Unable to assign item category product in SAP CRM

when i am creating product(Material) i was unable to assign item category to Product.
In products, My Item Category (Which is created ) is not loading in Item Category Assignment block.
Plz give me appropriate Solution, Any Help will be highly appreciable

Hello Ravi,
CRM-specific questions can be posted on the http://scn.sap.com/community/crm Space, so the CRM specialists can note your question earlier.
Perhaps you can try to post this question there too.
Best regards,
Laszlo

Similar Messages

  • Item category group in SAP CRM

    What is Item category Group and what does it signify? How is it different from Product Category?

    Hi Chiatra .H
    Item category group
    The item category group is a field stored in the product master. Within transactions at item level, the appropriate item category should be automatically determined
    by the system when entering a product. For this to work, you need to make settings for item category
    determination.
    Product Category
    A grouping together of products from your product master data, in a structured hierarchy Your structure and organize your product catalog using catalog areas and subareas, which you then arrange in a hierarchy. You assign products to these areas and subareas.
    You use product catalogs to group together products to present them in the Web shop, Interaction Center, or in other forms of media..
    I think Its solve your doudt
    Please let me know if u have any questions
    Regards,
    srikanth.naga

  • How to assign item category group with item category

    hi SAP gurus,
    i want to know how sales item category(e.g. TAN) are assigned to a item category gorup (e.g.NORM). because with Material type we assign item category grp and according to that in sales order it find the suitable item category.
    Regards,
    BKR

    Dear,
    Item cat. is determined by:
    Order Type + Item Cat Grp + Usage + Higher Lvl Item Cat
    Order Type: QT/OR/...
    Item Cat Grp: from material master mm03 sales view
    Usage: normally 'blank'
    Higher Lvl Item Cat.: use when BOM explosion is involved
    See tcode: VOV4 for details.
    Ken

  • Assign Item Category to Schedule line

    Hi Gurus,
    Can any one please tell me where do we assign Schedule line category to Item Category in IMG
    Regards
    ajoy

    Hi,
    Please refer following link to get complete idea of schedule line category
    http://sap-sd-certification.blogspot.com/2013/01/determination-of-schedule-line-category.html
    http://sap-sd-certification.blogspot.com/2013/01/functions-of-schedule-line-category-in.html
    Please let me know if you have any queries
    Chirag

  • Assign Report Category to a SAP Query for PNP LDB

    Hello Folks,
    How to Assign a Report Category to a SAP Query which is using LDB PNP.
    Regards,
    Nishanth Kumar

    Hi,
    SE38 -> Report name -> attributes ->  HR Report category
    Regards,
    Dilek

  • SolMan 4.0 CHaRM: Insert Item to Normal Correction: Item category / product

    I'm looking for some detailed documentation on <b>how to insert items to a Normal Correction</b>.
    When I add an item with (standard) product SAPCUSTPRGOPT and choose the (standard) item category SDCR ("best I could find") then I get the error "<i>The item category 'SDCR' is not permitted for product 'SAPCUSTPRGOPT'</i>."
    Now I'm looking for an example that will show me <b>how to insert an item with standard SOLMAN 4.0 settings</b>. I hesitate to step into the CRM customizing details prepared by SOLMAN, instead I would expect that standard setting should work if used properly.
    Thanks for help.

    No further interest in this topic.

  • Where do we assign ITEM CATEGORY USAGE to a material?

    Hi all,
      I have understood the calculation of ITEM CATEGORY based upon ITEM CATEGORY USAGE and three values.
    Can someody tell me where do we link this ITEM CATEGORY USAGE and the Material?
    Where do we assign this ITEM CATEGORY USAGE to a Material?
    Thanks and Regards,
    Max

    hi
    item cat usage is basically one of the factors that determines the item category.
    this is assigned in item cat determinmation VOV4,
    as you can see there USAGE field  basically suggessts, the nature of the item.
    for example if the item is normal item,the usage field is left blank,
    if it is a free item, then usage will reflect 'free".
    like wise for text item "text"and so on.
    from this you can understand what is the charecter of the item.
    hope it is useful to u.
    suresh

  • Unable to change item category in Create SA with ref to contract

    We have a  centralised subcontracting contract (item category "L") in place for a material. The requirement is to create a scheduling agreement with reference to this contract line item item category "Blank" (Standard).
    But the item category field is greyed out (display only) when we try to create scheduling agreement with refernce to contract on the "Adopt + Details" screen. And we are not able to change the item category "L" to "Blank". Is there a way we can make this item category field editable on this screen before we hit "Adopt + Details".
    I have tried most of the field selection configuration, but there is no specific field selection group for this screen.
    Please note that the system allows you to change the item category when you create a PO with reference to this contract.

    Thanks Manu for your suggestion!
    But this is the process that we need to map. Request others to respond if they have comes across such a requirement and able to address it.
    Again I want to make a note here that if it is possible on POs, there should be a way to make it work for SAs.

  • Unable to Change Item Category in Sales order

    Hi all,
    I am creating sales order with reference to sales contract but at the time of sales order we don't have en off stock to deliver to customer , so we have deiced to Third party sales process
    But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
    Can any one guide me how sales order line item should be in active mode so i can change the Item category as a TAS third party item category
    Help me regards this
    Thanks
    Rajesh

    hi,
    You can  the item category field (VBAP-PSTYV)  editable , if item is configurable (item category TAC), then change item category to TAS.
    by using include  MV45AFZZ -  FORM USEREXIT_FIELD_MODIFICATION.
    when screen 4001 or 4003.
       IF VBAP-PSTYV = 'TAC'.
               SCREEN-INPUT = 0.
              MODIFY SCREEN.
            ENDIF.

  • Unable to view Spare Part Components in SAP CRM Service Order

    Hello All,
    We are implementing CRM 7.0 Ehp 2.0
    As per the following video it is now possible to integrate the spare part components in the CRM Service Order, using the BOM replication and Product Proposal functionality in SAP CRM
    SAP CRM 7.0 - Integration of ERP BOM Information in the CRM Product Proposal
    However in our case we are not able to achieve the desired results.
    Following configurations are done
    1) The BOM is replicated from ECC to CRM the same can be viewed in commpr01
        Material 4561 is the main product and 4562 is the component
    2) The item category for the main product is YRVS where the customization for structure scope is done
    3) For the Product Proposal customization's, I have created a new method schema
    4) The transaction type and the sales org are assigned to the method schema
    5) However now when I am creating the service order, I enter the sold to party, the product id
    6) Next  I go to the line item to click on product proposal.
    7) The system issues the below message
    Please advice if I am missing on any configurations.
    Kind Regards
    Atul

    Hi Raghavendra,
    Thanks for your reply, appreciate the same, I have now added the relationship objects as per your post above in comm_hierarchy for the particular category
    Now  in the product master , I am now able to view the tabs(screen shot attached)
    Next I create my BOM in ECC with BOM Usage 5 and save the same
    Next I run the initial download for the adaptor object  BOM in SAP CRM
    When I check in commpr01 for the material 4561 the component and the main material have not come.
    Can you please advice further.
    Kind Regards
    Atul

  • New item category not visible in CRM WebUI

    Hi,
    I am working on CRM 7.0, Leasing Contracts component BT114H_LAM.
    I created a new item category for the contract however this is not visible in the WebUI screen. the moment i enter the item it dissappears from the screen. It is available in the item details.
    Same item is visible in the Backeng SAP GUI.
    Can anyone suggest some solution for the same.
    I have done all the customizing required for the new item category in SPRO-Financial Services->Basic Functions->User Interfaces->CRM Web client UI
    Waiting for some quick reply
    Regards,
    PP

    Thanks fo ryour input.
    There was somethng else that was missing from customizing.
    regards,
    PP

  • How can we create Versions for Products in SAP CRM

    Hi All,
    We want use Product Versions in our CRM IC Webclient. We want to be able to select a product and then have a list of versions to pick from. Can anyone tell me if they have configured Versions for Products in their SAP CRM system. If yes, then how did you go about it.
    Thanks,
    Ramesh Nallabelli

    Hi Arup and Shanthala,
    Thanks for the prompt responses. Appreciate your help. We want to create Product versions like this: Product: Windows OS Version: 95, 98, XP, Vista, 7, etc.
    When I try to create a configurable product, using the Configuration tab, to create or use a product model I see an error message: PME installation with errors The long text is: The environment variable PME_HOME that includes the PME application has to exist locally in order to start the PME from CRM.
    This indicates the configuration of IPC in our CRM system. This is something that we have not undertaken so far.
    When I use the Poduct Variants tab to create a product variant for a configurable product, I can't edit here. This view opens in a display only mode. After reading some more about this, It looks like variant configuration needs to be used in tandem with ERP variant configuration. There might also be a need to recreate this in the Java configuration engine. We are going to create these products in CRM only, so this might not work for us.
    Regards,
    Ramesh

  • Unable to assign Item to INV Organisation

    Hi
    I was not able to assign my Item in the Item Master window to child Organisation.
    The Assign Organisation function in the tools menu is freezed.
    When i get thyrough the Organisation assinment icon,the Inventory Orgs are not available in the list.
    Help me out in this regard.
    Regards
    Deepak
    l

    Hi Deepak,
    May be your inventory organization setup is wrong. Check for the inventory organizations, in the organization parameters the Item Mater Organization field.
    Do you have the same master organization in which you are defining/
    please let me know.
    Regards,
    Jagan

  • Creation of new product hierarchy and products in SAP CRM.

    Dear all,
    please help with resolving of following issue:
    In CRM system base hierarchies were replicated from R/3 system with materials. Current requirement is to create new materials in CRM directly (as standalone scenario). As far as I understand, I have to create new hierarchy with required list of set types in order to allow creation of products in CRM directly (product type = material). Can anybody describe changes in the system step by step, what should be changed and where?
    As a result I need to have a possibility to create products in CRM directly for sales scenario processing.
    Thank you in advance!

    Hi Jorge,
    thank you so much for your reply!
    Here what I tried to do:
    1. I created new category in hierarchy R3PRODSTYP, added 3 set types: COMM_PR_MAT, COMM_PR_SHTEXT, COMM_PR_UNIT as basic set types.
    2. In the SPRO - Cross-Application Components - SAP Product - Settings for Product Type - Number Assignment - Define Number Ranges for the Product Type "Material" I found my new product category is unassigned, so I assigned it to the "CRM Products" group.
    3. Farther I tried to create a new product for created category in CRM Web UI, but was not able to find it in the Base category search field. All categories correctly displayed from R3PRODSTYP, but my new category is absent. What can be the reason of category absence? Btw, it cannot be found even when I try to display whole hierarchy in Web UI, however, in SAP GUI, it can be seen via tcode comm_hierarchy.
    Here is the setup of hierarchies in the system:
    I have no idea how to check #3 "Ensure the hierarchy is assigned to CRM application".
    Can you please suggest, what should be changed in addition? Thank you!

  • Configurable Product in SAP CRM 5.0

    Hi All,
    I'm using CRM 5.0.
    In CRM 5.0, i should download material, sce, and condition type from R/3 or ECC.
    Is it possible for create material, sce, and condition type in CRM? Is it possible for create configurable product in CRM? Not download from R/3 or ECC.
    If possible, In which t-code should i access in CRM?
    Thanks.

    Hi Fariz,
    In sapgui, you can use transaction commpr01 to create products. Once you click on create button, you will be asked to enter product category. Next to that will be a check box named 'Configurable', which you can check to make the product configurable.
    For more info on Product creation, you may also refer to the foll link:
    http://wiki.sdn.sap.com/wiki/display/B1/ProductConfigurationinSAPCRM
    Hope this helps.
    Regards
    Nisha

Maybe you are looking for