Text in template for ECC 6.0

can i know how to enter a text in template in ECC 6.0

hi Harsha
Its just the same you do it in 5.0.
Create a template ,in that create one line type (R1).
after that right click on template ->create text.
for this text give the name and under the Output Options TAB at the bottom you will c Output structure where you also will c Line and column ,just fill in the linetype( R1) nd the column no (eg 1 if it is the first cell ).
I hope this will be of ny help.
Reward points if helpful.
Regards
Zarina

Similar Messages

Text in template in ECC 6.0

Can i know how to enter text in template in ECC 6.0

Double click on the template and u would get the otion of u would get the row number and column to be filled.
there u can fill it

Testing Template for ECC 6.0

Dear All,
It would be great if someone can share the Testing Scenario template (preferably SAP Template ) for PA, OM, E-Rec, T&D, Time.
Thanks in advance.
Nilesh

hi Harsha
Its just the same you do it in 5.0.
Create a template ,in that create one line type (R1).
after that right click on template ->create text.
for this text give the name and under the Output Options TAB at the bottom you will c Output structure where you also will c Line and column ,just fill in the linetype( R1) nd the column no (eg 1 if it is the first cell ).
I hope this will be of ny help.
Reward points if helpful.
Regards
Zarina

Wrong period values in Text template for upload of Plan data (KP06/KEPM)

Hi,
We are facing an issue in the upload template in text format for Upload of Cost Centre Planning data (Transaction KP06) in ECC 6.0.
We have some User defined layouts for Excel upload of plan data. If we save the file as a text (tab delimited) file, the Period values above the Column"Period" do not correspond to the correct periods in ECC 6.0. for e.g. the values above Period 1, Period 2, Period 3 are shown as 6, 5, 4 instead of the correct values 1,2,3. These values are considered by the system for uploading the Planning value in the appropriate Periods and hence the values entered in the Column Period 1 in the text file are incorrectly uploaded by the system in Period 6 based on the values generated by the system in the text file.
However, we do not encounter this issue in the 4.6C system where the values are correctly shown.
We are facing a similar issue with the text upload template for Sales Planning data in CO-PA (Transaction KEPM), where the values generated by the system do not correspond to the correct period.
Regards,
Rajaram

Hi Christian,
Thanks for the quick reply, i followed your earlier reply in the below thread and resolved the issue. Thanks.
How to delete CO plan data
Hi Ajay,
Thank you, We are uplaoding through KP06, Menu -->Extras --> Excel Planning --> Upload.
Regards,
Raj

Template for O12* WBS long text

Is it possible to create a template for O12* WBS long text. I think SAPscripts can be used. If it can be used can anyone suggest me as how to go about doing it .
Thanks
Edited by: Alvaro Tejada Galindo on May 23, 2008 5:33 PM

Hello,
the way to find it out is that you set a breakpoint into the function module READ_TEXT ( via SE37) and then process a PSP-Element with a long text via CJ12 or CJ13.
The transaction will stop at the breakpoint, an you get the text-id/text-name/ text-object from the input parameters on the function module.
If i try, it says ID = 'LTXT', name = 'E'<PRPS-PSPNR>, object = 'PMS', but for a WBS text there may be other parameters.
If you need the logic in an own programm, you could use the function READ_TEXT instead of selecting texts via STXH/STXL.
Regards Wolfgang

Creating some sort of text template for multiple pictures

Hello, I'm new to the forums and new to photoshop elements. Let me lay out the situation so you have a better idea of what I'm trying to do and why. I work at a real estate office and we are going to hang a tv on the wall and display a slideshow of our homes for sale and ontop of the pictures I am going to add text to each photo with information about the home. I want to be able to add text in the same proportions in the same spot on each photograph. Is there some automatic way of doing this? I will have to hand type different info on each photo. The pictures come from different cameras (each agent takes their own photos) with different resolutions and doing it one by one (ive done just a few out of over a hundred so far) I'm finding out that one size text works on one but when I try to use the same size font on the next photo it's either too big or too small, I guess this is because of the different resolutions of each camera. I know I may have rambled a bit here but if anyone can point me in the right direction I'd be thankful.
If I need to clear up anything I've said let me know.
Thanks

I believe you responded to the wrong posting. Mine is titled "Transferring from MyPictures "
Date: Thu, 17 Sep 2009 14:12:24 -0600
From: [email protected]
To: [email protected]
Subject: Re: Creating some sort of text template for multiple pictures
The font size is correlated with the resolution.
Have you investigated use of Powerpoint to construct a continuous-loop presentation?
"Self-running presentations are a great way to communicate information without having to have someone available to run a slide show. For example, you might want to set up a presentation to run unattended in a booth or kiosk at a trade show or convention. You can make most controls unavailable so that users can't make changes to the presentation. A self-running presentation restarts when it's finished and also when it's been idle on a manually advanced slide for longer than five minutes.
When designing a self-running presentation, you'll want to keep the setting in mind — for example, whether the booth or kiosk will be in an unmonitored public place or whether supervision will be available. The answer will help you determine what elements you add to your presentation, how much control you give users, and what steps you need to take to prevent misuse.
To set up a self-running show: open the presentation, click Set Up Show on the Slide Show menu, and then click Browsed at a kiosk (full screen). When you click this option, Loop continuously until "Esc" is automatically selected."
>

DTW template for Predefined Text

Hi All,
I got a lot of predefined text data and want to import into SAPB1.
Are there got DTW template for Predefined Text? or you got idea how to import Predefined Text into SAPB1 system without using DTW (SDK is not solution for this question)
Thx
KC

Need to define it manually.
Check this link
Purchase Order Predefined Texts

How to change page template for a single page?

I create a new document based on the Pages "Reports > Business Report".
Now the first page is formatted as a "Cover" page with a larger top margin.
Via "Format > Advanced > Manage Pages..." I see there are what I assume are the "Page Templates":
- Cover
- Table of Contents
- Chapter Page
- Text Page
- Appendix
My question: How can I change the template for a single page in my document? E.g. I don't want Page #1 to be formatted as "Cover". I'd like it to be a "Text Page".
Any hints?

Just delete the Cover section and insert a Text Page.
Click on:
+Toolbar > View > Page Thumbnails+
Click on the Cover thumbnail, it will be outlined in yellow, hit delete.
It may start off with certain defaults but you do not have to accept them.
Peter

Need to create stupid proof templates for non-designers

Ok folks, I'm new to this forum having come across it in search of a solution to my problem.
I need to create illustrator template files (.ai not .ait) that customers can download and use to create their own artwork for print. I have to create them in every printable paper format from business cards to A3 posters, folding, non-folding yada yada.
Now, previously, we used an .ai file with a guide layer we created. This guide layer had all relevant info, was named accordingly. It was set not to print and locked. As I tend to use print to file, distiller and all, this has always been perfectly adequate to create my pdfs. Of course, this doesn't work the same way when saving a pdf, which is what most people do. However, customers who wish to download the templates are having some difficulty with the concept of 'make sure you delete the guide layer before saving your pdf'.
For the most part, the customers using these files are not illustrator literate. Even though there are clear instructions to 'delete' the guide layer when saving the needed pdfs, they are failing to do so. This means when the .ai (with the non printable layer) is saved to pdf, the guide layer as a hidden object is saved within the pdf. Upon printing at our printing facilities, the guide layer has been printed with disasterous results.
A possible solution we came up with was to use the ruler guides to create the guide layer. For this solution to work though, I need to be able to use different colours for different guides within the same document. Which we can't. We can only change all the guide colours and they are all the same colour.
Another idea would be to outline text indicating various printable and non-printable areas and making them into guides via View>guides>make guides, which works to an extent but looks messy, especially when viewing the full page and again, isn't particularly distinctive, leading back to having different guides in different colours.
I've come across another possible solution involving template layers. Viewing the resulting pdf seems fine and in all purposes it does what we need, except for when reopening the saved (not printed) pdf back in illustrator, the template layer is still there and I need it gone. The same way it would be if the .ai were printed to postscript and sent through distiller.
My ideal solution would be to have to ability to have the different coloured ruler guides in place throughout my document, but as I previously stated, all guides have to be the same colour and that's useless in this instance.
So, has anyone got any bright ideas. Coincidentally I need to create the same templates for both psd and indesign but I'll cross that bridge when I've figured this out.

Hey Mike, thanks for the response.
1. Not a chance, if, even when the process is described in great detail in an info pdf, available as info on the website (with screenshot instructions) and mentioned in the .ai file itself, they aren't even deleting the guide layer, then turning off 'Preserve illustrator editing capabilities' is kind of a stretch. Like I said, the folks these templates are to be designed for are not illustrator literate for the most part.
2. Not sure if this would work. I'd have to look into it.
3. Beyond my capabilities. I'll let you know if number 2 works.
One possible solution I've come up with uses the idea of a template layer always on top, with 'DELETE THIS LAYER' and screenshot of layers pallette and clear little red arrows etc. If I can the template layer to always remain on top, with their artwork layer underneath, they would have to toggle hide/unhide to view their artwork, and the reminder to remove the guide layer would be pretty much in their face. That's not a guarantee either though.
Personally, I think what I've been asked to achieve is a pretty hard task and honestly, I'm thinking there are no failsafe options.

Rich Text Editor Option for Custom Metadata

Hi,
We have created custom profiles for our clients. In one such profile which was created for news updates, client wants to have rich text editor in case of certain custom metadata fields such as description similar to comments.
As far i as i understand this can be achieved by creating region defintion which gives the option to create a web asset which can edited using site studio api. But is it possible to bring in rich text editor features for custom metadata fields in profiles ?
Regards,
Boopathy P

I'd suggest looking into the profile rule's "Use custom include" option.
You need to build the new control on your own, but you'll be able to plug it in via the "Use custom include" profile rule option. It's on the "Edit Rule Field" page.
You can also override the template, but I believe that's a lil' too hardcoded for best practices. This way, you can create a ckeditor textarea and apply it to any metadata you wish (of course, it's up to you to make sure the datatypes match).
Let us know if this helps!
-ryan

TEXT-DRIVEN WORKFLOW FOR NEWSPAPER

We're a small community newspaper thinking about switching to InCopy (currently using NewsEdit)
All reporters, photographers, designers work in the same office. Most stories are written before the pages are layed out based on the amount of advertising so we would be using a text-driven workflow. I've downloaded a trial version of InCopy CS4 and I'm trying to get a feel for how everything will work between InCopy and InDesign.
Currently the reporters type their stories in templates that show the copy flowing in columns. When these files are brought into InDesign the columns stay and the headers (which are attached) are in a separate text box. The reporters can also attached cutlines to their photos. The designer then just has to import the story and photo into InDesign and resize the two boxes (header and story) and the photo and cutline to fit the space available.
The only way I can find to have 2 text boxes in InCopy is to make an InDesign document and anchor 2 text boxes (one of which is divided into columns) to the Master Text Frame. I then export this as an .incx file, load my stylesheets and save it as a template file.
The reporter then opens the template and inputs the story and header in the appropriate boxes and saves it as an .incx file.
I (the designer) then opens the page layout and places the story. In order to resize anything the story has to be checked out. Then because the boxes are anchored, I have to go to Anchored Object menu, change the Options and then Release. I have to do the same with the photos and cutline.
If I haven't put you to sleep yet, here's my question.
Am I totally out in left field or am I on the right track as to how this should work? Is there a better way to make this work.
Any editorial changes are made on the page by the designer and there's only ever one reporter working on a story, so I think the checking in and out of stories might not pertain to us a lot except for when resizing them when they're on the page.
Also when I draw a text box for a pull quote on top of a story the only way I can change the runaround is to go to Anchored Object menu and release the story text.
Any help or suggestions would be GREATLY appreciated.
Barb

Barbara, I'm sorry but no, you can't have 2 text frames in a native InCopy document. And in the one frame you have to work with, there is no way to divvy it up into columns.
It sounds like you might need one of the CMS's built on top of InDesign and InCopy, like Smart Connection Pro/Enterprise or K4. These systems *do* all you to create multiple-framed "article" templates for the InCopy users, along with other features that the stock IC/ID workflow doesn't. But the learning curve is fairly steep (especially in the beginning) and the cost starts at $20K and goes up from there, not including the cost of ID and IC themselves. Quite a difference compared to the $249 per editorial seat cost of a stock IC/ID workflow.
In that stock workflow -- which most of my clients use, including community newspapers -- editors write everything in the single frame, and yes, the designers then cut and paste as necessary.
A somewhat awkward but doable workaround is that the editors could write the headline on page 1 of the INCX file and then enter a Frame Break from the Type > Insert Break Character menu. InCopy would automatically generate a second page (to create a threaded frame) and put their cursor there. The editors would write the body copy in that frame, or however you want to work it.
Then the designers would have a page set up in ID with a small frame for the headline that's threaded to a multicolumned frame for the body. They'd place the INCX file into the first frame, and it would automatically flow into the 2 frames correctly (assuming the headline fits inside the headline frame, if not, they edit it/format it to fit).
One of the main benefits of the IC/ID workflow is that the editors can see and edit their text within the context of the design, the layout, instead of marking up paper proofs for the designers to enter. Or, it allows the designers to create pages in ID (with empty text frames for heads, body, sidebars, cutlines etc.) for the editors to fill in with their text from the start.
It sounds like you're not looking for this. You're mainly interested in giving the editors a head start in formatting and fitting text without the layout at all. This is a lesser feature of the stock IC/ID workflow. It is most valuable when it's replacing Word as the start of the process. But it sounds like it's no match for what you're able to do with NewsEdit. ;-(
I've had other clients ask me how to create multi-framed templates for the editors to use. I wrote a long article about in my InCopyFlow e-zine, which you can read as a post on my InCopySecrets.com blog here:
http://incopysecrets.com/working-with-layout-templates.php
Maybe that'll help show you what's possible?
AM

How to correct SpryAssets/SpryMenuBar paths in template for sub-directories?

I recently converted my real estate web site to CSS using Dreamweaver CS4. I use a primary template for most of my pages, which have both a horizontal and a vertical spry menu bar. When I create a page with the template and save it in a sub-directory (not at root level), after a page view, I get errors on the server such as:
File does not exist: /home/I_DELETED_THIS/public_html/homes_for_sale/SpryAssets, referer: http://locatehome.com/homes_for_sale/10-2264.htm
(I replaced part of the URL with "I_DELETED_THIS" since this is posted publicly)
The SpryAssets directory is at the root level of my site. The template includes the code further below at the bottom of the source code in a non-editable area of the template, which I think is the source of the problem, especially since I get two error messages for each page view and the SpryAssets directory is referenced twice in the following code after the last div. Part of the code is commented out:
<script type="text/javascript">

</script>
</body>
Can I delete this code from the template or will my menu bars not function if they have sub-menus?
The template changes the file path for other CSS scripts in the head of the template and links, etc. in the body, but not for this section of code. Is there a way to modify my template so that the path files will be correct when a create new pages in sub-directories?
I saw one suggestion in the Forum to another user with a related problem that he should manually change the code in this section of the template to have a file path relative to the root, but it seems that the program should automatically be taking care of things like that.
Many thanks,
Dave K.

<script type="text/javascript">

</script>
No you cannot delete the menu constructors, they are the ones that call the menus. The comment tags are purely for browsers that do not have JavaScript enabled.
As far as template behaviours are concerned, I am afraid that this is not a very helpful forum. You will need to go to the Dreamweaver Forum for that http://forums.adobe.com/community/dreamweaver/dreamweaver_general
I hope this helps.
Ben

PDF Template for XML Report

We are trying to create a PDF Template for an XML Publisher Report using Adobe Acrobat Profession Version. The PDF Template works fine for one employee but when the start and end body tags are inserted in the template, the concurrent process to submit this reports completes in warning.
The OPP Log shows the below details
[6/30/08 1:26:36 PM] [102436:RT20660155] XML Publisher post-processing action complete.
[6/30/08 1:26:36 PM] [102436:RT20660155] Completed post-processing actions for request 20660155.
[6/30/08 2:29:59 PM] [OPPServiceThread0] Post-processing request 20660180.
[6/30/08 2:29:59 PM] [102436:RT20660180] Executing post-processing actions for request 20660180.
[6/30/08 2:29:59 PM] [102436:RT20660180] Starting XML Publisher post-processing action.
[6/30/08 2:29:59 PM] [102436:RT20660180]
Template code: Test123
Template app: XBOL
Language: en
Territory: US
Output type: PDF
[6/30/08 2:29:59 PM] [UNEXPECTED] [102436:RT20660180] oracle.apps.fnd.cp.opp.PostProcessorException: XML Publisher output file not created
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:281)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
I think this is do which how i am creating the PDF Template. When i am not inserting the repearting group tootips then the PDF Template works abosoultey fine for one employee
the text inserted in the Toottip for the start of the repeating group - @{rep_field="BODY_START"}@
Tootip for each repeating row @{rep_field="T1_G1"}@ ,@{rep_field="T1_G2"}@ and so on.
Tootip for end of the repating group @{rep_field="BODY_END"}@

XML Data
<?xml version="1.0"?>

<MODULE1>
<LIST_G_HGL>
<G_HGL>
<EMPLOYER>HWS</EMPLOYER>
<BOX_1>YEN</BOX_1>
</G_HGL>
<G_HGL>
<EMPLOYER>HGL</EMPLOYER>
<BOX_1>YE</BOX_1>
</G_HGL>
</LIST_G_HGL>
</MODULE1>
Further when i tried using the Template Viewer of XML Publisher Desktop with the above XML File and the template i created in Adobe Acrobat Professional (i am mailing the template to [email protected]) , i got the following error
[070808_093926007][][STATEMENT] MergerEngine.modify : template forms value is being changed......
[070808_093926007][][STATEMENT] MergerEngine.modify(String, String, String) block ::: FieldName -> Start , FieldValue ->
[070808_093926007][][STATEMENT] MergerEngine.modify(String, String, String) block ::: FieldName -> End , FieldValue ->
[070808_093926038][][STATEMENT] MergerEngine.modify(String, String, String) block ::: FieldName -> EMPLOYER , FieldValue -> HGL
[070808_093926054][][STATEMENT] MergerEngine.modify : template forms value is changed......
[070808_093926054][][EXCEPTION] java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
     at java.util.Vector.elementAt(Unknown Source)
     at oracle.apps.xdo.template.pdf.RepeatEngine.getGapBetweenGroups(RepeatEngine.java:449)
     at oracle.apps.xdo.template.pdf.RepeatEngine.<init>(RepeatEngine.java:154)
     at oracle.apps.xdo.template.pdf.RepeatEngine.<init>(RepeatEngine.java:101)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1742)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1684)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1445)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1583)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:131)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:73)
     at oracle.apps.xdo.runner.PDFFormRunThread.run(PDFFormRunThread.java:45)
[070808_093926054][][STATEMENT] <--- before calling createContents() --->
[070808_093926086][][STATEMENT] <--- before calling addFontInfoToResources() --->
[070808_093926086][][EXCEPTION] oracle.apps.xdo.template.pdf.exception.FatalException: page Key can't be found to duplicate page......
     at oracle.apps.xdo.template.pdf.RepeatEngine.getDupPageKey(RepeatEngine.java:1421)
     at oracle.apps.xdo.template.pdf.RepeatEngine.composePages(RepeatEngine.java:827)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1743)
     at oracle.apps.xdo.template.FormProcessor.processRepeatableFields(FormProcessor.java:1684)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1445)
     at oracle.apps.xdo.template.FormProcessor.process(FormProcessor.java:1583)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:131)
     at oracle.apps.xdo.runner.PDFFormRunThread.runFormProcessor(PDFFormRunThread.java:73)
     at oracle.apps.xdo.runner.PDFFormRunThread.run(PDFFormRunThread.java:45)
End of Process.
Time: 0.251 sec.
FO Formatting failed.

Can LC Designer produce a flat PDF, not form, as a template for dynamic content?

Can LiveCycle Designer produce a flat PDF, not form, as a template for dynamic content?

Yes that means LiveCycle Designer .....the XDP is an XML file that describes the template that you want. It is turned into a PDF by the Designer as well as the LC Server I mentioned. The Designer creates interactive content (not what you asked for), the server can do the same as well as flat PDFs. I mentioned the batch mode because that is how people generally use it or they use it for real time creation of the reports but it tends to be high volume (it is a server product so it will bepriced that way). You can create an XDP that has text and "floating fields" on it. Floating Fields are special in that you can merge data with the template and once the data is put into the field it is turned into text (non-interactive). This woudl be useful for testing (requires a hands on approach) but if there is any kind of volume that you are looking for this will not be useful. The server side can be automated so that no human intervention is required.
Paul

Building out a template for email notifications

I am working on an email template for emails Managers will receive when someone submits an Urgent Change Control. I am struggling with the some of the fields in the Change Request getting them into the email to the Managers. I want to include as much information
about the Change Request as I can so they can Approve or Reject from the email by replying to the Service Manager mailbox, and do not have to use the Console to see the details.
I am in the Templates node under Administration --> Notifications
Below is just a sample of my template so you can see what I am doing.
Message body
Change request $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Id$: $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity'
SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$, created by $Context/Path[Relationship='WorkItem!System.WorkItemCreatedByUser' TypeConstraint='System!System.User']$?$DisplayName$?, requires your
approval.
You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
Alternatively, you can complete the request by looking up Review Activity $Context/Property[Type='WorkItem!System.WorkItem']/Id$ under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
Title:
$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$
Change Request Description:
$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Description$
Start and End dates:
$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/ScheduledStartDate$
$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/ScheduledEndDate$
Now I can include things like the Title of the Change Request, The Description and Start and End Dates but I would like to add other fields such as:
On the Planning tab
Implementation Plan
Risk Assessment Plan
Test Plan
Back out Plan
When I click on Insert in the template builder, I get a list of items I can select. I have been experimenting with all different selections and nothing seems to work. Is it even possible to capture these fields in a Change Request into an email. I have done
things like copy the text from fields that do work like "Title" and then replaced /Title$ with something like /Backoutplan$ but that doesn't work.

Yes, it's possible. I have no idea if it can be done with the out of the box notification template wizard, though..
You're interested in the change request class, not the work item class. The CR class inherits from the WI class, but the properties you want are defined on the CR class. Therefore, the relationship paths you're using need to be restricted to the CR class
via the Type Constraint. To get the CR's implementation plan property, for example:
$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='CRLib!System.WorkItem.ChangeRequest']/Property[Type='CRLib!System.WorkItem.ChangeRequest']/ImplementationPlan$
The trick is making sure the CRLib reference exists in your management pack. CRLib is just an alias for the System.WorkItem.ChangeRequest.Library management pack reference.
So, when you update your notification template, export the management pack that it's defined in and make sure you add that reference. Re-import the MP and test the notification.

Text in template for ECC 6.0

Similar Messages

Maybe you are looking for