[SQLSTATE 42000][Error 4834] - SQL Agent Job failing

Hello,
I have started getting the below error message on a bulk insert job that has been running over several months.
Error is:
Executed as user: domain\svc_sql. You do not have permission to use the bulk load statement. [SQLSTATE 42000] (Error 4834). The step failed.
Domain\svc_sql is also service account for SQL Server. Both the SQL server and SQL agent are running under this account and it has sysadmin and bulkadmin privileges.
Bulk insert is from csv file in a folder for which domain\svc_sql has full permission.
I've now ran out of ideas.
Could anybody advise?
Many thanks,
Mohan

Hi Mohan,
According to the error message, it can be caused by that when SQL Server Agent performs EXECUTE AS USER, you are by default sandboxed into the database, and therefore you don't have access to server-level tasks.
To work around the issue, as Praveen’s post, you can set the database TRUSTWORTHY to ON, however it might cause some security issues. For more details, please review this article:
Giving Permissions through Stored Procedures Ownership Chaining, Certificates and the Problematic EXECUTE AS.
Personally, I recommend you create the bulk insert job as a CmdExec job which uses SQLCMD to run scripts. For more information about CmdExec job, please review this article:
Create a CmdExec Job Step.
There is also a discussion about the error 4834 in the following thread.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/48621876-11a0-468c-95b4-2a682f0134aa/bulk-insert-not-working-through-an-agent-job
Thanks,
Lydia Zhang

Similar Messages

SQL Agent Job Fails To Run A SSIS Package

Hi,
I have a SSIS Package which basically truncates the table and re-loads it from an excel file .The job runs fine if i run it manually on visual studio.However, i try to shcedule a SQL Agent job and it fails with the following error
Description: The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft
OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2014-10-22 14:47:41.15 Code: 0xC001002B Source: Package1 Connection manager "Excel
Connection Manager 1" Description: The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
I am exactly not sure what it means?
Can someone please help me with any suggestions on this.
Thanks.

Thanks for trying that option . It looks like there is an issue with the driver . Can you try to install/uninstall the driver once again from http://www.microsoft.com/en-us/download/details.aspx?id=13255.
You can try this URL , where he has the similar problem
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8a40d329-0611-44e2-ae51-3bd9b0901754/ssis-the-requested-ole-db-provider-microsoftaceoledb120-is-not-registered?forum=sqlintegrationservices
Please mark this as answer if this helps to solve your problem

Errors running SQL Agent Jobs for 64 bit SSIS packages on a 64 bit server, but Source server 32 bit

Hi,
I can able ran the SSIS package in BIDS, since set to false in Run64BitRuntime property.
Then I created SQL server Agent job I tried the following ways
Step 1:
Type is set as SQL Server Integration Services Packages,
Run as - SQL Server Agent Service Account
Package source - FileSystem
then Execution option tab I selected 32 bit runtime
and then run the job I am getting the below error
Message
Executed as user: CIT\svc_CS_SS2008Agent. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 7:29:17 AM Error: 2013-11-28
07:29:18.57     Code: 0xC0014020     Source: Example Connection manager "DataSource.DataExtract"     Description: An ODBC error -1 has occurred. End Error Error: 2013-11-28 07:29:18.57
Code: 0xC0014009     Source: Imports20_OAC_Gifts Connection manager "DataSource.DataExtract"     Description: There was an error trying to establish an Open Database Connectivity (ODBC) connection with the
database server. End Error Error: 2013-11-28 07:29:18.59     Code: 0x0000020F     Source: DFT_Example ODBC_SRC Example [11]     Description: The AcquireConnection method call to the connection
manager DataSource.DataExtract failed with error code 0xC0014009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2013-11-28 07:29:18.59
Code: 0xC0047017     Source: DFT_Example SSIS.Pipeline     Description: ODBC_SRC Example failed validation and returned error code 0x80004005. End Error Error: 2013-11-2
Step 2:
Type - Operating sytem (CmdExec)
Run as - Sql Server agent service account
Command - C:\Program Files\Microsoft SQL Server\110\DTS\Binn\dtexec.exe /FILE "D:\Example\Example.dtsx" /x86 /CHECKPOINTING OFF /REPORTING E
then run the job I am getting the below error
Message
Executed as user: MIS\svc_CS_SS2008Agent. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 6:37:58 AM Error: 2013-11-28
06:37:58.94     Code: 0xC0014020     Source: Example Connection manager "DataSource.DataExtract"     Description: An ODBC error -1 has occurred. End Error Error: 2013-11-28 06:37:58.96
Code: 0xC0014009     Source: Example Connection manager "DataSource.DataExtract"     Description: There was an error trying to establish an Open Database Connectivity (ODBC) connection with the database server.
End Error Error: 2013-11-28 06:37:59.01     Code: 0x0000020F     Source: DFT_Example ODBC_SRC Example [11]     Description: The AcquireConnection method call to the connection manager DataSource.DataExtract
failed with error code 0xC0014009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2013-11-28 06:37:59.07     Code: 0xC0047017
Source: DFT_Example SSIS.Pipeline     Description: ODBC_SRC Example failed validation and returned error code 0x80004005. End Error Error: 2013-11-28 06:37:59.12     Code: 0xC004700C
Source: DFT_Example SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2013-11-28 06:37:59.16     Code: 0xC0024107     Source: DFT_Example
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1).Started: 6:37:58 AM Finished: 6:37:59 AM Elapsed: 1.373 seconds. Process Exit Code 1.
The step failed.
Note:
My source server is 32 bit and development environment in 64 bit
if anybody have idea please share your knowledge

Hi BIRam,
Based on the current information, the issue may be caused by the factor that the SQL Server Agent Service Account doesn’t have access to the MySQL server. Try to create a SQL Server Agent Proxy account that has sufficient permission on the MySQL server.
In addition, also pay attention to the package protection level setting.
For more information, please see:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/e13c137c-1535-4475-8c2f-c7e6e7d125fc/how-do-i-troubleshoot-ssis-packages-failed-execution-in-a-sql-agent-job?forum=sqlintegrationservices.
Regards,
Mike Yin
TechNet Community Support

SQL Agent Job failing - not using credentials in the config file for Data source

Hi
We have an SSIS pkg, that is secheduled as SQL Agent job using proxy account. The pkg contanins data source for connecting different SQL servers and the proxy account do not have access to the external DBs. The data source credentials are stored in the Config
file.
Why the job is not using the credentials in the config file and try to use the proxy account and failing.
Do the proxy account need access to all the external dbs in the pkg, and then what is the purpose of the config file.
I am sorry, i am not SSIS person trying to understand. If any one can explain tha will be great!!
Thank you!
VR

Please take a look at these URLs:
Schedule a Package by using SQL Server Agent
SSIS package does not run when called from a SQL Server Agent job step
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

SQL Agent Job fails due to excel import

I have SQL SERVER 2012 SP 1. I have a package which imports a generic spreadsheet into a import table and then does does other stuff with it.
I can happly run the SSIS package through BIDS but fails when I try and run it though SQL agent.
with errors such as Microsoft.ACE.OLEDB.12.0. Provider is not registered on this machine.
Within the SSIS I use the Excel connection manager and have modifed the string to
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=D:\FileDropTest\Fusion.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;IMEX=1";
and re deployed and still get the same issue.
I then enabled xp_cmdshell and tried from TSQL
DECLARE @Qry VARCHAR(8000)
SELECT @Qry = 'dtexec /FILE "D:\SSIS\export\Fusion.dtsx"'
EXECUTE xp_cmdshell @Qry
and got
output
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.5058.0 for 64-bit
Copyright (C) Microsoft Corporation. All rights reserved.
NULL
Started: 5:49:25 PM
Error: 2015-02-09 17:49:25.43
   Code: 0xC001000E
   Source: Fusion
   Description: The connection "{3076028A-D7D9-4432-AADB-CAC6D9AD5995}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
As a different approach it was recommended to use OLEDB however within BIDS I the connection tests fine but when I run it though BIDS it fails
[OLE DB Source [79]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "D:\FileDropTest\Fusion.xlsx" failed with error code 0xC0202009. There may be
error messages posted before this with more information on why the AcquireConnection method call failed.
For refrence I ve also set the delay to true.
I'm a bit stuck as I thought importing a spreadsheet being Microsoft product ;) would be fairly easy . Any Help on this matter would be great.

If your source Excel file is .xls, it should successfully import it. However in your case Excel file is .xlsx hence it fails.
>> I can happly run the SSIS package through BIDS but fails when I try and run it though SQL agent.
with errors such as Microsoft.ACE.OLEDB.12.0. Provider is not registered on this machine
Your local server where you run the package in BIDS have the 32 Bit ACE OLEDB 12.0 driver installed correctly.
But the target server where you run the package thorugh SQL Agent has no correct driver. Please download
32 bit Microsoft Access Database Engine 2010 Redistributable and install it in Target server.
>> I then enabled xp_cmdshell and tried from TSQL and got errors "Connections collection when the specific connection element is not found"
Please look at the connection managers in your package. There has to be some connection manager where name is missing. This may happen if you copy paste connection from same or another ssis package.
-Vaibhav Chaudhari

Sql Agent Job Failed after changing job name to sa Error(The job owner does not have access )

I changed job owner to sa and it worked well, But now it fails saying job owner does not have sever access and shows job owner as previous owner Name even after it changed to sa?
Help......

EXEC msdb.dbo.sp_update_job @job_id=N'7d4d4040-b79c-4022-9d19-e449497ab60e',
@owner_login_name=N'sa'
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Executed as user: ADMIN\abc-SQLServer. Linked servers cannot be used under impersonation without a mapping for the impersonated login. [SQLSTATE 42000] (Error 7437). The step failed.

Hi All,
We have verified permissions on both sides,current server and linked server, the user has sysadmin.
Another key piece of information is that this is happening when executing a SQL Job.
Thanks.

Related:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/328616e9-42cb-40d7-a4b1-671d6a492d8f/linked-servers-cannot-be-used-under-impersonation-without-a-mapping-for-the-impersonated-login?forum=sqldatabaseengine
https://support.microsoft.com/kb/2492477?wa=wsignin1.0
http://sshakespeareblog.co.uk/2013/07/31/sql-linked-server-and-sql-server-agent/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

LcsCDR & QoEMetrics Purge and Usage Summary SQL Agent Jobs

Hello.
On our SQL instance that hosts the LcsCDR & QoEMetrics databases I have the following SQL Server Agent Jobs:
LcsCDR_Purge
LcsCDR_UsageSummary
QoEMetrics_Purge
QoEMetrics_UsageSummary
I'd like to know if anyone else has these same jobs on their instances as it's unclear looking at the job descriptions, when they were created, and the code they run if these are part of the core Lync system or something that has been set up randomly
afterwards.
One thing I do know is that these jobs don't work correctly when you use database mirroring. I will elaborate on this if/when I can find out any more information about them first.
Thanks

Thank you for the reply.
The problem with these jobs is that when they attempt to run against a database which is a mirror, it causes the job to fail. That would not seem to be a big deal right, except our policy (and many other SQL shops I imagine) is to send e-mail notifications
each and every time a SQL agent job fails on any server, not just those associated with Lync.
As it stands these jobs are not configured on either the principal or mirror server to notify anyone as I’d get an e-mail every hour on the hour from the mirror server telling me that a job has failed (even though it didn’t actually need to do anything
) giving the impression something is wrong somewhere. This is quite a common trap to fall into with SQL Agent jobs and database mirroring.
Remember that because as Lync uses automatic failover either server could be the mirror at any given time so there is no mileage in setting the e-mail notifications on just the server that is currently the principal.
What this job should do then is when it attempts to run on the mirror, check if it’s the mirror first and if it is then do nothing instead of failing each time. This will enable e-mail notifications to be set up on the jobs on both servers, so when
the job fails we know there is potentially a genuine problem to be investigated.
Each job contains two steps, I’ll use the QoEMetrics_UsageSummary as the example.
The code in step 1 is this, which causes the job to error out if it is attempting to run against the mirror.
declare @_MirroringRole int
set @_MirroringRole = (
select mirroring_role
from sys.database_mirroring
where database_id = DB_ID('QoEMetrics')
if (@_MirroringRole is not NULL and @_MirroringRole = 2) begin
raiserror('Database is mirrored', 16, 1)
end
else begin
print ('Database is not mirrored')
end
I re-wrote this job to run in one-step like this, which runs from the master database, which as I mentioned above doesn’t make the job error out when it realises it’s trying to run against a mirror.
DECLARE @_MirroringRole INT
SET @_MirroringRole = ( SELECT mirroring_role
FROM sys.database_mirroring
WHERE database_id = DB_ID('QoEMetrics'))
-- if this is not a mirrored database or it's the principal, attempt to run usage summary op
IF (@_MirroringRole IS NULL OR @_MirroringRole = 1)
BEGIN
DECLARE @_Sql NVARCHAR(4000)
SET @_Sql =
'USE [QoEMetrics];
DECLARE @_UpdatingSkipped INT
EXEC dbo.RtcRegularMaintainDatabase @_UpdatingSkipped = @_UpdatingSkipped output'
EXEC (@_Sql)
END
ELSE -- if the database is a mirror, don't do anything
BEGIN
PRINT 'there is nothing to do, the database is a mirror'
END
The same logic can be applied to the other 3 jobs and I was intending to suggest it as a connect item, except there doesn’t seem to be a section for Lync so I will contact product support and see what they think.
Thanks again.

Notify more than 1 operator in a SQL Agent job

Hi Forum,
is there a way to notify more than one operator if a SQL Agent job fails?
TIA
Alex

Hello Alex,
If you are using a "maintenance plan" task "Notify operator" you can select several operators from a list.
In a SQL Server Agent job itself you can only add several operator for "warnings", but for the notifications like "finished" just one.
Olaf Helper ----------- * cogito ergo sum * errare humanum est * quote erat demonstrandum * Wenn ich denke, ist das ein Fehler und das beweise ich täglich http://olafhelper.over-blog.de

SQL Server Agent job fails with error : The package execution returned DTSER_FAILURE (1).

Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.

The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Sql server agent job failing to connect excel connection manager of SSIS package by 32-bit mode run time

I am unable to succeed with sql agent job, I am trying to execute the SSIS package through sql agent job by ticking 32 bit runtime check box in 64 bit machine , even it does not worked..
could any one helpme on this?
Source: Excel Load Connection manager "Excel Connection Manager"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class
not registered". End Error TS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error
messages posted before this with more information on why the AcquireConnection method call failed. End... The package execution fa... The step failed.

Hello Keerthi,
Can you please modify settings and set delay validation for Excel connection manager? I think its validating connection and failing because it might be picking that from some variable.
Alternatively, please run package using below and see what happens.
EXEC master..xp_cmdshell 'DTEXEC.exe /SQL "Folder\Package" /SERVER Servername'
I will recommend you to follow steps in below link.
http://www.sqlhammer.com/blog/running-ssis-packages-in-32-bit/
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Error with SSIS package running as SQL Agent job

I have a strange issue.
I have a SQL Agent job that execute 5 steps, each step is an SSIS package that imports a CSV file to a temp table, then executes a SQL script to update a production table.
This job runs every 3 mins, every day, and has been for over a year.
Every once in a while it will start failing on step 2. Sometime it only happens for a couple of runs, other times I have to restart the SQL server. Once it corrects itself, it could be months before it happens again, but usually happens every
few weeks.
The error in the job history is: "Unable to bulk copy data. You may need to run this package as an administrator"
Obviously I have all the permissions correct, as it was running successfully every 3 mins before this error suddenly starts. I'm at a loss as to what the problem is. It is always on step 2, which is identical to step 1 except its a different CSV file
going to a different table. As I typed this, it failed twice, then was successful afterwards.
Any ideas where to look for further information? I've checked the event viewer and looked in the SQL logs, nothing stands out at this time.

Hi Kerberos35,
It seems to be caused by the UAC feature which makes SSIS use the low-permissions token of the administrator Windows account under which the job runs. This issue is described in the following KB article:
http://support.microsoft.com/kb/2216489/en-us
To resolve the issue, you can install the latest service pack for your SQL Server. To work around this issue, you can also use one of the following two methods:
Method 1: Replace the SQL Server Destination components in the Data Flow Tasks that are failing with OLE DB Destination components that point to the same SQL Server connection manager.
Method 2: Create a SQL Server Agent proxy by using a Windows account that is not a member of the local Administrators group after you assign Create Global Objects permissions to that account.
To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Local Security Policy.
Expand Local Policies, and then click User Rights Assignment.
In the details pane, double-click Create global objects.
In the Local Security Policy Setting dialog box, click Add.
In the Select Users or Group dialog box, click the user accounts that you want to add, click Add, and then click OK two times.
Regards,
Mike Yin
TechNet Community Support

How to retrive error message for sql agent job failure

My sql server agent job failed and didn't store any error message in the job history. Is there any other table from where I can get the error info????
The job has sql_message_id = 16389 and sql_severity = 16. What does they mean????

this link will solve your problem
http://www.sqlservercentral.com/articles/SQL+Server+Agent/67726/
ebro
CREATE PROCEDURE pr_GetStepFailureData
@JobName VARCHAR(250)
AS
This procedure gets failure log data for the failed step of a SQL Server Agent job
DECLARE @job_id UNIQUEIDENTIFIER
SELECT @job_id = job_id FROM dbo.sysjobs WHERE [name] = @JobName
SELECT 'Step ' + CAST(JH.step_id AS VARCHAR(3)) + ' of ' + (SELECT CAST(COUNT(*) AS VARCHAR(5)) FROM dbo.sysjobsteps WHERE job_id = @job_id) AS StepFailed,
CAST(RIGHT(JH.run_date,2) AS CHAR(2)) + '/' + CAST(SUBSTRING(CAST(JH.run_date AS CHAR(8)),5,2) AS CHAR(2)) + '/' + CAST(LEFT(JH.run_date,4) AS CHAR(4)) AS DateRun,
LEFT(RIGHT('0' + CAST(JH.run_time AS VARCHAR(6)),6),2) + ':' + SUBSTRING(RIGHT('0' + CAST(JH.run_time AS VARCHAR(6)),6),3,2) + ':' + LEFT(RIGHT('0' + CAST(JH.run_time AS VARCHAR(6)),6),2) AS TimeRun,
JS.step_name,
JH.run_duration,
CASE
WHEN JSL.[log] IS NULL THEN JH.[Message]
ELSE JSL.[log]
END AS LogOutput
FROM dbo.sysjobsteps JS INNER JOIN dbo.sysjobhistory JH
ON JS.job_id = JH.job_id AND JS.step_id = JH.step_id
LEFT OUTER JOIN dbo.sysjobstepslogs JSL
ON JS.step_uid = JSL.step_uid
WHERE INSTANCE_ID >
(SELECT MIN(INSTANCE_ID)
FROM (
SELECT top (2) INSTANCE_ID, job_id
FROM dbo.sysjobhistory
WHERE job_id = @job_id
AND STEP_ID = 0
ORDER BY INSTANCE_ID desc
) A
AND JS.step_id <> 0
AND JH.job_id = @job_id
AND JH.run_status = 0
ORDER BY JS.step_id
EXEC pr_GetStepFailureData 'JobName'

Error while backup -- Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3202

Hi,
I am not able to take my sql backup due to the following error.
This error is comming after one hour form starting the backup
Could you suggest me why my sql is throwing this error and how to resolve?
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3202: [Microsoft][ODBC SQL Server Driver][SQL Server]Write on 'G:\DEV_1.BAK' failed, status = 33. See the SQL Server error log for more details.
[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.
Regards,
Gayathry.

As far as i can see this is usually and error that shows up when you have some sort of I/O, media or hardware failure.
I'll recommend you to check this before resuming
Regards
Juan

Sql agent job getting file access denied error

I'm not sure if this question belongs in this forum. Please move it if you want to.
Here is my question. I have an ssis package that is running into an error at the file system task trying to move a file. The package is deployed to the catalog and I am running the package using the stored procedure
[SSISDB].[catalog].[start_execution] @execution_id
When I execute this stored proc in Management Studio while logged in under a sysadmin, everything works fine. But when I call the same TQL in SQL Agent job, I get a file access denied error. This has something to do with the id that is getting used
to run the package and I am not sure how to track that down. Any help would be appreciated.
I've check the windows permission on both the id that is running the SQL Agent and SQL SSIS Service. Both seem to have the right windows permission.

Please see:
http://support.microsoft.com/kb/918760

[SQLSTATE 42000][Error 4834] - SQL Agent Job failing

Similar Messages

Maybe you are looking for