SWL order Error message on monitor 'Sum of % 200.0 exceeds 100%'

Dear all,
i am getting the following error for shop with limit order.
User has created A SWL PO with all identical data like vendor, Pur org, product category and only description change for 2 lines. Its showing only one PO which is in 'Error in Process' .
How can a cart with two lines convert into a 2 line PO ?? as per standard SRM it should create 2 different PO.
Noted that Error message in monitors reads 'Sum of %>200.0<exceeds 100%' in RZ20.
Line 1 reset. Sent to for approval. Ran resubmission process - did not work
Error in process. Error message in monitors 'Sum of %>200.0<exceeds 100%'>

Hi,
I think that the error is with the backend system which cannot handle 2 limits for one PO...
There is an OSS note...
Kind regards,
Yann

Similar Messages

  • Sum of percentages 200.0 exceeds 100 % in BAPI_ENTRYSHEET_CREATE FM

    Hi ,
    i am using this BAPI ( BAPI_ENTRYSHEET_CREATE) in my code
    and for a partcicular scenario return table is filled with the error message
    'sum of percentages > 200.0 < Exceeds 100%'
    How to remove this error any idea.
    Regards,
    Surendar Reddy.

    hi..
    Your error message clearly says that, it got the SUM Percentage as 200. Hope you know that, we can have percentage upto 100 only. So in your scenario, check whether retrieved value is appropriate or not.
    thanks.
    Padma

  • Purchase Order error message when on Sourcing Cockpit.

    Hi All,
    I have encountered a series of error messages when I try to convert my Shopping Cart into a Purchase Order in SRM 5 within the Sourcing Cockpit. I am using Extended Classic Scenario and have defined the number range in SRM and ECC5. The error messages are below, the moment i try to concert the cart to a Po;
    - Internal number range is missing for transaction type. Inform syst. admin    
    - Transaction type * does not exist. Check entries    
    - Some backend documents could not be generated, or they contain errors  Further Information 
    - No status object is available for 
    I have checked the transaaction type, number ranges assignments, attributes in PPOMA_BBP but fail to find the cause.
    Any pointers would be welcome!
    Thnx,
    Mike

    Hi Muthu,
    The number ranges are consistent as I have checked the number range for local purchase order and this is set as an internal between the range 3000000000 - 3999999999. On the transaction type for BUS2201 Purchase Order, 30 has been set as the Int Number Range, with all other fields left blank.
    The strange thing is that the documents that failed to convert into a PO had been reprocessed in the Application Monitor for Purchase Orders, but when I go back into Sourcing to create the PO, I now get the message:
    "You have either failed to select an item, or you cannot create a follow-on document due to an error that has occurred"
    Regards
    Mike,

  • Purchase Order Error Message

    How can I create or enable an error message when a PO is created using articles, that checks to see if there are upc's that might be missing from the articles.  We can right now create a PO with articles that do not have any UPC/EAN attached to the article.  This creates havok downstream.  I would like to have the PO checked to see if all the articles on the PO have a UPC with them.  Is there any error checking for this?  If so, then where can I enable it?

    From my experience using retail, the downstream processes shouldn't depend on the UPC/EAN attached to the Purchase Order.
    Technically, they should, but in reality vendor make mistakes, switch UPC/EAN between articles, and it's a pain if you depend on the PO UPC/EAN. Better to make the downstream processes depend on the master data which can be easily switched mid process.
    Yes I know, not a best pratice. But reality beats the fiction of a perfect process.
    Edit: And by the way, even the POS interface uses the master data to determine the UoM when you are making an GR against PO.

  • Sales Order Error Message 'Product does not exist in system'

    Hi Gurus,
    we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
    Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
    Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
    We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
    We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
    Please help me with that issue. Your help will be highly appreciated!!!
    Kind regards
    Hannes

    Solved with the help of SAP.
    Keywords: COM_PRODUCT
    COM_PRODUCT_GUID_GET_INTERNAL
    CONVERSION_EXIT_PRID1_INPUT
    CRM_ORDERADM_I 501
    Relevant notes:
    Note 1449146 - Dump While Creation IP via WebUI
    Note 1445079 - Unable to add products to contract
    The notes do not exactly described our issue but the code corrections were still relevent for us.

  • Error message "bad check sum" on Satellite pro 6100 when starting up

    I recently tried to turn my laptop on when i got the message "bad check sum"(i think it said that) "check system press[f1] to continue. After i pressed f1 it came up an options screen i didnt do anything to it and just continued then it loaded and shut down again. also i have to lie the laptop on its back just for the first green LED to come on and when i have the battery in the charger does not charge the battery and even when it does start to charge and i try to put it on the same sequence of orange LED's appear .
    so what does the message bad check sum mean ?
    thanks

    Hi,
    That means that the cmos (bios) battery is low on power and you should hang your machine for minimum a day on AC because the bios battery loads then.
    Such error appears when your cmos batt. is not full then the bios losts his settings and the checksum which would be performed by the system at startup will be faulty since the bios needs a check to know if everything is OK.
    Its a security feature which indicates if your hardware is ok or not. If the error appears more than once, then you should bring your machine to a technician or at least a local servicepartner for a checkup.
    Greets

  • Internal order - error message M7064 when trying to post GR in MIGO

    Hi All,
    When trying to post GR against an internal order in MIGO system gives error message M7064
    "Document 000009000030   does not contain any selectable items"
    I'm not familiar with CO orders. What shall I check and how? Could you please help?
    In KO03:
    Status of order: REL  DLV  GMPS SETC VCAL
    Allowed transactions: I can see e.g. RMRU, RMWA, RMWE, RMWF
    Isn't it possible hat somehow the status of the order controls it? But how?
    Please help.
    Thanks,
    Csaba
    Edited by: Csaba Szommer on Feb 3, 2010 4:21 PM

    HI,
    I'm not sure if you got a chance to look at the long text of the error message, which shows the possible reasons and procedure to follow. You may want to check if any of these reasons applicable in your case..
    Diagnosis
    The document or document item entered cannot be adopted.
    Possible reasons for this are:
    The document items have already been processed
    (Suggest zero lines indicator set?).
    the document items have been deleted or are blocked.
    the document items have been created for a different plant.
    (for reservations only) movements are not yet allowed for the reservation items.
    (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
    A confirmation must exist for the document items.
    The document items must be released first.
    The document is an R/2 document.
    Procedure
    Make sure your entries are correct.
    If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
    If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
    If the document is a purchase order, production order or a reservation, you can enter search criteria in the dialog box.
    You access the dialog box by choosing Enter with reference on the initial screen.
    If the document is an SAP R/2 document, you have to cancel it manually by entering the reversal movement type.
    Hope this helps.

  • Transfer Purchase Order - Error message "Field selection ZTR not defined"

    Hi all,
    I've customized a new transfer purchase order type : TRA.
    When I go to ME21N and choose TRA type, SAP displays this error message :
    "Field selection ZTR not defined
    Message no. ME028
    The field selection required by the system is not defined in table 162.
    Further processing is currently not possible."
    How can I fix that please ?
    Regards,
    Bahia.

    Hello,
    Check in IMG - MM - Purchasing - Purchase order -define screen layout - Check any field selction ZTR has been configured. And also check in Purchasing - purchase order - define document types - your PO doc type has reference to field selection group ZTR - if yes change it..
    Regards
    Mahesh Naik

  • Iphoto Book order Error message

    I have been trying to place a rather simple order for an Iphoto 6x8 book for 4 days now, and continue to get an error message " An unexpected Error has occurred" Please try again later.
    Hours on tech support, reloading updates, stripping prefs, double checking on my one-click settings, and more, have not changed one thing!!!
    Please, please help!!!!! Anyone.
    Randy Brandon

    I have been trying to place a rather simple order for
    an Iphoto 6x8 book for 4 days now, and continue to
    get an error message " An unexpected Error has
    occurred" Please try again later.
    Hours on tech support, reloading updates, stripping
    prefs, double checking on my one-click settings, and
    more, have not changed one thing!!!
    Please, please help!!!!! Anyone.
    Randy Brandon
    I've been having the same problem. For six days I have been trying to upload a book I created in iPhoto 5.0.4. After it transfers the first 128K I get an error message. The message tells me to retry. When I retry, iPhoto acts like it's completing the transfer. But the transfer happens so quickly that I know it's not really transferring the rest of the book. Then I get a message saying the order has been received. But then I get an email saying there has been a problem with the order and that they could not process my order so it has been cancelled. I have 25 of these emails in my inbox at the moment. Each one representing an attempt at uploading my book.
    I did manage to get one book to upload after numerous attempts. I didn't do anything different. Now I want to get two softcover copies of the book made and I can't get it to upload.
    I have tried everything - repairing permissions, running Cocktail, resetting my airport, trashing my preferences, reinstalling iPhoto, checking my fonts, rebuilding the book with smaller files - basically everything I have seen suggested on this forum. Nothing has worked.
    Last September I made 3 books and had no problems uploading them. No I don't know what is going on.
    It is really frustrating. I want to give these new books to my brother and sister for Christmas, but it looks like that is not going to happen now.
    Thanks Apple.
    Vincent Desjardins
    Dual 1 Ghz G4   Mac OS X (10.4.3)  
    Dual 1 Ghz G4   Mac OS X (10.4.3)  

  • T-code CO01 to create Production order:error message "No routing found"?

    I use t-code CO01 to create Production order.At the first screen I select material 72 and plant HJW1 .At the Header creen,I input the data in the General tab and press return but the sap show the error message "No routing found".But I have create the routing for the material 72 and plant HJW1.I don't know why the sap found no routing.So my question was how to found the reason about why the sap can not found the routing and how to resolve this problem.Thank you.

    Hi,
    Probably you would have created the routing today, with valid from todays date. But the order you are creating may be with start date in past and system is not able to find and valid routing for the day.
    I would suggest you to remove both the Basic "Start" and "End" and change the scheduling type to "Current date Scheduling", now enter. If system still not finding the routing, use the function "Read PP Master data".
    Regards,
    Prasobh

  • How to do settlement for service order - error message

    Hi,
    FYI, right now i'm involving with sap enhancement implementation (4.6c to Ecc6.0).In 4.6c I'm using Z program (SA38) to maintain settlement rule & create session name and then, KO8G for performing settlement.In log issue session, everthing is ok (status - process) and no error in log (but it still goes to dummy cost centre).
    in Ecc, i still using same program and T-code, but error message in log exist.(status - Incorrect)
    Notification is completed --> can only be displayed
    Rule cannot be deleted
    Order 1000000933: no costs or revenue exist
    Invalid account assignment category (--> long text)
    Transaction error
    can anyone give me guidance and how to handle this issue? does any configuration maybe wrong or not, please help me. I'm very appreciated your helps.i'm also looking method which using standard t-code (without customize program) to perform service order settlement.user manual very useful and important for me.
    Thanks.

    Hi
    anyone can helps me?
    Thanks

  • Purchase Order - Error messages

    Dear All,
    We are creating Purchase order , due to one of our processes we get a Error and we are not able to save the PO.
    We understand the error but we canot maintain some source list due to our processes.
    Is there a way like a USER enhancement to run off the error message in this special case or say convert the error message to
    WARNING instead of showing as Error.
    Thanks in advance,
    O

    Can you please post the error description and the error message number.
    When you get the error, double click in the bar that appears at the bottom of the screen and get the error message details.
    Regards,
    Pedro

  • Error Message 06 410 Sum of quantities 0 smaller than total quantity

    Hi Gurus
    Upon shopping cart approval, an error is being generated stating '06 410 Sum of quantities >0< smaller than total quantity. The cost assignment on the cart items is split 50/50 for each item.
    The SC is created on behalf of user XXX, user XXX approves it, the SC is in error status.
    I verified the PO approval value limit of user is more than SC value.
    Please advice.
    Thanks & Regards
    Sada

    Hi. Do the account assignments you have entered definitly add up to 100%?
    That error message means that the account assignments entered do not add up to the total of the shopping cart item.
    SRM should give an error, but if you look at note 1108139 there was a bug introduced by a support pack, and the error was not being given.
    The backend system then gives the error, that is why the catr is not transferring.
    See if the note is applicable, and if it is try it and press check in your cart, see if you get an error then.
    Regards,
    Dave.

  • Keys out of order error message?

    My PowerBook had a very bad crash after awaking from sleep. DiskWarrior will not work but I was able to use Apple disk utilities disk. The error message reads "keys out of order." After many attempts, I was able to use it as hard drive to back up all my files. I have been using a Mac a very long time and subscribe to numerous magazines but I have never heard of this. Any help will be greatly appreciated. I should probably add that it still will not start.
    G4/15 inch   Mac OS X (10.4.3)   2 gigs of ram
    Quick Silver G4/933    
    Quick Silver G4/933    

    Happy New Year Tuttle and ROdan,
    This is an interesting problem, unless of course it is happening to oneself!
    FWIW, there has apparently been success with a G5 booting in OS 9 without extensions. See:
    This got me thinking. If the machine is already on, and the OS tries to mount the disk, but the disk driver is damaged, well, bad things happen. Also when he writes, “When the drive spins up, the system loads the drivers from the device, and then executes it.” Really got me thinking. So obviously I cannot have the OS load the driver. But how do you make the Mac NOT load the driver? And more, even if you could, would the Mac even “see” the drive and mount it?
    In OS 7, 8, and 9, a common work around to get your Mac to boot when it was having problems was to hold down the Shift key to turn off extensions. Most problems in OS 9 and earlier were caused by extensions, so it was a very handy tool to use when troubleshooting problems on your Mac. But there is no equivalent in OS X that I am aware of. So what to do?
    Step Five: OS 9 with no extensions.
    I remembered from my IT days that if I booted Mac OS 9 without extensions on, any attached FireWire drive would also appear on the desktop. So I shut down the G4 running OS 9.1, fired up the G5 in Target mode, waited for it to get up and running, and restarted the G4 9.1 machine with extensions off.
    Victory! There was the bad drive, as well as the good one, in the G5 mounted on the G4’s desktop!
    Step Six: Copy! Copy! Copy!
    Before I did anything else, I quickly copied all the files I was missing since my last backup. Unfortunately, that also meant copying around 40GB of music files. So late Saturday night, I started the copying, and by Sunday morning, all my files were now safely on the good G5 250GB hard drive.
    Step Seven: Repair Time!
    The first thing I did was run the OS 9 version of Disk Tools on the bad drive. As expected, it could not fix the problem. But I had, prior to connecting the G5 the first time around, installed the OS 9 version of Alsoft’s Disk Warrior on the G4.
    I ran Disk Warrior on the bad drive. It took a LONG time. What Disk Warrior does is builds a new directory on a drive, which I was hoping would cure my problems. After three hours, Disk Warrior was done. It found a BUNCH of problems. To be on the safe side, I ran it again. This time it took only a little more than an hour, and did not find any more trouble.
    Shutting everything down, I rebooted the G5. I held down the Option key so that I could tell the G5 which drive to start from. It only saw the new drive as a viable boot disk. Oh-oh...
    I held down Command-S to bring up UNIX after the next boot, and ran FSCK-F on the bad drive. It worked, fixing a few thousand items. Yikes! What did Disk Warrior do? I ran it again, and it repaired some more. Three times, and it was done.
    Restart.
    Welcome to Macintosh!
    And all was well in the world.
    A few things to take away from this:
    Not all problems are as bad as they seem. There are usually always solutions to your computer problem. Some involved thinking way outside the box. How many people would have figured that Mac OS 9.1 with extensions off would be the solution to this Keys out of Order problem? Certainly not I.
    In most cases, Disk Warrior would have fixed this problem without all the run around I had to do. If you don’t already own it, you may want to go pick up a copy. It’s well worth the small investment.
    FSCK is not always going to repair or fix your problems. So be sure to back-up your data often.
    Having two hard drives is WAY better than having only one. If you have an iMac or Portable in which you cannot cram in another drive, look at external Firewire hard drives.
    It is also helpful to have another Mac laying around for the Target Mode trick. Can’t afford one? I see them on eBay all the time, REALLY cheap!
    Hope this article helps someone else out there if you ever run into a similar problem
    The full link is:
    http://www.mymac.com/showarticle.php?id=1817
    Joe

  • Error message BL011: For object FIAA, no sub-object 100 is maintained

    Hi,
    When I execute asset revaluation transaction (J1AI), the system shows the following error message: For object FIAA, no sub-object 100 is maintained.
    I have searched this error in OSS notes but I haven't found anything about it.
    Could you help me? Thanks in advance. Regards.

    Probably, the subobject 100 wasn´t created in transaction SLG0, object FIAA. By error message BL011 you´ve
    to create this subobject.
    Please, run the transaction SLGO, FIAA -> subobject  -> new entries -> "100 Post revaluation".

Maybe you are looking for