,
    you can always try <b>the Felix's way</b> )
    /people/sap.user72/blog/2005/12/11/how-to-apply-themes-in-exchange-infrastructure
    is that what you need?
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • No Connection to Integration Builder

    I have connected one our SAP Systems to our XI system in the XI technical and business landscape.
    Whats weird is that when I log into the system that is connected and try to run the transaction sproxy, I get a message saying that there is no connection to the integration builder.
    I do now know how to proceed.
    Thoughts anyone?

    Hello
    I have a similar problem. I am trying to configure my Application System (not XI) so that SPROXY works.
    My systems are:
    - Application System asystem -> host = ahost, port = aport
    - Integration System isystem-> host = ihost, port = iport
    At first I opened http://<ahost>:<iport>/exchangeProfile. Because I received errors I went to "Connections" (http://<ahost>:<aport>/exchangeProfile/connection.jsp) and entered the connection parameter for my isystem.
    Afterwards my Exchange Profile was filled with the entries of my isystem. This means:
    com.sap.aii.connect.repository.name = ihost
    com.sap.aii.connect.repository.httpport = iport
    com.sap.aii.connect.repository.contextRoot = rep
    com.sap.aii.connect.integrationbuilder.startpage.url = rep/start/index.jsp
    Is this correct?
    Any help is appreciated
    Best regards
    Markus

  • SPROXY: No connection to Integration Builder (only local data visible)

    ¡Hola!
    When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
    I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server.  I also checked that the parameters in the Exchange Profile were correct.
    Transaction SLDCHECK is working ok.  The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
    In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
    1.  The address of the Integration Builder must be stored in the R/3
         System
         =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
    Result: OK: Address maintained
    2. The HTTP connection of the R/3 application server must function
    correctly
    =>Check with report SPROX_CHECK_HTTP_COMMUNICATION
    Result: HTTP communication functioning
    The following 2 steps return an error:
    3. The Integration Builder server must be running correctly
    =>Check with report SPROX_CHECK_IFR_RESPONSE
    Result: Integration Builder data not understood
    4. Proxy generation must correctly interpret the data of the
    Integration Builder
    ==>Check with report SPROX_CHECK_IFR_CONNECTION
    Result: Integration Builder data not understood
    I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system.   Can someone please help?
    Thanks and Regards,
    Carlos

    Carlos,
    Check Global Configuration data in R3  using TC : SXMB_ADM.
    You need to set values..Role of Business System : Application System and Corresponding Integration server details.
    Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
    Nilesh
    Message was edited by:
            Nilesh Kshirsagar

  • No connection to integration builder (Only local data visible)

    Hi,
    I am created Interface objects in IR but it is not reflected in SPROXY (ECC 5.0). It is showing like this no connection to integration builder (Only local data visible) please can you  help me necessary configuration.
    Regards,
    -Prabakar.A

    HI Prabakar,
    the Business System SM59 destinations LCRSAPRFC & SAPSLDAPI
      should have the Program IDs
    SAPSLDAPI _UNICODE.
    LCRSAPRFC_UNICODE
    See the online help for connecting Biusiness Systems
    [Connecting Unicode Business Systems|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
    see also
    [Connecting to the Integration Server|http://help.sap.com/saphelp_nwpi71/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm]
    Regards
    Kenny
    Edited by: Kenny Scott on Feb 25, 2010 5:02 PM

  • I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected. Please help me out!!

    I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!

    Assuming you entered the correct WiFi password for your network, see these articles:
    iOS: Troubleshooting Wi-Fi networks and connections
    iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • The launching time of integration builder is extremely longer

    Dear XI experts
    I will tell you our story.
    When I execute Demo examples (Chapter 5.1.3 Executing and Testing – XI 3.0 Demo Examples Configuration)
    We got the error “STRING_BAD_REF dump when starting BSP application”, I found out the solution : SAP Note Number : 869197
    We did upgrade to a 6.40 kernel patch level 48 as mentioned in the SAP note.
    After that, whenever I launch (start) the integration builder, it takes for ages.
    Between [login screen]
    http://static.flickr.com/56/117541396_db88ce7101_o.jpg
    And [integration builder launching screen]
    http://static.flickr.com/35/117541397_4bc79529e8_o.jpg
    Ironically the websites related to Java engine pop up as usual, such as SLD, Java start page and so on. Also after few minutes I can get the integration builder in front of my eyes. However, whenever I try to create objects or call some information from the server it also takes time.
    Which part do I need to look at in details?
    Thank you for your reading.
    I will appreciate your any comment.
    Regards,
    David

    I collect some posts related to my problem ( i think ).
    Slow response time
    Problems in RWB XI 3.0
    XI Running Very Slow
    XI Running Very Slow
    Performance Tuning
    Re: Performance Tuning
    Problems after Update to SP13
    Problems after Update to SP13
    Server Performance Declines
    Server Performance Declines
    Performance Analysis with Single Message
    http://help.sap.com/saphelp_erp2005/helpdata/en/42/e7bb8f7c9d3ee0e10000000a1553f6/content.htm
    Problems in RWB XI 3.0
    Mapping tool very slow after upgrade to SP15

Maybe you are looking for