Tablet curves not registering
Tablet: Hanvon ET0605U Drawing Tablet
I'm having an 'odd' issue where PS only seems to want to register when I press down with the pen on my tablet and when I release. For instance, using the brush tool, I'll making an arc on a new file. The result is a straight line starting when I started the arc and ending where I removed the pen from tablet. I don't even have this issue in MS Paint! Is there some setting or such that I need to adjust in PS to correct for this?
You wouldn't be in some way making your system think your Shift key is held down, would you?
I ask because if you click a brush tool with the Shift key held down you get a straight stroke from the last place you clicked to the current position. That's a feature.
-Noel
Similar Messages
-
Could not register this tablet (30010
please help! ive bin saving for a while to get a playbook nd finally got one ysterday. i was so tired nd cudnt set it up ysterday. however today, when i did try to set it up over my office wifi, it just keeps on telling me could not register this tablet (3001) check settings. ive tried updating it over the pc using dm nd the stuff has simply refused to download. the download status bar is just simply stuck in one spot. some1 please help!. nd hey rim guiys help out. the stuff cost me two monhts wages nd i aint even enjoying it one bit!
"dat"? "bin"?
Could you please turn off your ALL CAPS key? I am sure you're frustrated, but you're not frustrated with me. I am trying to help you.
So, do you have a good internet connection on the PC you're connected to?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
No Direct support for BlackBerry PlayBook tablet - why not I just bought it?
I've just bought a playbook. It says it comes with complimentary technical support for 90 days form the date of purchase. I have attempted to register the device using the S/N number as required and I get the following:
Unfortunately, your BlackBerry® PlayBook™ tablet does not qualify for Complimentary Support. You can, however, get assistance using incident based support from Research In Motion.
Why? grrrrrrrrrrrrIt should be. The complimentary support is just for help setting it up.
If you visit http://blackberry.com/support and follow the link for PlayBook you should get a phone number you can call, and RIM support will be able to help you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you! -
KABA connection issue - program not registered
I am trying to troubleshoot a connection error between SAP and KABA. I have the RFC created in SAP and when I test the connection I get a program not registered. The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating). We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error. Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP? Any assistance would be appreciated.
Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor. -
Help: can not regist application in HP-UX 11.0
My application work fine in iAS SP3 for Win2000, but when I deployed it to
HP-UX 11.0, It can not regist the application in HP-UX.
can any onr help me, thanks
Lu yanqiang
the error message is:
HotSpot VM warning: Setting of property "java.compiler" is ignored
creating engine class space...
loading jx2util...
loading jx2util...done
Connected to LDAP server on websvr.sh-catcher.com port 389
com.kivasoft.engine.EngineClassLoaderNonVersionable: EngineClassLoader
constructer called
com.kivasoft.engine.EngineClassLoaderNonVersionable: ! NVCL CREATED at:
com.kivasoft.engine.EngineClassLoaderNonVersionable@1fbe93
ECS initializing engine class loader instance.
com.kivasoft.engine.EngineClassLoader: EngineClassLoader constructer called
initGDSKey: GDSKey_Base
initGDSKey- just put : com.kivasoft.IGDSKey_Base
key=com.kivasoft.gds.GDSKey@41cd1f
initGDSKey: GDSKey_Root
initGDSKey- just put : com.kivasoft.IGDSKey_Root
key=com.kivasoft.gds.GDSKey@31f71a
initGDSKey: GDSKey_Current
initGDSKey- just put : com.kivasoft.IGDSKey_Current
key=com.kivasoft.gds.GDSKey@5601ea
initGDSKey: GDSKey_CurrentEngine
initGDSKey- just put : com.kivasoft.IGDSKey_CurrentEngine
key=com.kivasoft.gds.GDSKey@17d257
context= com.kivasoft.context.Context@6ee36c
resolve property: GX.path.class GX_CLASSPATH SYSTEM_JAVA null
resolve value: /opt/iplanet/ias6/ias/APPS
resolve property: GX.path.class.core GX_CLASSPATH_CORE SYSTEM_JAVA
java.;com.kivasoft.;gx.
resolve value:
java.;com.kivasoft.;gx.;com.netscape.;javax.;netscape.ldap.;netscape.tooluti
l.
resolve property: GX.versionable GX_VERSIONABLE SYSTEM_JAVA
com.kivasoft.engine.IVersionable
property not in GDS
resolve value: com.kivasoft.engine.IVersionable
resolve property: GX.all.versionable GX_ALL_VERSIONABLE SYSTEM_JAVA 0
property not in GDS
resolve value: 0
resolve property: GX.taskmanager.period GX_TASKMANAGER_PERIOD SYSTEM_JAVA 10
property not in GDS
resolve value: 10
resolve property: GX.versionable.if.extends GX_VERSIONABLE_IF_EXTENDS
SYSTEM_JAVA javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
property not in GDS
resolve value: javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
resolve property: GX.versionable.if.implements GX_VERSIONABLE_IF_IMPLEMENTS
SYSTEM_JAVA javax.servlet.Servlet
property not in GDS
resolve value: javax.servlet.Servlet
class_dir 4 AppPath: /opt/iplanet/ias6/ias/APPS/compiled_jsp
loading component...{7ee76a00-a999-11d1-a16f-006097594151}
getting threadLocal obj
loading component...{91f29740-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread loaded by primordial CL
registered module... com.kivasoft.IModuleThread
loading component...{91f29620-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
loaded by primordial CL
loading component...{ed049d80-b936-1548-e481-080020721767}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
loaded by primordial CL
EJBBinder: binder is GOOD..
EJBBinder: context set obj for IID_IGXEBBinder
loading component...{a84f0507-a912-11cf-aa6c-524153480000}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
loaded by primordial CL
registered module... com.kivasoft.IGDSModule
loading component...{c70f2c00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
loaded by primordial CL
loading component...{c70f2d00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{c70f1a00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule loaded by primordial CL
registered module... com.kivasoft.IPrincipalModule
loading component...{35069f7a-0a09-1406-8f1a-0800208055c0}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37500-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37540-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{be5cfde0-cd9e-11d1-94aa-0060083a5082}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule loaded
by primordial CL
registered module... com.kivasoft.IEBModule
The current input file= testdb.xml
About to start xml -> descriptor conversion process
xmlToDescriptor- file name=testdb.xml
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
servlet name = testdb
!!! parseWebAppFromDOM() just put in setServlet name = testdb
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
!!! handleIASServlet(): Get servlet name= testdb
AppComponentDescriptor: com.netscape.server.deployment.WebAppDescriptor
All EnvEntries name:
All Ejb-refs:
All Resource-refs:
WebApp package name = testdb
Enter setupPluginInfoInGDS()
creating ServletPatternTrans entry, url= /testdb
webapp ContextRoot= null
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
[01/Nov/2001 16:00:04:5] info: GDS-007: finished a registry load
--- now put Web-app component descrptor into GDS
webAppName = testdb
Enter getAllServlets,registeredServletNames.size= 0
Enter getAllServlets,registeredServletNames.size= 0
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@540408
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getClassImpGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Now do some verification step and regenrate the web-app.xml.out file from
GDS data
getWebAppGDSKeyByPackageName: name to match= testdb
got key to webapp= testdb
enter WebAppCompGDSUtil.getDescriptorFromGDSByKey()
About to process the <servlet-mapping> element
GDSvalue name= /System/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /System/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /System/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /System/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /System/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /System/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /System/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /fortune/fortune
GDSvalue val= FortuneServlet
GDSvalue name= /web/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /web/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /web/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /web/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /web/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /web/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /web/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /web/AdderAlias
GDSvalue val= AdderServlet
GDSvalue name= /testdb/testdb
GDSvalue val= testdb
getServletMappingFromGDS: url= /testdb, servlet= testdb
About to process the context-param
[01/Nov/2001 16:00:06:7] info: GDS-007: finished a registry load
About to process the mime-mapping
About to process the servlets
GDSvalue name= testdb
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
GDSvalue name= testdb.jsp
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
The returned hashtable for servlets have: 2 entries
About to process the servlet name= testdb.jsp
About to process the servlet name= testdb
About to process the tld
The returned vector for taglib have: 0 entries
Finished getting a wd from gd s!!!
Now ready to write out WebApp xml file
descriptorToXml: about to get all servlets
Enter getAllServlets,registeredServletNames.size= 2
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
Enter getServletFromGDS
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@76c74b
load-on-startup value from GDS= 0
number-of-singles value from GDS= 10
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
write Xml to output file: web.xml.out
Finished writing out j2ee xml file
Enter getAllServlets,registeredServletNames.size= 2
write Xml to output file: ias-web.xml.out
Finished writing out IAS xml file
Extracting JSPs from testdb.xml to /opt/iplanet/ias6/ias/APPS/
Processing input WAR 1
Processing input WARi 21 testdb.xml
Encountered exception java.util.zip.ZipException processing input file testdHi,
What is the version of app server on HP UX ? How did you deploy on the app
server in HP UX using command line deployment or GUI tool ? Where are these
errors shooting from, are these coming at the time of deployment or thrown at
runtime ? What is the application type that you are trying to deploy ?, if
possible send me the kxs and kjs log files please.
Regards
Raj
lu yanqiang wrote:
My application work fine in iAS SP3 for Win2000, but when I deployed it to
HP-UX 11.0, It can not regist the application in HP-UX.
can any onr help me, thanks
Lu yanqiang
the error message is:
HotSpot VM warning: Setting of property "java.compiler" is ignored
creating engine class space...
loading jx2util...
loading jx2util...done
Connected to LDAP server on websvr.sh-catcher.com port 389
com.kivasoft.engine.EngineClassLoaderNonVersionable: EngineClassLoader
constructer called
com.kivasoft.engine.EngineClassLoaderNonVersionable: ! NVCL CREATED at:
com.kivasoft.engine.EngineClassLoaderNonVersionable@1fbe93
ECS initializing engine class loader instance.
com.kivasoft.engine.EngineClassLoader: EngineClassLoader constructer called
initGDSKey: GDSKey_Base
initGDSKey- just put : com.kivasoft.IGDSKey_Base
key=com.kivasoft.gds.GDSKey@41cd1f
initGDSKey: GDSKey_Root
initGDSKey- just put : com.kivasoft.IGDSKey_Root
key=com.kivasoft.gds.GDSKey@31f71a
initGDSKey: GDSKey_Current
initGDSKey- just put : com.kivasoft.IGDSKey_Current
key=com.kivasoft.gds.GDSKey@5601ea
initGDSKey: GDSKey_CurrentEngine
initGDSKey- just put : com.kivasoft.IGDSKey_CurrentEngine
key=com.kivasoft.gds.GDSKey@17d257
context= com.kivasoft.context.Context@6ee36c
resolve property: GX.path.class GX_CLASSPATH SYSTEM_JAVA null
resolve value: /opt/iplanet/ias6/ias/APPS
resolve property: GX.path.class.core GX_CLASSPATH_CORE SYSTEM_JAVA
java.;com.kivasoft.;gx.
resolve value:
java.;com.kivasoft.;gx.;com.netscape.;javax.;netscape.ldap.;netscape.tooluti
l.
resolve property: GX.versionable GX_VERSIONABLE SYSTEM_JAVA
com.kivasoft.engine.IVersionable
property not in GDS
resolve value: com.kivasoft.engine.IVersionable
resolve property: GX.all.versionable GX_ALL_VERSIONABLE SYSTEM_JAVA 0
property not in GDS
resolve value: 0
resolve property: GX.taskmanager.period GX_TASKMANAGER_PERIOD SYSTEM_JAVA 10
property not in GDS
resolve value: 10
resolve property: GX.versionable.if.extends GX_VERSIONABLE_IF_EXTENDS
SYSTEM_JAVA javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
property not in GDS
resolve value: javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
resolve property: GX.versionable.if.implements GX_VERSIONABLE_IF_IMPLEMENTS
SYSTEM_JAVA javax.servlet.Servlet
property not in GDS
resolve value: javax.servlet.Servlet
class_dir 4 AppPath: /opt/iplanet/ias6/ias/APPS/compiled_jsp
loading component...{7ee76a00-a999-11d1-a16f-006097594151}
getting threadLocal obj
loading component...{91f29740-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread loaded by primordial CL
registered module... com.kivasoft.IModuleThread
loading component...{91f29620-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
loaded by primordial CL
loading component...{ed049d80-b936-1548-e481-080020721767}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
loaded by primordial CL
EJBBinder: binder is GOOD..
EJBBinder: context set obj for IID_IGXEBBinder
loading component...{a84f0507-a912-11cf-aa6c-524153480000}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
loaded by primordial CL
registered module... com.kivasoft.IGDSModule
loading component...{c70f2c00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
loaded by primordial CL
loading component...{c70f2d00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{c70f1a00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule loaded by primordial CL
registered module... com.kivasoft.IPrincipalModule
loading component...{35069f7a-0a09-1406-8f1a-0800208055c0}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37500-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37540-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{be5cfde0-cd9e-11d1-94aa-0060083a5082}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule loaded
by primordial CL
registered module... com.kivasoft.IEBModule
The current input file= testdb.xml
About to start xml -> descriptor conversion process
xmlToDescriptor- file name=testdb.xml
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
servlet name = testdb
!!! parseWebAppFromDOM() just put in setServlet name = testdb
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
!!! handleIASServlet(): Get servlet name= testdb
AppComponentDescriptor: com.netscape.server.deployment.WebAppDescriptor
All EnvEntries name:
All Ejb-refs:
All Resource-refs:
WebApp package name = testdb
Enter setupPluginInfoInGDS()
creating ServletPatternTrans entry, url= /testdb
webapp ContextRoot= null
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
[01/Nov/2001 16:00:04:5] info: GDS-007: finished a registry load
--- now put Web-app component descrptor into GDS
webAppName = testdb
Enter getAllServlets,registeredServletNames.size= 0
Enter getAllServlets,registeredServletNames.size= 0
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@540408
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getClassImpGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Now do some verification step and regenrate the web-app.xml.out file from
GDS data
getWebAppGDSKeyByPackageName: name to match= testdb
got key to webapp= testdb
enter WebAppCompGDSUtil.getDescriptorFromGDSByKey()
About to process the <servlet-mapping> element
GDSvalue name= /System/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /System/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /System/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /System/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /System/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /System/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /System/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /fortune/fortune
GDSvalue val= FortuneServlet
GDSvalue name= /web/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /web/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /web/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /web/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /web/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /web/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /web/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /web/AdderAlias
GDSvalue val= AdderServlet
GDSvalue name= /testdb/testdb
GDSvalue val= testdb
getServletMappingFromGDS: url= /testdb, servlet= testdb
About to process the context-param
[01/Nov/2001 16:00:06:7] info: GDS-007: finished a registry load
About to process the mime-mapping
About to process the servlets
GDSvalue name= testdb
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
GDSvalue name= testdb.jsp
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
The returned hashtable for servlets have: 2 entries
About to process the servlet name= testdb.jsp
About to process the servlet name= testdb
About to process the tld
The returned vector for taglib have: 0 entries
Finished getting a wd from gd s!!!
Now ready to write out WebApp xml file
descriptorToXml: about to get all servlets
Enter getAllServlets,registeredServletNames.size= 2
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
Enter getServletFromGDS
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@76c74b
load-on-startup value from GDS= 0
number-of-singles value from GDS= 10
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
write Xml to output file: web.xml.out
Finished writing out j2ee xml file
Enter getAllServlets,registeredServletNames.size= 2
write Xml to output file: ias-web.xml.out
Finished writing out IAS xml file
Extracting JSPs from testdb.xml to /opt/iplanet/ias6/ias/APPS/
Processing input WAR 1
Processing input WARi 21 testdb.xml
Encountered exception java.util.zip.ZipException processing input file testd -
Gateway error - Program not registered
Hello,
We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
LOCATION SAP-Gateway on host gisrxx / sapgw00
ERROR program SBCX not registered
It's an ECC 6.0 system.
I found SAP note - - 353597 - Registering a RFC program
I executed the following command as sidadm
rfcexec -aSBCX -ggisrxx -xsapgw00
But the command keeps on running on teh command prompt.
And for that duration the RFC works.
But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
Could you tell what needs to be done to resolve this issue?
Regards,
Gautam.Hi Gautam,
Please run the program in background (Unix) or as a service (Windows).
Please go through the following forum post. This should help.
Run rfcexec as service on windows
Br,
Venky -
RFC : Transaction Program not Registered
Hi Folks,
We have registered the server program from the middleware onto SAP R/3 System and is successfully registered as per the logs. As a next step, we have logged into R/3 System, SM59, in the RFC destination (Type TCP/IP) after specifying the registered program, we have tested it(Connectivity test). The test is positive and connectivity is established successfully.
The solution was working for months and suddenly connectivity is broken.
To restore the connection, we have repeated the steps, registered the server program, tested and everything is fine.
But when we have pushed a new message, then onwards the RFC destination shows an error. "TP is not registered", Return Code 679. That is when the first message is pushed, it is de-registering the server program and running into error. All the messages got stuck in SM58 with status 'Error when opening an RFC connection'.
RFC trace shows
ERVER> Caller transaction code: (Caller Program: SAPLQOWK)
ERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered.
Please let me know for any inputs.
Thanks, SurajMy problem got solved. In the middleware, when TRFC connection is made, it has created a lock entry during the time, system was brought down for maintenance activity. When the system is brought up, then as the connection lock entry is available, then it deregistered the server program and not able to establish further connection.
To resolve the issue, we have just deleted lock file and registered server program from middleware. This time the connection was established successfully and could able to restore the message flow.
Thanks, Suraj -
TREX7.1 - Program not registered
Hi to all experts,
I am implementing TREX7.1 revision 36 (latest) which is standalone, but I encountered the error - program not registered while creating the RFC connection in admin tool. Previously the connection was working but it happens when I switched the RFCSERVER to "single thread (all hosts), deleted the old RFC connection and recreate the new one.
I have tried the following methods:
1. removed TREX and reinstall it again.
2. executed rfcexec u2013g<program id> -a<gateway host name> -x<gateway service> (it seems like nothing has been changed) - I registered it in SAP server, am I correct?
Thanks in advance.
BR,
NancyHi to all experts,
Problem solved once i restarted the SAP server and recreated the RFC connection in TREX server.
Another issue now, when i run the "python runInstallationTest.py", error occurs as below:
--> Check 01: Ping TREX Services
++----
++----
++----
STEP ³³ ACTION ³³ SPECIFICATION ³³ RESULT
++----
++----
++----
++----
++----
++----
Traceback (most recent call last):
File "/usr/sap/TX1/TRX01/exe/python_support/testbase.py", line 709, in run
ret = self.runHandler(*rest, **self.extractInheritedArgs(keys))
File "runInstallationTest.py", line 710, in runHandler
TREX_SHOW_STOPPER, webserver_unreachable, IS_QUEUE_SERVER = ps.ping()
File "runInstallationTest.py", line 275, in ping
services = HostPort4Services().getHostPort4Services()
File "runInstallationTest.py", line 88, in __init__
self.srvs = Services().getServices()
File "runInstallationTest.py", line 69, in getServices
content = Content('TREXDaemon.ini')
File "runInstallationTest.py", line 33, in __init__
self.content = self.getContent()
File "runInstallationTest.py", line 42, in getContent
raise RETURN_CODE(2, msg=msg)
RETURN_CODE: RC_NO_SETTINGS
No SAP_RETRIEVAL_PATH set in environment.
---> TEST ABORTED !!!
Is this test run very important? Any idea what is this problem about?
Many thanks in advance!
BR,
Nancy -
SAPSLDAPI_UNICODE program not registered
Hi,
Iam making RFC unicode connetion in XI3.0 , i gave corect deatils when i test connection system gives error" program not registered".
But when i execute LCRSAPRFC_UNICODE its success.Not sure why SAPSLDAPI_UNICODE giving error. I have maitained the entrys in visual administrator. Even then same problem
1. Execute transaction SM59 in the business system.
2. Choose Create.
3. Enter at least the following:
¡ RFC destination: SAPSLDAPI
¡ Connection type: T
¡ Description: SAPSLDAPI
4. Choose ENTER.
5. Choose the Technical settings tab page and do the following:
a. In the Program ID field under Registered Server Program, enter SAPSLDAPI _UNICODE.
Please suggest for this connection.
-CheersAlso..in the Visual administrator see that the destination details are correct....it doesnot seem as if the program got registered to the sap gateway.....
From the Visual Administrator for the destination, pls do a Save & Test...
Thanks,
Renjith -
RFC Error: Program not registered
Hi,
We are presently facing issue with our GTS (Quality) and Seeburger system RFC connection. While doing the testing we are getting error as below:
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: TESTUSER (Client: 202)
Destination: SEEBURGER_RFC (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SEEBURGER_RFC
HOST =%%RFCSERVER%%
PROG =BIS_ABC_202_DEV
GWHOST =ABC.XYZ.STU.com
GWSERV =sapgw15
I have checked RFC connection is fine. Also production systems connection are working fine.
Can anyone please help me out where to look in GTS or Seeburger to check about this issue and correct it.
Thanks & Regards,
ManishHi Sunny,
Thank you for your suggestion, actually we have tried registration using rfcexec and it works fine.
BTW, we have managed to solve this issue by de-activate the IDoc receive & send modules of websap component and activate them again.
Thanks and Regards,
Nick -
Experts,
I am unable to get connection to IGS.<SID>. I get the following error - "Program IGS.<SID> Not Registered. Secondly When I try to execute SIGS it prompts me "could not reach IGS".
I am able to register with "Rfcexec" successfully, so that i can check via sigw and see that IGS.<SID> is registerd.
But still, when i try to test the connection via sm59 for IGS_RFC_DEST it prompts me the same error.
Any valuable suggestions/comments.
Thanks,
Shailendrait depends on your SAP version. do you see IGS in SAPMMC? if not ,this means that it is standalone and can be shutdown/started with Windows services.
-
Error 'Program not registered' while testing RFC
Hi
I have created a RFC with type T. When I am testing the same through SM59, I am getting error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <program name>not registered
Error Details LOCATION: SAP-Gateway on host xxxxxx / sapgw01
Error Details DETAIL: TP <program name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 6268
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Jan 27 00:56:55 2009
Error Details VERSION: 2
Can anybody help me in this?
Thanks in advanceSomething helpful related to this
The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su - <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered) -
Error 'Program not registered' while testing RFC - SRM to MDM / TCP/IP conn
Hello All,
While testing RFC connection in SRM, we are getting this error. This connection between SRM to MDM. Any inputs will be highly appreciated.
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgw<instance no>
our server OS : windows 2008 server
We are getting error while doing connection test in SRM.
This is sm59 connection (TCP/IP ) connection.
Connection Type: T / RFC destination Name: MDM_API_CATALOG
Registered server program: hostname.MDS
I checked smgw transaction ..Logged on clients...Program id is not showing. Any hint will be helpful.
I Checked this MDM setup also.
MDS setup
In mdm server go to folder F:\usr\sap\DM1\MDS00\config
Open MDM.ini file in notepad
Add the below 2 entries.
SAP RFC Gateways= GWHOST=XXXX.hostnamexxx.xxx GWSERV=sapgw00
Trusted SAP Systems= XXD
This will enable gateway connection between SRM and MDM and will enable trusted connection.
For trusted connections to work, we created a service user called SRM_MDM_API with SAP_ALL in SRM and also created the same user in MDM with Default role.
Error message:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program XXXXXXXXPRD.MDS not registered
Error Details LOCATION: SAP-Gateway on host XXXXXXXXprd.xx.xxxxxxhostname.xxx / sapgw00
Error Details DETAIL: TP XXXXXXXXPRD.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 77326
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME:
Error Details VERSION: 2
Procedure Tried
1) This procedure is for Linux OS - Similarly we tried in Windows OS ( If any procedure is wrong also, Please correct us)
To register the program login into the OS level as sudo su u2013 <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
2)
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su u2013 <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
In order to do above step 2, we could not find saprfc.ini in windows 2008 server. Please let us know path where it will be usually?
3) Already checked the notes sapnote_0000684841
I know that it is generic error..This is happening to specific one of system only.
Thanks
Edited by: saptest2011 on May 20, 2011 5:36 PMHello SM,
Thanks for your quick reply.
Thanks for sharing link for document ie Configure the MDM Administration_cockpit. It is helpful. I read that document.
But still issue remain there.
The same RFC connection works between SRM sandbox to MDM sandbox.
Only issue with SRM Prod to MDM Prod (newly built system)
difference between MDM Prod and MDM sandbox.
MDM Prod runs: Windows server 2008 OS
MDM Sandbox runs: Windows server 2003 OS
Landscape: PI7.1, MDM 7.1 and SRM 5.5, SRM-MDM Catalog 3.0
Even i did os01 tcode ping test using host name (specific IP address) from SRM prod to MDM prod, it is fine.
Thanks a lot for your help.
I checked these notes also
Note 353597 - Registering a server program
Note 44844 - No connection to registered RFC program
Note: in smgw tcode in SRM system, the required program id is not showing in logged on clients
Thanks
Edited by: saptest2011 on May 23, 2011 5:00 PM
Edited by: saptest2011 on May 23, 2011 5:39 PM -
I get the following error when I test an RFC;
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program BIS_TR9.TRFC not registered
Error Details LOCATION: SAP-Gateway on host cpsaput1 / sapgw61
Error Details DETAIL: TP BIS_TR9.TRFC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 21389
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Wed Aug 22 16:33:49 2007
Error Details VERSION: 2
The Gateway monitor connections to clients has this entry:
242 cpamhq-sbg04 BIS_TR9.TRFC Registered Server cpamhq-sbg04 10.5.1.141 Wed Aug 22 16:34:39 2007 Connection OK
This is a copy of a previous system on the same server with a different system number. It has support package stack 10 with kernel patch number 121.
Thanks,
JoeHello Joe,
From the error logs I can make out two things.
Your SAP resides on cpsaput1 while external program resides on cpamhq-sbg04 .
Now you have done a system copy on cpsaput1 from a SAP system which was connecting fine to the RFC. That connection was going through because SAP details for the old server were correctly maintained at cpamhq-sbg04 but the same has not been done for cpsaput1 . Ask the adminsitrators for cpamhq-sbg04 to make settings for cpsaput1 and then try RFC again.
Regards.
Ruchit. -
Error 'Program not registered' while testing RFC connection PI_RFC
Hi Basis Experts
I am having problems while testing an RFC connection PI_RFC in one of our PI quality system.
Here is the Error log
Logon Connection Error
Error when opening an RFC connection
ERROR: program PI_RFC not registered
LOCATION: SAP-Gateway on host bp1xeuaa202 / sapgw01
DETAIL: TP PI_RFC not registered
Details COMPONENT: SAP-Gateway
COUNTER: 15866
MODULE: gwr3cpic.c
Details RETURN CODE: 679
We tried restarting the JCO-RFC provider service in VA,also tried restarting the Gateway service, tried registering the RFC using below command
rfcexec u2013g PI_RFC -a bp1xeuaa202 -x sapgw01
rfcexec u2013D PI_RFC
the command didnt gave any output also in SMGW tcode we didnt get the entry(PI_RFC) under system type as registered server.
Also we tried changing the Gateway hostname and service name in SM59.
Still we are facing the same issue, can anyone please help us in resolving this issue.
Regards
SyedHi,
It seems to like problem with your program is not registered. As suggested by spantaleoni, you can go through.
Here Program Id must be case sensitive. Once again check with your program Id.
And, you have to register your program id in Visual Administrator.
Goto Visual Administrator:
In that Select Cluster>Server>Services-->JCo RFC Provider
Then enter the Program Id and gw host & service.
Hope this helps to you.
Regards,
P.Rajesh
Maybe you are looking for
-
Problems and solutions for 9i DB R2 install on Redhat Linux AS 2.1
Installing 9iDB R2 9.2.0.1.0 on Redhat Linux Advanced Server 2.1 (aka Redhat Enterprise Linux (AS)) and applying patchset 2 (9.2.0.3.0) This is a certified platform but I hit many problems getting the install to work. Here are the problems I hit and
-
Mac no longer sees old external drive, or new external drive
I have been using a Seagate external drive for months. All of a sudden, my Mac doesn't see it in Finder (Or Disk Utility), and no longer mounts it. I bought a new Drive today and when I plugged it in, my mac doesn't see the new drive either. (WD My B
-
Trying to understand compareTo()
Hello again world. Please excuse my thickness. I have two issues with the compareTo() method which I think are unrelated. I have an array of "Employee" objects. The array is called "emp" which I sort in main]/b] with the call [b]Arrays.sort(emp) and
-
Not compatible with OS X 10.5.8 on pre-Intel processor
I downloaded Firefox and when I tried to open it a message said it was not compatible with this architecture. I am running on a Mac mini with a pre-Intel processor and OS X10.5.8
-
Dreamweaver Editor Selection Color
I just upgraded from WinXP to Win7. After a fresh install of Dreamweaver, I've got almost everything setup the way I had it before. With one fatal exception. For some reason, now when I'm in a code window it highlights the line numbers with a BRIGHT