TS3581 CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?

HELLO TO ALL
ABIGMAC1 HERE! GOOD DAY TO ALL
JUST WONDERING IF ANYONE COULD ANSWER THIS
CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?
I CAN USE AN AUX  3.5 TO 3.5 BUT NO WAY TO READ THE LIBRARY. PLEASE HELP ME!
THANK-YOU
ABIGMAC1

Check the documentation for the car audio system for device compatibility.  A shuffle may not be compatible.
If the car audio system is able to use a regular USB flash drive connected to the USB port, you should just get an 8GB USB flash drive for $5-10, load it with your "car songs" and leave it connected to the car audio system, instead of constantly connecting and disconnecting an iPod.
If the car audio system has an aux. audio input mini-stereo jack, you can get something like this
http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
and connect your shuffle's headphones jack to the car audio system.  You can then use your shuffle to play through the car audio system.

Similar Messages

  • HT4108 Can you connect an iPad to any TV to Skype or use the Internet?

    Can an I pad connect to any TV in order to Skype or use the Internet?

    No, you will need a computer that can be host for the USB dongle.
    Unless your dongle has hotspot functionality (can create littlle private wireless network), then you should be able to connect to it.

  • Can you program a Slave's Node ID or Zone ID using the USB-8476 as the LIN Master?

    I am planning on using the USB-8476 LIN interface as the LIN bus Master in an application.  The application would require the USB-8476 (Master) to program a Node ID and Zone ID into a slave device that is on the LIN bus.  The slave device is a PIC12F1822 mcu + MCP2021 LIN transceiver.  After reading through the User/Software Manual for the USB-8476, it does NOT seem possible to assign an ID to a slave device.  It seems like you can only communicate with slaves that already have an ID programmed into their memory.  The Node/Zone ID terminology is used by our customer and may not conform exactly to the IDs associated with LIN.  I am new to the LIN world, so please let me know if you need more information about what I'm trying to accomplish.  Can you program a Slave's Node ID or Zone ID using the USB-8476 as the LIN Master?

    No need to respond to this topic.  The company that builds the slave device has a communications specification that was recently provided to me.  I should be able to use the NI USB-8476 and a call to the ncWrite function (NI-CAN Frame API function) to accomplish my goals. 

  • Can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to chnage the passwords, I haven't used the account since 2010?

    can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?

    Hi eddinchina,
    You should have no need to use the Old Sync account.
    As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
    You may use the same email address with both accounts.

  • Can I use the same USB cable for both the iPhone and the iPad?

    Brnad new user of the iPad - can I use the same USB cable for both the iPhone and the iPad?  The iPad does not charge when plugged into the computer or the wall (110V) adapter.  I've been able to sync in iTunes using the same cable on both.

    Actually, the iPad charger works just fine with iPhones and iPods.  The iPod/iPhone charger will charge an iPad very slowly but no harm will be done.

  • How can you connect your iPod touch to your Vista computer without using Apple Software

    How do you connect an iPod touch to your Vista computer without using any Apple products

    There is no other legit way to sync your iPod than using iTunes. There is 3rd party software to transfer content from the iPod to your computer, but not from the computer to your iPod.
    Disk mode is not supported.
    See also: http://www.apple.com/ipodtouch/specs.html

  • How can I stream music from my ipad2 to my car stereo using bluetooth?

    Trying to connect my ipad 2 to my car stereo using bluetooth.  Do I/can I do this with or without additional harware?

    I don't think it's possible.
    If the hyperlink doesn't work, try again.  There is a problem at the Apple site.

  • I can't connect to my iTunes library on my Macbook Pro using the Apple Remote app on my iPhone 4S. Why?

    Hi all,
    I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
    I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
    Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
    Connecting directly to iTunes using a four digit passcode.
    I've tried both methods, and neither work!
    Here's what happens for each method:
    From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
    From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
    After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
    I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
    I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
    I'm kind of at the end of my rope here. Anyone?

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • Can I connect my desktop Mac to my laptop Mac and use the desktop Mac as a monitor?

    I have a late 2012 iMac with a 21" display at home. My work computer is a MacBookPro from early 2011. I would like to connect the laptop to the desktop and use the desktop computer as a monitor. Is this possible? I've heard everything from "yes you just need a USB to USB cable" to "no, only 27" monitors can support this".
    Straight answer please?

    Welcome to the Apple Support Communities
    That's possible. 27-inch iMacs and iMacs with Thunderbolt (Mid 2011 and later iMacs) can be used as an external display for other computers > http://support.apple.com/kb/PH11302
    The Late 2012 iMac has got Thunderbolt ports, and your Early 2011 MacBook Pro has got also Thunderbolt, so you just need a Thunderbolt cable to connect both Macs. Then, press Command and F2 keys in the iMac to use it as an external display for the MacBook

  • HT1758 Can i connect my non apple laptop to my iMac and use the iMac as an extra/dual screen while using my laptop?

    Got a new laptop from work, no choice on the type, but want to plug it's docking station into my iMac so I can use dual screens while using the laptop. Can I use the Ethernet port for this?

    Welcome to Apple Support Communities
    Target Display mode only supports Late 2009 and Mid 2010 27-inch iMacs, and Mid 2011 and newer iMacs to use them as external displays, but it only works over Mini DisplayPort or Thunderbolt, not Ethernet.
    Your PC needs Mini DisplayPort or Thunderbolt (depending on your iMac) to be able to use your iMac as an external display, so it is probably that you cannot use the iMac as an external display. Instead, look for information in the Internet about VNC viewers that allow you to do that

  • Can I charge iPad 4 with my iPhone 4s charger but use iPad 4 USB cable

    Can I charge my iPad 4 with iPhone 4s charger while using ipad4 USB cable

    You can use the iPad charger to charge the iPhone, and it will charge the iPhone faster.
     Cheers, Tom

  • If i use a usb flash drive which is both os and windows compatible can i transfer files from my mac to a windows pc using the same usb flash drive?

    if i use a usb flash drive which is mac os and windows compatible can i use it to copy files from the mac to a windows machine. i have to do some training abroad and wnat to take the files on a usb from the mac but they will only have a windows operating system available to me.

    Generally, it's not the flash drive that makes it compatible, but the formatting used on it.  In Disk Utility on a Mac, the format is called MS-DOS (FAT).  In Windows, I believe it is called FAT32.
    A USB flash drive formatted that way should be readable and writable on both Mac OS X and Windows.  But you may want to try a "trial run" before relying on it for the trip.

  • Does Shuffle 4th gen use the same USB cable as previous gens?

    I just bought my GF a Nano after we sold her Zune HD because she just needed simplicity however the day after I added a hundred songs or so I frickin lost the USB cord that came with it. Like its so small that it could be anywhere and Am wondering if I can buy any shuffle gen charger for a replacement as I have found them pretty cheap. if any one could help that would be amazing!

    Yeh. ther eare tons out there..
    This one below will work and it's less than a buck.\\
    http://www.amazon.com/SYNC-CABLE-CHARGER-Apple-SHUFFLE/dp/B0030LVHM6

  • How do i get video from my sony hx100 digital camera to my mac? after connecting the camera via the supplied usb cable, iMovie shows icons for 5 videos, but none will load.

    i've connected the camera to the mac using the supplied usb cable. imovie shows 5 icons for videos but all of them have the red circle with slash through them and the box to import them is grayed out.

    Get a nice Sony miniDV camcorder. It is not too expensive; it is small and easy to carry around to shoot your video. Most importantly, it will be instantly compatible with iMovie. You don't have to install any software, just connect it via FireWire (Sony calls this iLink) and you are good to go!
    I have had several Sonys and love them. You don't need one with fancy editing capabilities because you will edit your movies in iMovie. Just be sure that it has AV In and Out so you can import and export back to the camcorder.
    My current version is the small DCR HC-26. There are newer versions of that HC-30something and 40something. Look at the specs on Sony's website
    Some of them require the use of a dock to import and export. I am not really fond of that feature. I like just connecting directly to the camera.

  • Can you connect 2 apple TV's to the same iTunes account in 2 different houses ?

    Can you connect 2 apple TV's to the same iTunes account in 2 different houses ?

    Can you watch them both at the same time?

Maybe you are looking for