Unable to load the flat file from client work station

Hi,
I am trying load a flat file (.CSV file)from my desktop (Client work station) and getting the following error.
An upload from the client workstation in the background is not possible
Message no. RSM860
Diagnosis
You cannot load data from the client workstation in the background.
Procedure
Transfer your data to the application server and load it from there.
I have recd a .XLS file and then I have converted to .CSV file , which I saved in my desktop and trying to load the same.
Please help me how to go about this?...
Thanks in advance.
Christy.

Hi All,
Again, I have tried to load the flat file from clint work station with direct loading..I have got the following errors..
Errors : 1
Record 990: Contents '50,000' from Field /BIC/ZPLQTY_B Not Convertible in Type QUAN -> Long Tex
like this i recd so many errors.
ERROR : 2
Error in an arithmetic operation in record 259
Please help me how to load the flat file successfully.
If I hv to save the flat file in Appl server..how to do that..Please provide step by step instruction..
Thanks
Christy

Similar Messages

Conversion_Exit_Cunit_error occured while loading the Flat file data

Hi
Iam tryign to load Flat file data into an ODS, i am getting error like Error Conversion Cunit.
Also we are using 0unit in the ODS for which CUNIT is a conversion rule
Can you please suggest me why iam getting this error

Hi Sunil
Hope you can check whether you are loadig the flat file data from application server or Client workstation.
May be if you are loading from Client work station you will face problem of this type.
Try to check if any change in format in the file.
at the end of the file delete the spaces.

LMS 4.1 error unable to load the MIB file

when load MIB file have error unable to load the MIB file Error: can't find RFC1155-SMI
I can not find RFC1155-SMI.my Where I can find or download RFC1155-SMI.my
Thank

The following thread has RFC-1212.my in it. You can downlaod from there :
https://supportforums.cisco.com/thread/174886
Mostly all the Cisco MIB will be available @ :
ftp://ftp.cisco.com/pub/mibs/v1/ OR ftp://ftp.cisco.com/pub/mibs/v2/
The above you requested are non-cisco mib, which can be extracted either from RFC or they canbe found in some univerisites FTP or some free sites like oidview :
http://www.oidview.com/mibs/detail.html
-Thanks
Vinod

Installation: my adobe elements version 12 is unable to read the raw files from my canon camera 70D.

my adobe elements version 12 is unable to read the raw files from my canon camera 70D.

You need Camera Raw 8.2 or higher.
Elements 12 shipped with 8.1.
Click Help > Updates to update Camera Raw

Load some flat files from ftp location

HI,
I have requirement, i want to load the some flat files from ftp location. but problem is in that ftp location i have multiple files.i want to load flat files starts with file name with numeric. otherwise i have apart from these start with numeric files .
i have remain 2 flat files with constant name. i need to load flat files starts with file name with numeric or i need to leave these 2 constant files then need to load remain start with numeric files. how to achive this in ssis for each loop container.

See these two examples:
http://microsoft-ssis.blogspot.com/2012/01/custom-ssis-component-foreach-ftp-file.html
http://microsoft-ssis.blogspot.com/2011/08/foreach-ftp-file-enumerator.html
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

ABAP Code for loading the flat files kept at FTP locations

Hi all,
I need to automate the process of data loading via flat files with the help of process chains , with respect to which I require following help:
1. what steps should I follow to load the data with respect that whenever the new file comes in the directory of the ftp location start that process chain for data load.(Note : there is no fix time that when the new file will be coming)
2. Every time the new file will be having differnt name , then in that case how we will be fetching the new file which is require for data loading?
Thanks and Regards,
Neha

Hi Neha,
I have not worked on this or made this code.
Recently my onsite did it.
Try to find more gyan on this functiona module...'DX_GET_PHYSICAL_FILENAME'
Code is... write it in infopackge start routine.
DATA: v_filename LIKE dxfile-filename.
Below function module generates the filename with the complete path
based on the app server attached to the Central Instance
The logical mapping Z_INBOUND_EBIZ_PAYMENTS is maintained in the
transaction - "FILE"
CALL FUNCTION 'DX_GET_PHYSICAL_FILENAME'
    EXPORTING
      i_filename             = 'Z_INBOUND_EBIZ_PAYMENTS'
    IMPORTING
      o_filename             = v_filename
    EXCEPTIONS
      not_registered         = 1
      logical_filename_error = 2
      OTHERS                 = 3.
IF sy-subrc = 0.
    p_filename = v_filename.
    p_subrc = 0.
ELSE.
    p_subrc = 4.
ENDIF.
Regards,
San!

Error in when loading the flat file for hierarchy

Hi all,
I get this error when i do the entire Hierarchy process and try to upload the flat fil in the infopackage.
Has anyone faced this kind of error.
No Transfer Structure Available SS_DEMOH IO_SRID_HIER (SY-SUBRC=5)
Can someone tell me how to proceed further.
Harish

Hi lakshmi,
I have checked it thrice before loading it through infopackage.Everything is fine.
Harish

Getting a error when loading the flat file

Hi,
I have created a infoobject called ID and i have a attribute name.I have assigned a data source and done the update rules.When i try to upload the flat file i get a error.
Error 8 when compiling the upload program: row 227, message: A newer version of data type /BIC/CCDHIO_SRPID_ATT
I have faced this problem earlier but now i am not able to rectify it .Can someone suggest me what to do.I am working on 3.5 version.
Thanks
Regards
Harish

Hi,
Check the Flatfile Infoobjects and in datasource structure ,It should be same order and check whther you you are ignoring header rows or not in infopackage
Regards,
Marasa.

Error when loading a flat file from Application server.

Hi,
I am trying to load a flatfile from the application server, and I am getting the message
Error while accessing the application server file
Message no. RSDS_ACCESS002
I checked for notes and found only one:
Note 1033978 - Correction: Loading Unicode files from application server
but we have 19 SP level, and the note says it needs 13 SP level, so I think it would not be of any help.
does anybodie know what to do??
thanks for the help.
Mauricio

Error in accessing while application server file..
when i am trying load the data to psa
when i am taking the file name: text-type file from app server
plz reslove me for this problem??
another question
when i am saving the file with using * in the filename in .CSV file its not saving,
whats the reason????
ASHOK

Unable to load the cap file to the JCOP card

I develop my applet by JCOP IDE and it works well in the VM. But when I want to load it on my JCOP card, I face a problem. it can successful send the 1st 254 bytes, but always return 6A86 when send the second 254 bytes to the card.
Status: Incorrect parameters (P1,P2)
Error code: 6a86 (Incorrect parameters (P1,P2))
Offending APDU: 6A86
Wrong response APDU.
I don't know why this happen. Can anyone show some light on that. Thank you in advance.

Have you written your own loader for this ?
What is the prompt "cm>" from, is that a standard Java Card tool ?
Looking at the data I can see, its looks well formed. However when I wrote my own loader I found I could only send 239 bytes of data (255 - 16) otherwise I'd get an error. Maybe part of this is todo with the option of using M-DAP to MAC each APDU. FYI its a JCOP10 I'm using.
Also my data was never concatentated, that is to say, check your 'FileSystem.cap' file with "unzip -tv FileSystem.cap" for the real CAP files. Each of these files never crossed an APDU boundary, the first one Header.cap (IIRC) is a small file, so my first APDU was less than 40 bytes of actual data (with C4 TLV data before it), certainly not 254 bytes.
I'm not sure if this is allowed or not, I've plans to try it out soon and see myself since i've not read anything that says you can not do this.
This is the only obvious difference I can see to other loader scripts and programs I have seen.

How to load the sequence file from the process model?

Does anyone have an example process model that loads a sequence file? The out-of-the-box process models assume the sequence file is already loaded. I want the process model to identify the UUT type and load the appropriate sequence file based on that.

Mark,
A better solution to your question can be accomplised if you have TestStand 2.0.
Within the entry point of a process modle you can set the client sequence using Execution.ClientFile(). This is a new method of TestStand 2.0. It was specifically designed so that you could dynamically set the client sequence within the process model.
Currently the entry points in the default process models (i.e. Test UUTs and Single Pass) are configured to Show Entry Point When Client File Window is Active. This means that you must open and have active a client sequence file before you can execute one of the entry point. You probably do not want this implementation if you are going to set the client file during the entry point execution. To change this you will need to go the sequence properties of your entry point (while the sequence is open select Edit>>Sequence Properties), switch to the Model tab of the entry point's property dialog box, and enable Show Entry Point For All Windows. The entry point will then appear whether or not you have an open sequence file active.
You will need to add at least 3 steps to your entry point sequence that all use the ActiveX Automation Adapter. Remember that MUST disable Record Results for any step you add to the process model. The 3 steps will perform the following tasks:
1) Obtains a sequence file reference of the file that you want to be the client sequence file. You will need to use the Engine.GetSequenceFileEx method. You will need a local variable (ActiveX data type) in which to store the sequence file reference.
2) Set the client sequence file using the Execution.ClientFile property.
3) Close the reference to the client sequence file in the Cleanup step group of your entry point sequence using Engine.ReleaseSequenceFileEx
I am attaching a SequenceModel.seq file (the default process model in TestStand 2.0) in which we have modified the TestUUTs entry point as described above.
Note that you'll be prompted to enter the path to your client sequence file. This is a message popup that you can delete and it was added for your review only.
Good luck in your project,
Azucena Perez
National Instruments
Attachments:
sequentialmodel.seq ‏164 KB

Getting the log files from client using java program

hi
this is lalita...and i am doing a project in networking.... i am new to socket programming....i have established the socket connection between the client and server...with this site members' help....now i have to get the log files of the client system from the server.... via the created socket....i need it by tomorrow...i.e apr 12th ....as i have to show it to my guide...
i just need a core java program that will get the log information of the client from the server......
Can anybody please help me in this regard..... it would be of great help to me and my group....
Anxiously awaiting for the replies....
Thanking you and regards...
Lalita.

Simple.
Server is listening on a specific port for the connection from the clients.
Connect the client with the server on the above mentioned port.
Open the streams on both side for the connection and run in separate thread.
Define a protocol for communication between client and server.
e.g after connection with the server the server send a text message to the client (send log) now the client first should the log file name and size to the sever and then send the file. the server should save the file.
then disconnect the client or want to get another file or for other tasks define the other commands

Unable to load the '.jsp' file

Hi all,
          We use Weblogic 8.1 sp3 and are devloping a struts based application.
          I have deployed my 'ear' file (containing a '.war' and a '.jar' file). We use struts. Our '.war' file, contains the pre-compiled 'jsp' classes (we have changed our web.xml to indicate that we are using pre-compiled jsps. I can show my web.xml file if you need).
          When I click on my 'submit' button, I see that my action class has been invoked and it's spitting out messages to the stdout. Everything looks fine. But, when it is trying to load the '.jsp', I get the following error.
          <b>
          Error 500--Internal Server Error
          javax.servlet.ServletException: [HTTP:101249][ServletContext(id=20736651,name=gta,context-path=/gta)]: Servlet class jsp_servlet._presentation._jsp.__link for servlet /presentation/jsp/Link.jsp could not be loaded because the requested class was not found in the classpath C:\bea\8.1sp3\user_projects\domains\gta\gtaServer\stage\_appsdir_gta_ear\gtaweb.war;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-beanutils20573.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-collections20574.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-digester20575.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-fileupload20576.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-lang20577.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-logging20578.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\commons-validator20579.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\jakarta-oro20580.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\jstl20581.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\standard20582.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\WEB-INF\lib\struts20583.jar;C:\bea\8.1sp3\user_projects\domains\gta\.\gtaServer\.wlnotdelete\extract\gtaServer__appsdir_gta_ear_gta\jarfiles\_wl_cls_gen.jar.
          java.lang.ClassNotFoundException: jsp_servlet._presentation._jsp.__link.
               at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:824)
               at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:535)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:373)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:463)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
               at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:312)
               at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
               at org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProcessor.java:274)
               at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
               at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(TilesRequestProcessor.java:320)
               at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
               at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
               at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
               at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
               at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
               at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
               at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
               at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
               at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
          </b>
          I have looked in the '.war' file and it contains the above mentioned precompiled class (_link).
          Could anyone point me in the right direction??

Hi,
          Could you check that whether the jsp file is placed in right place or not ?
          Regards
          Anilkumar kari

Unable to load the newest form from a supplier website.

I regularly acces a supplier website to dwonload blank forms for my business. The supplier has updated some of its forms (usually .pdf but some word) . When I try to download the updated version, it defaluts to the older version. I have tried with other computers and it work fine but not my Imac or macbook air. help

Yes, reluctantly used a windows based with my login and it worked ok. Cannot understand why both my macs are unable to retrieve the latest form. Tried removing browsing history and cookies without success. Problem is definitely on my macs. Suggestions?

Moving of flat file from the application server after upload.

Hi All,
I am uploading data from a flat file placed on the application server by a BDC program.
After the BDC has created the session i want to transfer the flat file from that folder to another folder on the application server by changing the name of the flatfile.
Can any one suggest the best way of doing this particular scenario?
Thanks in advance.
Regards
Satish Nair.

Here is a sample program.
report zrich_0001.
data: d1 type localfile value '/usr/sap/TST/SYS/Data1.txt',
      d2 type localfile value '/usr/sap/TST/SYS/Data2.txt'.
data: begin of itab occurs 0,
      rec(20) type c,
      end of itab.
data: wa(20) type c.
start-of-selection.
open dataset d1 for input in text mode.
if sy-subrc = 0.
    do.
      read dataset d1 into wa.
      if sy-subrc <> 0.
        exit.
      endif.
      itab-rec = wa.
      append itab.
    enddo.
endif.
close dataset d1.
open dataset d2 for output in text mode.
loop at itab.
    transfer itab to d2.
endloop.
close dataset d2.
delete dataset d1.
Regards,
Rich Heilman

Unable to load the flat file from client work station

Similar Messages

Maybe you are looking for