Text Graphics Templates!

Does anybody know good templates to use to create Text Graphics such as this?
http://www.youtube.com/watch?v=TxnbXJMZ3Dg&list=PLYy8zMVbpeFQWQbjBmaoGVDrAO7f054 JS
Just looking to add some life to my text without re-inventing the wheel.
I use FCP7 & Motion 4....dont have After Effects!

Have you seen this: http://www.youtube.com/watch?v=OggpZ2-2vWY&list=PLYy8zMVbpeFQWQbjBmaoGVDrAO7f054 JS
-DH

Similar Messages

Conditional text & graphic

Using FM 9.0 p250, I have an anchored frame on a master page which I've made conditional. It's got some text and a graphic in it. When I'm viewing the master page, I can show or hide it just fine. But when I move it over to the "show" side, it shows on my master page, but not on my body page. What am I doing wrong?

northgrum1 wrote:
Using FM 9.0 p250, I have an anchored frame on a master page which I've made conditional. It's got some text and a graphic in it. When I'm viewing the master page, I can show or hide it just fine. But when I move it over to the "show" side, it shows on my master page, but not on my body page. What am I doing wrong?
You can create two kinds of text frames on body pages, master pages, and in anchored frames.
* A "tagged" text frame displays "Flow: A" or some other letter in the tag information area at the left end of the document page's status bar that's at the bottom of the page, when you click a text insertion pointer in it.
* An "untagged" text frame does not display a flow name.
* On a body page, text frames can be placed on the page, or inside other frames. When either kind of text frame is pasted from the clipboard with an insertion point in a text frame, an anchored frame is created, and the pasted frame appears inside the anchored frame. On body pages, both kinds of text frames act as you'd expect - text in them appears in them, is editable, and can be shown/hidden by manipulating conditions.
* On a master page, things are very different:
- A tagged text frame (Flow: A, etc.) is considered to be a template (model) that creates a duplicate text frame - same size, same location, same color, etc. - on the body page that's controlled by that master page. This us the usual way that the "live typing areas" are created on FrameMaker body pages - a template text frame on a master page controls it.
- Tagged text frames on master pages are templates for body pages; they do not display their content on body pages; they only create a same-size frame in the same position on the body page. (Try it and repeat this mantra until you get it.)
- Untagged text frames on master pages are not editable on body pages; they are backgrounds that appear on the body pages controlled by the master page. (Try it and repeat until it sinks in.)
Your master page text frame is probably a template (Flow: A) text frame; it appears on the body page with a live typing area, but it does not display its content - text, table, anchored frame, etc. This property makes it easy to store documentation in the master page template text frame so it's always carried with the document; however, it's not helpful to users who don't know how to display master pages. The condition setting show/hide makes no difference in this situation; the conditionalized text in the tagged master page text frame doesn't appear on the body page controlled by the master.
One other possibility is that you created the frame on a master page that's not used on the body page(s) you're viewing. For example, the master page text frame may be on the Left master page of a double-sided document, and you've only got one body page so far, page 1, which by default uses the Right master page.
When you create a text frame on a master page, FrameMaker displays an alert that asks you to choose whether the new frame should be background - they show on the body pages and are typically used for headers and footers, etc. - or template, and if template, you can specify a Flow label like "A" or "ChapterOpener," to identify it. You can also specify Autoconnect, the property that causes new pages to be created when you type past the end of an autoconnected tagged frame on body pages.
Read more about master pages, tagged text frames, background text frames, template text frames, headers and footers, flow tags, and autoconnect in Help, and in Google searches that include FrameMaker in the term.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

HP PhotoSmart C309g Printer no longer prints Black Text, Graphics, etc

Hi:
We have an HP laptop.
We have an HP PhotoSmart All-In-One C309g Wireless printer/scanner/copier.
It has been working fine for a couple of years, until 2 days ago.
It will no longer print anything in black (colors and Photo Black work fine).
We have taken it apart...removed all ink cartridges, removed the cartridge caddy,
cleaned all electrodes, replaced the caddy, installed 5 (all) new cartridges,, etc.
We went through the process of removing the cartridges, caddy, shutting down,
removing the AC cord, waiting for several minutes, then doing the reverse process.
When we turn the printer on, it does its auto-check/install, and after about 4-5 minutes
tells us that the installation failed, the to press the OK button.
We went thorugh this process several times, and the installation failed every time.
In the past, installing printer cartridges, cleaning, calibrating...executed quickly.
The printer will not print anything that is Black, whether it me a print from Word, Notepad,
doing a direct copy from the glass, etc....both, with the laptop On or Off, but it will not
print anything in standard Black.
The colors and Photo Black print fine, but the regular Black does not.
The output from the other 4 cartridges are sharp, crisp, etc.
Anything... text, graphics, etc., in standard Black does not print.
Any ideas.
Thank you
-DaleBr
This question was solved.
View Solution.

The troubleshooting steps in this document may help resolve the issue of black not printing. If not see the post here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Text graphics are not clean in Encore playback

I have a project that is all text graphic from a PowerPoint and no matter how I put them into Encore, they don't play back clean. I have made PNG, PSD, JPG and I even redid all the text in Premier Pro. All the same results. I have done this many times before but now nothing seems to work. Looking for answers.

Where can I look for that?
On Wed, Jul 16, 2014 at 10:32 AM, John T Smith <[email protected]>

A way to undo Formatted Text & Graphics OCR from Acrobat 7?

Over the course of a few months, my company received a large number of PDF files for a project for which the internal policy was that every file should be text searchable. Unfortunately, we did not save the native files in any sort of convenient way, having at that time not realized that failing to do so was a very bad idea. We ran OCR on every one of the files that we received, which total approximately 4,000. At the time that we received the majority of these files, my company was still using Acrobat 7; we've since upgraded to version 8.
Recently we discovered that there were discrepancies between our electronic copies and the hard copy printouts from which our electronic copies had been generated: in the electronic copies, uppercase F had changed to P, S had changed to 8, etc. We eventually worked out that it must have been that at some point a computer was mistakenly set to run OCR using the Formatted Text & Graphics setting, as opposed to either Searchable Image or Searchable Image (Exact). This was absolutely not want we wanted, as for our purposes using a type of OCR that causes the original images to change essentially renders the files useless. My questions, then, are the following:
1) As I asked in the title, is there any way of undoing Formatted Text & Graphics OCR that was performed in Acrobat 7?
2) Is there a way of identifying files that have had Formatted Tex & Graphics OCR performed on them (something stored in the metadata)?
Rebuilding these files from scratch is going to require a gargantuan effort, so any help would be much appreciated.

Hi,
Bernd's been across the mountain and seen the bear; so, you can bank on what he posted.
But, just because, I'll second his "no".
Formatted Text and Graphics (Acrobat 7, 8) and ClearScan (Acrobat 9, X) effectively replace the image of textual characters.
If a character is not recognized as 'something' a bit map is of the thing is left behind.
Now, while Acrobat or other OCR engines (Abbey FineReader, AdLib, Adobe Capture, etc.) are really rather impressive no OCR engine has 100% accuracy 100% of the time. Other variables come into play (scan lamp age/brightness, platen cleanliness, scanner mechanicals cleanliness, calibration of scanner, hard copy 'quality' (characters' darkness density, contrast between characters and background, presence of lack thereof of boxed in text, text in or adjacent to line arcs/circles, etc.).
All of that is for semantic content that is "textual". Semantic content that is not textual (but, coincidently may contain text) provides little to no useful OCR output (e.g., graphs, drawings, etc.). Validate this by performing OCR on such a PDF then Export to a plain text file. Print this file out and compare that to the source paper or the scanned image.
There is no metadata info that identifies the OCR mode used.
Perhaps something buried in the bowls of PDF page description content; if so, not intrinsically easy to obtain.
My suggestion (fwiw) - move forward with re-scan.
A server product would help to move it along but a high speed scanner hooked to a local machine (with ample resources) and Acrobat Pro 8 or 9 get it done. With Acrobat 8 or 9 use Search Image (Exact). In Preferences check the category Create PDF or TIFF to assure it is what you desire. Check Acrobat's scan presets to assure you have what you want vis-a-vis Compression and Filtering. Do avoid "Automatic".
Be well...

Text in template in ECC 6.0

Can i know how to enter text in template in ECC 6.0

Double click on the template and u would get the otion of u would get the row number and column to be filled.
there u can fill it

Text in template for ECC 6.0

can i know how to enter a text in template in ECC 6.0

hi Harsha
Its just the same you do it in 5.0.
Create a template ,in that create one line type (R1).
after that right click on template ->create text.
for this text give the name and under the Output Options TAB at the bottom you will c Output structure where you also will c Line and column ,just fill in the linetype( R1) nd the column no (eg 1 if it is the first cell ).
I hope this will be of ny help.
Reward points if helpful.
Regards
Zarina

COMBINED TEXT & GRAPHICS QUALITY

I'm looking at buying a high-end colour laser like the Xerox 7750 or Ricoh 7200. I've got a few questions about colour lasers in general (see my other recent posts). Feel free to offer any comments about:
COMBINED TEXT & GRAPHICS QUALITY
My HP scanner has options that optimise the scanning quality for text, graphics or both. ie it appears there is no one setting that scans a mixed page at the best quality. I've noticed on reading printer manuals that some also offer different print settings for graphics and text. Do colour lasers print text in an inferior way if there are graphics on the same page; and vice versa? Or should text quality (and graphics) stay the same no matter what else is on the page? Assume the text is sent to the printer as actual text (not rasterised in the application).
In the Ricoh 7200 manual it states: "If text & graphics are blurred, select Text Priority under Graphic Mode from the Maintenance menu and then print."
There is no more explanation, but when I saw that I immediately thought: if I select Text Priority is text quality somehow improved at the expense of graphics quality? Do lasers have this limitation?
Thanks in advance for any comments.

Import the TIFF into a pdf, you can use the Text Recognition tool page by page. Personally, I prefer for a job like your to use a dedicated OCR program that lets me designate which parts of the page should be considered graphics and which are text that needs to be OCRd.

Copying a Text Graphic

Hello,
I just picked up on a Flash project at work from our previous web designer who has since left the company and I know nothing about Flash so I am going to try my best to explain my problem.
The client has requested some information be added to one of the sections of the web page which would involve a vertical scroll bar because it can not all fit in the pre-determined area for text. It will be added under jobs. Under the legal section the text runs outside of the area and has a scroll bar effect applied to it. Can I copy the legal text graphic, delete the old jobs text graphic, place the job text in the copied legal text graphic and then name it as the like the original text graphic that I deleted and have it all work without any problems?
This might be a little bit hard to understand so I included a picture to show you maybe what I am talking about?
thanks
garrett

I am not clear on what you have in front of you, but if the text is a graphic of text, then you should be able to directly replace that graphic with a new graphic in whatever object is holding it.
If that section only holds text, you may find it is a textarea that has a scrollbar enabled for it, wherein the text is likely defined in the actionscript code (which means you could edit the text... a graphic isn't involved).
What I recommend is that you make a copy of the file so that an original is retained. Use the copy to experiment with making changes.

Creating text filed template

Hi,
is it possible to change some attributes of Text Filed (HTML INPUT) for all text fields in application? To do something like CSS but for JS? I can’t define something like Text Field Template in Theme edit option.
I want to automatically trim values of every Text Field. I’m thinking about adding to every INPUT, onBlur action, that invokes Java Script function trim(), but how to do this Template-like?
Regards,
Przemek

Hi,
Firstly, you could look into the User Interface Defaults (in Shared Components) as this will allow you to do some things with table fields.
However, I would suggest that something like trimming fields should actually be done by a SQL trigger on the table, or a page process. Obviously, once templates exist, you could add javascript to them - but I would suggest that the templates are more for layout and styling??
Andy

Tutorials on Text Graphics

Hi,
Anyone know of some good tutorials or sources that'll provide information on how to create good text graphics?
I'd appreciate it. Thanks!

No. But needless to say there were some interesting art in there though.
What I meant was how to create nice looking text graphics using Photoshop's Horizontal Type Tool (T).
Thanks anyway!

Text & Graphic from Print Module

I bought Lightroom to help grow my Events business, we print on the night, we have an Awards night to shoot soon.
We would like to have a graphic (Logo) and Text naming the type of Award.
Would somebody please help and explain how to achieve this.
As I understand how the Print Module works, It's one or the other. I know that I could use the Watermark function to add the text, but this would be OVER the image.
Is there a way to design the template then import to LR? I cannot see a way in PS!
Any help or advice would be great .
Thanks.

I could see that being useful too. As it may not make the final release, and we wouldn't want the request to get lost in beta land, might I suggest adding it as a suggestion on the Feature Request forum http://feedback.photoshop.com/photoshop_family where it can easily be tracked? If you post the link to your request here, others can also vote on your request. If you search there, you may even find similar requests that you might like to add your vote to.

Can I add specific text to Template via pop up text box on opening file?

In most word processors it is possible to create a template that asks you for specific text when you open it, so that you can have the letter three quarters written within the template, and only need to replace names, addresses, date and so on.
In Lotus WordPro for instance, before I even see the file, I have to fill in a dialogue box with the persons name, the subject of the letter, and four or five specifics unique to them. The WP then adds this info into the letter, and all I need do is to occasionally write a further full paragraph.
How do I do this in Pages? I can't seem to find anyway to do it at all. I have a suspicion I might need Apple Script, but I'm not sure how I can do that. I have a book of how to code, but I don't know where to store the macro, nor to write it yet - the book's just there if I need it.
I want to open the file, and then be asked one item at a time for the personalised answers to questions that occur in every report/letter.
Any ideas?
TIA
Mac

Thanks for your suggestions, Magnus, you really have had a good think for me - I appreciate that!
What I am doing is report writing in which 90% of the report is the same for everyone. Except the cover page with Name and Address details, and Report title; the initial section which is the same for everyone except for specifics such as amount to invest, reason for investment, term to invest over, things like that.
The end of the report is the recommendations section which is where I use freetext to create a bespoke solution - this cannot be automated.
Just automating the cover page and the intro section save me huge amounts of time which I can then use on research and fund analysis, leaving the principles of investment section pretty much the same for everyone, as here I'm describing the principle and theory.
After I created this Report Template my average report creation time went down from about 3 to 4 hours, to about 45 minutes. I guess the automation itself doesn't save as much time as the templating does, but it allows me to concentrate on the important bit and not worry if I have left something out - or in - that changes the overall thrust of the report.
I cannot load Lotus WorpPro on Parallels, nor on Virtual PC, so the lack of automation really is a pain here. I see it as a weakness of Apple products for business, as I am sure Microsoft do which is why they have dropped VBA support for Office 2008.
I have got NeoOffice as well as OpenOffice for Mac on my system, but really they aren't atable enough to use, and the formatting is pretty flaky. It certainly isn't completely consistent with Office itself.
So, I am left with the conclusion that progress only means a reduction in features!
But maybe I'm missing something?
Mac

Problem of texts in template of smartform

Hi experts,
I am using Template in my smartfroms to display the hardcoded texts,
i have 5 columns in template to dispaly 5 hardcoded texts side by side.
under the template i created 5 text elements , each having some data.
but in out put all are coming in first column itself.
Can any body plz tell me where i wrong?
Thanks & regards,
Veena.

HI Veena,
Ensure in the TExt elements that u have created under the templete, you ahve marked the Column and row number correctly. This acn be cheched under - -
Template - > TExt element - > Output option -> Output structure - > Line / Column.
Hope this wud solve ur issue. Revert in case of any questions.
Cheers,
Varna

How do I save a messages in text, NOT template or file?

I want to be able to save an email from outlook, gmail, Hotmail, or any other format as a plain text or rich text message. Several of my emails are readable by TB24, but the only option for saving them is the Template or file. This is fine for those messages already in the mailbox, but if I can read an archived message in TB format, I should be able to save it in the same fashion. I guess a converter plugin is needed or a tutorial on how to properly save emails from other formats. Ex I open a folder containing an email from a past Outlook acct, The email can be deciphered by TB24, (ie it opens it), but when I try to save it to file(which gives options for format), it doesn't respond to my request!! Am I not doing something correctly or does the TB24 program "block" that function because of it is not in the TB24 mailbox? Baffling and frustrating when try to find a particular message from numerous formats. Thanks to all those who know more than I about this.

'''File|Save As|File''' then in the resulting dialogue, choose "text" file type when saving. Of course in doing so you lose all formatting and attachments.
How do you search and index messages when saved as independent and free-standing text files? I keep email correspondence within the email client specifically because the tools to manage and search are effective and efficient. In fact I occasionally email myself something that needs to be preserved simply because as email it is so easy and convenient to find and retrieve. Searching for text in documents in Windows has become a chore.
I'm not at all sure why you want to open email messages from other environments in Thunderbird, only to save them as text files. But have you tried "Edit As New" to see if that will offer other save options?
What format(s) are these other messages from outlook, gmail, windows live saved in then?
Don't forget simple old select all, copy and paste to save message content in any other document type.

Text Graphics Templates!

Similar Messages

Maybe you are looking for