Time Machine can't access sparsebundle Error 13 after Upgrade

Hey Community!
I just downloaded and upgraded to Mountain Lion - everything went well!
But when I tried to to a Time Machine Backup it says - can't access sparsebundle, Error 13.
Using a MyBook Live 2TB NAS on my Gigabit Router - it worked so far with Snow Leopard pretty well!!
What can I do?
What's wrong?
Thanks in advance!
Best regards from Austria,
David

I was having the same problem with a WD My Book Live External hard drive. I google searched it for a few hours and finally found someone who had the answer posted. I laughed at how simple it was! That time my problem was a error-1 I guess. However I ended up doing a factory restore of the external hard drive for specific reason other than that. That was a few days ago and I had forgotten about that error message and how I fixed it, so now I've been google searching again for days trying to find that post. I tried what someone one else posted about creating new disk image but that only gave me error-13, the same as you have. So! more hours of google searching trying to find the post again. However! I fixed it by accident and now the drive is backing up. Then I remembered that's exactly what that post told someone else to do. This is what worked for me and that other person on that post that I read a few weeks back. Whe you select your External drive in time machine, don't sign in as a registered user, sign in as a guest! That's all I did and no more error-1 or error-13. The drive just strated backing up right after that! Before it took awhile searching for the back up drive before it gave me those error messages and now it's backing just fine again,lol. I read pelople giving some long complex (though step by step) solutions, but for a non techie like myself, just reading them gave me a headache,lol. I figured I should should at least try and see if that helps someone else becasue it was real frustrating and I'm guessing anyone would feel the same when trying to fix this thing. Anyways! try that and I hope it helps. Good Luck!

Similar Messages

  • Time Machine can't find external drive after installing Lion

    Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro  says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

    Does the drive work when just directly connected? If so, have you prepped the drive?
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Time machine can not access time capsule after upgrade from snow leopard to mountain lion

    Two days ago I upgraded my 2009 17" MBP from Snow Leopard to Mountain Lion. That evening my time capsule/time machine combination worked fine and did an incremental backup of about 12 gigabyte. Yesterday - only one day later - the time machine backup did not work anymore.
    It appears that the system can not find the time capsule - even though it shows the remaining free space on the time capsule (so it did find it after all).
    The message is always the same:
    Time Machine can not complete the backup "Time Capsule"
    The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
    I also can not delete the backup image on the time capsule since it is read-only. And I do not want to format the time caspsule yet since my wife's MBAir is also using the same time casule.
    I tried out all kinds of suggestions (hard and soft resetting both the MBP and the TC, entering the password again, setting the TC up again) all to no avail. No backup is possible anymore.

    Mr. Zooot wrote:
    Time Machine can not complete the backup "Time Capsule"
    The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
    I also can not delete the backup image on the time capsule since it is read-only.
    Sounds like you got this message earlier:
    If so, see #C13 in Time Machine - Troubleshooting.
    Offhand, I don't recall anyone not being able to delete one via the Finder (but most were only backing-up one Mac, so just erased the disk).
    You may have to wait for that message to appear again (24 hours later), or you might try holding Alt/Option with the TM icon in the menubar, and select Verify Backups if it will let you.

  • Time Machine can't access local snapshots

    I have seen other posts on this topic but haven't really found any clear answers, so thought I'd check to see if anyone has found any solutions yet.
    When I attempt to use Time Machine without my external drive attached, I get the "Your Time Machine backup disk can’t be found." error message rather than displaying local snapshots as usual. Sometimes I will get the error mssage, then Time Machine will launch and immediately quit. On occasion it will fuction properly, but it is seldom and unpredictable.
    I noticed it for the first time after updating to 10.9.2 today, but prior to this I haven't used the feature for quite a while, so hard to say if it is necessarily caused by the update. Other posts I've seen seem to idicate it has been happening since the initial launch of Mavericks.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Time machine can't access the backup disk ''time machine backup'' on WD My Cloud, Time machine can't access the backup disk ''time machine backup'' on WD My Cloud?

    Every time I try to start my Mac's time Machine receive above message and it seems no possible to reopen/start properly the application.
    What is error OSS 2?

    WD Back up connection problems for Networked WD hard drive
    “Connection failed”
    “Can not find server”
    “There was a problem connecting to the server “WD ShareSpace-Backup”.”
    There may be two problems and associated solutions:
    Read only access
    It may be necessary to “create” a disk for the WD back up.
    Change Read Only Access
    The WD hard drive may automatically create a share for the Time Machine. This share appears in Finder as “WD_Backup”
    If you open WD interface through a web browser and go to
    Advanced Mode > Users>Folder Share permissions
    You will see it as “back up” or similar.
    As indicated by others click on the icon on the far left – a pencil and paper – and change the “NFS Access” from “Read Only” to “Full Access”
    For Networked back up dives it may be necessary to “create” a disk for the WD back up.
    The WD hard drive may automatically create a share for the Time Machine. This share appears in Finder as “WD_Backup”
    The password is “backup”, although others have suggested it is sometimes “admin”
    If when you open “Time Machine” and “Select Disk” time Machine says it “can not find…” or “can not connect to…” the server/disk it may be necessary to “create”, ”map”, or manually force your mac to connect to the “WD_Backup” folder share.
    To do this
    Open Finder
    Select GO>Connect to Server
    In the box at the top enter the IP address for your WD drive. You can find this in the top of your web browser or through your web browser interface with your WD Drive:
    Advanced Mode >Network>LAN
    The IP address will probably be in the format
    “192.168.0.X” where “X” is a number particular to your network
    In my case X used to be 2 but then changed to 3 – I don’t know why.
    Click “Connect” and enter the Name and password
    Name: “WD_Backup”
    Password: “backup”
    Click “registered user” and click “connect”
    Click the “+” button to add the server to the list in the lower box.
    Now open “Time Machine”
    Click “Select Disk”
    Your new “disk” / Folder share should appear in the list with the IP address below it thus:
    WD_Backup
    On “192.168.0.X”
    As in the screen shot below.
    Select this disk by clicking on the disk and then on “use disk”.
    You should now be away………….

  • Time Machine can't access to WD Mybook WE backup

    I'm getting a little bit foul with Time Machine and Wester Digital MyBook World Edition 1TB disk!
    I’ve the TM working fine till I made some Mac OS update, it was here that the TM stop working!
    In Finder I’ve 2 file servers mapped, MyBookBack and MyBookBack-Backup.
    I can access to the folders and files at MyBookBack, but I can’t access to the MyBookBack-Backup, which is normal.
    But now the TM don´t work! When I acess to Sistem Preferences > Time Machine, I’ve TM disabled and when I choose a disk the TM list the WD_Backup at MyBookBack-Backup, then I choose to use it to security copy, he asked for User and Password of the TM user at WD, and then… start thinking with the color wheel running indeterminably!!!! I Just left it by 48Hours connected and nothing happened! I have to force to quit the Sistem Preferences to stop it!
    The same happens when I tried to reach to TM data using the Migration assistant and select MyBookBack-Backup
    Can anyone help me? I haven’t any backups since almost 2 months ago!
    Many thanks and have a Happy New Year free from BUGS!

    I have a similar issue with the 1Tb Mybook World Edition that it decides to go offline for an unknown reason.
    I a running version 01.02.05 on the MyBook (latest version) and OSX 10.6.6 on my MacBook Air.
    Following a series of test the issue seems to be with OSX 10.6.6.
    The reason for this statement is the following:
    - I have a Mac Mini G4 running 10.4.11 and it never looses the NAS. Never.
    - If you reboot the Mac Air it will re-register the NAS and all works normally (Time Machine and File Sharing) until the next 'glitch'
    - I installed 10.6.4 on the Mac Air and low an behold the issue with the NAS has disappeared.
    - After running the Mac Air on 10.6.4 for 3 weeks I proceeded to update to 10.6.5. After 24hr the inaccessibility issue resurfaced.
    My interpretation on the above is the some thing has been modified in the AFP following 10.6.5 which is 'incompatible' with MyBook NAS

  • Time Machine -- can't access parts of backups

    Prior to upgrading my MacBook Air to Yosemite, I made a Time Machine backup, removed temporary stuff I didn't think I'd need any more, and made a bootable clone of Mavericks using SuperDuper!  The upgrade went fine, but after a while I realized one of the things I'd removed (Adobe Lightroom catalog, having transferred all the image files from the MacBook Air to my desktop machine) contained some information I needed.  My attempts to restore it have run into an odd problem, and I'm hoping someone has some ideas that can help me.
    I have the backup disk connected, and when I start up the Time Machine application it shows the expected backups in the "ruler" along the right-hand edge of the screen.  However, for the most part, I cannot "go back in time" to find the files I want from before I deleted them.  What I mean is that, for most locations I select from Finder's sidebar, the "backwards and forwards" buttons are grayed-out and inaccessible.  For a few locations (Desktop, and the system Applications folder) the buttons work as expected and I can access any backup date I wish.  For a few others (e.g. "All My Files") the "backwards" button is available but clicking it takes me to the very first backup stored (8 months old) and "forwards" takes me to "Today (Now)".  None of the intervening backups are available for that location.
    I've used the Terminal app to navigate down the directory hierarchy of the backups on the Time Machine volume.  I can find the files I want there, so it's not like Time Machine had failed to back them up.  However, it refuses to show them.  I tried using the Terminal to copy the files back under my home directory, but the filesystem ACLs and extended attributes were causing problems (Lightroom thought it didn't have write permission).  Deleting the ACSs and xattrs got Lightroom to run, but it's clearly confused (shows blank thumbnails, has exif data but not captions) so something's not right.
    Wondering if this is a Yosemite issue, I rebooted the machine onto the Mavericks clone and tried running Time Machine there.  I get the same results.
    Someone at work suggested that leaving the Time Machine app running for an extended period of time might fix the problem.  I've had it running for 7 hours now and while a few more locations started working, the ones I want aren't.
    Anyone know what's going on and how to fix it?

    Even weirder -- the problem I described above happens only with certain windows. WIth others, I can open the earlier backups.

  • Time Machine Can't Access Home folder

    I am using OS X 10.8.3 and my home folder seems to have been deleted without saving (malicious activity by family memeber with somehow gained access to his mother's account that has admin privledges).  I've tried restore via Time Machine (TM) which has worked in the past for minor file recovery issues but, I cannot access the "home" folder on the backup (external) drive any longer; I can "see" the home folder, but it is lightly shaded.  I also am having trouble rebuilding my iTunes library - I can see most, but not all of my tunes - other cannot be found on either the iMac-HD or the TM Backup.  Finally, not all of the iTunes purchased material is accessible via the iCloud download (tunes and app downloads).  So I am pretty much dead in the water.  I hate bringing up  stupid questions but I am not a tech sorrt of guy - I can use a hammer without having to know the physics of inelastic collisions, so my apologies.  Any suggestions?

    Boot into Recovery (command-R at startup) and select Restore From Time Machine Backup from the OS X Utilities screen. Select the snapshot you want to restore from. All data on the volume will be erased and replaced with data from the snapshot.

  • Mac Time Machine - Can't Access Backup

    Successfully connected Canvio Home and installed all software.  I have run several Time Machine Back-Ups.  When I look in Finder I see the Canvio, can navigate to other folders on the Canvio, can copy files to/from the Canvio from Finder, but cannot access or view the folder where the Time Machine backup should be (CLNAS-BACKUP, where CLNAS is what I renamed the Canvio to).
    When I try to connect to CLNAS-BACKUP I get a "connection failed" message.  But when I try to click on the "Connect As" button to connect as a different user - the login dialog box does not display.  I am able to disconnect and reconnect to the public folders on the drive. and I've tried ejecting and reconnecting to the drive - no change.
    Not sure if this is a Mavericks issue or a Toshiba issue.  Really hoping for the former, as I have tried three other network drives and none have successfully completed a back-up - Toshiba was the first.  But not much use if I can't access the backup
    Set-up:
    > Canvio Home 3TG
    > iMac Intel Core i7 | 16GB RAM running OS X (10.9.4)

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Time Machine: Can I access files from a PC that are on my external drive?

    If my iMac were to crash or die, I cannot afford to get it fixed or buy a new iMac, and the only computer I can then use is a PC, could I connect it to the external hard drive Time Machine had backed up to and access files, photos and music? Thank you in advance for your feedback.

    Ok, thanks. Yikes, that is extremely limiting. I guess I need to buy a separate external hard drive to backup important stuff in a way accessible from other computers like a PC. What about accessing files and photos from the current Time Machine hard drive from another Mac, say a friends, where I am not restoring everything to the Mac?

  • Time Machine can't access Airdisks

    Hi,
    I've got 4 brand new Iomega USB2.0 harddrives hooked up to my Airport Extreme (802.11n). The drives successfully mount on Mac and Vista. However, Time Machine only marks one of these disks as useable. Yet they all have plenty of unused space.
    One screenshot says all:
    http://www.flickr.com/photos/garrulus/2390560536/
    I have found the Airdisk functionality to be both useful and unreliable. Disks that work perfectly one day, don't show up the next, etc... I guess it's mostly a driver/firmware related issue?
    Thanks for your feedback.

    Well unfortunately I cannot provide and answer, but you can add me to the list of people who have one drive that has the file and one drive that doesn't.
    I have two drives:
    1) "FUJITSU MHW2120BH"
    This is an 120GB 2.5" drive in an external USB enclosure
    2) "WD 10EAVS External 1.65"
    this is a WD 1TB drive.
    I didn't do anything differently for one drive over the other. I attached both drives to a Leopard based machine and configured them for backup through the Time Machine Pref pane. I started a backup to both drives. I then moved them over to an AEBS. The 120GB drive shows up and the 1TB doesn't.
    When looking at the directories I see that one drive has the ".com.apple.timemachine.supported" and one drive doesn't. The drive that has the file shows up and the other doesn't.

  • Time Machine No Longer Finds Mounted Sparseimages after upgrade to 10.6

    Wondering if anyone has a solution or workaround for the following. In Leopard I had no problem having Time Machine backup my mounted sparseimage drives and would exclude the physical hard drives these were mounted on. However, since upgrading to Snow Leopard the other day, Time Machine no longer includes the content of the sparseimage drives in the backup (it is not seeing them even when they are mounted). Presents a problem as I only want Time Machine to backup the files within the sparseimage drives that have changed, rather than backing up the whole sparseimage each time. Any suggestions?
    Thanks!

    Marco1975 wrote:
    Hi,
    Since I have updated to 10.6.1 (over 10.5.8), my time machine only returns error messages. I am backing up 3 computers on 2 disks via airport extreme and it worked perfectly under 10.5.8. Since I upgraded to 10.6.1, I cant mount the disk or if it does, stops after 5 gig.
    With no clue as to what error messages, all we can do is tell you to Start with the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    It will show you how to locate the message(s) that describe the problem, then help you fix it.
    If that doesn't help, please start a NEW THREAD in the SNOW LEOPARD - TIME MACHINE forum, with details, including all the messages, what you've done, and the results.

  • Time Machine backup over wifi not working after upgrade to 10.6.3

    I have a firewire external hard disk connected to directly into my imac which I use for back-up. The imac is wired into an ethernet LAN. I also backup my MacBook Pro to the same hard disk. The MacBook is connected to the backup disk via a wifi link to a router. All has been working well until I upgraded Snow Leopard to 10.6.3 and now the back-up is not working for the MacBook. The same thing happened after the last point release upgrade but at the time I thought it must have been user error. Last time I had to trash the backups and start from scratch. Can anyone shed any light?

    Try reselecting the drive (from the laptop) via TM Preferences > Select Disk (first select the "none" drive, then the correct one).
    If that doesn't help, try a "full reset" of TM on the laptop, per #A4 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.

  • Can't access shared music after upgrading to 8.0.2.20

    After upgrading iTunes to version 8 on my mac, the shared music no longer appears. Has anyone else had this problem?
    The problem does not exist on iTunes for Windows 8.0.2.20 - I can still access shared music.

    Press the leftmost button out of the three in the top right corner of the window just above View.
    (39759)

  • Time Machine can't access the backup disk "Data".

    The operation couldn't be completed. ( OSStatus error 22. )
    anyone else having this problem when trying to back-up on TC ?

    Strange.. two in a row looks bad.
    I want you to ensure you have ipv6 set to link-local for both wireless and ethernet on the computer.
    Power down the TC and leave it for an hour or two.
    Then power it up again.. does it still have the same issue.
    Do a full factory reset.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Power down and see if it will come up again after an hour with the same problem.
    Go to the Disk tab of the airport utility .. is the erase button working.. please try and do a quick erase first.. does that work? If not try a one pass erase?
    If everything fails.. ring apple support .. or do that anyway and let them talk you through the problem.
    The fact that it worked for 3days and failed and the first was dead out of the box might mean you have some other issue.. but I cannot figure out what it could be. Hard drive failure early on is not unusual.. two in a row is.

Maybe you are looking for