Thick continuous line in smartform output

Hello Experts,
I need to print a thick continuous line in a smart form output. I have to print this after/before specific data that is going to be printed through a template.
can any one through some light on me regarding this?
Regards,
Usha.

hi usha,
There are four options in template tab LOWER FRAME, UPPER FRAME, RIGHT FRAME, LEFT FRAME using these u can get the solution for this thread.
select that particular frame in template and click on specific option.
regards,
sujatha.

Similar Messages

  • HI,Can the smartforms output the windows box as the type of dashed Line?

    My customer let me Print the windows box with the dashed line in smartforms, but i searched many method ,all failed,anybody know how to do it?

    hi,Bala Muthu Raja 
    thanks for your information.
    but i means i want to output the dashed line box for the windows as following......
    ^^^^windows^^^^
    ^^^^windows^^^^
    ^^^^windows^^^^
    ^^^^windows^^^^
    ^^^^windows^^^^
    adjusting the line width just make the box line become wild or thin.
    Message was edited by: shi jack
    Message was edited by: shi jack

  • How to download a smartform output as excel file WITH EXACT LAYOUT.

    Hi,
         I have searched the forum but could not found any satisfactory answer. I have a smartform with a table, some texts and a logo. I have to write a code which will save the smartform output as excel file in the system keeping the layout of the smartform output EXACT.
    i.e., the excel file will contain the output with EXACTLY THE SAME layout as would have been for a pdf file (if the smartform output is converted to a pdf file) and the client can then edit the fields of the table in the excel file.  How can I achieve this? Please give a suggestion.. Thanks in advance.

    Hi Anirban,
    Your Requirement is to download a smartform to  microsoft  Excel .
    Well unfortunately we can only download data into excel which is in a tabular format i.e stored in internal tables we have function modules to do the same even u can do that using OLE2.
    If u try to download a smartform to Excel only format supported will be ASCII, if u will continue with that the smartforms text's will get downloaded to excel but whole data would be downloaded in a single Cell.
    Code to do the same is -
    >>>>
    CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
      EXPORTING
      i_language = v_language
      i_application = 'SAPDEFAULT'
      IMPORTING
      e_devtype = v_e_devtype.
       CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          FORMNAME                 = w_form
    *   VARIANT                  = ' '
    *   DIRECT_CALL              = ' '
       IMPORTING
         FM_NAME                  =  w_fmname
       EXCEPTIONS
         NO_FORM                  = 1
         NO_FUNCTION_MODULE       = 2
         OTHERS                   = 3
      IF sy-subrc <> 0.
        MESSAGE E002(zcpm) WITH 'Smartform call fails'.
      ENDIF.
    wa_outopt-tdprinter = v_e_devtype.
    wa_ctrlop-no_dialog = 'X'.
    wa_ctrlop-getotf    = 'X'.
      CALL FUNCTION w_fmname "'/1BCDWB/SF00000025'
        EXPORTING
    *   ARCHIVE_INDEX              =
    *   ARCHIVE_INDEX_TAB          =
    *   ARCHIVE_PARAMETERS         =
        CONTROL_PARAMETERS         = WA_CTRLOP
    *   MAIL_APPL_OBJ              =
    *   MAIL_RECIPIENT             =
    *   MAIL_SENDER                =
        OUTPUT_OPTIONS             = WA_OUTOPT
    *    USER_SETTINGS              = ' '
        IMPORTING
    *   DOCUMENT_OUTPUT_INFO       =
        JOB_OUTPUT_INFO            = T_OTFDATA
    *   JOB_OUTPUT_OPTIONS         =
    *    document_output_info       = st_document_output_info
    *    job_output_info            = st_job_output_info
    *    job_output_options         = st_job_output_options
        TABLES
          T_FINAL                    = T_FINAL
          T_ZSDT_WAGONS              = T_ZSDT_WAGONS_1
          T_QTY                      = T_QTY
          T_QTY1                     = T_QTY1
          T_CON1                     = T_CON1
          T_CON2                     = T_CON2
          "T_ZTMM_OUTWB_TXN           = T_ZTMM_OUTWB_TXN
    EXCEPTIONS
       FORMATTING_ERROR           = 1
       INTERNAL_ERROR             = 2
       SEND_ERROR                 = 3
       USER_CANCELED              = 4
       OTHERS                     = 5
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    T_OTF[] = T_OTFDATA-OTFDATA[].
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
              format = 'ASCII'
              max_linewidth = 132
    * ARCHIVE_INDEX = ' '
    IMPORTING
              bin_filesize = w_bin_filesize
    TABLES
              otf   = t_otf
              lines = t_pdf_tab
    EXCEPTIONS
              err_max_linewidth = 1
              err_format = 2
           err_conv_not_possible = 3
    OTHERS = 4
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    if tabix_m = 1.
    *CALL METHOD cl_gui_frontend_services=>file_save_dialog
    *CHANGING
    *filename = w_FILE_NAME
    *path     = w_FILE_PATH
    *fullpath = w_FULL_PATH
    ** USER_ACTION =
    ** FILE_ENCODING =
    *EXCEPTIONS
    *CNTL_ERROR = 1
    *ERROR_NO_GUI = 2
    *NOT_SUPPORTED_BY_GUI = 3
    *others = 4
    *IF sy-subrc <> 0.
    *MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *ENDIF.
    CALL function 'TMP_GUI_BROWSE_FOR_FOLDER'
    EXPORTING
    WINDOW_TITLE = 'Select A File Folder'
    INITIAL_FOLDER = 'C:\'
    IMPORTING
    SELECTED_FOLDER = W_PATH.
    endif.
    CONDENSE W_PATH.
    concatenate W_PATH '\' wa_final-vbeln '.XLS' into w_FULL_PATH.
    ****************************************************************************Saving the PDF file on to Application server************************
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
       BIN_FILESIZE                     = w_bin_filesize
       FILENAME                         = w_FULL_PATH
       FILETYPE                         = 'BIN'
    *   APPEND                          = ' '
    *   WRITE_FIELD_SEPARATOR           = ' '
    *   HEADER                          = '00'
    *   TRUNC_TRAILING_BLANKS           = ' '
    *   WRITE_LF                        = 'X'
    *   COL_SELECT                      = ' '
    *   COL_SELECT_MASK                 = ' '
    *   DAT_MODE                        = ' '
    *   CONFIRM_OVERWRITE               = ' '
    *   NO_AUTH_CHECK                   = ' '
    *   CODEPAGE                        = ' '
    *   IGNORE_CERR                     = ABAP_TRUE
    *   REPLACEMENT                     = '#'
    *   WRITE_BOM                       = ' '
    *   TRUNC_TRAILING_BLANKS_EOL       = 'X'
    *   WK1_N_FORMAT                    = ' '
    *   WK1_N_SIZE                      = ' '
    *   WK1_T_FORMAT                    = ' '
    *   WK1_T_SIZE                      = ' '
    IMPORTING
       FILELENGTH                      = w_filesize
      TABLES
        DATA_TAB                        = t_pdf_tab
    *   FIELDNAMES                      =
    EXCEPTIONS
       FILE_WRITE_ERROR                = 1
       NO_BATCH                        = 2
       GUI_REFUSE_FILETRANSFER         = 3
       INVALID_TYPE                    = 4
       NO_AUTHORITY                    = 5
       UNKNOWN_ERROR                   = 6
       HEADER_NOT_ALLOWED              = 7
       SEPARATOR_NOT_ALLOWED           = 8
       FILESIZE_NOT_ALLOWED            = 9
       HEADER_TOO_LONG                 = 10
       DP_ERROR_CREATE                 = 11
       DP_ERROR_SEND                   = 12
       DP_ERROR_WRITE                  = 13
       UNKNOWN_DP_ERROR                = 14
       ACCESS_DENIED                   = 15
       DP_OUT_OF_MEMORY                = 16
       DISK_FULL                       = 17
       DP_TIMEOUT                      = 18
       FILE_NOT_FOUND                  = 19
       DATAPROVIDER_EXCEPTION          = 20
       CONTROL_FLUSH_ERROR             = 21
       OTHERS                          = 22
    As u said ,u want to download a smartform to Excel it could be done but only if u r using a internal table and exactly printing line by line values in the smartform, But if u are performing calculation in between, using multiple internal table Work areas, structures, etc i.e if whole smartform is developed with many distributed windows , unfortunately it wont be possible to download a smartform to excel in such cases, because the whole output comes from multiple internal tables, calculations, etc all the data is not printed in a tabular manner so in such a case it would be just impossible to download the smartform  to excel.
    But we definitely have a workaround which could be done to download the data into excel.
    you can develop a ALV report with a header and footer u can define the header and footer of the alv according to the smartform and the middle portion would contain the tabular kind of data which u must be using as Smartform table to print the same.
    So if u have a similar kind of smartform with some header data, tabular data, and some footer data, then u can use ALV to do the same thing , advantage with ALV would be that u can easily download the same into excel.
    Other alternative is that u can Convert and download the smartform to PDF  and copy the same to an Excel wooksheet.
    These are all the possibilities with which u can do the same.
    Regards,
    Akash Rana

  • Smartforms output as HTML in email

    Hi,
    I want to send the output of a smartform as html in email body.
    I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
    I did everything as per the blog.
    However I am getting the email as:
    sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
    Welcome
    <IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
    I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
    <IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
    When I display the document using SOST, I get the output as
    Address bar has this:  C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
    and window contains:
    Welcome
    <IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
    Regards,
    Reema
    Message was edited by:
            Reema Shahbazkar
    In case anyone needs to have a look at my code:
    REPORT  ZSMARTFORM_2_HTML_EMAIL.
    get generated function module for the smartform
    DATA: FM_NAME TYPE RS38L_FNAM.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        FORMNAME                 = 'ZSF_SAMPLE_HTML'
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
    IMPORTING
       FM_NAME                  = FM_NAME
    EXCEPTIONS
       NO_FORM                  = 1
       NO_FUNCTION_MODULE       = 2
       OTHERS                   = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    get smartform contetnt
    set smartform output options
    data:
      control_parameters type SSFCTRLOP,
      OUTPUT_OPTIONS     TYPE SSFCOMPOP,
      DOCUMENT_OUTPUT_INFO  TYPE SSFCRESPD,
      JOB_OUTPUT_INFO  TYPE SSFCRESCL,
      JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
      XSFPARAM_LINE TYPE SSFXSFP,
      P_HTML TYPE TRFRESULT,
      P_GRAPHICS TYPE TSF_XSF_GR,
      WA_RETURN TYPE BAPIRET2.
    CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
    control_parameters-NO_DIALOG = 'X'.
    *control_parameters-GETOTF = 'X'.
    OUTPUT_OPTIONS-TDNEWID = SPACE.
    OUTPUT_OPTIONS-TDIMMED = SPACE.
    OUTPUT_OPTIONS-XSFCMODE = 'X'.  "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
    OUTPUT_OPTIONS-XSF = 'X'.  "XSF OUTPUT ACTIVATED
    OUTPUT_OPTIONS-XSFOUTMODE = 'A'.  "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
    CLEAR: OUTPUT_OPTIONS-XSFOUTDEV.  "OUTPUT SPOOL DEVICE
    OUTPUT_OPTIONS-XSFFORMAT = 'X'.  "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
    XSFPARAM_LINE-NAME = 'GRAPHICS'.
    XSFPARAM_LINE-VALUE = 'EXTRACT'.
    APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
    XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
    XSFPARAM_LINE-VALUE = C_GR_DIR.
    APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
    XSFPARAM_LINE-NAME = 'CONTENT-ID'.
    XSFPARAM_LINE-VALUE = 'ENABLE'.
    APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
    CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
    CALL FUNCTION FM_NAME
    EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
       CONTROL_PARAMETERS         = CONTROL_PARAMETERS
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
       OUTPUT_OPTIONS             = OUTPUT_OPTIONS
      USER_SETTINGS              = 'X'
    IMPORTING
       DOCUMENT_OUTPUT_INFO       = DOCUMENT_OUTPUT_INFO
       JOB_OUTPUT_INFO            = JOB_OUTPUT_INFO
       JOB_OUTPUT_OPTIONS         = JOB_OUTPUT_OPTIONS
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
    P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
    P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
    PROCEED TO SEND EMAIL
    DATA: HTML_DATA TYPE TRFRESULT,
          L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
          HTML_XSTR TYPE XSTRING.
    CLEAR: HTML_XSTR.
    LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
      CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
    ENDLOOP.
    HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
    SPECIAL CHARACTER CONVERSION
    DATA: HTML_STR TYPE STRING,
          HTML_LEN TYPE I.
    CALL FUNCTION 'SCP_TRANSLATE_CHARS'
      EXPORTING
        INBUFF                   = HTML_XSTR
      INBUFFLG                 = 0
       INCODE                   = '4110'  "utf-8
      OUTBUFFLG                = 0
      OUTCODE                  = '0000'
       CSUBST                   = 'X'
      SUBSTC_HASH              = ' '
      SUBSTC_DOT               = ' '
       SUBSTC_SPACE             = 'x'
      SUBSTC                   = '00035'
    IMPORTING
      INUSED                   =
       OUTBUFF                  = HTML_STR
      OUTOVERFLOW              =
       OUTUSED                  = HTML_LEN
      SUBSTED                  =
      INPUT_ENDS_IN_CHAR       =
      ERRMSG                   =
    EXCEPTIONS
      INVALID_CODEPAGE         = 1
      INTERNAL_ERROR           = 2
      CANNOT_CONVERT           = 3
      FIELDS_BAD_TYPE          = 4
      OTHERS                   = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CHANGE ENCODING UTF-8 TO LATIN1
    REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
    HTML_LEN = STRLEN( HTML_STR ).
    DATA: L_OFFSET TYPE I,
          L_LENGTH TYPE I,
          L_DIFF TYPE I,
          LT_SOLI TYPE SOLI_TAB,
          LS_SOLI TYPE SOLI.
    L_OFFSET = 0.
    L_LENGTH = 255.
    WHILE L_OFFSET < HTML_LEN.
      L_DIFF = HTML_LEN - L_OFFSET.
      IF L_DIFF > L_LENGTH.
        LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
      ELSE.
        LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
      ENDIF.
      APPEND LS_SOLI TO LT_SOLI.
      ADD L_LENGTH TO L_OFFSET.
    ENDWHILE.
    DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
    CREATE OBJECT LO_MIME_HELPER
      EXPORTING
        CODEPAGE = '1133'.
    CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
      EXPORTING
        CONTENT     = LT_SOLI
       FILENAME    =
       DESCRIPTION =
    HANDLE GRAPHICS
    DATA: L_GRAPHIC TYPE SSF_XSF_GR,
          GR_XSTR TYPE XSTRING,
          L_GR_RAW TYPE BAPICONTEN,
          L_CONTENT_ID TYPE STRING,
          L_CONTENT_TYPE TYPE W3CONTTYPE,
          L_OBJ_LEN TYPE SO_OBJ_LEN,
          L_FILENAME TYPE STRING,
          LT_SOLIX TYPE SOLIX_TAB,
          LS_SOLIX TYPE SOLIX.
    LOOP AT P_GRAPHICS INTO L_GRAPHIC.
      CLEAR: GR_XSTR.
      LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
        CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
      ENDLOOP.
      GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
      L_OFFSET = 0.
      L_LENGTH = 255.
      CLEAR LT_SOLIX[].
      WHILE L_OFFSET < L_GRAPHIC-LENGTH.
        L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
        IF L_DIFF > L_LENGTH.
          LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
        ELSE.
          LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
        ENDIF.
        APPEND LS_SOLIX TO LT_SOLIX.
        ADD L_LENGTH TO L_OFFSET.
      ENDWHILE.
      CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
      CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
      L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
      L_OBJ_LEN = L_GRAPHIC-LENGTH.
    ADD IMAGES TO EMAIL
      CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
        EXPORTING
          CONTENT      = LT_SOLIX
         FILENAME     =
         EXTENSION    =
         DESCRIPTION  =
          CONTENT_TYPE = L_CONTENT_TYPE
          LENGTH       = L_OBJ_LEN
          CONTENT_ID   = L_CONTENT_ID
    ENDLOOP.
    DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
          P_SUBJECT TYPE SO_OBJ_DES,
          LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
          LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
          LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
      P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
      TRY.
      CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
        EXPORTING
          I_SUBJECT          = P_SUBJECT
          I_LANGUAGE         = SY-LANGU
          I_IMPORTANCE       = '5'
          I_SENSITIVITY      = 'F'
          I_MULTIREL_SERVICE = LO_MIME_HELPER
        RECEIVING
          RESULT             = LO_DOC_BCS
       CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
       CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
       CATCH CX_GBT_MIME INTO LV_GBT_MIME.
      ENDTRY.
    RECEIVERS
    DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
          RECEIVER TYPE SOMLRECI1,
          L_MAIL_ADDRESS TYPE AD_SMTPADR,
          LO_BCS TYPE REF TO CL_BCS,
          LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
          L_USERNAME TYPE UNAME,
          SEND_PARTNER TYPE BU_PARTNER,
          LI_SENDER TYPE REF TO IF_SENDER_BCS,
          LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
          LV_SENT_TO_ALL TYPE BOOLEAN.
    CLEAR RECEIVER.
    RECEIVER-RECEIVER = '[email protected]'.
    RECEIVER-REC_TYPE = 'U'.
    RECEIVER-COM_TYPE = 'INT'.
    APPEND RECEIVER TO P_RECEIVERS.
    L_USERNAME = SY-UNAME.
    CLEAR RECEIVER.
    LOOP AT P_RECEIVERS INTO RECEIVER.
      L_MAIL_ADDRESS = RECEIVER-RECEIVER.
      TRY.
      CALL METHOD CL_BCS=>CREATE_PERSISTENT
        RECEIVING
          RESULT = LO_BCS
       CALL METHOD LO_BCS->SET_DOCUMENT
         EXPORTING
           I_DOCUMENT = LO_DOC_BCS
       CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
      ENDTRY.
    CREATE SENDER
    CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
    TRY.
      IF L_USERNAME NS '@'.
        L_USERNAME = SEND_PARTNER.
        TRANSLATE L_USERNAME TO UPPER CASE.
        LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
      ELSE.
        DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
        L_FROM_MAIL_ADDRESS = L_USERNAME.
        LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
      ENDIF.
      CALL METHOD LO_BCS->SET_SENDER
        EXPORTING
          I_SENDER = LI_SENDER
    CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
    CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
    ENDTRY.
    create recepient
    data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
    TRY.
    CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
       EXPORTING
         I_ADDRESS_STRING = L_MAIL_ADDRESS
        I_ADDRESS_NAME   =
        I_INCL_SAPUSER   =
       RECEIVING
         RESULT           = LO_RECEPIENT
      CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
    ENDTRY.
    TRY.
    CALL METHOD LO_BCS->ADD_RECIPIENT
       EXPORTING
         I_RECIPIENT  = LO_RECEPIENT
        I_EXPRESS    =
        I_COPY       =
        I_BLIND_COPY =
        I_NO_FORWARD =
      CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
    ENDTRY.
    SEND EMAIL DOCUMENT
    TRY.
    CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
      EXPORTING
        I_REQUESTED_STATUS = 'N'
    TRY.
    CALL METHOD LO_BCS->SEND
    EXPORTING
       I_WITH_ERROR_SCREEN = SPACE
      RECEIVING
        RESULT              = LV_SENT_TO_ALL
    CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
    ENDTRY.
    ENDTRY.
    ENDLOOP.
    COMMIT WORK.

    Hi,
    I want to send the output of a smartform as html in email body.
    I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
    I did everything as per the blog.
    However I am getting the email as:
    sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
    Welcome
    <IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
    I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
    <IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
    When I display the document using SOST, I get the output as
    Address bar has this:  C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
    and window contains:
    Welcome
    <IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
    Regards,
    Reema
    Message was edited by:
            Reema Shahbazkar
    In case anyone needs to have a look at my code:
    REPORT  ZSMARTFORM_2_HTML_EMAIL.
    get generated function module for the smartform
    DATA: FM_NAME TYPE RS38L_FNAM.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        FORMNAME                 = 'ZSF_SAMPLE_HTML'
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
    IMPORTING
       FM_NAME                  = FM_NAME
    EXCEPTIONS
       NO_FORM                  = 1
       NO_FUNCTION_MODULE       = 2
       OTHERS                   = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    get smartform contetnt
    set smartform output options
    data:
      control_parameters type SSFCTRLOP,
      OUTPUT_OPTIONS     TYPE SSFCOMPOP,
      DOCUMENT_OUTPUT_INFO  TYPE SSFCRESPD,
      JOB_OUTPUT_INFO  TYPE SSFCRESCL,
      JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
      XSFPARAM_LINE TYPE SSFXSFP,
      P_HTML TYPE TRFRESULT,
      P_GRAPHICS TYPE TSF_XSF_GR,
      WA_RETURN TYPE BAPIRET2.
    CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
    control_parameters-NO_DIALOG = 'X'.
    *control_parameters-GETOTF = 'X'.
    OUTPUT_OPTIONS-TDNEWID = SPACE.
    OUTPUT_OPTIONS-TDIMMED = SPACE.
    OUTPUT_OPTIONS-XSFCMODE = 'X'.  "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
    OUTPUT_OPTIONS-XSF = 'X'.  "XSF OUTPUT ACTIVATED
    OUTPUT_OPTIONS-XSFOUTMODE = 'A'.  "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
    CLEAR: OUTPUT_OPTIONS-XSFOUTDEV.  "OUTPUT SPOOL DEVICE
    OUTPUT_OPTIONS-XSFFORMAT = 'X'.  "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
    XSFPARAM_LINE-NAME = 'GRAPHICS'.
    XSFPARAM_LINE-VALUE = 'EXTRACT'.
    APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
    XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
    XSFPARAM_LINE-VALUE = C_GR_DIR.
    APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
    XSFPARAM_LINE-NAME = 'CONTENT-ID'.
    XSFPARAM_LINE-VALUE = 'ENABLE'.
    APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
    CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
    CALL FUNCTION FM_NAME
    EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
       CONTROL_PARAMETERS         = CONTROL_PARAMETERS
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
       OUTPUT_OPTIONS             = OUTPUT_OPTIONS
      USER_SETTINGS              = 'X'
    IMPORTING
       DOCUMENT_OUTPUT_INFO       = DOCUMENT_OUTPUT_INFO
       JOB_OUTPUT_INFO            = JOB_OUTPUT_INFO
       JOB_OUTPUT_OPTIONS         = JOB_OUTPUT_OPTIONS
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
    P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
    P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
    PROCEED TO SEND EMAIL
    DATA: HTML_DATA TYPE TRFRESULT,
          L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
          HTML_XSTR TYPE XSTRING.
    CLEAR: HTML_XSTR.
    LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
      CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
    ENDLOOP.
    HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
    SPECIAL CHARACTER CONVERSION
    DATA: HTML_STR TYPE STRING,
          HTML_LEN TYPE I.
    CALL FUNCTION 'SCP_TRANSLATE_CHARS'
      EXPORTING
        INBUFF                   = HTML_XSTR
      INBUFFLG                 = 0
       INCODE                   = '4110'  "utf-8
      OUTBUFFLG                = 0
      OUTCODE                  = '0000'
       CSUBST                   = 'X'
      SUBSTC_HASH              = ' '
      SUBSTC_DOT               = ' '
       SUBSTC_SPACE             = 'x'
      SUBSTC                   = '00035'
    IMPORTING
      INUSED                   =
       OUTBUFF                  = HTML_STR
      OUTOVERFLOW              =
       OUTUSED                  = HTML_LEN
      SUBSTED                  =
      INPUT_ENDS_IN_CHAR       =
      ERRMSG                   =
    EXCEPTIONS
      INVALID_CODEPAGE         = 1
      INTERNAL_ERROR           = 2
      CANNOT_CONVERT           = 3
      FIELDS_BAD_TYPE          = 4
      OTHERS                   = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CHANGE ENCODING UTF-8 TO LATIN1
    REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
    REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
    HTML_LEN = STRLEN( HTML_STR ).
    DATA: L_OFFSET TYPE I,
          L_LENGTH TYPE I,
          L_DIFF TYPE I,
          LT_SOLI TYPE SOLI_TAB,
          LS_SOLI TYPE SOLI.
    L_OFFSET = 0.
    L_LENGTH = 255.
    WHILE L_OFFSET < HTML_LEN.
      L_DIFF = HTML_LEN - L_OFFSET.
      IF L_DIFF > L_LENGTH.
        LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
      ELSE.
        LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
      ENDIF.
      APPEND LS_SOLI TO LT_SOLI.
      ADD L_LENGTH TO L_OFFSET.
    ENDWHILE.
    DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
    CREATE OBJECT LO_MIME_HELPER
      EXPORTING
        CODEPAGE = '1133'.
    CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
      EXPORTING
        CONTENT     = LT_SOLI
       FILENAME    =
       DESCRIPTION =
    HANDLE GRAPHICS
    DATA: L_GRAPHIC TYPE SSF_XSF_GR,
          GR_XSTR TYPE XSTRING,
          L_GR_RAW TYPE BAPICONTEN,
          L_CONTENT_ID TYPE STRING,
          L_CONTENT_TYPE TYPE W3CONTTYPE,
          L_OBJ_LEN TYPE SO_OBJ_LEN,
          L_FILENAME TYPE STRING,
          LT_SOLIX TYPE SOLIX_TAB,
          LS_SOLIX TYPE SOLIX.
    LOOP AT P_GRAPHICS INTO L_GRAPHIC.
      CLEAR: GR_XSTR.
      LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
        CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
      ENDLOOP.
      GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
      L_OFFSET = 0.
      L_LENGTH = 255.
      CLEAR LT_SOLIX[].
      WHILE L_OFFSET < L_GRAPHIC-LENGTH.
        L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
        IF L_DIFF > L_LENGTH.
          LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
        ELSE.
          LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
        ENDIF.
        APPEND LS_SOLIX TO LT_SOLIX.
        ADD L_LENGTH TO L_OFFSET.
      ENDWHILE.
      CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
      CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
      L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
      L_OBJ_LEN = L_GRAPHIC-LENGTH.
    ADD IMAGES TO EMAIL
      CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
        EXPORTING
          CONTENT      = LT_SOLIX
         FILENAME     =
         EXTENSION    =
         DESCRIPTION  =
          CONTENT_TYPE = L_CONTENT_TYPE
          LENGTH       = L_OBJ_LEN
          CONTENT_ID   = L_CONTENT_ID
    ENDLOOP.
    DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
          P_SUBJECT TYPE SO_OBJ_DES,
          LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
          LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
          LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
      P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
      TRY.
      CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
        EXPORTING
          I_SUBJECT          = P_SUBJECT
          I_LANGUAGE         = SY-LANGU
          I_IMPORTANCE       = '5'
          I_SENSITIVITY      = 'F'
          I_MULTIREL_SERVICE = LO_MIME_HELPER
        RECEIVING
          RESULT             = LO_DOC_BCS
       CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
       CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
       CATCH CX_GBT_MIME INTO LV_GBT_MIME.
      ENDTRY.
    RECEIVERS
    DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
          RECEIVER TYPE SOMLRECI1,
          L_MAIL_ADDRESS TYPE AD_SMTPADR,
          LO_BCS TYPE REF TO CL_BCS,
          LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
          L_USERNAME TYPE UNAME,
          SEND_PARTNER TYPE BU_PARTNER,
          LI_SENDER TYPE REF TO IF_SENDER_BCS,
          LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
          LV_SENT_TO_ALL TYPE BOOLEAN.
    CLEAR RECEIVER.
    RECEIVER-RECEIVER = '[email protected]'.
    RECEIVER-REC_TYPE = 'U'.
    RECEIVER-COM_TYPE = 'INT'.
    APPEND RECEIVER TO P_RECEIVERS.
    L_USERNAME = SY-UNAME.
    CLEAR RECEIVER.
    LOOP AT P_RECEIVERS INTO RECEIVER.
      L_MAIL_ADDRESS = RECEIVER-RECEIVER.
      TRY.
      CALL METHOD CL_BCS=>CREATE_PERSISTENT
        RECEIVING
          RESULT = LO_BCS
       CALL METHOD LO_BCS->SET_DOCUMENT
         EXPORTING
           I_DOCUMENT = LO_DOC_BCS
       CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
      ENDTRY.
    CREATE SENDER
    CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
    TRY.
      IF L_USERNAME NS '@'.
        L_USERNAME = SEND_PARTNER.
        TRANSLATE L_USERNAME TO UPPER CASE.
        LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
      ELSE.
        DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
        L_FROM_MAIL_ADDRESS = L_USERNAME.
        LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
      ENDIF.
      CALL METHOD LO_BCS->SET_SENDER
        EXPORTING
          I_SENDER = LI_SENDER
    CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
    CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
    ENDTRY.
    create recepient
    data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
    TRY.
    CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
       EXPORTING
         I_ADDRESS_STRING = L_MAIL_ADDRESS
        I_ADDRESS_NAME   =
        I_INCL_SAPUSER   =
       RECEIVING
         RESULT           = LO_RECEPIENT
      CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
    ENDTRY.
    TRY.
    CALL METHOD LO_BCS->ADD_RECIPIENT
       EXPORTING
         I_RECIPIENT  = LO_RECEPIENT
        I_EXPRESS    =
        I_COPY       =
        I_BLIND_COPY =
        I_NO_FORWARD =
      CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
    ENDTRY.
    SEND EMAIL DOCUMENT
    TRY.
    CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
      EXPORTING
        I_REQUESTED_STATUS = 'N'
    TRY.
    CALL METHOD LO_BCS->SEND
    EXPORTING
       I_WITH_ERROR_SCREEN = SPACE
      RECEIVING
        RESULT              = LV_SENT_TO_ALL
    CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
    ENDTRY.
    ENDTRY.
    ENDLOOP.
    COMMIT WORK.

  • How to print vertical lines in smartform?

    Hello friends,
    Is it possible to draw vertical (continuous) lines in the main-area in a smartform? The line should start from the header and end when it reaches the footer. the line should look like it divides the main window.

    hi,
    you may specify an x-position and a length in this way:
    code
    SELECTION-SCREEN ULINE /12(10).
    [/code]That means, "position at column 12 and draw an horizontal line of width 10 characters".
    I hope this helps. Best regards
    Reward points if found helpful...
    Cheers,
    Chandra Sekhar.

  • How to protect the lines in smartforms

    hi gurus
    i want to know how to protect the line in smartforms..
    regards
    baskar

    Check this link.
    http://www.saptechies.com/smartforms-protect-lines-in-main-window/
    if you are using tables, there are two options for protection against line break: – You can protect a line type against page break. – You can protect several table lines against page break for output in the main area.
    Protection against page break for line types – Double-click on your table node and choose the Table tab page. – Switch to the detail view by choosing the Details pushbutton. – Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on one page.
    Protection against page break for several table lines – Expand the main area of your table node in the navigation tree. – Insert a file node for the table lines to be protected in the main area. – If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file. – Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page Protection option set are output on one page
    Regards,
    Maha

  • Smartform Output to PDF conversion

    Hi experts,
    i want to convert the smartform output to PDF Format and stored it in system level.But i got the following information message "OTF end command // missing in OTF data".
    I used "CONVERT_OTF" for conversion of smartform output and "WS_DOWNLOAD & GUI_DOWNLOAD".
    wt it means,can i make any changes,if tl me why it shows the message.
    points wl be rewarded.
    Thank you
    chandu
    Edited by: Chandu Valluri on Jan 4, 2008 12:56 PM

    hi,
    *& Report  ZPDF_DNLD_TEST2                                             *
    *& DEVK904540                                                                    *
    REPORT  ZPDF_DNLD_TEST2                         .
    data: i_otf LIKE itcoo OCCURS 100 WITH HEADER LINE,
          i_pdf LIKE tline OCCURS 100 WITH HEADER LINE.
    data: op_option type SSFCTRLOP,
          job_output type SSFCRESCL.
    op_option-getotf = 'X'.
    CALL FUNCTION '/1BCDWB/SF00000005'
      EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
       CONTROL_PARAMETERS         = op_option
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
       itab1                      = itab1
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
       JOB_OUTPUT_INFO            = job_output
      JOB_OUTPUT_OPTIONS         =
    EXCEPTIONS
       FORMATTING_ERROR           = 1
       INTERNAL_ERROR             = 2
       SEND_ERROR                 = 3
       USER_CANCELED              = 4
       OTHERS                     = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
       FORMAT                      = 'PDF'
      MAX_LINEWIDTH               = 132
      ARCHIVE_INDEX               = ' '
      COPYNUMBER                  = 0
      ASCII_BIDI_VIS2LOG          = ' '
      PDF_DELETE_OTFTAB           = ' '
    IMPORTING
      BIN_FILESIZE                =
      BIN_FILE                    =
      TABLES
        otf                         = job_output-otfdata
        lines                       = i_pdf
    EXCEPTIONS
      ERR_MAX_LINEWIDTH           = 1
      ERR_FORMAT                  = 2
      ERR_CONV_NOT_POSSIBLE       = 3
      ERR_BAD_OTF                 = 4
      OTHERS                      = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
      BIN_FILESIZE                    =
        filename                        = 'c:\test_pdf_sf.pdf'
       FILETYPE                        = 'BIN'
      tables
        data_tab                        = i_pdf
      FIELDNAMES                      =
    EXCEPTIONS
       FILE_WRITE_ERROR                = 1
       NO_BATCH                        = 2
       GUI_REFUSE_FILETRANSFER         = 3
       INVALID_TYPE                    = 4
       NO_AUTHORITY                    = 5
       UNKNOWN_ERROR                   = 6
       HEADER_NOT_ALLOWED              = 7
       SEPARATOR_NOT_ALLOWED           = 8
       FILESIZE_NOT_ALLOWED            = 9
       HEADER_TOO_LONG                 = 10
       DP_ERROR_CREATE                 = 11
       DP_ERROR_SEND                   = 12
       DP_ERROR_WRITE                  = 13
       UNKNOWN_DP_ERROR                = 14
       ACCESS_DENIED                   = 15
       DP_OUT_OF_MEMORY                = 16
       DISK_FULL                       = 17
       DP_TIMEOUT                      = 18
       FILE_NOT_FOUND                  = 19
       DATAPROVIDER_EXCEPTION          = 20
       CONTROL_FLUSH_ERROR             = 21
       OTHERS                          = 22
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • Smartform output in html

    Dear all ,
    I want to take smartform output in html format . the logos are not coming as well as the header template the records are coming in next line not side by side .my code is :
        gs_output_options-xsfcmode  = 'X'.
        gs_output_options-xsf = 'X'.
        gs_output_options-xsfoutmode = 'A'.
        gs_output_options-xsfformat = 'X'.
        xsfparam_line-name  = 'GRAPHICS'.
        xsfparam_line-value = 'EXTRACT'.
        APPEND xsfparam_line TO gs_output_options-xsfpars.
        xsfparam_line-name  = 'GRAPHICS-DIRECTORY'.            
        xsfparam_line-value = c_gr_dir.
        APPEND xsfparam_line TO gs_output_options-xsfpars.
        xsfparam_line-name  = 'CONTENT-ID'.                  
        xsfparam_line-value = 'ENABLE'.                        
        APPEND xsfparam_line TO gs_output_options-xsfpars.
      CALL FUNCTION fm_name
       EXPORTING
         control_parameters = gs_ssfctrlop
         output_options     = gs_output_options
      p_graphics[] = gs_job_output_info-xmloutput-xsfgr[].
      p_html = gs_job_output_info-xmloutput-trfresult
        CONCATENATE 'C:\TEST\TC1_' p_vbeln '.html' INTO p_file.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            BIN_FILESIZE            = html_len
            filename                = p_file
            filetype                = 'BIN'"'ASC'
           trunc_trailing_blanks   = 'X'
          TABLES
            data_tab                = p_html-content
          CALL METHOD cl_gui_frontend_services=>execute
            EXPORTING
              document               = p_file

    This question (logos and html smartform output) has been discussed several times related to email sending.  Try searching the forum.  You may find some relevant info in other posts.  Have you tried reaching the url that's generated for the logo?

  • Smartform output to be send via Email

    Hi Guys,
    I have a custom report and output generated by Smartform, currently it is printing on printer.
    My requirement is to sent this output to customer via Email.(email and perferred communication details are available from customer master)
    We have a output management server which will receive this output and convert into PDF format and distribute this output to customer.
    I would like to know what are the possible changes require on driver program.
    Appriciate your help.
    Regards
    Pravin
    Edited by: Pravin on Apr 16, 2008 9:23 PM
    Edited by: Pravin on Apr 16, 2008 9:25 PM

    Hi Pravin,
    Check the following sample program. Smartform driver program. It helps you how to convert smartform output as PDF using function module CONVERT_OTF. Once it is converted mail can be sent through function module SO_NEW_DOCUMENT_ATT_SEND_API1.
    Wherever u find MAI that should be mail.
    REPORT  zvenkat_smartform_via_mai.
    *&  Structures and Infotype Internal tables.
    TABLES pernr.
    INFOTYPES:
      0000,
      0001,
      0002,
      0006,
      0022,
      0023.
    INCLUDE dbpnpmac.
    *&  Declaration part
    * Types
    TYPES:
       BEGIN OF t_emp_info,
         pernr TYPE pa0001-pernr,
         ename TYPE pa0001-ename,
         bukrs TYPE pa0001-bukrs,
         persk TYPE pa0001-persk,
         stell TYPE pa0001-stell,
         gblnd TYPE pa0002-gblnd,
       END OF t_emp_info,
       BEGIN OF t_mard,
         matnr TYPE mard-matnr,
         werks TYPE mard-werks,
         labst TYPE mard-labst,
         meins TYPE mara-meins,
       END OF t_mard.
    * Work areas
    DATA:
      w_emp_info TYPE t_emp_info.
    * Internal tables
    DATA:
      i_emp_info TYPE STANDARD TABLE OF t_emp_info,
      i_mard     TYPE STANDARD TABLE OF t_mard.
    "  Mai related declarations
    "Variables
    DATA :
         g_sent_to_all   TYPE sonv-flag,
         g_tab_lines     TYPE i.
    "Types
    TYPES:
         t_document_data  TYPE  sodocchgi1,
         t_packing_list   TYPE  sopcklsti1,
         t_attachment     TYPE  solisti1,
         t_body_msg       TYPE  solisti1,
         t_receivers      TYPE  somlreci1,
         t_pdf            TYPE  tline.
    "Workareas
    DATA :
         w_document_data  TYPE  t_document_data,
         w_packing_list   TYPE  t_packing_list,
         w_attachment     TYPE  t_attachment,
         w_body_msg       TYPE  t_body_msg,
         w_receivers      TYPE  t_receivers,
         w_pdf            TYPE  t_pdf.
    "Internal Tables
    DATA :
         i_document_data  TYPE STANDARD TABLE OF t_document_data,
         i_packing_list   TYPE STANDARD TABLE OF t_packing_list,
         i_attachment     TYPE STANDARD TABLE OF t_attachment,
         i_body_msg       TYPE STANDARD TABLE OF t_body_msg,
         i_receivers      TYPE STANDARD TABLE OF t_receivers,
         i_pdf            TYPE STANDARD TABLE OF t_pdf.
    PARAMETERS:
               p_mai_id(99) TYPE c.
    *& Start-of-selection.
    START-OF-SELECTION.
    GET pernr.
      PERFORM get_data.
      PERFORM show_smartform.
    *& End-of-selection.
    END-OF-SELECTION.
    *&      Form  get_data
    FORM get_data .
      rp-provide-from-last p0000 space pn-begda pn-endda.
      rp-provide-from-last p0001 space pn-begda pn-endda.
      rp-provide-from-last p0002 space pn-begda pn-endda.
      MOVE-CORRESPONDING: p0000 TO w_emp_info,
                          p0001 TO w_emp_info,
                          p0002 TO w_emp_info.
      SELECT matnr werks labst
      FROM mard
      INTO CORRESPONDING FIELDS OF TABLE i_mard.
    ENDFORM.                    " get_data
    *&      Form  show_smartform
    FORM show_smartform .
      DATA :
        l_sform_name TYPE tdsfname,
        l_fm_name    TYPE rs38l_fnam.
      DATA :
            l_sf_control TYPE ssfctrlop,
            l_sf_options TYPE ssfcompop.
      DATA: i_otf LIKE itcoo OCCURS 100 WITH HEADER LINE.
    *        i_pdf LIKE tline OCCURS 100 WITH HEADER LINE.
      DATA: op_option TYPE ssfctrlop,
            job_output TYPE ssfcrescl.
    *  op_option-getotf = 'X'.
      l_sform_name = 'ZVENKAT_SMARTFORM'.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = l_sform_name
        IMPORTING
          fm_name            = l_fm_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        CALL FUNCTION l_fm_name
          EXPORTING
            control_parameters = op_option
            output_options     = l_sf_options
            w_emp_info         = w_emp_info
    IMPORTING
    *   DOCUMENT_OUTPUT_INFO       =
       job_output_info            = job_output
          TABLES
            p0006              = p0006
            p0022              = p0022
            p0023              = p0023
            i_mard             = i_mard.
        IF sy-subrc <>  0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CALL FUNCTION 'CONVERT_OTF'
          EXPORTING
            format = 'PDF'
          TABLES
            otf    = job_output-otfdata
            lines  = i_pdf.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        PERFORM send_mai.
      ENDIF.
    ENDFORM.                    " show_smartform
    *&      Form  send_mai
    FORM send_mail .
      "Subject of the mai.
      w_document_data-obj_name  = 'MAI_TO_HEAD'.
      w_document_data-obj_descr = 'Regarding Mai Program by SAP ABAP'.
      "Body of the mai
      PERFORM build_body_of_mai
        USING:space,
              'Hi,',
              'I am fine. How are you? How are you doing ? ',
              'This program has been created to send simple mai',
              'with Subject,Body with Address of the sender. ',
              'Regards,',
              'Venkat.O,',
              'SAP HR Technical Consultant.'.
      "Write Packing List for Body
      DESCRIBE TABLE i_body_msg LINES g_tab_lines.
      w_packing_list-head_start = 1.
      w_packing_list-head_num   = 0.
      w_packing_list-body_start = 1.
      w_packing_list-body_num   = g_tab_lines.
      w_packing_list-doc_type   = 'RAW'.
      APPEND w_packing_list TO i_packing_list.
      CLEAR  w_packing_list.
      "Write Packing List for Attachment
      w_packing_list-transf_bin = 'X'.
      w_packing_list-head_start = 1.
      w_packing_list-head_num   = 1.
      w_packing_list-body_start = 1.
      DESCRIBE TABLE i_attachment LINES w_packing_list-body_num.
      w_packing_list-doc_type   = 'PDF'.
      w_packing_list-obj_descr  = 'PDF Attachment'.
      w_packing_list-obj_name   = 'PDF_ATTACHMENT'.
      w_packing_list-doc_size   = w_packing_list-body_num * 255.
      APPEND w_packing_list TO i_packing_list.
      CLEAR  w_packing_list.
      "Fill the document data and get size of attachment
      w_document_data-obj_langu  = sy-langu.
      READ TABLE i_attachment INTO w_attachment INDEX g_tab_lines.
      w_document_data-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN( w_attachment ).
      "Receivers List.
      w_receivers-rec_type   = 'U'.      "Internet address
      w_receivers-receiver   = p_mai_id. "here mai Id should be given
      w_receivers-com_type   = 'INT'.
      w_receivers-notif_del  = 'X'.
      w_receivers-notif_ndel = 'X'.
      APPEND w_receivers TO i_receivers .
      CLEAR:w_receivers.
      "Function module to send mai to Recipients
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data              = w_document_data
          put_in_outbox              = 'X'
          commit_work                = 'X'
        IMPORTING
          sent_to_all                = g_sent_to_all
        TABLES
          packing_list               = i_packing_list
          contents_bin               = i_attachment
          contents_txt               = i_body_msg
          receivers                  = i_receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
      IF sy-subrc = 0 .
        MESSAGE i303(me) WITH 'Mai has been Successfully Sent.'.
      ELSE.
        WAIT UP TO 2 SECONDS.
        "This program starts the SAPconnect send process.
        SUBMIT rsconn01 WITH mode = 'INT'
                        WITH output = 'X'
                        AND RETURN.
      ENDIF.
    ENDFORM.                    " send_mai
    *&      Form  build_body_of_mai
    *       text
    *      -->L_MESSAGE  text
    FORM build_body_of_mai  USING l_message.
      w_body_msg = l_message.
      APPEND w_body_msg TO i_body_msg.
      CLEAR  w_body_msg.
    ENDFORM.                    " build_body_of_mai
    I hope that it helps u .
    Regards,
    Venkat.O

  • Converting smartforms output into PDF

    Hi ALL,
      How to convert the smartforms output into PDF based form. After executing the form, it should directly  open in PDF. How to do this?
    Points will be awarded.
    Thanks and regards,
    vinoth.

    Hi Vinoth Kumar,
    Please go throuh the below procedure and sample Code, this might help you.
    Procedure
    When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
    “Environment => Function Module_Name” . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is “ /1BCDWB/SF00000152 ”. In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be ‘X’. Setting this field will activate the OTF field in smartform.
    In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
    In every Smartform output in OTF format, TDPRINTCOM begins and ends with ‘//’. ‘EP’ represents the end-of-page value for TDPRINTCOM field.
    In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
    Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method “cl_gui_fronted_services=>file_save_dialog” to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
    Here is a sample code of program to perform the function.
    SAMPLE CODE
    *& Report  ZAMIT_SMART_FORM_PDF                                        *
    REPORT  ZAMIT_SMART_FORM_PDF                    .
    data: carr_id type sbook-carrid,
          cparam type ssfctrlop,
          outop type ssfcompop,
          fm_name type rs38l_fnam.
    DATA: tab_otf_data TYPE ssfcrescl,
          pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
          tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
          file_size TYPE i,
          bin_filesize TYPE i,
          FILE_NAME type string,
          File_path type string,
          FULL_PATH type string.
    parameter:      p_custid type scustom-id default 1.
    select-options: s_carrid for carr_id     default 'LH' to 'LH'.
    parameter:      p_form   type tdsfname   default 'ZAMIT_SMART_FORM'.
    data: customer    type scustom,
          bookings    type ty_bookings,
          connections type ty_connections.
    start-of-selection.
    suppressing the dialog box for print preview****************************
    outop-tddest = 'LP01'.
    cparam-no_dialog = 'X'.
    cparam-preview = SPACE.
    cparam-getotf = 'X'.
      select single * from scustom into customer where id = p_custid.
      check sy-subrc = 0.
      select * from sbook   into table bookings
               where customid = p_custid
               and   carrid in s_carrid
               order by primary key.
      select * from spfli into table connections
               for all entries in bookings
               where carrid = bookings-carrid
               and   connid = bookings-connid
               order by primary key.
      call function 'SSF_FUNCTION_MODULE_NAME'
           exporting  formname           = p_form
                    variant            = ' '
                    direct_call        = ' '
           importing  fm_name            = fm_name
           exceptions no_form            = 1
                      no_function_module = 2
                      others             = 3.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        exit.
      endif.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards
    calling the generated function module
      call function fm_name
           exporting
                    archive_index        =
                    archive_parameters   =
                     control_parameters   = cparam
                    mail_appl_obj        =
                    mail_recipient       =
                    mail_sender          =
                     output_options       =  outop
                     user_settings        = SPACE
                     bookings             = bookings
                      customer             = customer
                      connections          = connections
          importing
                    document_output_info =
                     job_output_info      = tab_otf_data
                    job_output_options   =
           exceptions formatting_error     = 1
                      internal_error       = 2
                      send_error           = 3
                      user_canceled        = 4
                      others               = 5.
      if sy-subrc <> 0.
      error handling
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
      tab_otf_final[] = tab_otf_data-otfdata[].
      CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
       format                      = 'PDF'
       max_linewidth               = 132
      ARCHIVE_INDEX               = ' '
      COPYNUMBER                  = 0
      ASCII_BIDI_VIS2LOG          = ' '
    IMPORTING
       bin_filesize                = bin_filesize
      BIN_FILE                    =
      TABLES
        otf                         = tab_otf_final
        lines                       = pdf_tab
    EXCEPTIONS
       err_max_linewidth           = 1
       err_format                  = 2
       err_conv_not_possible       = 3
       err_bad_otf                 = 4
       OTHERS                      = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
       WINDOW_TITLE         =
       DEFAULT_EXTENSION    =
       DEFAULT_FILE_NAME    =
       FILE_FILTER          =
       INITIAL_DIRECTORY    =
       WITH_ENCODING        =
       PROMPT_ON_OVERWRITE  = 'X'
      CHANGING
        filename             = FILE_NAME
        path                 = FILE_PATH
        fullpath             = FULL_PATH
       USER_ACTION          =
       FILE_ENCODING        =
    EXCEPTIONS
       CNTL_ERROR           = 1
       ERROR_NO_GUI         = 2
       NOT_SUPPORTED_BY_GUI = 3
       others               = 4
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ************downloading the converted PDF data to your local PC*******
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
       bin_filesize                    = bin_filesize
       filename                        = FULL_PATH
       filetype                        = 'BIN'
      APPEND                          = ' '
      WRITE_FIELD_SEPARATOR           = ' '
      HEADER                          = '00'
      TRUNC_TRAILING_BLANKS           = ' '
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
    IMPORTING
       filelength                      = file_size
      TABLES
        data_tab                        = pdf_tab
      FIELDNAMES                      =
    EXCEPTIONS
       file_write_error                = 1
       no_batch                        = 2
       gui_refuse_filetransfer         = 3
       invalid_type                    = 4
       no_authority                    = 5
       unknown_error                   = 6
       header_not_allowed              = 7
       separator_not_allowed           = 8
       filesize_not_allowed            = 9
       header_too_long                 = 10
       dp_error_create                 = 11
       dp_error_send                   = 12
       dp_error_write                  = 13
       unknown_dp_error                = 14
       access_denied                   = 15
       dp_out_of_memory                = 16
       disk_full                       = 17
       dp_timeout                      = 18
       file_not_found                  = 19
       dataprovider_exception          = 20
       control_flush_error             = 21
       OTHERS                          = 22
    IF sy-subrc <> 0.
    ENDIF.

  • I have a problem in converting smartform output to pdf format.

    Hi,
    While converting the smartform output to pdf format.
    It is showing this error.
    otf end command // missing in otf data.
    I have used this function.
    Assigning the OTFDATA to OTF Structure table
        CLEAR gt_otf.
        gt_otf[] = gs_otfdata-otfdata[].
    Convert the OTF DATA to SAP Script Text lines
        CLEAR gt_pdf_tab.
        CALL FUNCTION 'CONVERT_OTF'
          EXPORTING
            format                = 'PDF'
            max_linewidth         = 132
          IMPORTING
            bin_filesize          = gv_bin_filesize
          TABLES
            otf                   = gt_otf
            lines                 = gt_pdf_tab
          EXCEPTIONS
            err_max_linewidth     = 1
            err_format            = 2
            err_conv_not_possible = 3
            OTHERS                = 4.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Please help me in this regard. Thanks in advance.

    Hi ,
    I am getting this exception "err_conv_not_possible"
    CALL FUNCTION f_name " '/1BCDWB/SF00000092'
          EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
            CONTROL_PARAMETERS       = st_control_parameters
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
         OUTPUT_OPTIONS             = st_output_options
      USER_SETTINGS              = 'X'
            ZST_TEXTSYMBOLS            = ZST_TEXTSYMBOLS
            wa_kna1                    = wa_kna1
            wa_claim_header            = wa_claim_header
       IMPORTING
         DOCUMENT_OUTPUT_INFO       = st_document_output_info
         JOB_OUTPUT_INFO            = st_job_output_info
         JOB_OUTPUT_OPTIONS         = st_job_output_options
          TABLES
            IT_CLAIM_VERSION           = IT_CLAIM_VERSION
            IT_CLAIM_ITEM              = IT_CLAIM_ITEM
            IT_CLAIM_PARTNER           = IT_CLAIM_PARTNER
            IT_FINAL                   = IT_FINAL
       EXCEPTIONS
         FORMATTING_ERROR           = 1
         INTERNAL_ERROR             = 2
         SEND_ERROR                 = 3
         USER_CANCELED              = 4
         OTHERS                     = 5
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ELSE.
    CALL FUNCTION 'CONVERT_OTF_2_PDF'
          EXPORTING
             USE_OTF_MC_CMD               = 'X'
        ARCHIVE_INDEX                =
          IMPORTING
          BIN_FILESIZE   = v_bin_filesize
          TABLES
          OTF = st_job_output_info-OTFDATA[]
          DOCTAB_ARCHIVE = it_docs
          LINES  = it_lines
          EXCEPTIONS
          ERR_CONV_NOT_POSSIBLE = 1
          ERR_OTF_MC_NOENDMARKER = 2
          OTHERS = 3.
          IF sy-subrc <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
        ENDIF.
    HERE when i tried to debug it i got SY-SUBRC = 1.
    Please help me in this regard. Thanks in advance.

  • Smartform Output To PDF And Send It As External Mail

    Dear All,
    I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file,it is giving error that FILE IS DAMAGED
    So please suggest a solution.
    Regards,
    Bhavesh

    REPORT ZTEST_PDF_MAIL.
    Internal Table declarations
    PARAMETERS : p_ebeln TYPE ekko-ebeln DEFAULT '4500000003'.
    DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
    I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
    I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
    I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
    Objects to send mail.
    I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
    I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
    I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
    I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
    Work Area declarations
    WA_OBJHEAD TYPE SOLI_TAB,
    W_CTRLOP TYPE SSFCTRLOP,
    W_COMPOP TYPE SSFCOMPOP,
    W_RETURN TYPE SSFCRESCL,
    WA_DOC_CHNG TYPE SODOCCHGI1,
    W_DATA TYPE SODOCCHGI1,
    WA_BUFFER TYPE STRING, "To convert from 132 to 255
    Variables declarations
    V_FORM_NAME TYPE RS38L_FNAM,
    V_LEN_IN LIKE SOOD-OBJLEN,
    V_LEN_OUT LIKE SOOD-OBJLEN,
    V_LEN_OUTN TYPE I,
    V_LINES_TXT TYPE I,
    V_LINES_BIN TYPE I.
    DATA:it_pdfdata   TYPE TABLE OF tline.
    DATA:it_pdf       TYPE TABLE OF solisti1.
    BREAK-POINT .
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        FORMNAME           = 'ZCSF_MM_PO_ORIGINAL'
      IMPORTING
        FM_NAME            = V_FORM_NAME
      EXCEPTIONS
        NO_FORM            = 1
        NO_FUNCTION_MODULE = 2
        OTHERS             = 3.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    W_CTRLOP-GETOTF = 'X'.
    W_CTRLOP-NO_DIALOG = 'X'.
    W_COMPOP-TDNOPREV = 'X'.
    CALL FUNCTION V_FORM_NAME
      EXPORTING
        CONTROL_PARAMETERS = W_CTRLOP
        OUTPUT_OPTIONS     = W_COMPOP
        USER_SETTINGS      = 'X'
        P_EBELN            =  P_EBELN
      IMPORTING
        JOB_OUTPUT_INFO    = W_RETURN
      EXCEPTIONS
        FORMATTING_ERROR   = 1
        INTERNAL_ERROR     = 2
        SEND_ERROR         = 3
        USER_CANCELED      = 4
        OTHERS             = 5.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    I_OTF[] = W_RETURN-OTFDATA[].
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        FORMAT                = 'PDF'
        MAX_LINEWIDTH         = 132
      IMPORTING
        BIN_FILESIZE          = V_LEN_IN
      TABLES
        OTF                   = I_OTF
        LINES                 = I_TLINE
      EXCEPTIONS
        ERR_MAX_LINEWIDTH     = 1
        ERR_FORMAT            = 2
        ERR_CONV_NOT_POSSIBLE = 3
        OTHERS                = 4.
    IF SY-SUBRC <> 0.
    ENDIF.
    LOOP AT I_TLINE.
      TRANSLATE I_TLINE USING '~'.
      CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
    ENDLOOP.
    TRANSLATE WA_BUFFER USING '~'.
    DO.
      I_RECORD = WA_BUFFER.
      APPEND I_RECORD.
      SHIFT WA_BUFFER LEFT BY 255 PLACES.
      IF WA_BUFFER IS INITIAL.
        EXIT.
      ENDIF.
    ENDDO.
    Attachment
    REFRESH: I_RECLIST,
    I_OBJTXT,
    I_OBJBIN,
    I_OBJPACK.
    CLEAR WA_OBJHEAD.
    I_OBJBIN[] = I_RECORD[].
    Create Message Body Title and Description
    I_OBJTXT = 'test with pdf-Attachment!'.
    APPEND I_OBJTXT.
    DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
    READ TABLE I_OBJTXT INDEX V_LINES_TXT.
    WA_DOC_CHNG-OBJ_NAME = 'smartform'.
    WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
    WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
    WA_DOC_CHNG-SENSITIVTY = 'F'.
    WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
    Main Text
    CLEAR I_OBJPACK-TRANSF_BIN.
    I_OBJPACK-HEAD_START = 1.
    I_OBJPACK-HEAD_NUM = 0.
    I_OBJPACK-BODY_START = 1.
    I_OBJPACK-BODY_NUM = V_LINES_TXT.
    I_OBJPACK-DOC_TYPE = 'RAW'.
    APPEND I_OBJPACK.
    Attachment (pdf-Attachment)
    I_OBJPACK-TRANSF_BIN = 'X'.
    I_OBJPACK-HEAD_START = 1.
    I_OBJPACK-HEAD_NUM = 0.
    I_OBJPACK-BODY_START = 1.
    DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
    READ TABLE I_OBJBIN INDEX V_LINES_BIN.
    I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
    I_OBJPACK-BODY_NUM = V_LINES_BIN.
    I_OBJPACK-DOC_TYPE = 'PDF'.
    I_OBJPACK-OBJ_NAME = 'smart'.
    I_OBJPACK-OBJ_DESCR = 'test'.
    APPEND I_OBJPACK.
    CLEAR I_RECLIST.
    I_RECLIST-RECEIVER = 'XYZ'.
    I_RECLIST-REC_TYPE = 'U'.
    APPEND I_RECLIST.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        DOCUMENT_DATA              = WA_DOC_CHNG
        PUT_IN_OUTBOX              = 'X'
        COMMIT_WORK                = 'X'
      TABLES
        PACKING_LIST               = I_OBJPACK
        OBJECT_HEADER              = WA_OBJHEAD
        CONTENTS_BIN               = I_OBJBIN
        CONTENTS_TXT               = I_OBJTXT
        RECEIVERS                  = I_RECLIST
      EXCEPTIONS
        TOO_MANY_RECEIVERS         = 1
        DOCUMENT_NOT_SENT          = 2
        DOCUMENT_TYPE_NOT_EXIST    = 3
        OPERATION_NO_AUTHORIZATION = 4
        PARAMETER_ERROR            = 5
        X_ERROR                    = 6
        ENQUEUE_ERROR              = 7
        OTHERS                     = 8.
    IF SY-SUBRC <> 0.
      WRITE:/ 'Error When Sending the File', SY-SUBRC.
    ELSE.
      WRITE:/ 'Mail sent'.
    ENDIF.

  • Problem in displaying data in the smartform output.

    Dear Freinds,
                    I have a requirement as per my requirement i have to display the employee dependents details in the smartform output.
    I have taken a table in smartform and collected all teh employee dependents details . Each dependents his own  details around 8 fields. so iam displaying in the smartform it is working till now no problem ........iam getting data as below
    Dependentrelation | dependentname|passportno|expirydate|visano|visadate|visa expire date| ResidenceNo|Residence issuedate|
    spouse                 | Raja                   |123456       |10/09/2009|122233|10/01/2009|10/01/2010 | 1001             |10/01/2009
    These are the one of the dependentds details iam having till now , like this i have another dependts details. Now the problem i have
    to add some fields to this list ( to this internal table) ...........if iam adding one more feild data is getting truncated as i dont have any more fields to add to right in the horizontal line........how can i solve this issue and how can i add further fields to this list
    like date of birth of the dependents and gender
    please could any one tell how i can solve this issue.
    regards
    divya.

    If this is a Tablethen only thing you can do is re-size the grid and font size to adjust your data. Like, displaying HEADINGS & DATAs in 2 rows instead of 1, etc.
    Nothing else can be done. Otherwise you have to trim down the data to adjust in one page.

  • Problem in sending the Smartform Output as PDF through Mail

    Dear All,
    I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file, it is giving error that FILE IS DAMAGED. Below is the code:
    REPORT  Y_SEND_MAIL2.
    TABLES: vbrk, vbrp.
    TYPE-POOLS: abap.
    DATA: it_vbrk TYPE TABLE OF vbrk WITH HEADER LINE.
    DATA: i_formname      TYPE       tdsfname,
          i_fm_name       TYPE       rs38l_fnam,
          it_vbak TYPE TABLE OF vbak WITH HEADER LINE,
          it_ekko TYPE TABLE OF ekko WITH HEADER LINE.
    DATA:  is_bil_invoice TYPE lbbil_invoice,
           output_options      TYPE ssfcompop,
           control_parameters  TYPE ssfctrlop,
           e_devtype           TYPE rspoptype,
           job_output_info     TYPE ssfcrescl,
           bin_file            TYPE xstring,
           lines               TYPE TABLE OF tline WITH HEADER LINE,
           doctab_archive      TYPE TABLE OF docs WITH HEADER LINE,
           filelength          TYPE i,
           bin_filesize        TYPE i,
           docs          TYPE TABLE OF docs WITH HEADER LINE.
    *"Types
    TYPES: t_document_data TYPE sodocchgi1,
           t_packing_list TYPE sopcklsti1,
           t_attachment TYPE solisti1,
           t_body_msg TYPE solisti1,
           t_receivers TYPE somlreci1,
           t_pdf TYPE tline.
    *"Workareas
    DATA :w_document_data TYPE t_document_data,
          w_packing_list TYPE t_packing_list,
          w_attachment TYPE t_attachment,
          w_body_msg TYPE t_body_msg,
          w_receivers TYPE t_receivers,
          w_pdf TYPE t_pdf.
    *internal tables
    DATA : i_document_data TYPE STANDARD TABLE OF t_document_data,
           i_packing_list TYPE STANDARD TABLE OF t_packing_list,
           i_attachment TYPE STANDARD TABLE OF t_attachment,
           i_body_msg TYPE STANDARD TABLE OF t_body_msg,
           i_receivers TYPE STANDARD TABLE OF t_receivers,
           i_pdf TYPE STANDARD TABLE OF t_pdf.
    DATA: BEGIN OF line_bin,
             data(1024) TYPE x,
          END OF line_bin.
    DATA: data_tab_bin LIKE STANDARD TABLE OF line_bin.
    So please suggest a solution.
    Regards,
    Vishal

    Continued:
    SELECT-OPTIONS: s_vbeln FOR vbrk-vbeln,
                    s_fkdat FOR vbrk-fkdat OBLIGATORY DEFAULT sy-datum.
    SELECT * FROM vbrk
    INTO TABLE it_vbrk
    WHERE fkdat IN s_fkdat
          AND vbeln IN s_vbeln.
    i_formname = 'Z_SD_JINDAL_INVOICE10'.
    output_options-tddest        = 'LP02'.
    output_options-tdimmed       = 'X'.
    output_options-tdnewid       = 'X'.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = i_formname
      IMPORTING
        fm_name            = i_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    IF sy-subrc <> 0.          "checking subrc
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.                     "IF sy-subrc <> 0
    READ TABLE it_vbrk INDEX 1.
    IF sy-subrc = 0.
      is_bil_invoice-hd_gen-bil_number = it_vbrk-vbeln.
    ENDIF.
    control_parameters-no_dialog = 'X'.
    control_parameters-getotf = 'X'.
    CALL FUNCTION i_fm_name        "'/1BCDWB/SF00000097'
      EXPORTING
       control_parameters         = control_parameters
       output_options             = output_options
       user_settings              = space
       is_bil_invoice             = is_bil_invoice
    IMPORTING
       job_output_info            = job_output_info
    TABLES
       it_vbak                    = it_vbak
    EXCEPTIONS
       formatting_error           = 1
       internal_error             = 2
       send_error                 = 3
       user_canceled              = 4
       OTHERS                     = 5.
    IF sy-subrc <> 0.
    *      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *FORM convert_otf_2_pdf.
      CALL FUNCTION 'CONVERT_OTF_2_PDF'
    *      EXPORTING
    *        USE_OTF_MC_CMD               = 'X'
    *        ARCHIVE_INDEX                =
        IMPORTING
          bin_filesize                 = bin_filesize
        TABLES
          otf                          = job_output_info-otfdata[]
          doctab_archive               = docs[]
          lines                        = lines[]
        EXCEPTIONS
          err_conv_not_possible        = 1
          err_otf_mc_noendmarker       = 2
          OTHERS                       = 3.
      IF sy-subrc <> 0.
    *      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *ENDFORM.                    "convert_otf_2_pdf

  • How to display non-continuous lines in a 2D Line flash chart ?

    Hi
    I am making 2D lines charts. is there a way ig tehre are no data in the table, to not to display points ?
    For example I have a table with this data :
    Date     Value
    01/01/09 2
    02/01/09 7
    03/01/09 4
    05/01/09 3
    06/01/09 2You see in the example anove that there is no data for the day 04/01/09.
    I would like the chart no to display any point for that day and start again for date following. This means displaying a non-continuous line.
    I hope I am clear.
    I tried but had no solutions. Would you have any idea on this ?
    Thank you for your kind help !
    Christian

    Hi Christian
    You're missing a lot of the XML build up from the website.
    You also need to return the string "Missing" for each date that you haven't got.
    Try this to get you started (you'll certainly need to fiddle with it to get it working)...
    DECLARE
       l_xml   VARCHAR2 (32767);
       start_date DATE;
       end_date DATE;
       the_date DATE;
       count_holder VARCHAR2(10);
    BEGIN
       l_xml :=        '<anychart> ';
       l_xml := l_xml||'<settings> ';
       l_xml := l_xml||'<animation enabled="True"/> ';
       l_xml := l_xml||'</settings> ';
       l_xml := l_xml||'<charts> ';
       l_xml := l_xml||'<chart plot_type="Scatter"> ';
       l_xml := l_xml||'<chart_settings> ';
       l_xml := l_xml||'<chart_background> ';
       l_xml := l_xml||'<border color="#990099"/> ';
       l_xml := l_xml||'</chart_background> ';
       l_xml := l_xml||'<title enabled="true"> ';
       l_xml := l_xml||'<text> Something </text> ';
       l_xml := l_xml||'</title> ';
       l_xml := l_xml||'<axes> ';
       l_xml := l_xml||'<x_axis tickmarks_placement="Center"> ';
       l_xml := l_xml||'<title enabled="true"> ';
       l_xml := l_xml||'<text>Date</text> ';
       l_xml := l_xml||'</title> ';
       l_xml := l_xml||'</x_axis> ';
       l_xml := l_xml||'<y_axis> ';
       l_xml := l_xml||'<scale minimum="1" type="Linear"/> ';
       l_xml := l_xml||'<title enabled="true"> ';
       l_xml := l_xml||'<text>Count</text> ';
       l_xml := l_xml||'</title> ';
       l_xml := l_xml||'</y_axis> ';
       l_xml := l_xml||'</axes> ';
       l_xml := l_xml||'</chart_settings> ';
       l_xml := l_xml||'<data_plot_settings default_series_type="Line"> ';
       l_xml := l_xml||'<line_series point_padding="0.2" group_padding="1"> ';
       l_xml := l_xml||'<label_settings enabled="true"> ';
       l_xml := l_xml||'<background enabled="false"/> ';
       l_xml := l_xml||'<font color="Rgb(45,45,45)" bold="true" size="9"> ';
       l_xml := l_xml||'<effects enabled="true"> ';
       l_xml := l_xml||'<glow enabled="true" color="White" opacity="1" blur_x="1.5" blur_y="1.5" strength="3"/> ';
       l_xml := l_xml||'</effects> ';
       l_xml := l_xml||'</font> ';
       l_xml := l_xml||'<format>{%YValue}{numDecimals:0}</format> ';
       l_xml := l_xml||'</label_settings> ';
       l_xml := l_xml||'<tooltip_settings enabled="true"> ';
       l_xml := l_xml||'<format> ';
       l_xml := l_xml||'Something: {%YValue}{numDecimals:0} ';
       l_xml := l_xml||'Date: {%Name} ';
       l_xml := l_xml||'</format> ';
       l_xml := l_xml||'<background> ';
       l_xml := l_xml||'<border type="Solid" color="DarkColor(%Color)"/> ';
       l_xml := l_xml||'</background> ';
       l_xml := l_xml||'<font color="DarkColor(%Color)"/> ';
       l_xml := l_xml||'</tooltip_settings> ';
       l_xml := l_xml||'<marker_settings enabled="true"/> ';
       l_xml := l_xml||'<line_style> ';
       l_xml := l_xml||'<line thickness="3"/> ';
       l_xml := l_xml||'</line_style> ';
       l_xml := l_xml||'</line_series> ';
       l_xml := l_xml||'</data_plot_settings> ';     
       l_xml := l_xml||'<data> '; 
       l_xml := l_xml||'<series name="Count"> ';     
       start_date := TO_DATE('01/01/2009');
       end_date   := TO_DATE('10/01/2009');
       the_date   := start_date;
       WHILE the_date <= end_date
       LOOP
        SELECT DECODE(COUNT(*),0,'Missing',COUNT(*))
        INTO the_count
        FROM evv_stpl
        WHERE date1 = the_date;
        l_xml := l_xml || '<point name = "'|| the_date ||'" y="'|| the_count ||'"/>';
        the_date := the_date + INTERVAL '1' DAY;
       END LOOP;
       l_xml := l_xml ||'</series> ';
       l_xml := l_xml ||'</data> ';
       l_xml := l_xml ||'</chart> ';
       l_xml := l_xml ||'</charts> ';
       l_xml := l_xml ||'</anychart>';
       HTP.p
    <html>
    <head>
    <title>AnyChart Sample</title>
    <script type="text/javascript" language="javascript" src="D:\oracle\product\10.2.0\apache\Apache\Apache\images\flashchart\AnyChart.js"></script>
    <body>
    <div id="chartDiv-1"></div>
        <script type="text/javascript" language="javascript">
        //<![CDATA[
        AnyChart.swfFile = ''D:\oracle\product\10.2.0\apache\Apache\Apache\images\flashchart\AnyChart.js'';
        var chart = new AnyChart();
        chart.width = "800";
        chart.height = "600";
        var data = '''
           || l_xml
           || ''';
        chart.setData(data);
        chart.write("chartDiv-1");
        //]]>
        </script>
    </body>
    </html>
    END;Hopefully you understand what I'm trying to do here, unfortunately I can't try it out myself at the moment.
    Maybe if you get stuck you could post it on apex.oracle.com?
    Cheers
    Ben
    Oops, handled a count of zero incorrectly - amended
    Edited by: Munky on May 7, 2009 1:17 PM

Maybe you are looking for

  • Utl_file how to start reading from a certain position?

    Hi all, i'm currently using utl_file to read a text file and import to db. i have managed to do it. however i would like to avoid reading the first line as it is the header. i would also like to avoid the last line as it is the footer. how do i use t

  • BB USAGE MONITOR -any progress?

    Hi everyone, I see that lots of customers are having trouble with BT saying they are going over their usage allowance when they don't think they are. I'm having similar problems and have been investigating it since BT started charging us £15 extra fo

  • How to cancel pending activities in ucsm

    how do I cancel a pending task in ucsm thats is waiting for me to ack. I just want to cancel the task. 

  • Filter inbound idoc

    Release 4.7 We would like to remove inbound idocs before they post to the system based on the idoc message type (eg: ORDERS). Is this possible via configuration or write program to accomplish this? This feature required in R/3 not in EDI sub-system.

  • Ora-01790 Expression must have same datatype as correspoding expression

    Can somebody help me how to fix this. award_number is varchar2(30) The problem is with award_name. Throwing an error. Not sure why it is giving problem. ora-01790 Expression must have same datatype as correspoding expression SELECT *  from award_test