Problems with starting the Integration Builder

Dear all
We've installed PI 7.0 as a part of a project, and have some consultants working in the integration builder and rwb.
Recently the we are unable to start the Integration Builder, and we get an error message prompting: "Unable to launch the application"
The Builder has worked flawlessly earlier, and the problem have suddenly appeared during the last week.
The Java error is:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.io.FileNotFoundException: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
     at sun.reflect.GeneratedConstructorAccessor2.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doGetRequest(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: <serveradress>:<port>/dir/directory/iaik_jsse.jar
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     ... 18 more
Does anyone have a clue or answer to this strange problem?
Regards
Andreas

Hi,
Refer this thread;
Unable to Open Integration Builder
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
Regards,
Nithiyanandam

Similar Messages

Problem with starting the Web Dynpro Application

Hello,
I have a problem with my web dynpro application, which is in our SAP Portal. We have three different systems (development, test, production). In production always the follewing error message occurs:
The URL https://zsil2401.servers.wacker.corp:9004/sap/bc/webdynpro/sap/ZPLM_EN_FORM_300MM/ was not called due to an error.
Note
The following error text was processed in the system P1A : is not a valid attribute type.
The error occurred on the application server zsil2401_P1A_04 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GETATTRIBUTE_RTTI of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: INIT_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: CREATE_FROM_STRUCT of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: IFWDR_RG_CTRL_HANDLE~INIT_CONTEXT of program SAPLWDR_RG_GENERATED_SRC_API
Method: IFWDR_INTERNAL_API~INIT_CONTEXT of program SAPLWDR_RG_PROXY_FACTORY
Method: CONSTRUCTOR of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
Method: IF_WDR_CLASSLOADER~GET_COMPONENT_CONTROLLER of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
Method: CONSTRUCTOR of program CL_WDR_DELEGATING_COMPONENT===CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Some User get this message also in test an development. What could be the reason?
Note: Nothing has changed in coding or context.....this error occurs without any changements
Thanks for your help
Best Regards
Martin

Hi,
May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
Aditya.

Start of integration builder takes several minutes

I have a similar problem as described in this topic.
Re: Visual Administrator Tool does not load 100%
When I start the integration builder it takes only a few moments until the logon dialog displays. But after entering the logon information it takes at least 5 minutes to load. And opening the first development object (interface, mapping etc.) takes also a few minutes.
I have this problem since updating my XI test system. Integration Builder of my XI prod system works fine.
XI Test:
XI Version: 3.0 SP 15
J2EE Version: 6.40 PatchLevel 100627.313
XI Prod:
XI Version: 3.0 SP 13
J2EE Version: 6.40 PatchLevel 88028.313
I have set the value MaxThreadCount to 150 as suggested in the thread mentioned. This has no effect on my problem. Of course the J2EE server was restarted.
I have no idea how I ca fix that problem.

> Hello Gil,
>
> OK, I've two things to mention:
>
> P4 protocol and bindHost. There were some problems
> reg. that, please refer to SAP Note: 883943. The
> bindHost value should be 0.0.0.0, especially, if the
> host has multiple network cards.
We have sp15 on our XIT and the problem with bindHost should be fixed. O course we have checked that. BindHost is set to 0.0.0.0 .
> JDK 1.4.2_10 is not recommended by SAP. Please refer
> to SAP Note: 716604. This JDK caused some problems
> during installation; the problems were related to
> database access.
>
We use java 1.4.2_10 on both systems, XIT and XIP. We had no problems during the installation. We had a going live check on our XIP 3 weeks ago. Java version was checked as ok.

Problem with starting OEM-agent on NT (clustered)

We have problem with starting the OEM-agent (9i) on Windows 2000. The Nt-server is clustered.
I have started the OracleAgent by the service screen. Everyting looks ok.
But, from the server where the OEM-console is installed I can't contact the
agent.
I stopped then the agent and started it by typing;
d:\oracle\ora92\bin\agntsrvc.exe
Than i get the error:
StartServiceCtrlDispatcher Failed with err 1063
Anyone an idea?
Thanks.
Klaas

Increate the virtual memory and try to start the service here:
SELECT START > CONTROL PANEL > ADMINISTRATIVE TOOLS > SERVICES
Joel Pérez

Created invalid WSDL with the Integration Builder Wizard

Hello altogether,
I'm sitting on a WSDL to Proxy scenario and therefore I created a WSDL file with the help of the Integration builder wizard and the how to guide. I created the URL after the standard scheme:
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?channel=:<service>:<channel>
So my URL looks like the following:
http://pimachine:50000/XISOAPAdapter/MessageServlet?channel=:GetSapFunctionAsyncOut:SOAP_SENDER_TEST_SimpleObjectMessage
As service I inserted my outbound interface and as channel I inserted my sender adapter in the url. But if I try to call the WSDL with xmlspy I got the following mistake:
"HTTP error: could not post file... on server pimachine(500)."
and after that another window pops up with the message:
"Error sending the SOAP data"
Can anyone of you help me with that problem?
kind regards
Marcus

Hello Manisha,
I already tried it and it works. He first asks for my password and after that I got the following prompt in the Internet Explorer:
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.adapter.soap.web.MessageServlet (Version $Id: //tc/xpi.adapters/NW07_04_REL/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of $Proxy45_10002
ModuleProcessorRemote not instantiated
regards
Marcus

Do I need XI system for the connection to the integration builder

Hi,
I have a problem which i couldn´t manage to solve with the help of existing threads.
I got the problem that I dont have a connection to the integration builder, I know thats not new, but i want to know if it is possible to create a connection without XI System Landscape, because our company doenst have this system?
Hope there are possibilities.
Thanks
Volker Weckbach

Okay, yes its not expressed clearly i think.
I´ll explain my problem a bit nearer. I´ve worked with the Enterprise Services Builder. Now the Enterprise Services Browser in the TA se80 says that there is no connection to the integration builder, do I need this connection to have access to the work i have done in the ES Builder? I want to do Serviceimplementation.
If this connection is necessary, is it only possible to realize that via XI?
Are there ways to implement the service in an other way, maybe via NetWeaver?
I´m sorry if it´s hard to understand me, but i have not much experience with ABAP programming, i have just started.
Thanks Volker

SPROXY - No connection to the Integration Builder

Hi,
While generating a ABAP Proxy the communication between R/3 system and XI 3.0 repository did not work; transaction SPROXY displayed the following error message, 'No connection to the Integration Builder, only local data is visible'.
Can someone please help me out.
Regards,
Jigisha

Hi,
I had the same problem and I have solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa

Can't start the Integration Repository or Directory

I am having problems starting the integration Repository and Directory.
Every seems ok... it starts the Java Webstart then continues to say it is downloading... maybe 15 seconds in, it then changes and says download stalled...
does anyone have any ideas?

Hi,
Proxy setting in IE options - connections -- lansettings
Error - you mensioned.. ihope
Are you using IE7??
if yes see the belowlink
IE7 - https://websmp206.sap-ag.de/~sapidp/002006825000000011242002E#q1
if no , then plz check the versions all should be same like javawebstart,jsdk and check the environment variables , class path..
Also check the netwrok working fine or not ..
see the below links also
Problem in starting Integration Repository
Problems with installing Java Sneak Preview
WAS 640 Upgrade to SP11
install error: J2E already exists
Regards
Chilla

Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

I have a problem with loading the PNG image

I have a problem with loading the PNG image from site. For ex. go to icefilms com and is starts to load png like crazy CPU is huge and you can not shut down Firefox at least a minute. This is not just in this site but whit any one whit lots of pictures.
Image from firefox: Picture [http://img836.imageshack.us/img836/9910/7312011103147pm.jpg 1] [http://img28.imageshack.us/img28/8505/7312011103249pm.jpg 2] [http://img706.imageshack.us/img706/5615/7312011103348pm.jpg 3 ][http://img827.imageshack.us/img827/8483/7312011103533pm.jpg 4]
This is my Task Manager [http://img217.imageshack.us/img217/5715/7312011103621pm.jpg 1]
- I try safe mode, same thing
-All addons and plugins are ok
Any idea why is this so big problem.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

Problem with mapping the Entity beans onto database tables

Hi,
I got a problem with mapping the Entity beans onto database tables. Here are what I did:
First Step:
asant capture-schema
Second Step:
capture-schema -driver com.pointbase.jdbc.jdbcUniversalDriver -dburl jdbc:pointbase:server://localhost/sun-appserv-samples -username pbPublic -password pbpublic -table APPLICANT -table APPLICANTSKILL -table CUSTOMER -table LOCATION -table job -table JOBSKILL -table SKILL -out build/agency.dbschema
The first step was fine. But, in the second step, I got the error message as follow:
using dburl:jdbc:pointbase:server://localhost/sun-appserv-samples
using username:pbPublic
using password:pbpublic
using driver:com.pointbase.jdbc.jdbcUniversalDriver
using schemaname:null
using output file:build/agency.dbschema
JDO71100: Failed to find a class. Verify that the class is available on your CLASSPATH
java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at com.sun.forte4j.modules.dbmodel.jdbcimpl.ConnectionProvider.<init>(Co
nnectionProvider.java:38)
at com.sun.jdo.api.persistence.mapping.ejb.CaptureSchema.main(CaptureSch
ema.java:130)
at com.sun.jdo.spi.persistence.support.ejb.util.CaptureSchemaWrapper.mai
n(CaptureSchemaWrapper.java:29)
Thanks for your help!

You need to add the pbclient.jar or some similar name like that, in the CalssPath.

Problem with starting Windows when W510 in docking station

When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
http://www.licko.cz/w510/100_1060.MOV
http://www.licko.cz/w510/100_1061.MOV
Why I have this problems? I have latest Windows and W510 updates.
Regards,
Lubomir Licko
Solved!
Go to Solution.

There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.

Problem with starting more than one SwingWorker

Hello
I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
SwingWorker1.construct
SwingWorker2.construct
SwingWorker1.finished
SwingWorker2.finished
Things go fine, but if the sequence is:
SwingWorker1.construct
SwingWorker1.finished
SwingWorker2.construct
SwingWorker2.finished
the ui-updates in SwingWorker1.finished is not done correctly.
Can anyone help me with this?

This is the point:
In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
Therefore, the solution!
Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
The finish method in this case is to update the gui when all iterations are finished.
There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

Problem with starting SAP Database ..

Hi,
I have a issue with starting the DB. the detailed log is attached below.
When I had a Performance issue, I had tried to stop the SAP instance and the DB.
But thats not stopped. So I have restarted the OS.
After restarting the OS the DB is not comming up.
Its throwing the following log
SQL*Plus: Release 10.2.0.4.0 - Production on Sat Nov 15 13:11:16 2008
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 2365587456 bytes
Fixed Size                  2057952 bytes
Variable Size            1191184672 bytes
Database Buffers         1157627904 bytes
Redo Buffers               14716928 bytes
Database mounted.
ORA-16038: log 4 sequence# 3468 cannot be archived
ORA-19502: write error on file "", blockno (blocksize=)
ORA-00312: online log 4 thread 1: '/oracle/TRQ/origlogB/log_g14m1.dbf'
ORA-00312: online log 4 thread 1: '/oracle/TRQ/mirrlogB/log_g14m2.dbf'
Please give me an solution to solve this issue.
Thanx & Regards,
Kumar

>ORA-16038: log 4 sequence# 3468 cannot be archived
the problem is your archive directory is full. take archive log backup or move old archive log files to another location.
follow Note 391 - Archiver stuck
Cheers,
-Sunil

Problems with starting the Integration Builder

Similar Messages

Maybe you are looking for