Syntax error in Update Routine

Dear All,
While trying to update infoobject /BIC/ZGROSSPRI in an ODS in BI through an update routine, a syntax error is thrown when I am defining a variable of type tys_TG_1-/BIC/ZGROSSPRI.
For instance,
DATA: VALUE TYPE tys_TG_1-/BIC/ZGROSSPRI.
The error is :
E:Field "_ty_s_TG_1-/BIC/ZGROSSPRI" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Below given is the code which I am using for the same. Kindly advise how to correct this error.
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
Edited by: Suneeth Sebastian on Apr 7, 2010 4:11 PM
Edited by: Rob Burbank on Apr 7, 2010 1:19 PM

Dear All,
While trying to update infoobject /BIC/ZGROSSPRI in an ODS in BI through an update routine, a syntax error is thrown when I am trying to define a variable of type tys_TG_1-/BIC/ZGROSSPRI. How is it possible to define a variable of type target field(Infoobject) ?
For instance,
DATA: VALUE TYPE tys_TG_1-/BIC/ZGROSSPRI.
The error is :
E:Field "_ty_s_TG_1-/BIC/ZGROSSPRI" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
tys_TG_1-/BIC/ZGROSSPRI is already defined in the Class section as below
TYPES:
      BEGIN OF tys_TG_1,
     InfoObject: ZGROSSPRI Gross Price in Statistical Currency.
        /BIC/ZGROSSPRI           TYPE /BIC/OIZGROSSPRI,
      END   OF tys_TG_1.

Similar Messages

[Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement.

Hi,
I am getting following error message ,
[Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement.
When run this code.
<%@ page import= "java.sql.*"%>
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb");
Statement st = con.createStatement();
st.executeUpdate("update tscipshift set 11-Aug-08='M' where TechN='Elamparuthi'");
%>
tscipshift=table ,column=11-Aug-08 are all exist.
I dont know why I am getting error mesage.
Any idea why?

Shahbaz2008 wrote:
you haven't set your user name and password hereI don't believe that's necessary with Access. Then again, it's not an enterprise database.
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb");
change it to this
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb","+username+","+password+");
here pass your username and password...
In Oracle default user name and password is
username = scott
password = tigerSo who uses that? Only an eejit would leave that account open.
So the statement would be
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb","scott","tiger");
or In Mirosoft Access there is no user name and password so the statement will be Like I said - unnecessary, and not the reason the OP is having problems.
Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb","","");>
Besides this change your table name 11-Aug-08 to anything that is not start with number or any special symbols.
for example aug112008 is good or aug is too good.No, it's still not good if you understand ANYTHING about relational databases and normalization.
I think it would work.I think you're just as stup!d as the OP.
%

JDBC: Syntax error in UPDATE statement???

Hi,
I have been trying to solve this seemingly simple problem for the past 4 hours, and I had no success. I am working on a jdbc:odbc connection which utilizes MS Access. I have been constantly getting "Syntax error in UPDATE statement", and this is the statement
(name of the table is CDs, columns are number, artist, album, label and date - all strings):
query = "UPDATE CDs SET artist = '" + fields.artist.getText() +"', album = '" +
fields.album.getText() + "', label = '" +
fields.label.getText() + "', date = '" +
fields.date.getText() + "' WHERE number = '" + fields.number.getText() + "'";
Can anybody recognize an error? Thank you,
mirkokrug

A couple of possibilities.
If the column NUMBER is numeric then it wouldn't need quotes around the data value. Also if the column DATE is a date or date/time type then the format from the textbox may not be correct.
Col

Error while transporting Transformation: Syntax error in Start Routine

Hi Everyone,
I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
'Start Routine: Syntax error in routine'
I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
Any suggestions on the steps I could take to transport the transformation to my quality system?
Thanks,
Ram

Hi Ajay, Shanthi, svu and Ray
I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package).

Syntax error in Start Routine routine 9998 in transformation

Hi Guyz,
I am getting the below error while doinf the syntax check in start routine in one of the transformation in BW production after the failed TR movement
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
but for the same transformation in quality its showing no syntax errors found.
its an odd behaviour.
please guide with ur expertise.
cheerz,
raps.

Hi,
Check the note 1052648. it says that:
Start routine:
           In the start routine, all the fields from the source are always available.
During the migration, a type '_ty_t_SC_1_full' is generated in '2nd part global'. Since Note 1325124, this type has been adjusted when the field list is changed. In the past, a change to the field list caused syntax errors of the type:
For update rules:
                    E: For PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is not compatible with the formal parameter "DATA_PACKAGE".
For transfer rules:
                    E:For PERFORM or CALL FUNCTION "STARTROUTINE", the actual parameter "SOURCE_PACKAGE" is not compatible with the formal parameter "DATAPAK".
           If this error continues to occur, go to the solution section to correct it.
           Solution:
           This error should now be automatically corrected with Note 1325124. Access the incorrect start routine in change mode. The type '_ty_s_SC_1_full' is then automatically adjusted to the source structure. If this does not work, you should use the tool 'RSTRAN_MIGRATION_CHECK' (described in Note 1369395) to check and possibly repair the transformation in question.
           If this error still occurs, you can correct it manually as follows:
           Copy the field list of the type     '_ty_s_SC_1' from the 'private section' of the CLASS lcl_transform DEFINITION (you can find this when you scroll up in the routine editor of the start routine) to the type '_ty_s_SC_1_full' of '2nd part global'.
Regards,
Anil Kumar Sharma .P

Syntax error in start routine

Dear All,
I have activated the infocube 0sd_c03 with grouping "in data flow before" and the infocube is activated with datasources
2LIS_11_VAITM
2LIS_11_VAHDR
2LIS_12_VCITM
2LIS_12_VCHDR
2LIS_13_VDITM
2LIS_13_VDHDR in 3.x where as
TRCS 2LIS_13_VDITM -> CUBE 0SD_C03 in transformation with DTP.
when I activate the transformation I get error as mentioned below:
Start Routine: Syntax error in routine and in the start routine when I check the details of the error is
                  E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
                           "SOURCE_PACKAGE" is incompatible with the formal parameter
                               "DATA_PACKAGE".
If source pakage is replaced by data package the system message is data_package is not available.
What do I do to resolve this issue.
KS

hi,
There is a structral diffrence between SOURCE_PACKAGE and DATA_PACKAGE
so you need to change tys_SC_1_full
go through the below links for similar problem
Re: 0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Re: 2LIS_03_BF transformation problem

Syntax error in Transformation routine

Hi Folks,
We are In SP 17.
I have migrated standard 0bpartner_attr transfer rules to a transformation with syntax errors.
I have a routine for a gender, Valid From and Valid To its giving the following erorr.
E:Field "TRAN_STRUCTURE-VALID_FROM" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"
statement.
the following is the routine code for Gender.
PROGRAM trans_routine.
 CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
 DATA:
 p_check_master_data_exist
 TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
 Available information: Refer to methods of
 interface 'if_rsbk_request_admintab_view'
 p_r_request
 TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
 TYPE-POOLS: rsd, rstr.
Rule specific types
 TYPES:
 BEGIN OF tys_SC_1,
 Field: XSEXM Male.
 XSEXM TYPE C LENGTH 1,
 Field: XSEXF Female.
 XSEXF TYPE C LENGTH 1,
 Field: XSEXU Unknown.
 XSEXU TYPE C LENGTH 1,
 Field: RECORD.
 RECORD TYPE RSARECORD,
 END OF tys_SC_1.
 TYPES:
 BEGIN OF tys_TG_1,
 InfoObject: 0GENDER Gender.
 GENDER TYPE /BI0/OIGENDER,
 END OF tys_TG_1.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
 METHODS
 compute_0GENDER
 IMPORTING
 request type rsrequest
 datapackid type rsdatapid
 SOURCE_FIELDS type tys_SC_1
 EXPORTING
 RESULT type tys_TG_1-GENDER
 monitor type rstr_ty_t_monitor
 RAISING
 cx_rsrout_abort
 cx_rsrout_skip_record
 cx_rsrout_skip_val.
 METHODS
 invert_0GENDER
 IMPORTING
 i_th_fields_outbound TYPE rstran_t_field_inv
 i_r_selset_outbound TYPE REF TO cl_rsmds_set
 i_is_main_selection TYPE rs_bool
 i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
 i_r_universe_inbound TYPE REF TO cl_rsmds_universe
 CHANGING
 c_th_fields_inbound TYPE rstran_t_field_inv
 c_r_selset_inbound TYPE REF TO cl_rsmds_set
 c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
$$ end of rule type
 TYPES:
 BEGIN OF tys_TG_1_full,
 InfoObject: 0BPARTNER Business Partner.
 BPARTNER TYPE /BI0/OIBPARTNER,
 InfoObject: 0BP_ACTITL1 First Academic Title.
 BP_ACTITL1 TYPE /BI0/OIBP_ACTITL1,
 InfoObject: 0BP_ACTITL2 Second Academic Title.
 BP_ACTITL2 TYPE /BI0/OIBP_ACTITL2,
 InfoObject: 0BP_BTHNAME BP: Person's Name at Birth.
 BP_BTHNAME TYPE /BI0/OIBP_BTHNAME,
 InfoObject: 0BP_CAT Business Partner Category.
 BP_CAT TYPE /BI0/OIBP_CAT,
 InfoObject: 0BP_CONS Business Partner (Consolidated/Cleansing).
 BP_CONS TYPE /BI0/OIBP_CONS,
 InfoObject: 0BP_CONTACT BP: Contact Permission.
 BP_CONTACT TYPE /BI0/OIBP_CONTACT,
 InfoObject: 0BP_EXTERN BP Number in External System.
 BP_EXTERN TYPE /BI0/OIBP_EXTERN,
 InfoObject: 0BP_FSTNAME BP: Person's First Name.
 BP_FSTNAME TYPE /BI0/OIBP_FSTNAME,
 InfoObject: 0BP_GROUP Business Partner Grouping.
 BP_GROUP TYPE /BI0/OIBP_GROUP,
 InfoObject: 0BP_GRPNAM1 BP: Name 1 (Group).
 BP_GRPNAM1 TYPE /BI0/OIBP_GRPNAM1,
 InfoObject: 0BP_GRPNAM2 BP: Name 2 (Group).
 BP_GRPNAM2 TYPE /BI0/OIBP_GRPNAM2,
 InfoObject: 0BP_GRPTYPE BP: Group Type.
 BP_GRPTYPE TYPE /BI0/OIBP_GRPTYPE,
 InfoObject: 0BP_LSTNAME BP: Person's Surname.
 BP_LSTNAME TYPE /BI0/OIBP_LSTNAME,
 InfoObject: 0BP_MAR_STA BP: Marital Status.
 BP_MAR_STA TYPE /BI0/OIBP_MAR_STA,
 InfoObject: 0BP_MDLNAME BP: Person's Middle Name or Second First
*Name.
 BP_MDLNAME TYPE /BI0/OIBP_MDLNAME,
 InfoObject: 0BP_SECNAME BP: Person's Second Surname.
 BP_SECNAME TYPE /BI0/OIBP_SECNAME,
 InfoObject: 0CHANGEDBY Changed by.
 CHANGEDBY TYPE /BI0/OICHANGEDBY,
 InfoObject: 0CH_AT Time of Last Change.
 CH_AT TYPE /BI0/OICH_AT,
 InfoObject: 0CH_ON Last changed on.
 CH_ON TYPE /BI0/OICH_ON,
 InfoObject: 0CREATEDBY Name of person who created the object.
 CREATEDBY TYPE /BI0/OICREATEDBY,
 InfoObject: 0CREATEDON Date on which the record was created.
 CREATEDON TYPE /BI0/OICREATEDON,
 InfoObject: 0CREA_TIME Time Created.
 CREA_TIME TYPE /BI0/OICREA_TIME,
 InfoObject: 0GENDER Gender.
 GENDER TYPE /BI0/OIGENDER,
 InfoObject: 0LEGALFORM Legal Status of Organization.
 LEGALFORM TYPE /BI0/OILEGALFORM,
 InfoObject: 0NAME_ORG1 BP: Organization Name 1.
 NAME_ORG1 TYPE /BI0/OINAME_ORG1,
 InfoObject: 0NAME_ORG2 BP: Organization Name 2.
 NAME_ORG2 TYPE /BI0/OINAME_ORG2,
 InfoObject: 0NAME_ORG3 BP: Organization Name 3.
 NAME_ORG3 TYPE /BI0/OINAME_ORG3,
 InfoObject: 0NAME_ORG4 BP: Organization Name 4.
 NAME_ORG4 TYPE /BI0/OINAME_ORG4,
 InfoObject: 0NATION Nationality.
 NATION TYPE /BI0/OINATION,
 InfoObject: 0TITLE_SPPL Name Supplement, for example, Noble Title
 TITLE_SPPL TYPE /BI0/OITITLE_SPPL,
 InfoObject: 0BP_TYPE Partner:Partner Type.
 BP_TYPE TYPE /BI0/OIBP_TYPE,
 InfoObject: 0GN_PAR_SSY Source System of a Partner.
 GN_PAR_SSY TYPE /BI0/OIGN_PAR_SSY,
 InfoObject: 0LOGSYS Source System.
 LOGSYS TYPE RSDLOGSYS,
 InfoObject: 0RECORDMODE BW Delta Process: Record Mode.
 RECORDMODE TYPE RODMUPDMOD,
 InfoObject: 0BP_GUID GUID of Business Partner.
 BP_GUID TYPE /BI0/OIBP_GUID,
 InfoObject: 0BPDATEFROM GP Attributes Valid from.
 BPDATEFROM TYPE /BI0/OIBPDATEFROM,
 InfoObject: 0BPDATETO GP Attributes Valid to.
 BPDATETO TYPE /BI0/OIBPDATETO,
 Field: RECORD Data record number.
 RECORD TYPE RSARECORD,
 END OF tys_TG_1_full.
Additional declaration for transfer rule interface
DATA:
 g_t_errorlog TYPE rssm_t_errorlog_int,
 RECORD_ALL LIKE SY-TABIX.
global definitions from transfer rules
DATA: gs_cob_pro TYPE rsd_s_cob_pro,
 gt_viobj TYPE rsd_t_viobj,
 gs_viobj TYPE rsd_s_viobj.
DATA: l_s_errorlog TYPE rssm_s_errorlog_int,
 l_text TYPE string.
FORM compute_BPDATEFROM
 CHANGING
 RESULT TYPE tys_TG_1_full-BPDATEFROM
 RETURNCODE LIKE sy-subrc
 ABORT LIKE sy-subrc
RAISING
 cx_sy_arithmetic_error
 cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_valid_from.
ENDFORM. "BPDATEFROM
FORM compute_BPDATETO
 CHANGING
 RESULT TYPE tys_TG_1_full-BPDATETO
 RETURNCODE LIKE sy-subrc
 ABORT LIKE sy-subrc
RAISING
 cx_sy_arithmetic_error
 cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_valid_to.
ENDFORM. "BPDATETO
FORM compute_GENDER
 CHANGING
 RESULT TYPE tys_TG_1_full-GENDER
 RETURNCODE LIKE sy-subrc
 ABORT LIKE sy-subrc
RAISING
 cx_sy_arithmetic_error
 cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_gender.
ENDFORM. "GENDER
FORM compute_GN_PAR_SSY
 CHANGING
 RESULT TYPE tys_TG_1_full-GN_PAR_SSY
 RETURNCODE LIKE sy-subrc
 ABORT LIKE sy-subrc
RAISING
 cx_sy_arithmetic_error
 cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_gn_par_ssy.
ENDFORM. "GN_PAR_SSY
$$ end of 2nd part global - insert your code only before this line *
 CLASS routine IMPLEMENTATION
CLASS lcl_transform IMPLEMENTATION.
METHOD compute_0GENDER.
IMPORTING
 request type rsrequest
 datapackid type rsdatapid
 SOURCE_FIELDS-XSEXM TYPE C LENGTH 000001
 SOURCE_FIELDS-XSEXF TYPE C LENGTH 000001
 SOURCE_FIELDS-XSEXU TYPE C LENGTH 000001
 EXPORTING
 RESULT type tys_TG_1-GENDER
 DATA:
 MONITOR_REC TYPE rsmonitor.
*$*$ begin of routine - insert your code only below this line *-*
Data:
 l_s_error_log type rssm_s_errorlog_int,
 l_subrc type sy-tabix,
 l_abort type sy-tabix,
 ls_monitor TYPE rsmonitor,
 ls_monitor_recno TYPE rsmonitors.
REFRESH:
monitor,
monitor_recno.
Migrated transfer rule call
Perform compute_GENDER
 CHANGING
 RESULT
 l_subrc
 l_abort.
*-- Convert Messages in Transformation format
 LOOP AT G_T_ERRORLOG INTO l_s_error_log.
 move-CORRESPONDING l_s_error_log to MONITOR_REC.
 append monitor_rec to MONITOR.
 ENDLOOP.
 IF l_subrc <> 0.
 RAISE EXCEPTION TYPE cx_rsrout_skip_val.
 ENDIF.
 IF l_abort <> 0.
 RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
 ENDIF.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "compute_0GENDER
 Method invert_0GENDER
 This subroutine needs to be implemented only for direct access
 (for better performance) and for the Report/Report Interface
 (drill through).
 The inverse routine should transform a projection and
 a selection for the target to a projection and a selection
 for the source, respectively.
 If the implementation remains empty all fields are filled and
 all values are selected.
METHOD invert_0GENDER.
$$ begin of inverse routine - insert your code only below this line-
... "insert your code here
$$ end of inverse routine - insert your code only before this line -
ENDMETHOD. "invert_0GENDER
ENDCLASS. "routine IMPLEMENTATION
let me know how to correct the above code.
thanks

Hi,
the field tran_structure is no more available. The name changed to source_fields. Additionally there is no datapak available. It is now source_fields_table. You might need to use field symbols to access the fields.
regards
Siggi

Syntax Error in Update Statement

Would a smart and kind CF pro mind putting a fresh pair of
eyes on this code and tell me where the syntax error is? All the
fields in the statement are numeric except the last one (comments).
I have enclosed them in val() to ensure they are numeric when
inserted into the DB. The fields they're being inserted into are
numeric. I need to be numeric because I will be doing calculations
on them. Also, I have triple-checked to ensure the datasource,
table, and field names all match.
Thanks,
GwenH

Try using <cfqueryparam>
<cfquery datasource="reviews">
UPDATE evals
SET focus = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.focus#">
, strengths = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.strengths#">
, tailored = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.tailored#">
, badinfo = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.badinfo#">
, format = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.format#">
, visual = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.visual#">
, grammar = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.grammar#">
, pronouns = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.pronouns#">
, written = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.written#">
, achieve = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.achieve#">
, sell = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.sell#">
, negative = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.negative#">
, top = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.top#">
, general = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.general#">
, intro = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.intro#">
, orientation = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.orientation#">
, paragraphs = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.paragraphs#">
, two = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.two#">
, length = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.length#">
, none = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.none#">
, comments = <cfqueryparam cfsqltype="cf_sql_clob"
value="#form.comments#">
WHERE resumeID = <cfqueryparam cfsqltype="cf_sql_numeric"
value="#form.resumeID#">
</cfquery>
Ken Ford
Adobe Community Expert Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Adobe Certified Expert - ColdFusion 8
Fordwebs, LLC
http://www.fordwebs.com
"GwenH" <[email protected]> wrote in message
news:[email protected]...
> Would a smart and kind CF pro mind putting a fresh pair
of eyes on this
> code
> and tell me where the syntax error is? All the fields in
the statement are
> numeric except the last one (comments). I have enclosed
them in val() to
> ensure
> they are numeric when inserted into the DB. The fields
they're being
> inserted
> into are numeric. I need to be numeric because I will be
doing
> calculations on
> them. Also, I have triple-checked to ensure the
datasource, table, and
> field
> names all match.
>
> Thanks,
> GwenH
>
> <cfquery datasource="reviews">
> UPDATE evals
> SET
> focus = val(#form.focus#)
> , strengths = val(#form.strengths#)
> , tailored = val(#form.tailored#)
> , badinfo = val(#form.badinfo#)
> , format = val(#form.format#)
> , visual = val(#form.visual#)
> , grammar = val(#form.grammar#)
> , pronouns = val(#form.pronouns#)
> , written = val(#form.written#)
> , achieve = val(#form.achieve#)
> , sell = val(#form.sell#)
> , negative = val(#form.negative#)
> , top = val(#form.top#)
> , general = val(#form.general#)
> , intro = val(#form.intro#)
> , orientation = val(#form.orientation#)
> , paragraphs = val(#form.paragraphs#)
> , two = val(#form.two#)
> , length = val(#form.length#)
> , none = val(#form.none#)
> , comments = '#form.comments#'
> WHERE resumeID = #form.resumeID#
> </cfquery>
>

Syntax error in 'UPDATE' query ???

hi..
i know there is something wrong with this query..but not able to find it out.
i am using session bean in my project..in one of the method of the bean class, i am updating 'Acc_holder' table.
below is the code
public String insDeposit(String vuserid, String vaccountno, int amount, int chqno)
... //connection code
Statement stmt=null;
query="UPDATE Acc_holder SET balance=balance" + vamount + "WHERE userid=' "+vuserid+" ' ";
}In above query, Acc_holder Table has balance(int), vamount(int), userid(varchar) fields.
when i run, error msg that i get is "java.rmi.RemoteException...java.sql.SQLException:...Incorrect syntax near 'userid'.
please suggest how this query should be formatted

Use a prepared statement.
And after you start doing that then put a space in front of the 'where'

Syntax errors in update query with inner joins and sub query.

Below is the query:
UPDATE sp_CFQ_Coord_Corrections
INNER JOIN (CFQ_Coord_Corrections
INNER JOIN CFQ_Referrals ON CFQ_Coord_Corrections.CorrID = CFQ_Referrals.RecID)
ON sp_CFQ_Coord_Corrections.ID = CFQ_Referrals.RecID
SET CFQ_Coord_Corrections.MatchFound = 1,
CFQ_Coord_Corrections.RecTblID = [CFQ_Referrals].[RecTblID],
sp_CFQ_Coord_Corrections.MatchFound = 1
WHERE (((CFQ_Coord_Corrections.MatchFound)=0)
AND ((sp_CFQ_Coord_Corrections.MatchFound)=0)
AND ((CFQ_Coord_Corrections.RecImported)=1)
AND ((CFQ_Referrals.RecFileName)='COORDCORR_SPOINT')
AND ((CFQ_Referrals.RecCombKey)='No.Match')
AND ((sp_CFQ_Coord_Corrections.RecImported)=1));
Error messages seen when executed:
Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'INNER'.
Msg 102, Level 15, State 1, Line 10
Incorrect syntax near 'CFQ_Coord_Corrections'.
Please help.....

Below is the query:
UPDATE sp_CFQ_Coord_Corrections
INNER JOIN (CFQ_Coord_Corrections
INNER JOIN CFQ_Referrals ON CFQ_Coord_Corrections.CorrID = CFQ_Referrals.RecID)
ON sp_CFQ_Coord_Corrections.ID = CFQ_Referrals.RecID
SET CFQ_Coord_Corrections.MatchFound = 1,
CFQ_Coord_Corrections.RecTblID = [CFQ_Referrals].[RecTblID],
sp_CFQ_Coord_Corrections.MatchFound = 1
WHERE (((CFQ_Coord_Corrections.MatchFound)=0)
AND ((sp_CFQ_Coord_Corrections.MatchFound)=0)
AND ((CFQ_Coord_Corrections.RecImported)=1)
AND ((CFQ_Referrals.RecFileName)='COORDCORR_SPOINT')
AND ((CFQ_Referrals.RecCombKey)='No.Match')
AND ((sp_CFQ_Coord_Corrections.RecImported)=1));
Error messages seen when executed:
Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'INNER'.
Msg 102, Level 15, State 1, Line 10
Incorrect syntax near 'CFQ_Coord_Corrections'.
Please help.....
sp_CFQ_Coord_Corrections is a table and not a stored procedure.
are these both tables "sp_CFQ_Coord_Corrections" and "CFQ_Coord_Corrections" different ??

Undue Syntax error in transformation routine

Hi,
A routine is reported to be incorrect (error RSTRAN 523) during the check of the transformation. However, a check on the source code in the editor returns no errors.
I've implemented the oss note 980548, but I still face the problem.
Do you have any idea of how to solve this issue ?
Thanks in advance !
Dieu

Hi Dieu,
I had a problem related to a Transfer Roule for the selection of the same filed in Start Routine and single filed routine.
Check if you are obtaining two InfoObjects from the same field and check the corresponding routines.
Ciao.
Riccardo.

Syntax errors in update query

Below is the query:
UPDATE CFQCC
SET sp_CFQCorr.RecImported = 1,
CFQCC.RecImported = 1
from [HR_DEV_DM].[CFQ_TEST].CFQ_Coord_Corrections as CFQCC
INNER JOIN [HR_DEV_DM].[CFQ_TEST].sp_CFQ_Coord_Corrections as sp_CFQCorr
ON CFQCC.CorrID = sp_CFQCorr.ID
WHERE (((sp_CFQCorr.RecImported)=0)
AND ((CFQCC.RecImported)=0));
When executed, it gives the below error:
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "sp_CFQCorr.RecImported" could not be bound.
Please help....

UPDATE Table1, Table2
SET Table1.Column1 = 'one'
,Table2.Column2 = 'two'
FROM Table1 T1, Table2 T2
WHERE T1.id = T2.id
and T1.id = 'id1'

Syntax error in Transfer routine

Hai all,
 I am trying to write a routine for an object in the datasource trasnfer structure. I am getting a error. The code and the error as as follows.
DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
SELECT SINGLE * FROM /BI0/PCOMP_CODE
 WHERE COMP_CODE = TRAN_STRUCTURE-BUKRS AND
 OBJVERS = 'A'.
IF SY-SUBRC = 0.
 RESULT = /BI0/PCOMP_CODE-CHRT_ACCTS.
ENDIF.
returncode <> 0 means skip this record
RETURNCODE = 0.
abort <> 0 means skip whole data package !!!
ABORT = 0.
The error message I am getting is
"E:A target area must be declared either explicitly with an INTO clause or implicitly with a TABLES statement."
 The cursor is going to the line " SELECT SINGLE *.....".
 I guess its pointing where the mistake is. It says the target must be specified. But I already specified the target.
I appreciate any kind of help.
Thanks a lot.

Hi,
You didn't provide a INTO class for the select statement.
DATA : BEGIN OF LCL_COMPCODE.
DATA : INCLUDE STRUCTURE /BI0/PCOMP_CODE.
DATA : END OF LCL_COMPCODE.
SELECT SINGLE * FROM /BI0/PCOMP_CODE
WHERE COMP_CODE = TRAN_STRUCTURE-BUKRS AND
OBJVERS = 'A'
INTO LCL_COMPCODE.
Loop at the LCL_COMPCODE to retrieve the data.
Thank you
Arun

Regarding syntax error while updating from 4.6b to ECC 6.0

hello Experts,
I'm presently working in upgrade project, Here it shows an error for one of the form pasted below.
FORM MAKEPRINT USING TXT.
DATA: BEGIN OF CVT_TABLE,
 X0(1) TYPE X VALUE 0,
 C0(1) VALUE '#',
 X1(1) TYPE X VALUE '7F',
 C1(1) VALUE '#',
 END OF CVT_TABLE.
TRANSLATE TXT USING CVT_TABLE.
ENDFORM. "MAKEPRINT
Error - CVT_TABLE must be a character type data object ( data type C,N,D,T or STRING ).
I dont have solution for the above code, Would you please kindly provide me the solution.
<removed_by_moderator>
Thanks,
Abdur
Edited by: Julius Bussche on Sep 22, 2009 1:26 PM
Edited by: Julius Bussche on Sep 22, 2009 1:26 PM

Hi,
 This happens due to unicode conversion in ECC.You will have to change the type X to type C using the class cl_abap_char_utilities. For code help see the below link
http://help.sap.com/saphelp_nw04/helpdata/EN/79/c554d9b3dc11d5993800508b6b8b11/content.htm

Syntax error while executing Key Figure routine

Hello,
I am posting my question again, as I have not got any solution. Please help it will be really appreciated. Here's the description
I am loading data from flatfile to an Infocube with 3 keyfigures: Sales Price , Sales Quantity, Sales Revune. Getting values for Sales Price and Salea Quantity from flatfile and calculating for Sales Revunue IO_VB_REV using routine
- I created Transformations, and under Rule Group: Standard Group box I have not mapped IO_VB_REV any datasource field and see 'X' sign against the field.
- In rules detail screen, I add two source fields of Rule , IO_VB_QU and IO_VB_PRC. I see IO_VB_REV already added under 'Target fields of Rule' section
- I then add the only following line to routine
RESULT = SOURCE_FIELDS_RULE-/BIC/IO_VB_QU * SOURCE_FIELDS_RULE-/BIC/IO_VB_PRC .
- Clicking on check button it gives no syntax error message. I save and exit back to Rule Details page.
- For IO_VB_REV field If I select any of 2 options i.e. Fixed Unit or No conversion it gives me a dump. So I select 'from conversion' option. In that case I enter USD against 'Conversion Type' field. It gives me information box popup with 'Incorrect Input Message'
- When check button hit on 'Rule Details' page, it gives me error message ' Syntax error in routine '
Why is it giving me syntax error, inspite of the fact that I get 'no syntax error' message on routine page. Also why am I getting short dumps on changing Conversion Type

Hi Olivier,
I really thank you for ur efforts in helping me solving this problem. Below is complete description of KF defined,
1. Created InfoObjects for Sales Quantity, Sales Price, Sales Revunue
Definition of Sales Quantity
Name: IO_VB_QU
Type/Data Type : Quantity
Data Type: QUAN - Quantity field, points to unit field with format UN
Currency / unit of measure
Unit / Currency: 0UNIT
Definition of Sales Price
Name: IO_VB_PRC
Type/Data Type : Amount
Data Type: CURR - Currency field, stored as DEC
Currency / unit of measure
Fixed Currency: USD
Definition of Sales Revunue
Name: IO_VB_REV
Type/Data Type : Amount
Data Type: CURR - Currency field, stored as DEC
Currency / unit of measure
Fixed Currency: USD
2. As the data is being read from flatfile, created DataSource with fields for Sales ID, Sales Price, Sales Quantity. As I am reading unit for quantity from file (has values EA,BOX,CSE), I have a corresponding field UNIT in DataSource. No field for Sales Revunue.
3. I use 'Create Transformation' functionality to automatically create transformations.
4. Rule Details page of each of 3 KFs has following values
Rule Details page of Sales Quantity
Rule Type: Direct Assignment
Aggregation : Summation
Target Unit: 0UNIT
Unit: from Source
Source Unit: UNIT
Source Fields of Rule: /BIC/IO_VB_QU, UNIT
Target Fields of Rule: 0UNIT, IO_VB_QU
Rule Details page of Sales Price
Rule Type: Direct Assignment
Aggregation : Maximum
Fixed Target Currency : USD
Currency: No Conversion
Source Fields of Rule: /BIC/IO_VB_PRC
Target Fields of Rule: IO_VB_PRC
Rule Details page of Sales Revunue
Rule Type: Routine
Aggregation : Summation
Fixed Target Currency : USD
Currency: from Conversion
Conversion Type: ??????.....(I entered USD it gives me Incorrect Input message)
Source Fields of Rule: /BIC/IO_VB_PRC, /BIC/IO_VB_QU, UNIT
Target Fields of Rule: IO_VB_REV
I have this line is the routine
RESULT = SOURCE_FIELDS_RULE-/BIC/IO_VB_QU * SOURCE_FIELDS_RULE-/BIC/IO_VB_PRC.
Let me know if u need any other info......
I really appreciate u trying to help me
Vidya

Syntax error in Update Routine

Similar Messages

Maybe you are looking for