TOO MUCH TIME-REPORT GENERATION

REPORT PROCESSING TAKES LOT OF TIME BETWEEN MACHINES OVER NETWORK
ONE MACHINE IT TAKES 5 MINUTES SAME CONFG OTHER MACHINE IN THE NETWORK TAKES 20-25 MINUTES, ANY CHANGES HAS TO BE MADE IN THE SERVER

Hi,
If the load of your system is very high, 10 minutes is much too long for STAD.
The solution that I use is to display shorter intervals (maximum 3 minutes in my most loaded system).
As rdisp/max_wprun_time is a dynamic parameter, a possible workaround is to increase its value during the time necessary to run STAD.
Regards,
Olivier

Similar Messages

STAD Report generation takes too Much time

Dear Experts,
In our Production system if we execute the STAD report for10 minutes to get the business transaction data for a single user or multiple users. Its taking too much time upto 500 sec sometimes throwing DUMP due to time out.
We have the issue from the begin itself.
What are the checks needs to done and how to fix the issue ?
Is that possible to schedule the same in Background to get the output and how ?
System Info:
ECC6.0 EHP4, Kernel Release 701 Support Pck - 55.
Windows MSCS Clustering.
SAPOSCOL on both instance.
Thanks,
Jai

Hi,
If the load of your system is very high, 10 minutes is much too long for STAD.
The solution that I use is to display shorter intervals (maximum 3 minutes in my most loaded system).
As rdisp/max_wprun_time is a dynamic parameter, a possible workaround is to increase its value during the time necessary to run STAD.
Regards,
Olivier

Report taking too much time in the portal

Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridath

Hi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

Report is taking too much time when running from parameter form

Dear All
I have developed report in oracle reports bulider 10g. while running it from report builder data is coming very fast.
But, If it is running from parameter form it is taking too much time to format report in PDF.
Please suggest any configuration or setting if anybody is having Idea.
Thanks

Hi,
The first thing to check is whether the query is running to completion in TOAD. By default, TOAD just selects the first 50 rows, where as Discoverer must return all the rows before displaying results if a crosstab report is used.
Secondly, check that the queries and the explain plans are the same in Discoverer and Toad. Although, Discoverer shows the SQL in the SQL inspector this isn't necessarily the SQL actually sent to the database. Use TOAD to interogate the Discoverer session to determine the actual SQL and compare this SQL and explain plan to SQL you ran in TOAD.
Thirdly, check that the session context is the same in both cases. So check that any custom contexts and the USER_ENV context is the same, and if any security packages or VPD policies are used in the SQL that these have been initialised the same.
If you still cannot determine the difference then trace both sessions.
Rod West

Still the report is taking too much time

Hi All,
When i refresh a webi report the report is taken too much time to refresh(open).
In back end i have checked all the connections, contexts, cardinalities, joins, conditions...etc, in webi i have enabled the the check box 'query stripping'.
but still the report is taking too much time, i didn't identified the problem?
Please help me on this.
Thanks in advance..

Hi Mark,
How many queries are there--2
How many rows are returned--- 2000+
Are all measures defined with aggregates-- Yes
What is the array fetch size? (I1000 if it isn't already)

Reporting time taking too much time

Hi Experts,
I created one query one of my data target and i executed query, it takes too much time, can any one tell me how can i resolve this issue? please help me out?
Thanks in advace
David

Check if the IC data is compressed or not?Compression will increase the performance of the query.
Check for the stats info using ST03 and analyse what need to be done .creating aggregates etc..
Use ST03N -> BW System load values to recognize the problem. Use the number given in table 'Reporting - InfoCubes:Share of total time (s)' to check if one of the columns %OLAP, %DB, %Frontend shows a high number in all InfoCubes.
You need to run ST03N in expert mode to get these values
based on the analysis and the values taken from the above - Check if an aggregate is suitable or setting OLAP etc.
Check the read mode for the query. recommended is H.
If the Query is built on the top of MP then
- including characteristic 0INFOPROV when you design the query for the MultiProvider so that you can filter by InfoProvider.
- Do not use more than 10 InfoProviders when you define a MultiProvider. If a number of InfoProviders are being read by a query at the same time, it can take a while for the system to calculate the results.

Taking too much time (1min) to connect to database

Hi,
I have oracle 10.2 and 10g application server.
Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
Please share your experience.
Regards,
Naseer

Dear AnaTech,
i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
Waiting for your great response.
Regards,
K.J.J.C

Full DTP taking too much time to load

Hi All ,
I am facing an issue where a DTP is taking too much time to load data from DSO to Cube via PC and also while manually running it.
There are 6 such similar DTP's which load data for different countries(different DSO's and Cubes as source and target respectively) for last 7 days based on GI Date. All the DTP's are pulling almost same no. of records and finish within 25-30 min. But only one DTP takes around 3 hours. The problem started couple of days back.
I have change the Parallel processes from 3->4->5 and packet size from 50,000->10,000->1.00.000 but no improvement. Also want to mention that all the source DSO's and target Cubes have the same structure. All the transformations have Field Routines and End Routines.
Can you all please share some pointers which can help.
Thanks
Prateek

HI Raman ,
This is what I get when I check the report. Can this be causing issues as 2 rows have % >= 100
ETVC0006           /BIC/DETVC00069     rows:      1.484    ratio:          0 %
ETVC0006           /BIC/DETVC0006C     rows: 15.059.600    ratio:        103 %
ETVC0006           /BIC/DETVC0006D     rows:        242    ratio:          0 %
ETVC0006           /BIC/DETVC0006P     rows:         66    ratio:          0 %
ETVC0006           /BIC/DETVC0006T     rows:        156    ratio:          0 %
ETVC0006           /BIC/DETVC0006U     rows:          2    ratio:          0 %
ETVC0006           /BIC/EETVC0006      rows: 14.680.700    ratio:        100 %
ETVC0006           /BIC/FETVC0006      rows:          0    ratio:          0 %
ETVC0007           rows: 13.939.200    density:              0,0 %

Procedure Taking too Much Time

Hi Guys,
I have package which contains number of function and procedure which is link with Oracle 's standard report called Prodction Shortage Report , it is taking too much time and even now days it is not finsih after three days.
So I am looking for some tuning steps which I can follow for all the queries one by one, I tried touse Explain Plan what it is showing not too much difference after movement of column from one location to another etc , even I have updated the existing indexes and also created new indexes.
Thanks
Shishu Paul

Shishu,
Is this report part of an Oracle product such as the Enterprise Business Suite (EBS)? If so, I recommend you create a Service Request (SR) with Oracle and have them tune the report. Doing your own tuning could cause you some support problems later on.
Just my two cents...
Craig

Client import taking too much time

hi all,
i am importing a client , i it has complete copy table 19,803 of 19,803 but for last four hours its status is processing
scc3
Target Client           650
Copy Type               Client Import Post-Proc
Profile                 SAP_CUST
Status                  Processing...
User                    SAP*
Start on                24.05.2009 / 15:08:03
Last Entry on           24.05.2009 / 15:36:25
Current Action:         Post Processing
- Last Exit Program    RGBCFL01
Transport Requests
- Client-Specific       PRDKT00004
- Texts                 PRDKX00004
Statistics for this Run
- No. of Tables             19803 of     19803
- Deleted Lines                 7
- Copied Lines                  0
sm50
1 DIA 542           Running Yes             SAPLTHFB 650 SAP*
7 BGD 4172   Running Yes 11479 RGTBGD23 650 SAP* Sequential Read     D010INC
sm66
Server No. Type PID Status Reason Sem Start Error CPU Time   User Report   Action          Table
prdsap_PRD_00 7 BTC 4172 Running   Yes    11711 SAP* RGTBGD23 Sequential Read D010INC
plz guide me why it is taking too much time , while it has finished most of the things
best regard
Khan

The import is in post processing. It digs through all the documents and adapts them to the new client. Most of the tables in the application area have a "MANDT" (= client) field which needs to be changed. Depending of the size of the client this can take a huge amount of time.
You can try to improve the speed by updating the table statistics for table D010INC.
Markus

SMQ1 deletion problem too much time larger queue

Hi Experts
We have to delete Queues from SMQ1, the problem is the data volume is huge in queues and system is taking too much time to delete these queues.
To delete 122000 records it took 4 hours to delete the queue from SMQ1.
Problem is we have to delete total of 51,48,000 records in total and one queue has huge data that is 26,10,000.
Is there any solution to fasten the process of deletion or any work around SMQ1 to delete the queues faster.
We are deleting queues in live system I mean the production system is up and running.
Thanks
Navneet

Hi Navnet,
Use the report RSTRFCQDS to delete the particular queue of SMQ1.
The report should check the inconsistencies between the tables:
TRFCQOUT, ARFCSSTATE, QREFTID and ARFCSDATA, therefore it will take time.
The fastest way to delete them is: you use a sql tool to delete all the entries in TRFCQOUT, ARFCSSATE, QREFTID and ARFCSDATA. In this case, you also delete the entries in SM58 (tRFC).
See also SAP Note 760113.
Rgds,
Colum

Sites Taking too much time to open and shows error

hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.

This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful.

White MacBook takes too much time to boot up

Hi there.
I got the topcase(keyboard) of my MacBook repaired. (White MacBook 2006) and after that it takes nearly 7 up to 10 seconds after pressing the power button that I first see apple logo and it boots up.
I'm not sure but seems like that detecting the hardwares take too much time .
any solution?
PS: I'm running Snow Leopard(10.6.2)

macbig wrote:
OK, 32 seconds is not good. I don't think it has anything to do with a keyboard repair. You need to try a little maintenance: Reset Pram - http://docs.info.apple.com/article.html?artnum=2238
Repair Permissions - http://support.apple.com/kb/HT1452
Run Disk Utility >applications>utilities>disk utilities>verify disk
How much free space do you have on your HD: Right click on HD icon and select "get info" in the drop down menu (if you don't have right click capabilities, highlight your HD icon, go file in the Apple menu, and select "get info" in the drop down menu. Let us know your results.
Yes PRAM was the the problem, I've already tried it from this thread http://discussions.apple.com/thread.jspa?threadID=2303507&tstart=0
by the way thank you .

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

TOO MUCH TIME-REPORT GENERATION

Similar Messages

Maybe you are looking for