Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again.

Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again. What do I do so no need to keep having to move cursor?THE DOWNLOADING ICON STOPS MOVING UNLESS I KEEP MOVING THE CURSOR AROUND.

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Similar Messages

After upgrading to Airport Utility 6.3 Netflix will not load

After upgrading to Airport Utility 6.3 Netflix will not load more than 20 % of any movie. I get an error code N8202 from the netflix website but nothing seems to help.
Does anyone experience the same thing? (And does anyone have suggestions how to solve the problem)?

Hi and thanks for the feedback.
Well, that was why I was puzzled in the first place, but Netflix couldn't find any flaws in their system (I tried the suggestions in the link Shawn Grinter 2 posted (thanks to you as well, Shawn)).
But today everything is perky and running smooth without me doing anything about it.
Stranger than fiction, but thanks again for taking time helping!
regards,
Kristian

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server.

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.

Try this as a first step; 
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"''''' 
and 
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"''''' 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
While you are in safe mode;
'''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''.

Upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tryed to reinstall still asking for reboot still does not load

Question
upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tried to reinstall still asking for reboot still does not load
what can i do cannot uninstall either
thank you

Question
upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tried to reinstall still asking for reboot still does not load
what can i do cannot uninstall either
thank you

Republished entire site–7 out 14 podcast not loading

After updating iWeb, I republished my site that I had been working on. www.rcogop.com the podcasts are under RCOGOP Sermons. All of these podcasts were created in Garage Band using the same file by dragging the main track out and replacing it each time, export to iTunes, Convert to mp3 to cut down file size, rename, placed into iWeb via the media browser, published to my server account via FTP .
All of these podcasts are newly published at the same time. The three at the bottom of the list work and the four at the top of the list work. The four in–between do not work. The page for the podcast opens as usual. Where the controler bar should be, is a transparent Quicktime icon.
The actual media files are on the server and will play in Safari. If I log into my FTP account via Safari and click directly on the file it opens in a new window and plays.
This is what's puzzling me. If, I open the site from a folder on my computer everything works. It is only when I publish it to the Server that it doesn't work. Note again only some podcasts do not work.
Apple Care tech''s told me to delete everything on my server and republish. I did all 86mb. Takes a while with a 256kb upload speed.
Why would some of these podcasts not link correctly?
Has anyone else had this trouble?
Any, help is greatly appreciated. Thanks for your time!
Imac 17" –1.8 G5, GeForce FX 5200 Mac OS X (10.4.6) 2 GB Ram

I created a new podcast series and started from scratch using the same format the same audio files the same everything. I basically copied and pasted all of my text and images over from the old series.
(The only changes)
1. Instead of using the media browser, I drug the audio straight out of the finder.
2. I renamed the audio files with shorter names, no spaces and no hyphens,commas,apostrophes etc...
3. I noticed some of the dates did not match from the entry to the entry list. I corrected them. NOTE (This did not affect the podcast working. Some of the ones with unmatched dates DID work. All of the ones that DID NOT work had dates that matched in both the entry and the entry list?)
After I finished the new series, I deleted the old one, saved (+S), published to a new folder and uploaded the site after deleting everything on the server again.
(My Suggestion)
1. DO NOT edit a podcast series created before the 1.1 update after updating iWeb to 1.1.
Start a new series
(Comment)
I like iWeb for its simplicity.
I don't like not being able to view the HTML for trouble shooting.
But, I suppose that goes beyond simple.

HT4718 I upgraded to Mavericks and my mail application does not load and give an error screen.

Mail application does not work after upgrade to Mavericks.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

I upgraded to FF4 and my Google Toolbar does not show.

I have checked to ensure the check mark is next to Google Toolbar under and it is. I have checked to ensure that Google Toolbar is enabled and it is. However, when you look at my screen there is a space where Google Toolbar should be but it is not visible.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

PSE10 alternating loading and not loading

Oh computers, computers! They are amazing things but yet cause me so much pain! I have successfully put PSE10 and all my photos on my new PC without hitch. Just as I was sitting back with a smug self congratulatory grin on my face, I have noticed that the program will load up fine the first time (set to launch organiser), then if I close the program and re-open it just opens in the task bar below and won't show on the screen. I simply right click and close (I get no restore option), then relaunch the program and hey presto it opens fine. I can repeat this cycle of closing and opening and the alternate full opening and just in the task bar happens consistently.
I know it's not a major kick in the teeth, but I would like to not have to go through the double opening saga every other time. Any ideas?
Thanks in advance.
Mark

Bypass the Unwelcome Screen by creating Desktop shortcuts for the Organizer and the Editor, and restarting your computer.
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
The Unwelcome Screen leaves a zombie process running which prevents the actual program from launching again.
Ken

Edge Animate .oam files taking a long time to load or not loading at all?

http://pierosalardi.businesscatalyst.com
Is there a way to correct this? I have exported this Muse Site and uploaded into my server and the same thing is happening: http://pierosalardi.com/animate/ Its taking to much time to load the .oam files and sometimes they do not load at all.
This is a screen shot after reseting Safari and going to the site. If you see, there is no logo on the up right hand corner, or the icons at the bottom of the page
This is another screenshot after reloading the site. Some how all the .oam files came together but only after reloading the site.
Is there a way to correct this? I saw in another post that needed to replace the iFrame on the Muse html file and replace it with the html code generated by Edge.
Couldn't get it to work.

Hey Piero,
Love your site! I'm not seeing the loading issue, but I'm also on a fast connection so that might be it.
Took a look at the source - it looks like each button is it's own individual OAM file, which increases your load time due to the extra requests the browser has to make to load everything. Have you tried consolidating the left and right button groups into two Animate projects instead of having a seperate one for each button? This may solve your loading problems.
You can copy and paste between projects inside of Animate so aggregating the buttons into one file should be pretty snappy.
Sarah

Data loads is not picking up all records

Hello, wonder if anyone ever encountered the following problem. I've been trying to load a flat file to BPC and for a year now, we've had no issues. This time however, it seems that not all records were loaded, eventhough the status indicated the correct number of rows were successfully loaded. Any ideas what may be causing this? I've checked the conversion files, account dimension and nothing has changed. Any help with this is greatly appreciated. Ideas on how / where to check for potential trouble spots are all welcome.
Thanks in advance.
David

Hello,
If you are using the standard SSIS package import, the rejected record should be reported into the log file at the end. However, in order to see if there are rejected records or not, you can try to validate your transformation file using the same import file.
You can also verify also the temporary files generated into D:\BPC\Data\Webfolders\APSHELL_Sorin\Finance\PrivatePublications. In this way you can find the right calues imported into the cube.
How you check if data is loaded or not?
Best regards,
Mihaela

"Load Environment" not loading in RoboHelp 7

If you save an environment, exit RoboHelp 7, then open
RoboHelp and click File > Load Environment, RoboHelp hangs and
doesn't load the environment. I've set up several and it hasn't
worked since I installed RoboHelp a year ago. I didn't see anything
in the KnowledgeBase about it. Does anyone have a solution?

Hi Gina
I see Peter asked this initially but I'm not sure your answer
was clear as to whether you were saving your Environment file
locally or not. What you replied with was that you were "running
locally". There is a huge difference between "running locally"
(ensuring your project is stored on your local C drive and not on
the network) and where you are choosing to save the environment
file.
When RoboHelp tries to save the environment file, it attempts
to save in the "My Documents/My RoboHelp Projects" folder.
Sometimes we see that our lovely little Network Admins
arrange Windows so that this location is stored on a Network Server
as opposed to our hard drives. While this may make sense to them,
it may also cause us grief with our applications.
You might try changing the location to point simply at C:\
(or create a folder off C:\ - perhaps C:\Projects) and see if it
will save in that location without locking up RoboHelp. I believe
this is what Peter asked about when he asked if you were saving the
environment locally.
Please post back with whether this works or not.
Apologies if I misread your responses and you intended to
convey that you indeed had tried saving the environment file
locally. I don't believe there is anything in these beasties that
is "Project Specific". The only thing that may make sense to me
about a large project is that it's causing more resources to be
used on the PC where you are opening it.
Cheers... Rick

Upgraded to iTunes 11. Now, I can not sync my music to my iPhone 4S (iOS 6.0.1) Apps, movies and videos sync OK. Music is the problem. Tags are correctly check-marked. Any ideas ???

Upgraded to iTunes 11. Now, I can not sync my music to my iPhone 4S (iOS 6.0.1). Apps, movies and videos sync OK. Music is the problem. Tags are correctly check-marked. NO ERROR MESSAGE THOUGH. Just a No Content in the Music App in the iPhone. Any ideas ???

Bump!

I have a ipod touch and some of the games I am down loading will not load all the way. What is wrong and what can I do to fix the problem so I can get the app to download?

What can I do to fix the problem of my apps not loading completely?

What do you mean by: "not loading completely"?
Maybe this:
- Reset the iPod, nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- The remaining items of:
iOS: Troubleshooting applications purchased from the App Store
- Last, restore the iPod

Safari on MacBook Moves V..E..R..Y Slow & Sometimes Will Not Load Pages

My Safari has been moving very slow lately. Some pages will not even load on my MacBook. I thought maybe it was the connection, but when I go to my iPhone, the same pages load right away. Close to 75% faster than on the MacBook (if it even loads the page).
I am not sure what to do.
I checked the AirPort and it always seems to be scanning. I am not sure if that is normal or not.
Can anyone help me or point me in the proper direction to resolve this situation?
(It took ten minutes for the Apple Forum page to load!!! I almost went to my iPhone to post this message!!!)
Thanks!!!!
Dan

Hi Dan!
First, check your hard drive - is it full? (In Finder, click HD icon once to select it, then choose "Get Info" from File menu and compare drive capacity with space available.) If you have less than 10-15% available space, your drive is full and you have no room to download web pages.
If that's not it, try the "Reset Safari" command in Safari menu. That will clear cache, history, cookies, etc. which can slow Safari after a great deal of use.
If that doesn't do it, post back and we'll try something else.
Good luck!

IOS 5 is causing my 3rd Gen. Ipod touch to freeze, slow down and not load music

On I-tunes I have been adding music but it doesn't work and my ipod is extrememly slow to react when I touch something, like a 3 second delay. It also says that I have 3.5 gb full of "Other" stuff, what is that "other" stuff? Also my games won't open. Can I change the software back or do I need a new I-pod?

Mine was a normal size then when some apps crashed and burned and in the midst of synch and such, got to be 3.5GB and finally 4.1GB.
At that point I tried - or it did I should say - when I moved to another computer.
Using Wifi to sync and restore is slow and terrible. What takes 30 minutes turned into 4 hours and counting.
Using the cloud may someday make sense and WORK better but for me, I have one ID and 3-4 computers (varies) and 4 are authorized. And I just want to stop wasting time on iOS / Cloud / iTunes and be able to use my device and my media if I want.
Twitter integration sounded great, but i use UberTwitter and other apps, and those are not "integrated" and prefer my default browser Opera. Or maybe iCab Mobile. But there is no such thing as "switching" default Twitter or browsers. Yes. TwitterDeck is also nice and each 'twit app has its own features and strengths. Why they can't be primary. Need a new free-browser-from-OS again.
I added one or two apps on iPod that when I then connected to iTunes would cause the iPod to dismount until I deleted them from the iPod.
There are compatiblity issues with apps + iTunes + devices.
Could also contrubute to expanded size of Other.

Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again.

Similar Messages

Maybe you are looking for