Stock in transit as on date

Dear Freinds,
I am trying to develop a report which gives me the stock in transit as on a particular date.
Can anybody please suggest me the appropriate table/infostructure to find this information.
Helpful answers will be rewarded!!!
Best Regards,
Arahanth

I am trying to find out the stk in tras as on a particular date say..04.05.2006 for which the material is already delivered
The manangement wants to know the stock in transit for a particular date.....

Similar Messages

Stock in transit to be removed

Hi,
We have stopped using One of our plant. We have cleared all plant stock but now we observe we have some stock stuck in the in-transit category. We dont want to or cannt receive tht stock in plant.
How we can get rid of this stock in transit?
Thanks
Akkshaya

Hi,
Please refer to the SAP note 392205,
Symptom
SAP Support: Please read the remark to the note!
o Goods receipt for stock transport orders cannot be posted as the
system reports a deficit in the stock in transit (Message M7
021/022).
o Materials show stock in transit although there are no longer any
open stock transport orders.
Caution:This note only refers to real stock in transit and not to
virtual stock in transit in cross-company stock transport orders.
Counter-indications
The procedure in this note (movement types 557 nd 558) must not be followed
to "correct" genuine database inconsistencies in the stock in transit
which, for example, have arisen due to incorrect updates. Proceed as in
Note 32236.
Additional key words
Stock transport order, stock transfer, MARC-TRAME, MSSA-SATRA, MSSQ-SQTRA,
stock in transit, TRAME, M7021, M7022, MvT557, MvT558, 557, 558,
correction, MMINKON
Cause and prerequisites
The R/3 system is designed so that the stock in transit can only be posted
through stock transport orders (creation during goods issue, reduction
during goods receipt).
Purchase order and material master record can have different units of
measure. The purchase order is then closed when the goods issue quantity
and quantity of goods received are the same in order unit. However, in the
material master record, the stock in transit is managed in the base unit of
measure.
On account of system-dependent and program-internal rounding effects which
cannot be avoided, the open stock in transit quantities in order unit and
in base unit of measure might not balance to zero at the same time.
Example 1
Stock transport order over 100 pallets. Conversion factor 1 kg = 3
pallets.
Goods issue in one step: 33.333 kg are posted to the stock in
transit (quantity fields of the material master record have an
accuracy to three decimal places in R/3).
Partial goods receipt over 50 pallets. It reduces the stock in
transit by 16.667 kg.
A second partial goods receipt over the still outstanding 50
pallets fails as only 16.666 kg remained in the stock in transit
30.08.2008 Page 2 of 5
Note 392205 - Analysis of stock in transit/correction for split valuation
but 16.667 kg should be booked out again.
Example 2
Stock transport order over 1 pallet, conversion factor 1 pallet =
10000 pieces. In the material master record, an alternative unit of
measure 'Carton' is managed (conversion factor: 1 carton = 1234
pieces).
During goods issue, 1 carton is now entered. As there is a
conversion only from the carton unit of measure to the piece base
unit of measure, the system first converts to 1234 pieces. These
are then converted into order unit of 0.123 pallets via the factor
of the purchase order. The system now posts 0.123 pallets and 1234
pieces.
A goods receipt over 0.123 pallets (default quantity and unit) is
now executed over 1230 pieces and leaves 4 pieces in the stock in
transit.
Solution
Organizational solution
You can avoid the effect if you use the stock transport order according to
the business idea that it is based on. A corresponding goods receipt should
be posted for every goods issue.
Goods issues in N substeps and goods receipts in M substeps with N < > M or
non-corresponding quantities/units do not match the business process
intended for stock transport orders.
Correction of the stock in transit without purchase order
reference
Note 389484 makes movement types 557 and 558 available. These are derived
from the class of the scrapping movement types and can post the stock in
transit without purchase order reference. For actually visible
problems, excess stock in transit can be removed or missing stock in
transit can be created with this.
A report is attached to the current note; this report tries to explain the
stock in transit using the documents existing in the system.
Prerequisites
This report requires that program RM07APP1 exists in your system and date
"12.01.2001" is contained at the program start in the comment block. If
this is not the case, the program is to be updated by importing the
transport mentioned in Note 198596.
Notes on use of the analysis report
The analysis report uses the documents existing in the system (purchase
order history records and material documents) to explain the stock in
transit.
The data is displayed on four levels:
o Documents
Material documents which posted to the stock in transit. The
quantity is displayed in order unit and base unit of measure.
If you want adjustment documents to be taken into account on the
initial screen of the report, the system only displays the base
30.08.2008 Page 3 of 5
Note 392205 - Analysis of stock in transit/correction for split valuation
quantity for these.
o Purchase order item
The data of the purchase order item results through summation of
the material documents. Here, you find the open quantity in order
unit, the expected open quantity in stock in transit which results
from this by means of the item conversion factors as well as the
quantity actually posted in stock in transit.
Adjustment documents are allocated with purchase order number
'Correction'.
o Valuation type
The total of the expected open stock in transit quantity is
compared with the quantity actually posted; in the case of
differences these are displayed separately.
If these differences are the same as the differences which led to
the execution of the report, adjustment postings can now be
executed with movement types 557 and 558.
Quantities displayed as positive (green) indicate a surplus in the
stock in transit which should be booked out with 557. Apply
analogously "negative/red/558".
The correct valuation type is to be used for split valuated
materials during the correction (see below).
o Material/plant
Here, the stock in transit calculated through the documents is
compared with the stock in transit contained in the database in
order to check that the documents are sufficient to explain the
existing stock in transit.
On the initial screen of the report, you can choose up to which level the
list is displayed first. By double-click, a detailing of the summarized
display is possible.
There are direct jumps to the display of material documents (double-click
on material document number or item) and purchase orders (double-click on
purchase order number or item).
The report can recognize warning and error situations which are output in
column 'Status'. Every message is identified by an X in a different column.
The system outputs the messages in text format with explanations when you
click on the status column.
If documents were archived (purchase orders and/or material documents),
remaining stocks in the stock in transit which did not result through the
remaining documents can no longer be explained. In general, this has the
effect that the report shows an error concerning variances in stock in
transit on material level.
In the ideal case, it should only be possible to explain the stock in
transit through the open purchase orders which cannot be archived. Without
selection of the adjustment documents, the report only shows the situation
resulting from the open purchase orders. Then, adjustment postings cause a
change of the posted stock in transit on material level (as the adjustment
30.08.2008 Page 4 of 5
Note 392205 - Analysis of stock in transit/correction for split valuation
documents are not selected).
Conclusion: During analysis without adjustment documents, there should be
no differences between posted and existing stock in transit on material
level.
If batch-related quantity conversions are used (active ingredient
management and product units of measure), the expected stock in transit
which results from the open purchase order quantity cannot be calculated
correctly. The report uses the conversion stored in the purchase order item
which represents the planned factor.
Conclusion: If this procedure is used, the results of the report only make
sense if the purchase orders which are below a hierarchy level show all an
open quantity of zero in order unit.
It is not useful to execute the report periodically and to execute a blind
posting for the shown differences. The results must be checked for
plausibility.
Special features of movement types 557 and 558
o These movement types should only be used to correct the stock in
transit in specific cases. A regular use in order to achieve new
business processes is not wanted.
o The movement types must not be copied for technical reasons!
o Do no longer use the modified movement types Z05 and Z06 created
with Note 181297. However, do never delete the entry in
table T156M which was created for this note
(Recommendation was ZEU1).
CAUTION --- CAUTION --- CAUTION --- CAUTION
Due to historic reasons, the data model of R/3 is incomplete concerning
material with split valuation in the stock in transit (the stock in transit
is managed independent of valuation types but already belongs to the
valuated stock which is managed with the exact valuation type).
The direct posting of the stock in transit for material with split
valuation can cause database inconsistencies which cannot be checked during
the posting with movement types 557 and 558. For the time being, the use of
the movement types for split valuated material is not possible and leads to
error message M7048 (Use one-step procedure for transfer posting to mat.
subj. to valuation).
It is possible to deactivate this error message by entering message
category ' ' (blank character) in message Customizing of the inventory
management.
After you have executed the required corrections, the message has to be set
to category 'E' again to prevent end users from causing damage with the
movement types.
Regards
Merwyn

Stock in transit report with delivery # and date included

I need a report similar to MB5T that will also show the delivery number and goods issue date. I couldn't find anything standard and was going to ask an ABAPer to create something. When researching where stock in transit is stored, I keep finding that the value should be in MARC-TRAME; however, in our system that value is blank (even for a material that shows stock in transit in MB5T.) Is this value stored in another location as well?
Thanks in advance for your help.

Thanks for the response. I know that I can view the PO history by going into the individual POs, but we want something that will show all of the POs at once without having to click in each individual one.
Thanks!

Seeing Stock in transit details by using MB5T by date wise

Hi all
Are we able to see stock in transit (T.Code: MB5T) report by date wise.
Reagards
Srini

Hi,
You will not get stock in transit details as per date in MB5T.
Use Report MB5B and here in selection screen, input the "Selection Date" and "Non-Hierarchical Display" option and execute the report.
And in output, view the column of "Stock in Transit"

Stock in transit on a particular date

Hi Gurus,
Can you please tell me how to take stock in transit on a particular date (past date and not on current date).
Thanks & Best regards

hi
Check thease reports
Use MB5T - for Stock in transit
You can use MB52 also which will display the materials in transit based on group.
V_UC_7 - Incomplete Inbound Deliveries
VL06I - Inbound Delivery Monitor
VL06IG - Collective Processing Via Inbound Delivery Monitor
Regards
Vishal

Stock in transit for a particular date

Hi all,
How to find the stock in transit for a particular date.
In MB5T date option is not available.
Is there any other way or i need to gofor Z development.
Kindly help me in this regard.
Regards
KK

Try MB5TD. Please also check OSS notes 1120843, 1268193, 925384.
Edited by: Csaba Szommer on May 22, 2009 8:28 AM

On order Stock and stock in transit with date variable

Hi experts.
İt may be an easy question.
We need to see on order stock (menge,can be seen T code MMBE) and stock in transit(T CODE MB5T) with date variable.
Any T code or table...?
I mean that for exp: on order stock and sttock in transit on 02/02/2012..
Thanks in advance..

Hi,
as per my knowledge you have to develop report using following table
how many Po closed for material
how many MIGO happens and how many remain etc
table EKPO
EKKE
EKBE
MSEG
MKPF
[Report|http://wiki.sdn.sap.com/wiki/display/ERPLO/SAPStandardReports]
[tables req to get date wise stock report;
Regards
Kailas Ugale

Stock in transit data

From which table can i pull the previous months stock in transit data.. I looked in MARC.. but the fields are not getting updated.
I want to know where my SAP Client is storing the stock in transit data.
Give me an example scenario where i can do a stock transfer movement in migo or mb51 followed by the table where i can look in for to see changes done to that specific material
Thanks

are you talking about the internal trasfers or trasit stock created during the other transactions like post goods issues like inter companuy po deliverries? or isssues during sub contracting trasfers to vendor.
check MB5T .fronm there you can dig the field and table.
Regards,

Report for stock in transit datewise

I need stock in transit datewise. Is there any report possible for that ? Which table and fields should I refer. please revert.
Regs,
Appie

Hi,
T.Code: MB5T can be used for Report for stock in transit, but date wise u can't get here. U have to develop areport or by querry u can develop a report.
U can get date (MKPF-BUDAT) wise details by giving movement type in MSEG table u get all the details in the tables.
Regards,
Chinna

Opening Closing Stock in transit Report

Hi,
I have to get the ABAP development of Stock Report. Report would have following fields
Opening Stock
Opening Stock in Transit Quantity
GR Quantity
Purchase Value
Sold Quantity
Rejection Quantity
Closing Quantity
Closing Stock in Transit Quantity
Consumption Quantity
In Closing quantity , It should be without stock in transit quantity.
Could you please help me to understand ,Exact Opening Stock ,Closing sock, In Transit Stock etc? How would these be calculated? from which tables all these data would come from. Thanks in advance.
Regarda,
Santosh

SantoshArya wrote:
Hi,
>
> I have to get the ABAP development of Stock Report. Report would have following fields
>
> Opening Stock
> Opening Stock in Transit Quantity
> GR Quantity
> Purchase Value
> Sold Quantity
> Rejection Quantity
> Closing Quantity
> Closing Stock in Transit Quantity
> Consumption Quantity
>
> In Closing quantity , It should be without stock in transit quantity.
>
> Could you please help me to understand ,Exact Opening Stock ,Closing sock, In Transit Stock etc? How would these be calculated? from which tables all these data would come from. Thanks in advance.
> Regarda,
> Santosh
Hi,
You can also check these standard reports before you proceed to develop a report..
MB52 - List of Warehouse Stocks on Hand
MB53 - Display Plant Stock Availability
MB5B - Stocks for Posting Date
MB5C - Pick-Up List
MB5L - List of Stock Values: Balances
MB5W - List of Stock Values
MB5T - Stock in transit CC
MC.9 - INVCO: Material Analysis Selection, Stock
MC.A - INVCO: Material Analysis Selection, Rec/Iss
MC.B - INVCO: Material Analysis Selection, Turnover
You can also consider building a query report which wil also serve your purpose quickly...
Regards
Shiva

Stock Report as on any date.

i am developing a stock report as on any date where i have to get the closing stock of unrestricted blocked and transit stock as on any date.
i have taken a table mkpf and mseg to get the quantity and date.
i am not getting what all movement type i should use to get the closing stock for unrestricted blocked and transit and what method i shoud use?
please help me out.

Jairaj Kumar ,
Your Report is Little bit complex and time consuming as well.We did a Report same as like you but not Special Stock (means for all of Stock).
For Closing Balance Which will be Opening Balance of next perio/ next day , can be calculated based on DEBIT / Credit inidcator available in the table you are using. This will used of calculate Stock balance. along with movement type for date range.
Hope this will give some info about for ur requirement. Note refer to Tcode MB5L for reference.

Error: PL Stock in transit exceeded by 112 SU

Hi all,
While doing MIGO, I get error message while trying to post goods receipt: "PL Stock in transit exceeded by 112 SU : XXXX (Material) XXXX (Plant) XXXX (Storage locaion)"
I have checked in MB5T transaction but it shows - 'List contains no data'
What can i do to solve it.
Awaiting for kind repy.
Thank you!!

hi ,
i have a similar prob:
the scenario is as below:
Interplant movt from 1 plant to another with stock transport order (SA)
qty 154 ea issued at the supplying plant and shows in the stock in transit (MB5T) same 154 ea.
but while GR i get error "PL stock exceeded by 30 ea"
please provide me a solution.
p.si dont want to covert error message to warning message and go ahead
regards
jithu.

VMI and reduce Stock in Transit - what are the right methods?

Hi Gurus,
We are using APO system to implement VMI functionality to replenish stock at customer location. We need to build stock in transit at customer location after PGI happens in ECC.
Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
SAP recommends following four methods to reduce:
http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
1. Goods receipt information is not sent from the customer to the vendor
2. The open purchase order quantity is sent from the customer to the vendor
3. A proof of delivery is sent from the customer
4. The stock in transit quantity is sent from the customer to the vendor
Out of these 1 and 2 methods are feasible in our scenario.
Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
Thanks in advance,
Niranjan

Dear Niranjan,
I have implemented SCM-APO VMI using Past Releases of SCM (version 4.1) for upto 300 Customer Sites & 500-1000 Products.
In my experience ... this is a Big Custom Development using EDI - IDOCs / ALE wherein you Receive from Customer the Data either as "Open Orders" or "Goods Receipt" of VMI Order at Customer Store or "In-transits" as they view it. There is a Facility to receive them in the PROACT IDOC but you have to write IDOC FUnction Modules to post the Data to the
VMI Planning Area as well as at Product-Location you have to Daily Delete the In-transit Order (Category EI or AH for ASN) and Upload Intransit Quantity directly into Live-Cache as a Order. The Development is also complex as you need to Map the VMI Customer Product to the Vendor/Manufacturer's Product COdes in SCM-APO.
I have experience implementing VMI like this several years ago ... and I am not sure if SAP SCM-APO built anything Standard for the Interface over the years. If you are not sure get a ALE/IDOC & ABAP Consultant or XI Consultant to work with you on the Project.
You can Delete In-transit Quantities by using RLCDEL Transaction for Category EI or AH (if ASNs are used). You need a IDOC/ALE Development to Calculate and Upload In-Transits and Update into the VMI Planning Area as well as Download to a FILE which you can use via another ABAP Development to Upload In-transits at the Product-Location (Customer) in SCM-APO.
Hope this helps.
Regards,
Ambrish Mathur

I want to Take Stock in Transit Report

Hai,
I want to Take Stock in Transit Report for a plant with Qty & Value with Posting Date..
So I can get the report Ex: Before April 1 2009.
MM5t & MC.9 Not upto my requirement.. Any table or tcode is there.?

Hi ,
In MB51 you can ehter the posting date
plz follow the following step
SPRO -- Materials Management --Inventory Management and Physical Inventory -- Reporting - - Define Field Selection for Material Document List-- enter RM07DOCS -- and field and table name MKPF --BUDAT and activate the check box
hope this will help u

Stock in transit issue

Hi All,
There is a transport SA between 2 plants,Plant A and B. Plant A has issued 34 qty to plant B .
But when Plant B is recieving the quantity it is not accepting system is giving error message M7 021 stock in transit exceeded by 19 PCE.
1) MB5T shows 34 qty in transit.
2) Schedule line is present as on the delivery date of the GR.
3) UOM is same .
This issue is quite urgent.
Please revert ASAP

Vineet,
Stock in transit is PO wise. It means that stock is allocated to POs, you can do GR only for the quantity which is allocated to your PO and you cannot use quantity which is allocated to other POs..
It is also possible that there are problem with dates - are you trying to do GR in past - in this case you can check your stock level in MB5TD.
Regards,
Csaba

Stock in transit as on date

Similar Messages

Maybe you are looking for